MegaWorks THX 5.1 550 QUESTION

Can somone tell me a little bit about the MegaWorks THX 5.1 550 speaker system? Im just curious how well do they sound. And if the bass rattles the floor boards?
Message Edited by surfmonkey on 05-06-2006 10:38 PM

I have had this speaker system for 3 years. All I can say is that I have totally enjoyed the system. The highs are crisp, but I would not say the base is clear and thumping. It does suffer from some muffling depending on the sound. You can always tweak settings to your liking. I currently have an issue with the fuse blowing on the powered sub. Trying to figure this one out. If you can find a system on the cheap, I would buy it.
Good luck.
Mike

Similar Messages

  • MegaWorks THX 5.1 550 control

    Well i got the MegaWorks THX 5.1 550 and i dont have the control because im buying it off a friend who lost it (dont know how ) but is there anywhere that i can buy it?

    Well i sent an email yesterday and i got a reply to call them and get a replacement yay XD fast reply

  • Hello, i wanna buy a wired remote of a MegaWorks THX 5.1 550

    Hello, i wanna buy a wired remote of a MegaWorks THX 5.1 550 speakers.system the system work properly but i cant switch on it without remote.
    Thanks/mw.jpg

    I need a remote for my Inspire 5300 5.1

  • Replacement speaker cables for Cambridge soundworks megaworks THX 5.1 550

    Hi i'm looking for 2 x 5 metre speaker cables for the Cambridge soundworks megaworks THX 5.1 550 has anyone got any ideas on where to get them,have check creative shop on creative web site.thanks

    Also, one of the wires has packed up and I cant find any on creative's website... It is speaker to sub lead, plugs into sub with a Jack and splits into 2 different wires (black and red) to make 2 separate connections to the back of the speaker. Anyone know where they are sold (dont really fancy getting my wallet raped by PC World)?
    Cheers

  • Megaworks THX 5.1 550 Fuse

    A simple question but one that I can't find the answer to anywhere - what size fuse does the powered sub-woofer have? I know from the manual that it's a 250v but what ampage? I assume that it's a 20mm fuse?Mine has blown and I need a replacement ASAP. Rich

    Should say in very small and hard to read writing on the side of the fuse (metal bits). I have a Gigaworks S750 and it has a 3.25Amp Time-delay fuse if i recall correctly. Couldnt speak for yours im afraid. The time-delay bit is important for subwoofers (well, amplifiers), so make sure the one you get is.

  • Cambridge Megaworks THX 5.1 550

    Hey All,
    Ok this has changed alot since i was last here.
    Basically i got speakers 3 years ago from Creative. The volume control continually died and i was messed around for an entire year
    BEFORE
    I got my new speakers to say sorry for the fuss which was a set of the above speakers
    Now im in third year at University and i have a major digital project to work on.
    And for some bizarre reason, this morning i turned on my PC like usual and my speakers are completely distorted.
    Im sorry yeah, but these speakers are meant to be good. When i got them "I want something thats just going to last with 5.1 sound until after my final year when i can actually afford to replace the crap Augidy card (with the drivers that dont work) and the creative speakers for a better make such as ASDA - Smart Price.
    There is no way any representative from Creative can reply to this and tell me that every piece of hardware i have had from creative has either been dead on delivery or breaks within 9 months has been my fault.
    I wouldnt even mind but its not like i rag my system at full blast.
    The drivers are not the problem. I have just spent all morning using the official drivers, modifying the Audigy 2 drivers, used the KXAudio driver and tried another 2 random drivers.
    I have on board Nvidia sound, i tried using that instead of my soundcard.
    Distorted.
    I removed the speakers from my PC and attached a Aux from my TV to my speakers.
    Distorted.
    So basically the speakers are dead yet again. Yet again. Do creative products really have a life span of 9 months?
    I cannot afford to wait around like i did last time where it took 2 months and 2 failed modules just so i could get my work done.
    I really need this fixed as soon as possible. I have done nothing to abuse these speakers and if anything i have made sure no one abuses them on full blast and still it dies.
    This is obviously awkward due to the fact my original system invoice has a different set of speakers. Although i did end up working my way to the top of the creative support team. Something im not prepared to waste time, money and effort on again.
    I need someone to start helping me with a replacement system as soon as possible. I have no hesitation to be a **bleep** like last time either if i feel im being mugged off which i hate to say, seems to be creatives set of values. Build pish hardware with no working software and then send the customer around in circles with promised phone calls, ignored emails and generally just ignoring the user after a product is purchased.
    All i need is to pass my degree and then me and creative can go our seperate ways. Again this is an on going problem so starting at the bottom of the technical support chain is of no interest to me. I refuse to pay 50 quid to send back faulty speakers, fair enough if i had anything to do with the death of them but i didnt. As far as im concered sending me speakers to have yet more headaches over is something that i wont tolerate.
    Any help would be grand.
    Cheers.
    Clark.
    Message Edited by a-scotsman on 06-05-2005 01:36 PM

    Also, one of the wires has packed up and I cant find any on creative's website... It is speaker to sub lead, plugs into sub with a Jack and splits into 2 different wires (black and red) to make 2 separate connections to the back of the speaker. Anyone know where they are sold (dont really fancy getting my wallet raped by PC World)?
    Cheers

  • Creative MegaWorks THX 6.1 550 watt wired remote replacement

    Hello. Does anyone know where I can purchase a replacement wired remote for my Sound system?Any help would be appreciati've

    I need a remote for my Inspire 5300 5.1

  • MegaWorks THX 5.1 550

    If I have this speakers, am I need a receiver?
    I have a sound card with anlog outputs, am I need a receiver or the speaker have a amplifier?
    Thanks.

    Pretty much all PC speakers have a built-in amplifier. Just connect the cables from the soundcard to the inputs on the back of the subwoofer and you should be set.
    Note that you'll need a soundcard that supports at least 5.1 output to use all the speakers of the system.

  • MegaWorks THX 5.1 550 Doesn't power on..

    It just quit powering on. Any ideas? Any fixes? How do you send this out of warranty item back?
    Help!!!

    stuttsy,
    You would need to contact technical support and discuss out-of-warranty repair options with them.
    Daniel

  • MegaWorks THX 5.1 550 Speakers power light comes on but no sound

    Grand kids were watching movies on my computer system this summer and my speakers no longer work. When my wife booted up the computer she heard a loud pop and since then I have had no sound. Checked the sound card and needed to install new drivers for it to work but still nothing from the speakers. Sub woofer used to pop (softly) on boot up but nothing now. Power indicating green light is on.
    Any suggestions?

    Hi Amisk4746,
    Can you double check the connections? Disconnect your speakers system and test the individual line outs of the sound card/onboard sound using a pair of earphones. If possible please test speakers system with another computer, that should tell you if it is working properly.

  • "Conection Problem" M.Works THX 5.1 550+DP-3012 DVD-DIVX Player

    Yesterday i buy a bundle of creative products that contains CREATIVE MegaWorks THX 5.1 550+CREATIVE DP-302 DVD-DIVX Player. I think i cant connect them correctly be kose
    i cant get any sound from the center satelite and the dvd player sign just 2 icon (stereo)
    i try everthing but it doesnt works. Please heeeeeelp. Im near to madness.

    That's funny! Do u mean u cant get any sound from front LT & RT speakers but yr rear speaker and centre speaker all have sound when playing vcd, mp3 etc?
    Try changing different audio input (like setting it to left, right or stereo channels) from yr dvd player and try.

  • Megaworks THX 550 not working...someone help?

    I have the megaworks thx 550 system. never had a problem until the other day when i had it on and it "popped" and stopped working, the power light started blinking for a bit but then it just stopped all together. won't even turn on now, is this something i have to get fixed or am i just S.O.L.

    Make sure the settings your email provider needs are correctly set up in Mail. The server names, ports, etc., have to be set up correctly. Usually the info will be online. If you look in their support area, you may even find specific instructions for setting up Mac Mail.
    Are you saying you're using Outlook as well as Mail? The "outlook account" comment is a little confusing.

  • Can i run Megaworks THX 550 5.1 speakers in 2.1 mode???

    Can i run Megaworks THX 550 5.1 speakers with only 2 satelites plugged in (in 2.1 mode) without damaging the amplifier etc?
    the reason being is when i have the speakers in my study i cant run the cables for a 5.1 setup...
    thanks...

    It is supposed to work that way - stereo sound (mp3's, CD's) will be played in 2 speakers unless CMSS is activated.
    My guess is that you music player that you was using was having an add-on that did provide 5. emulation from a stereo source independent of Creative drivers. And now you forgot to install that add-on (depending what you was using before there are many options).
    Anyway the drivers alone are acting properly.

  • Reliability of Megaworks THX 550 Compared to Gigaworks S750

    Due to some issues that I have had with the purchase of the Megaworks 5.1 speakers, particularly the connectivity between the X-FI Elite Pro console & the Megaworks subwoofer, I have come to a final agreement with CL to replace the subwoofer with the subwoofer from the S750, plus receive an additional two satelite speakers.
    The advantage of this is that while it will not solve my connectivity issue, it will give me the 7.1 sound suround that I do not have by using the Megaworks THX 550 (the S750 is no longer available in Australia so I couldn't buy it in the begining) . That my satelite speakers will remain part of the old 5.1 system is said not to be an issue.
    However, after reviewing the psots, I a wondering if I am making the right choice? I haven't heard of too many problems with the Megaworks subwoofer stop working, but the S750 seems prone to it.
    SO I am just curious as to people's views
    Thanks

    Cartrefconsulti wrote:
    Due to some issues that I have had with the purchase of the Megaworks 5. speakers, particularly the connectivity between the X-FI Elite Pro console & the Megaworks subwoofer, I have come to a final agreement with CL to replace the subwoofer with the subwoofer from the S750, plus receive an additional two satelite speakers.
    The advantage of this is that while it will not solve my connectivity issue, it will give me the 7. sound suround that I do not have by using the Megaworks THX 550 (the S750 is no longer available in Australia so I couldn't buy it in the begining) . That my satelite speakers will remain part of the old 5. system is said not to be an issue.
    However, after reviewing the psots, I a wondering if I am making the right choice? I haven't heard of too many problems with the Megaworks subwoofer stop working, but the S750 seems prone to it.
    SO I am just curious as to people's views
    Thanks
    well as long as it will work with your soundcard I'd go for it

  • Megaworks THX 250-D 2.1 Question...

    I have a Creative Megaworks THX 250-D 2.1 Speaker system and every time I shut down my computer then start it back up again, I have to keep pressing/clicking my little volume control like 20 times just to get it up to 4 bars. Is there a way that I can set it so when I press the on thing it auto goes up to 4 bars bec when I press on, it starts with I believe 2 bars.
    It's the volume control thingy (dunno name).

    That is normal. It`s for precise volume/sub/treble adjust.No,there is no way it will go 4 bars up with one click.
    Just hold down the button.
    Message Edited by 4Digital on 11-22-2005 12:35 PM

Maybe you are looking for

  • Publish calendars in iCal 4.0.4?

    In one of the recent upgrades, iCal changed from publishing calendars to "sharing" them. I want to embed an html snippet with my iCal in it, but if I can no longer publish my calendar it won't work. Is there a way in iCal 4.0.4 to publish a calendar,

  • Boot camp error installing Windows 8.1 "An unexpected I/O error has occurred"

    Well, just like it says on the title, when im going to install windows 8.1 in my MBP (late 2011 13" i7) it gives me a blue screen and the message "RECOVERY There was a problem with a device connected to your PC An unexpected I/O error has occurred Er

  • Magic Quick Selection Tool NOT working right. Help please?

    We've used the magic quick selection tool lots and most of the time it works well. It's very slow.............. v  e r y slow and I'm wondering if there's a patch to download from Adobe or what to do to fix this.  We have pictures to edit and it's ma

  • Images in button not shown properly

    I have imported a quicktime file which was exported from FCP. The final cut portion is strictly jpeg files, no movies. I have made chapter markers in FCP. So in DVD Studio Pro, I created a button and chapter index, then selected a template. When I go

  • Copy a cd to a blank cd

    Is there an easy way to do this with the regular mac software or is it easier to buy a product that does this? Recommendations? I found the disk utility confusing at best.