Mehrere Motion Tracker in einem Video anzeigen und spechern.

Hallo Leute,
ich bin absoluter Neuling was after effects angeht.Ich möchte mehrere Punkte auf einem Video Tracken.Es kommen ca. bis zu 10 tracker zusammen.
Frage: Wie ist es möglich das Video mit den vielen Trackern abzuspeichern.die frage ist eigentlich auch wie bekomme ich es hin das die Tracker die platziert wurden in der gleichen Zeit auch in dem Video angezeigt werden.
Im moment ist es so ..das ich mehrer tracker gesetzt habe, jedoch muss ich immer wenn das Video läuft den Tracker den ich gesetzt habe unten anwählen..Das heisst von Sekunde 00:00 - 00:35 läuft tracker 1
von 00:35 -01:22 läuft tracker 2 von 01:22 - 02:12 läuft tracker 3 usw....
wie kann ich das Video so speichern das die Tracker gesetzt sind und zu den jeweiligen abschnitten auch automatisch angezeigt werden??
leider komm ich gerade gar nicht weiter und hoffe ihr könnt mir dabei etwas helfen.
Desweiteren wäre es schön zu wissen  wie ich die Trackerpunkte mit einem anderen Bild erstzen kann...???
vielen dank

Das ist nix, was man nicht in der Hilfe nachlesen könnte. "Anderes Bild" ist einfach eien andere Ebene, der du die Trackingdaten zuweist und gut ist. Und genau damit erledigt sich eigentlich auch deine zweite Frage - es gibt keine grund, alle Tracker zur glkeichen Zeit sehen zu müssen, weil man die Daten den Ebene (oder alternativ einem Effektkontrollpunkt) zuweist. Also nochmal in aller Deutlichkeit: Lies einfach mal die Hilfe. Das sind Basics und wenn's schon daran scheitert, wirst du nie was gebacken kriegen.
Mylenium

Similar Messages

  • Possible to do the 3d motion tracking text in video with only adobe products?

    I am very interested in doing some 3d text in some video with motion tracking, such as you see in the opening shots in the show Fringe.
    You will have a scene of maybe a street in the city, the camera is looking forward and moving, you have 3d block text that seems to be just hovering there up off the ground but looks like a real physical 3d object in the shot as the camera moves around.
    I have been looking up tutorials for this in After effects on youtube but they always use other non adobe products as well such as boujou or 3ds max,  I am wondering if it is possible to make the same shot with only adobe products. If so, what whould I use other than after effects.  And lastly, can anyone point me to a good free tutorial using only adobe programs if there is one out there?
    I have seen one video of someone adding text to a moving video but it was flat or plastered onto a wall and not the nice block letters that look like a sculpture in the video.
    Thanks.

    I am wondering if it is possible to make the same shot with only adobe products.
    No, you can't and that settles all your other questions. For tutorials, refer to VideoCoPilot's matchmoving and set extension stuff, but even then you will need to at least use some comemrcial third-party plug-ins.
    Mylenium

  • Wie kann ich mehrere y-Achsen in einem Diagramm per Skript anzeigen lassen?

    Halllo!
    Ist es möglich mehrere y-Achsen in einem Diagramm anzeigen zu lassen? (nicht als n-Systeme)
    Wenn ich die y-Achsen manuell im Report erstelle und skaliere, funktionierts. Übers Skript wird aber immer nur die erste Achse und die Kurve auf der ersten Achse dargestellt. Die anderen Kurven liegen dann auch immer auf y1 und werden wenn man das Dialogfeld zum Schaubild einmal geöffnet hat auch über der ersten Achse dargestellt.
    Ich hab die Achsen erstellt und die Kurven zugewiesen und dann übern Aufzeichnungsmodus eingefügt.
    Kann mir jem helfen? Vielen Dank schon mal und viele Grüße.
    Skript:
    Attachments:
    Skript_y-Achsen.doc ‏77 KB

    Hallo ka05,
    du musst die Y-Achse zuerst mit "GraphObjYAxisNew" erstellen. Beispiel:
    Befehl: GraphObjYAxisNew
    <script src="pdf.js" type="text/javascript"></script>
    <script src="ms-its:diadem.chm::/expand.js" type="text/javascript"></script>
    <script src="ms-its:diadem.chm::/Tools.js" type="text/javascript"></script>
    <script src="ms-its:diadem.chm::/FeedbackLink.js" type="text/javascript"></script>
    <script src="ms-its:glang.chm::/lvversion.js"></script>
    Dim AxisNo
    Call GraphObjOpen("2D-Axis1")
    AxisNo = GraphObjYAxisNew("left")
    If AxisNo>0 Then
    Call GraphObjOpen(D2AxisYObj(AxisNo))
    D2AXISYTXT ="My new axis"
    D2AXISYTXTFONT ="Arial"
    D2AXISYTXTCOLOR ="red"
    Call GraphObjClose(D2AxisYObj(AxisNo))
    End If
    Call GraphObjClose("2D-Axis1")
    Gruß
    Walter

  • Motion Tracking - Match Move, getting messy edges around superimposed video

    (Motion 3.0.2)
    I'm using the "Match Motion" menu option under "Motion Tracking" - "Add Behavior" to superimpose a video over a flat screen in the shot. This is working great except for one issue. Around the edges of the super imposed video there is a flickering light that persists. NOTE: The flat screen does display a basic white graphic on it and initially it seemed as though this was leaking through. However, I'm not convinced this is the case as I've stretched the four corners well beyond the underlying white screen and the problem persists.
    Pretty sure I went through the proper steps, i.e analyze etc. and the superimposed video does play fine, just the edges are not very clean.
    Any feedback would be appreciated.

    Thanks, I did set the "Render" to "Best", hit Analyze again, saved the file, went back to my FCP project which contained the file/clip, had to render again.....but got the same results, might be a touch improved, can't really tell. Maybe I'll start over and just cover the entire flat screen tv w/ the video to ensure that none of the white image from the tv seeps around the edges??

  • Motion tracking is not working for videos but works for images?

    Motion tracking is not working for videos but works for images. When the videos is drop onto the tracking object the videos corner don't appear highlighted. I am working on windows 7 with version 13.1.

    ivanhoeeurope
    Are you within 30 days of purchase for the Premiere Elements 13? And, did you purchase as a download from Adobe? If so, you can
    apply for a return/refund for 13. If you purchased elsewhere, then you would be governed by the return/refund policy of the seller.
    Adobe no longer sells version 12, so you would have to find a vendor who still has it in stock and purchase it. There is no way to "downgrade"
    13 to 12.
    What you may want to do is to download and install the Premiere Elements 12 tryout from the following web site to verify that 12 Motion
    Tracking works for you; whereas 13 cannot with regard to use of video for the Motion Tracking source media.
    Adobe Photoshop Elements 12 Direct Download Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
    Apparently this web site does not sell the tryout. It just makes it available for use.
    Before I posted my reply to you I looked at Motion Tracking with video source media on both Premiere Elements 12/12.1 and 13/13.1 on the same Windows 7 64 bit computer.
    If any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

  • Help with linking a layer to motion tracked video

    Not sure of the best way to describe this. I have a video with shadow in it which only moves slightly when camera pans a little.
    Ive created a static image and removed the shadow in photoshop although could have probably done that using the clone stamp in AE.
    However, the problem I have is that when the photoshop image is imported and I create the mask around the image where my shadow is on the video, the image is not tracked or linked to the video... How do I link it to the motion tracked video so that it moves with the video ?

    Hiya
    Yeah one below.. What you will see is the photoshop file, then the null layer followed by the original footage. In effect I need the photoshop image to track the movement of the camera as when I currently play the video, when the camera moves it looks as though a chunk of grass (the mask) is moving different from the rest of the scene.

  • Motion track only part of a video

    Is there a way to only motion track a small sequence of a video? I have a 5 minute video, and after a minute a house shows up along the road. And I want a text animation to track that house for the 6-7 seconds you can see it. But if I add a 3D camera tracker, it adds to the whole video, and that takes forever...

    Duplicate the item. Trim it. Use the camera tracker on the trimmed duplicate.
    This is rather basic, so I'm guessing that you'd benefit from going through the basic getting-started materials before going further:
    http://adobe.ly/AE_basics

  • Motion tracking and exporting layers with the background video

    Is it possible to apply the motion tracking data to a new object in a new layer and then output, or export, that layer as an overlay plane (or perhaps in the alpha channel) so that the new object can be interactive (perhaps in a flash swf format)?
    I would like to create an interactive layer of objects (created through motion tracking) above a background video layer.
    Is After Effects the right tool for this job?

    You are severely oversimplifying the matter. Interaction means establishing rules and this in turn requires programming. Ergo, you absolutely cannot avoid Flash and ActionScript. You can certainly do the tracking in AE and then use CS4's "Export to Flash" feature to get the raw setup into Flash, but the work doesn't stop there. For older versions of AE you will need alternate ways to import the tracking data, e.g. by ways of text files, but really, this is much more a Flash topic than one for the AE community, so better ask your questions there.
    Mylenium

  • Winkel Messen in einem Video

    Guten Morgen ich bin auf der such nach einem Programm, das es mir ermöglicht in einem Video winkel zu messen.
    Ich würde gerne den Winkel zwischen Unterarm und Oberarm messen, bei einem Bild ist das sicherlich kein Problem.
    Nun möchte ich aber das der Winkel permanet gemessen wird, am besten sollen die Daten auch gespeichert werden, aber das wird sicherlich nicht in adobe gehen.
    Kann Adobe Premiere so etwas ?
    Grüße
    Christoph

    Nö. Aber man könnte's in After Effects machen mit dem Tracker und ein paar Expressions, um die Winkel aus den getrackten Punkten zu berechnen... Ansonsten müßte man sich halt Tracking oder Fotogrammetriesoftware kaufen... Je nachdem eben...
    Mylenium

  • Using Windows 8 64 bit Premiere Elements 12 , motion tracker gives me the folloing error; The media file seems to have an invalid entry in the catalog, please rename it for use.

    I'm trying to put a graphic over an object, but I keep getting this error message; The media file seems to have an invalid entry in the catalog, please rename it for use.

    Lonesomeless
    Thanks for the reply.
    I checked the link that I posted back in post 3 of your thread. It is working with at least Firefox and Chrome.
    ATR Premiere Elements Troubleshooting: PE12: Motion Tracking/What To Use To Track Object?
    What browser are you using?
    The blog post contains significant information related to Premiere Elements 12 Motion Tracking. But, if you cannot access it for some reason, then we will need to troubleshoot via communications in the thread.
    SG has asked if you are able to create Motion Tracking effect using one of the graphics included with the program. We will watch for your response to him on that question. Please include in your message to him whether you can obtain your file to track the object using Organizer Tab or Project Assets routes as well as Graphics Tab.
    The following is an excerpt from the blog post referenced....
    SOLUTION
    Various tutorials and online comments have pointed to places other than Graphics Tab where objects can be selected and used to track the moving object in the video when the Motion Tracking workspace is opened in the Expert or Quick workspace.
    Organizer Tab, Expert or Quick workspace to access Elements Organizer 12. Cascade Windows and drag a video or photo from Elements Organizer into the yellow track box of Motion Tracking workspace.
    Project Assets, Expert workspace. Drag text, video, or photos from opened Project Assets into the yellow track box of Motion Tracking workspace.
    Graphics Tab, Expert or Quick workspace. Create a png file (graphic) or prtl file (text) and place it in Clip Arts in the Program Files of the program to have a permanent resource. Then from Graphics Tab, drag the newly created graphic or text object into yellow track box of Motion Tracking workspace.
    Thanks.
    ATR

  • 3D Motion Tracking Error/Crash in progress [Urgent Help Please!]

    Hey there!
    I'm an video editor and I use 3D Motion Tracking a lot but recently every time I use it, it comes up with an error and says crash in progress,
    It never used to do it and I can't seem to find any solutions to fix it.
    Computer Specs:
    Manufacturer: Toshiba
    Model: Notebook
    Processor: AMD E1-2100 APU with Radeon(TM) HD Graphics 1.00 GHz
    Installed Memory: 4.00 GB (3.45 GB Usable)
    System type: 64-bit Operating System, x64-based processor
    So here's how I get to the problem. (I'll try provide as much detail as possible)
    I import a mp4/avi file into After Effects,
    Create a new composition with:
    1280 x 720 (16:9)
    Frame Rate = 30
    Duration = 30 seconds
    Resolution = Third
    Advanced
    Renderer = Classic 3D
    (Boxes Underneath all unchecked)
    Options:
    Shadow Map Resolution = Comp Size
    Motion Blur:
    Shutter Angle = 180 Degrees
    Shutter Phrase = -90 Degrees
    Samples Per Frame = 16
    Adaptive Sample Limit = 128
       3.  Drag the mp4/avi into the composition to use it. (1.21 Seconds Long)
       4.  Right click on it and go to Effect > Perspective > 3D Camera Tracker
       5.  The 3D Camera Tracker initializes with these settings:
    Shot type = Fixed Angle of View
    Show Track Points = 3D Solved
    Track Point Size = 100.0%
    Target Size = 100.0%
       6.   Loads Frames 0% > 100% then as soon as the orange line shows up with Solving camera it shows this,
       and when I click okay it shows this,
       and then finally this,
       and then it crashes. that's the same process every time and it still comes up with this.
       Help would be appreciated !
       Thank you !

    Try rendering an image sequence from your original footage then load that into AE and Camera Track the image sequence. Use the AME to or AE to render a JPEG or PNG image sequence:
    It's important to know that some footage cannot be Camera Tracked. In order for camera tracking to work there must be a significant amount of fixed geometry in the scene. For example, if you have a shot of open water like this it cannot be Camera Tracked:
    This shot also cannot be camera tracked successfully because most of the frame is moving:
    If transcoding or converting the shot to an image sequence does not fix the problem and you don't get a frame rate mis match warning then you could have possibly not given enough memory to other applications in you memory and multi processor settings. Keep memory allocation for other apps in even numbers and make sure that you have not starved the dynamic link server that does camera tracking. If you have the memory 4GB to other apps is absolutely the minimum. If you only have 4GB then give 2 to AE and 2 to other apps.

  • Help with Motion Tracking and Masking?

    Hi. First and probably only post here. I've got a bit of an issue....
    I'm trying to create "snapshots" in my video that are created from masks which are then motion tracked and remain stationary. Here's a video of what i'm talking about... http://www.youtube.com/watch?v=9OhVAduuJc8
    The problem I'm running into is that after i motion track the layer, select a null object as the target, duplicate the video layer, mask the object, freeze frame, and pair it to a null layer, the object does not remain stationary as the ones in the video do. Instead it moves WITH the null object and I cant figure out why. I've gotten a tutorial from the guy who made the video, however it's private so i don't know if you guys will be able to see it. http://www.youtube.com/watch?v=zY0QLrMCcGM
    Either way, i followed the tutorial exactly and still to no avail. Are my settings messed up or what exactly is going on? Ive successfully done this project before but now that i'm using CS5, i'm running into these issues. If anyone has any advice i'd gladly try it out and return with the results.
    Thanks so much for trying to help me out.

    Yeah the null is still moving. Will freezing it lock the mask into place while still allowing the footage to play through? And how would i go about "freezing the null"?
    I just dont understand how this person does it in the tutorial, and the mask remains in place. I know you probably can't watch the tutorial cause the user has it set as private, but as far i know his mask stays in place, but uses the null (while still moving) as a tracking device to keep the mask from floating out of control as the camera moves through the shot.
    Sorry if I'm making this rather confusing. It's difficult to explain.
    Maybe it might be easier to explain how you would obtain the result from the video I've posted? Keep in mind I dont have CameraTracker.

  • Problem with motion tracking

    I have Premiere Elements 12 64 bit on a windows 8 machine. I am trying to use the motion tracking feature. I am able to select an object to track and the resulting yellow rectangle follows the object as it moves through the scene. The problem I have occurs when I try to attach a graphic to the item being tracked; the graphic will not anchor itself to the yellow rectangle when dragged onto it, the rectangle does not turn blue. It appears the graphic is added as a static layer and does not follow the object. I have tried it using various video formats with the same result.

    mac2474
    Thanks for the demo. Very helpful.
    I am still not sure if it is the lack of contrast that is not giving you the best results. I tried to use a model with a light gray object to be tracked against a light blue background. Or, if it is those speech bubbles in contrast to other graphic types that are creating problems.
    But, it is more than that. You did not see that yellow/orange box turn blue when you approached it with the speech bubble.
    I found essentially one on one tracking when I used other than speech bubbles. But, whether speech bubbles or not, my yellow/orange box turned blue with the approach of the speech bubble or other graphic.
    Here is what I would like you to try
    a. Repeat what you did, but do not use the speech bubble. Use one of the other graphics under Graphics, maybe the carrot.
    b. Repeat what you did , but use as source an object with more contrast against its background.
    The main thing we have to work on is getting the yellow/orange to blue change as an indicator of what is supposed to be happening. Also, just back tracking to correct is not enough. If a try does not work, start with newly imported files to avoid any unexpected variables until we work out the situation.
    Thanks.
    ATR

  • Motion Tracking?

    I am using Motion 2.1.2 and I want to stabilize a shaky zoom.
    I found this video on stabilizing non-zooming footage:
    http://www.geniusdv.com/newsand_tutorials/2010/03/image_stabilization_and_tracking_with_applemotion.php
    but when I went to 'Add Behavior' there wasn't any 'Motion Tracking' option in the drop down window.
    Is my version of Motion too old to be able to perform this function?

    Okay, thanks for the info. Is there any substitute method of doing this type of thing in one of the
    Final Cut Studio programs that come in the package, or do I need to go out and buy Motion 3?
    Is there a way to upgrade the version I have?

  • Motion Tracking Problem

    Hi im am very new to After Effects Cs4 and i am trying to do some simple motion tracking on some of my videos. When i try to place my track points on a high contrast spot and the click anylize my track does not stay in place and just pounces around the video. I have tried everything to fix this but just cant figure it out. If any one can help please leave a responce.
    Thank You.

    In CS4 a version of Mocha AE is already included. I would prefer this, if the
    AE tracker fails on your shot.
    Here are some video tutorials to get startet:
    http://www.imagineersystems.com/videos?tagFilter=mocha+AE&sortBy=Newest
    Also, I highly recommend to use Mocha in combination with my MochaImport tool.

Maybe you are looking for