Mem speed and board speed confusion

Hi guys I have internet now
Thinking of upgading now to a Q6600 a MSI P35 Platinum
The board supports a bus speed 0f 1333 but only supports ram speeds of 6400&5300
I wanted to use some 8500(1066) but not sure if it's supported?
What gives?

I'm a complete noob in this field
Assuming I'll go for a Q6600 and the P35 Platinum and OC
What speed of memory would be acceptable?
Is it still best for a 1:1 or is a divider acceptable now?
Would 6400 OC to 8500?
Or should I get some 1333 and run in single channel?
I presume dual channel is still the way to go?
I will be going for 4GB.
Was looking at OCZ Reaper 8000/8500 but if 6400 would do the job......
I'm so far behind on OC'ing it's scary
Thanks in advance for your Helps

Similar Messages

Cpu frequency/bus speed mem speed calculator

have made a simple tool which calculates
cpu bus mem speeds depending on
multiplier clock mem ht mem ratio etc.
how do i post the file on this forum so people can try it out ?
or if anyone wants it i will mail it..

hmmz I don't know how to do that either, but sounds like an interesting tool you have there. It is quite difficult to calculate mem speeds on an AMD64 based system. Hope anyone knows how to post a file on this forum!

I am having email problems with the new Lion. stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely. Help

I am having email problems with the new Mountain Lion. stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely. Help
Incoming Mail (IMAP) Server - requires SSL:
imap.gmail.com
Use SSL: Yes
Port: 993
Outgoing Mail (SMTP) Server - requires TLS:
smtp.gmail.com (use authentication)
Use Authentication: Yes
Use STARTTLS: Yes (some clients call this SSL)
Port: 465 or 587
Account Name:
your full email address (including @gmail.com) Google Apps users, please enter username@your_domain.com
Email Address:
your full Gmail email address ([email protected]) Google Apps users, please enter username@your_domain.com
Password:
your Gmail password
The Quick Answer
Follow the instructions below to set up IMAP1 access in most email clients.
Google Apps users, please follow the default instructions unless otherwise noted, replacing 'your_domain.com' with your actual domain2 name.
this is all greek to me. WHAT IS STARTTLS? On the first page of Apple set up there is a TLS certificate and it is marked NONE- should I change it to the long APPLE CERT option? The next page under ADVANCED: THERE IS A BOX SSL MARKED. Then IMAP Path Prefix - I put stmp.gmail.com.. is that right? Port 993 can use this one? as 456 doesn't work and 587 said it wasn't safe. Under AUTHENTICATION I used PASSWORD. Should I have used external client cert TLS?
Please help me set this up securely. Thanks

Apple - Support - Mail Setup Assistant

There are two folders in the My Music folder dedicated to iTunes music: •My Music AppleReceive and •My Music iTunes iTunes Media Music They share many of the same titles, although some duplicates may be mp3 and m4a. Confusingly, neither for

There are two folders in the My Music folder dedicated to iTunes music:
•My Music > AppleReceive
and
•My Music > iTunes > iTunes Media > Music
They share many of the same titles, although some duplicates may be mp3 and m4a. Confusingly, neither format seems to be exclusive to the AppleReceive or iTunes Media folder.
I'm reluctant to playing the "delete one and see what happens" game.
Any theories/suggestions?

BCHeller wrote:
There are two folders in the My Music folder dedicated to iTunes music:
•My Music > AppleReceive
No idea what this folder is. Sounds like it is something you created & named.
•My Music > iTunes > iTunes Media > Music
This is the default folder iTunes uses for music.

HT4145 I want to add airport express. I now have time capsule and I am confuse. Do I setup the express and then time capsule to the express?

I want to add airport express. I now have time capsule and I am confuse. Do I setup the express and then time capsule to the express?

Setup the Express to wirelessly extend the Time Capsule, or vice versa depending on which one is already set up. Or you could use bridge mode which involves using an Ethernet cable or Powerline plugs.

Aperture has a bad memory and has gone confused

Aperture 3.0.3 has a bad memory and has gone confused... or is it just me?
I have several referenced files that are quite confusing.
This is what I see in list view:
Version name: filename
Filename: filename.cr2 (Canon raw file)
Camera model: iPhone (doesn't shoot Canon raw)
The same file in Locate referenced Files-dialogue:
Version name: anotherfilename
Filename: anotherfilename.jpg (not Canon raw anymore)
Both views show the same date. The image is shot with my Canon.
Are you confused? I am.
The bad memory is frustrating. Almost every time I start Aperture I also had to reenter my preferences (thumbnail size, external editor etc). This is discussed in http://discussions.apple.com/thread.jspa?threadID=2565307&tstart=0.
I have some tother issues too. Aperture doesn't help me anymore. It prevents me from doing what I love - making pictures.
I have rebuilt and repaired the library.
I have followed Troubleshooting Basics http://support.apple.com/kb/HT3805.
I'm out of ideas and would really appreciate if you can help me.
Thanks!

Thanks!
No, I'm no importing RAW+jpg and I haven't been editing metadata manually in the library. I don't even know how I would do that. Any suggestions about which appliccation it could be? Photoshop? Painter? Mail?
I have other issues too and that makes me think that there had to be something else too. Face detection is running wen it's turned off and number of versions doesn't show when the settings is set to Show number of versions.

Can someone help if my mail to Mr.Mark Hurd and Board of Directors is ignored?

I purchased a HP All-in-One printer **bleep** fax, scan and copier - Model No.J 5788. In 16 months time the hinges broke. I found no necessary support from India so I used the tool provided on hp.com to approach Mr.Mark Hurd and Board of Directors, HP. The mail was mechanically acknowledged but no action was taken so I sent three reminders using reply mode of the acknowledgement. Still not responded, I called up the office of Mr.Mark Hurd at U.S. from India. The Operator told me that I have to speak to CEO Customer Relations and she diverted my call to someone who told she was an executive. The executive told me that I have to contact India office.
If HP India office, ignore complaint and my mail sent to Mr.Mark Hurd and Board of Directors, do Mr.Mark Hurd or any of Directors on Board, HP don't look in to my complaint?
My complaint and contention is a hinges have to be made of Engineering plastics like ABS and if so done, they would not break for years. It seems the hinges HP supply are made of Bakelite. I asked HP about their specification for use of raw material for making Hinges. I do not know whether HP has specified im-proper raw material to make hinges or some vendor is taking HP for ride? I want HP Board of Directors to look in to it.
Another grievance is, HP provide tool to approach Mr.Mark Hurd and Board of Directors on hp.com but HP India do not provide a tool or email ids or telephone numbers of HP executive to look in to serious complaints. How HP is going to improve products, improve manufacturing process or redressing customer complaints if complaints are not looked into by concerned executives?
It seems that HP does not have any moral standards yet want to claim that they are most ethical company.
Could someone tell me, how to approach Mr.Mark Hurd or Board of Directors sucessfully?

Thank you for visiting the HP Support Forums. This forum is to leave feedback and suggestions directly relating to these message boards. If you have feedback for HP about their products or services, please use the link below:
http://welcome.hp.com/country/us/en/wwcontact_us.html
This is a user-to-user community, and not a venue to receive direct help or feedback from HP. If you have any further questions or concerns, please feel free to send me a Private Message.
Thanks!
Wendy M - HP Support Forums Moderator
Click the Kudos star as a way to say "thank you" for helpful posts.
Be sure to come back and click the 'Accept as Solution' button on the post that solved your issue - it may help someone else.
Rules of Participation

I am new to this forum and a little confused.

Hello. I am new to this forum and a little confused already.
I want to get a sound card that will support asio drivers and the SB Audigy 2 ZS is looking good. It supports asio drivers. My question is what is the difference from a recording point of view between the X-FI extreme and the SB Audigy 2ZS. As far as I can see,nothing. Also where do you draw the line between asio supported cards and non asio cards? The most important aspect of a recording card that works/plays well is the asio drivers. Everything else is obviously related to the more money you spend the higher the sampling rates and maybe even DSP effects.
Anyway the rig I use is used for playing music, gaming and making home DVD.s. The sound quality of a recorded analogue video needs to well recorded and thats where the SB Audigy 2ZS or X-FI Extreme come in.
Regards
Peter.

babyatari wrote:
Hello. I am new to this forum and a little confused already.
I want to get a sound card that will support asio drivers and the SB Audigy 2 ZS is looking good. It supports asio drivers. My question iswhat is the difference from a recording point of view between the X-FI extreme and the SB Audigy 2ZS. As far as I can see,nothing. Also where do you draw the line between asio supported cards and non asio cards? The most important aspect of a recording card that works/plays well is the asio drivers. Everything else is obviously related to the more money you spend the higher the sampling rates and maybe even DSP effects.
Anyway the rig I use is used for playing music, gaming and making home DVD.s. The sound quality of a recorded analogue video needs to well recorded and thats where the SB Audigy 2ZS or X-FI Extreme come in.
Regards
Peter.
"Audigy 2 Zs" and "Audigy 4 Pro"
- ASIO 2.0 drivers for low latency (as low as 2ms) multi-track playback and recording at 16-bit/48kHz or 24-bit/96kHz-.
"X-Fi"'s
- ASIO 2.0 support with direct monitoring at 16 and 24-bit at sample rates of 44.1/48/88.22 and 96kHz.
So, if you record only DVD quality (24-bit/96 kHz) then there are not big differences.
jutapa

How can i disable the 'top sites' cleaning history does not remove this and it is confusing and a risk to privacy

How can i disable the 'top sites' cleaning history does not remove this and it is confusing and a risk to privacy.
It also serves no purpose as sites i want to keep are bookmarked
Is there an alternatively an addon for this

Hi there - nope, this doesnt work either. the options available when I tap and hol are only OPEN IN NEW TAB, SHARE, ADD TO HOME SCREEN
wayne

MSI R5770 @ core speed of 1031mhz & mem speed of 5648mhz

Just got a new toy to play with MSI R5770 What I really like the most out of this card is the DX11 capability, 40nm GPU Chip (runs really cool even at high clocks), Overclockability and most of all "Performance over the Price". A video card which is not that too expensive but has a big headroom for performance.
After buying the video card. I benched it and overclocked it right away, hehehe. No mercy for the VC and pushing it to the limits.From a stock core speed of 850mhz and memory speed of 4800mhz. I was able to overclock it to 1031mhz core speed and memory to 5648mhz This was all on air and no extra fans or whatsoever.
Below was my system configuration for the short quick test
Processor: ES i7 920
Motherboard: MSI X58 Pro-E
Mems: Team Xtreem 1GB 1866mhz (hahaha 1gb only)
Harddisk: WD Raptor
PSU: AcBel M8 670watts
VC Driver: latest one found in ATI's Website
Quote
Here are the screenshots
So inside the package you will find
•Crossfire Cable
•4Pin molex to 6pin VC Power Connector
•VGA to DVI Converter
•Dirt2, Utility CD Driver
Quote
At the rear side of the VC. You will find three types of display outputs
•Two DVI Port
•HDMI Port
•Honestly speaking I dont know the third one hehehe
Quote
And now for a short 3dmark06 run
Score: 17514
i7 920@ 3.6ghz
5770 @ stock
and for finale. all on air
Score: 20049
i7 920 @ 4.0ghz
5770 Core Speed 1024mhz & Memory Speed 5648mhz (1412x4)
Too bad I was not able to use my own rig for the test and I didnt have the time anymore. The i7 920 ES CO stepping was holding me back to OC it to a higher speed.

Quote from: pillboxusa on 20-September-07, 00:20:04
Board: Socket 775 880FSB (MSI MS 7058)
CPU: Socket 775 800FSB (Core2Duo e4500)
The supported cpu on the specs is old and theres no core2 being sold when this board was released.
Theoretically its compatible...
Anybody made a test on any P4boards 775 using Core2 800fsb?
Need second opinion
Check it yourself CPU Support for MS-7058:
http://global.msi.com.tw/index.php?func=prodcpusupport&prod_no=586&maincat_no=1#menu
http://global.msi.com.tw/index.php?func=prodcpusupport&prod_no=154&maincat_no=1#menu

MEM speed not reading right

I just bought a MSI 845GEM-L motherboard. I am using a Celeron 2.4GHz CPU with 512MB DDR333. It reads the CPU speed OK and the memory count is correct but the POST tells me that the RAM is DDR266. Is there a setting I need to change?

Thanks, I'll give that a try. I've been real pleased with all the MSI boards I've purchased in the past and this is the first time I've run across this "Auto Detect" problem.
Ron

Help with mem speed issue in KT6V LSR BIOS

Hi all
In the BIOS of the MSI KT6V LSR board, does anyone know if it is possible to turn off the memory speed setting the puts memory to either Fast, Turbo or Ultra? I am uisng 1 DIMM of TwinMos 512mb, PC2700 DDR Ram and I can't run it at its correct timing of 333Mhz, because I think the above speed setting overclocks the memory and is causing instability in my installation of Win XP.
Cheers
SteveC

Thanks Fredrik & Sliksta.
Firstly Fred the cpu fsb is set to its correct timing of 166 (333 FSB Barton installed) and everyhting else in that screen is set to auto. It seems to be showing the correct CPU speed on boot up, so I can't see the problem there.
The thing is I have flashed the BIOS to the latest version and that memory setting for Fast, Turbo and Ultra is still there and can't be disabled. According to MSI it would be disabled in BIOS update V1.3, because it overclocks the memory and causes problems on some memory. When I run the memory timing at 333 I just seem get instability in Windows and thought it must be down to that timing issue. I have turned down the memory to 266 and things seem to be ok so far. Maybe I'll just stick to that. Strange one really. Could be the memory is a bit duff or I havent flashed BIOS properly. Shoud I reflash it do you think?

P6NGM-L and CPU frequency confusion

Hello all,
Me again. with more questions about my P6NGM-L, BIOS V3.6. These are different questions than in my other topic, so I thought it best to start a new topic.
Anyway, I've just had my E6300 upgraded to an E8500 and it's working fine. However, while both CPU-z and my mobo's BIOS show that it's an E8500 @ 3166Mhz, they also show that the 'current cpu frequency' is hovering around 2000Mhz. I would understand this if I'd had the EIST enabled, but I hadn't at the time (I have now enabled it).
So can anyone tell me what's going on?
Also, while I was looking in the downloaded manual for the mobo to see if it had any info on this, I noticed that it says (somewhere, though I can't find it now. ) 'this board supports overclocking' although of course they don't make any guarantees (Why should they?). I was hoping to overclock my 3.166GHz cpu to 3.33 GHz, but I can't change the Bus speed or the Multiplier. Currently '333MHz and x6' in CPUID and in the BIOS the multiplier is 'x7'.
So is it possible to change any of these things so that I can run the CPU as if it's an E8600, or slightly better?
Any help anyone could give would be much appreciated.

Thanks for the replies Nichrome and XFM.
Nichrome,
I hadn't touched the BIOS for anything to do with the CPU until I enabled the Enhanced Speedstep setting, and before then the BIOS was showing the cpu as 3.16Ghz but showing the frequency as 2000Mhz, after enabling EIST, the BIOS shows both a CPU of 3.16Ghz and a frequency of 3.16Ghz!?
I can't find any way of overclocking the CPU, unless I have to mess about with the memory timings first?
XFM,
I've looked at the link you were good enough to post. I've done the 'My Computer - Properties' thing and it does show two separate speeds. I'm just wondering why my BIOS now (the last time I looked, anyway) didn't show two separate speeds.
I'm sure either this pc or my next one will send me mental.

Slow so i upgraded mem ram and still no faster

my new 2000 hp notebook came with 4gb ram and is really slow so i was told to upgrade it to 8gb and it would speed up my notebook alot. i bought the 8gb ram ($85) and installed it only to find out my notebook is no faster at all. why is that?? how do i make my notebook faster?? its brand new and this is aggrivating

Hi,
Normally from 1Gb to 2Gb you can see a lot faster; from 2Gb to 4Gb a little bit faster but from 4Gb to 8Gb you can't see this unless you open many applications at the same time and switching around specially if your applications support DIM (not frequently loading data from disk, keep data in memory). HP 2000 is a series of many models, what is yours ? What is it OS, 32bit or 64bit. From my testing, using SSD will gain much more benefit interms of price/performance.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I've looked at the FAQ and am still confused

Hi,
Am trying to find out if (not when) we may get BT Infinity to my location in Gloucestershire. I've looked at the spreadsheets and filtered on Gloucestershire. All I can see is in the Coming soon Sheet the following
Exchange Name
SAUID
FTTC/P
Forecast Date
County / Unitary Authority
CHELTENHAM
SSCMN
FTTC/P
Dec-11
Gloucestershire County
HARDWICKE
SSHWK
FTTC
Dec-11
Gloucestershire County
NAILSWORTH
SSNAH
FTTC
Mar-12
Gloucestershire County
STROUD
SSSTD
FTTC
Mar-12
Gloucestershire County
I am not sure if Cheltenham might be linked out to my Post code - 7.5 miles from Cheltenham as we are currently served by the Tirley exchange to GL19 4DS - can I check anywhere else. am trying to work from home and the fluctuating speed can be a real inhibitor.
Cheers
Simon

Hi simon5705,
The http://www.superfast-openreach.co.uk/where-and-when/ website is updated reguarly so it is a case of just waiting.
Do you know if your line is connected to a green cabinet or an EO (Exchange Only) Line? After a Exchange is upgraded and FTTC Enabled, then some of the green cabinet's will need to be FTTC Enabled to allow people on that cabinet to have FTTC fibre broadband.
This link Here ,(click Here), gives some useful links on providing FTTC/H fibre broadband to Rural communities and the Final Third.
The Fibre-Optic Broadband Rollout is being managed and done by Openreach for all communication providers/ISPs.
BT Retail (your communication provider/ISP) has nothing to do with the rollout of fibre broadband.
cheers
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

Mem speed and board speed confusion

Similar Messages

Maybe you are looking for