MEMASSSA error u201Cunlimited indicator should be checked in lineu201D u201Cif fixed qt

Hi All,
When mass update of scheduling agreement line items is done through Tcode MEMASSSA,
the error u201Cunlimited indicator should be checked in lineu201D u201Cif fixed qty indicator is uncheckedu201D arises and ABAP dump results.
unlimited indicator has already been checked and fixed qty indicator also has been unchecked already in that SA line item before doing MEMASSSA ( ie mass update of Scheduling agreement).
However when any mass update of SA line items like checking delivery completed indicator is being done , the following error is displayed:
u201Cunlimited indicator should be checked in that SA line item number if fixed qty indicator is uncheckedu201D
Message log is
Notification ME664 change ELIKZ could not be effected.
If mass update is tried again ,ABAP dump results.
Kindly explain why this error occurs and suggest the solution.
Thanks & Regards,
Hari

Hi,
Make sure that the field is set to "optional" in the corresponding field selecion keys. If you do not know exactly which keys you should check in the customizing, please read the blog:
/people/arminda.jack/blog/2010/02/08/are-you-having-problems-with-fields-that-are-not-ready-for-input-in-mm
If the field is set to optional in all keys, i would recommend to enter a ticket at SAP.
Best Regards,
Arminda Jack

Similar Messages

I downloaded several tv shows on my computer and attempted to drag and drop to my iPod touch. I received an error message indicating that there was a problem syncing to my iPod. What steps should I take next? This has never happened before.

I downloaded several tv shows on my computer and attempted to drag and drop to my iPod touch. I received an error message indicating that there was a problem syncing to my iPod. What steps should I take next? This has never happened before.

Force Quit .
Press command + option + esc keys together at the same time. Wait.
When Force Quit window appears, select the Safari if not already.
Press Force Quit button at the bottom of the window. Wait.
Safari will quit.
Relaunch Safari holding the shift key down.
http://www.thesafemac.com/fbi-ransomware-virus-rampant/

HT204053 In iCloud setup my apple I'd is not accepting. Getting error message it should be an email I'd, but my my apple Id is just in user I'd form? Please support.

In iCloud setup my apple I'd is not accepting. Getting error message it should be an email I'd, but my my apple Id is just in user I'd form? Please support.

I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
Thank you for any help you can give.
Trish

Muse form is not working on godaddy and no error message indicating a php error is occuring. Could something else be wrong? Do I have to manually set the form once loaded to go daddy to direct through their mail form system?

I have read in multiple places on the forum that muse forms are now supported on third party platforms. however I am having a very difficult time getting mine to work on Godaddy. They seem to no longer have the "form mailer" option and told me to look at this PHP: mail - Manual to make the forms work. Muse is not giving any error messages indicating that there is a problem on the go daddy end, the form appears to function but no message is received at email address. can anyone help troubleshoot this for me.
Thanks.

Hey Sanjit & Brad,
Thanks for getting back to me. So, I tried changing the address as Sanjit suggested, and yes an error message came up. But then I tested Brad's theory and looks like the form works with another email address other than that of the actual website email:( So I guess based on Brad's link I should reroute the form to the other (non-godaddy) email...or contact go-daddy to see if they can correct this? Would that be the final answer?
Thanks again!

.error Print indicator 029 not defined. Message no. L3118.

error Print indicator 029 not defined. Message no. L3118
Hello everyone.
I need some help.
when i run program RLVSD40 (Initiate printing of transfer order).
i got error.
Print indicator 029 not defined
Message no. L3118
what should i do to solve this error ?
please help.

Hello,
I am getting the same issue.
Please let me know the solution.

When i'm starting adobe flash professional there is an error 5 what should i do?

When i'm starting adobe flash professional there is an error 5 what should i do?

Can you check the solution mentioned in this thread to see if it helps?
Configuration error 5 (http://forums.adobe.com/thread/628476)
Thanks,
Preran

I am trying to import songs from a CD but it takes more than 15 minutes per song. What should I check?

I am trying to import songs from a CD but it takes more than 15 minutes per song. What should I check?

Do you have error correction turned on? (iTunes preferences - General - Import settings.) If so, it will take much longer to copy audio CD's.

Anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

Hi, couple of things to try...
Anonymous
Post subject: NSURLErrorDomain error -1100 in OS X 10.8
If you check for software updates using the App Store in OS X 10.8 and get "NSURLErrorDomain error -1100" the problem may be with your Software Update preferences. This is particularly likely if you were using a custom Apple Software Update server. To solve the problem, quit the App Store, move the following two files (if present) to the trash, restart, and only then rerun App Store updates:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Library/Preferences/com.apple.SoftwareUpdate.plist.lockfile
http://x704.net/bbs/viewtopic.php?f=12&t=6130
I was recently trying to upgrade to mountain lion through the app store. I have unreliable Internet from a cable company whom I will not name, but we all know who they are. My Internet dropped while downloading the upgrade. Once I went through the notorious unplug the modem/router and plugged it back in to gain Internet connectivity again, I could not resume. No matter what I did, the app store kept displaying "an error occurred." I am hoping that those with the same issue read this first to save them hours of skimming through the Internet to find a solution. Here are the steps to take:
1. Make sure you have reestablished Internet connection
2. Chances are you got frustrated when you tried to resume/unpause the download and clicked the "X" to the left. If so, select the "Store" drop-down menu from the App Store and select "View My Account." There should be an option to unhide your purchase. You know what to do.
3. There is also an option to reset all warnings for buying and downloading under "View My Account." Do this, click "Done," sign out of the App Store and quit the App Store.
4. Open the Preferences in safari and select Privacy. Select "Remove All Website Data." Just do it.
5. Launch the app store and sign in.
6. Now, if you "Check for Unfinished Downloads" everything works peachy.
I hope this helps. Not much I can do for your Internet connection though.
JonEz15...
https://discussions.apple.com/thread/4697970?tstart=120

Internal error 'Period Indicator' (-2024) OPID

Dear All,
Please help me in solving this problem. I am getting this internal Internal error 'Period Indicator' (-2024) OPID occurred on Client system while copying Sales Delivery to Outgoing Excise Invoice. When I am doing the same thing on Server System I am not getting any error it works fine I am able to copy Sales Delivery to Outgoing Excise Invoice. I am using B One 8.8 PL 10
Regards,
Noor Hussain

Hi Noor Hussain,
Please check your another posting and close this one.
Thanks,
Gordon

When trying to restore my iphone its says unknown error (-1) what should i do??

when trying to restore my iphone its says unknown error (-1) what should i do??

http://support.apple.com/kb/TS3694
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

[Solved] PKGBUILD user error prevention vs intrusive sanity checks.

I read over the AUR packaging standards and am pretty familiar with creating PKGBUILDs but I'm uncertain on how to proceed when I need to check a system file so the user doesn't accidently install a package that may or may not mess up their system. I don't know how I feel about checking a user's system files from within a PKGBUILD. To be more specific; I'm maintaining "util-linux-aes" which is the util-linux package with loop-AES support (via patch). As brought to my attention by 'gemon' on the AUR page: http://aur.archlinux.org/packages.php?ID=47060 I should probably check if user has a kernel with loop-AES (loop.[k]o) patched as it may cause harm to their system if they use util-linux-aes and don't have a patched kernel. I'm somewhat torn about how to address the situation. Should a simple echo message suffice, giving warning about installing or should I insert code (as shown below) to check for proper kernel config options?
I thought about adding a kernel config check in a util-linux-aes.install file but if it returns or exits with 1 the package still installs. So I had to migrate the check to the PKGBUILD itself (which makes more sense I guess) and I'm not sure if this is considered an "intrusion" and/or unclean method of dealing with this. To make things more clear, here's my proposed PKGBUILD (current PKGBUILD doesn't have the config check):
# Maintainer: milomouse <vincent[at]fea.st>
# Contributor: judd <jvinet[at]zeroflux.org>
_basename=util-linux
pkgname=${_basename}-aes
pkgver=2.19
pkgrel=5
pkgdesc="Miscellaneous system utilities for Linux, with loop-AES support"
url="http://userweb.kernel.org/~kzak/util-linux-ng/"
license=('GPL2')
arch=('i686' 'x86_64')
groups=('base')
depends=('bash' 'ncurses>=5.7' 'zlib' 'filesystem')
optdepends=('perl: for chkdupexe support')
provides=('linux32' "util-linux=${pkgver}" "util-linux-ng=${pkgver}")
conflicts=('linux32' 'util-linux' 'util-linux-ng' 'e2fsprogs<1.41.8-2')
replaces=('linux32' 'util-linux' 'util-linux-ng')
options=('!libtool')
_loopaesdate=20110226
_loopaesvers=v3.6b
_loopaesdiff=${_basename}-${pkgver}.diff
source=(http://www.kernel.org/pub/linux/utils/${_basename}/v${pkgver}/${_basename}-${pkgver}.tar.bz2
http://downloads.sourceforge.net/project/loop-aes/loop-aes/${_loopaesvers}/loop-AES-${_loopaesvers}.tar.bz2)
build() {
cd "${srcdir}/${_basename}-${pkgver}"
# check for compatability first
warning "You must also have a loop-AES patched kernel (loop.ko) for this to work."
warning "You may end up damaging your system otherwise. Checking now..."
if [[ -f /proc/config.gz ]]; then
if [[ $(zgrep CONFIG_BLK_DEV_LOOP= /proc/config.gz) == CONFIG_BLK_DEV_LOOP=[ym] && \
$(zgrep CONFIG_BLK_DEV_LOOP_AES= /proc/config.gz) == CONFIG_BLK_DEV_LOOP_AES=y ]]; then
msg "Everything looks OK."
else
error "CONFIG_BLK_DEV_LOOP / CONFIG_BLK_DEV_LOOP_AES are not correct, aborting!"
return 1
fi
elif [[ -f /usr/src/linux-$(uname -r)/.config ]]; then
if [[ $(zgrep CONFIG_BLK_DEV_LOOP= /usr/src/linux-$(uname -r)/.config) == CONFIG_BLK_DEV_LOOP=[ym] && \
$(zgrep CONFIG_BLK_DEV_LOOP_AES= /usr/src/linux-$(uname -r)/.config) == CONFIG_BLK_DEV_LOOP_AES=y ]]; then
msg "Everything looks OK."
else
error "CONFIG_BLK_DEV_LOOP / CONFIG_BLK_DEV_LOOP_AES are not correct, aborting!"
return 1
fi
else
error "Cannot find a kernel config to check options, aborting build!"
error "If you're POSITIVE you have a patched kernel, edit PKGBUILD to remove this."
return 1
fi
# if all went well; provide loop-aes support
patch -Np1 -i "${srcdir}/loop-AES-${_loopaesvers}/${_loopaesdiff}"
# hardware clock
sed -e 's%etc/adjtime%var/lib/hwclock/adjtime%' -i hwclock/hwclock.c
autoreconf
automake
./configure --enable-arch --enable-write --enable-raw --disable-wall --enable-partx
make
package() {
cd "${srcdir}/${_basename}-${pkgver}"
mkdir -p "${pkgdir}/var/lib/hwclock"
make DESTDIR="${pkgdir}" install
md5sums=(
'590ca71aad0b254e2631d84401f28255' # util-linux-2.19.tar.bz2
'247e5a909877577bdcd246f8caada689') # loop-AES-v3.6b.tar.bz2
sha384sums=(
'05e8e3a2685ff47c57d56bf9d5bfc9cbe5c1fa85200f403c5ccc08676b9b713fc935b3b040d5d5dcd2c5aa14b631f1bd' # util-linux-2.19.tar.bz2
'48ee55e996464f613d68e04bc661997a846989fef4d8a21fb0647c126c64e5ecdb218a37c75f6d3baccfebb2d89503ea') # loop-AES-v3.6b.tar.bz2
Is it too much [attempting to help the user] by doing this sort of check, is it considered bad practice?
Even if it's ok, I don't know if I'm going about checking this correctly, although in my mind it makes sense. Checking against the kernel config, I mean.
Advice on any of these aspects is appreciated, as I'd hate to think I'd unwittingly let a user harm their computer somehow by not checking or at least warning. Again, my main concern is if this is considered bad practice and if it is what are my alternatives. (if this has been discussed before, I'm sorry, just point me in the right direction, thanks).
Thanks for reading.
Last edited by milomouse (2011-03-04 15:51:50)

milomouse wrote:
@ngoonee:
My first instincts told me as such (also noted on AUR page comments), that a user should well know what this package is and what it does and need not be checked against their system, and those without the knowledge shouldn't be messing with it in the first place. But with another user of the package bringing the attention that some poor user might install this without full knowledge of it's implementation and/or thinking this package by itself may provide loop-AES (unknowing of kernel patch) they might fall prey to unbeknownst side-effects.
I guess a warning message will suffice for sanity's sake [under pre_install(), I guess], as I don't think I should create depends on an AUR kernel with current loop-AES support that I don't maintain myself (otherwise I'd have to follow it's inclusion).
Thanks for the support, though, albeit a bit rough. But for future reference; is checking a user's system files considered OK or should the same rules as this package apply (user knowledge)? I can't imagine every package installing OK without at least one of them checking against a user's current setup.
In general I don't think checking the current system is 'okay'. PKGBUILDs are meant to create packages. There's no reason these need to be created on the same system as they will be installed on (perhaps a chroot would be used just for building, or a buildserver). Or maybe someone may have multiple machines which share packages or the cache.
A depends would be the best option in this case, followed by the warning (the former does not mean the latter is not needed). Your check would fail in the cases I outline in the previous paragraph.

Errors occurred in the integration checks (read log)

Hello Everyone ,
I am working on cross companycode- cost accounting
In the previous screen i said i am not getting cost elements box in transaction code KP06 , anyhow i am entering the itemoverview screen using one cost element which i appearing automatically and in here i am allocating funds to various activity types( here aslo its showing just one cost element as in the main screen of KP06 there was any Box asking me to enter cost element) , so i am giving all activity types with cost element plan fixed cost(entering an amount of 2000for all activity types )
&plan variable cost (entering an amount of 1000 for all activity types) nothing in plan fixed cons & plan variable consum.....remember this is just for practice purpose i am taking these small figures.
Now when i am trying to save this its giving me error which is as follows:
Errors occurred in the integration checks (read log)
Message no. GP542
Diagnosis
The data entered or changed in this planning transaction should not only be updated in controlling, but also in the related applications (such as profit centers).
These applications check the data to be posted beforehand to guarantee that the update is performed without any problems.
However, errors or warnings occurred during this check.
System Response
Data is not updated.
Procedure
Look to see which errors occurred using the function "Error log...",. "Plan Integration...".
Can anyone please help me with this one .
Thanks ,
Mohammed samiuddin

Hi,
I am also getting the same error message when I am trying to post activity type rates using Tcode KP26.
Can you please let me know how you solved this issue?
Error message :
Errors occurred in the integration checks (read log)
Message no. GP542
Diagnosis
The data entered or changed in this planning transaction should not only be updated in controlling, but also in the related applications (such as profit centers).
These applications check the data to be posted beforehand to guarantee that the update is performed without any problems.
However, errors or warnings occurred during this check.
System Response
Data is not updated.
Procedure
Look to see which errors occurred using the function "Error log...",. "Plan Integration...".
Regards,
Vicki

How to update Ipad 2 from IOS 4.3.5 to IOS 5. Itunes won't let me do it because it keeps showing error messages asking me to check if my network is active.

how to update Ipad 2 from IOS 4.3.5 to IOS 5? Itunes won't let me do it because it keeps showing error messages asking me to check if my network is active.

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

What a horrible way to treat customers. I was due for updates on my phones and thought I should maybe check some other prices but have been with Verizon for 20 yrs so ended up there. I got 2 new IPhones 5s and the wife couldn't decide what she wanted so s

What a horrible way to treat customers. I was due for updates on my phones and thought I should maybe check some other prices but have been with Verizon for 20 yrs so ended up there. I got 2 new IPhones 5s and the wife couldn’t decide what she wanted so she stayed with old phone but this locked me into a new 2 yr contract . Within a wk one of the new iPhones started turning on and of like 10 –15 times a day. Wk 2 it turned off and would not turn on again . It was my sons who was in college at the time so we talked and he took it in to a Verizon store where he was told I need to come in since the account was in my name. He was away from home , Verizon could see on account it was his phone they said it was not abused, they could not even turn it on , they sold me the phone give him another phone maybe even a loaner till he gets another. So now I need to go to store and explain to 3 different people this is my phone and my son has it and I need a new one. what a waste of time after about 2 hrs and talking to different people and yes they said there were notes on his account from other person he had talked to from different store. So I finally walk out with a receipt in hand and being told I would have a new phone in a couple days. As I sat in my vehicle thinking this is stupid I looked at my receipt and noticed it said droid on it so back into Verizon I went. The salesman said that’s what your son has on his account. My son had activated a friends old phone so he has one since VERIZON REFUSED to give him one. Another hr 3 people and yes they can see he had a new iPhone and notes on it from other store. Sometimes sorry just doesn't do it. I was now late for a appointment . Now I walk out and have been told I will get a new iPhone in the mail in about 2 wk Yes 2 wks again I bought it there just give me a new one and you send old one back. I will also get a new droid that I have to send back because they said they cant cancel it . In about 3 days I get the Droid and sent it back Verizon mistake and a waste of my time . After waiting over 2 wks and not receiving a new iPhone back to Verizon I went . I am now bitter at Verizon after doing 20 yrs of business with them. 3 people 1 hr later I was told it got delivered to my post office . I got the tracking num called the post office and they say o yes that was the droid. Go back in to Verizon another hr of explaining I walk out being told I will get a new iPhone in a couple of days, We’ll see . Once again I got the phone in your store just give me a new one . Do you realize how much of my time you have wasted ? do you care? O what is Your Policy ? How many Billion did you make last year ? I am Locked into a new 2 yr contract . Why don’t you just release me ? After 20 yrs do you think I will ever renew my contract ?

Simple process. If an iPhone go to the Apple Store and not Verizon
the phone from Verizon will be a refurbished device and not new unless under the 14 day worry free guarantee
good luck

All of my apps are in iTunes AND on my iPod Touch. in iTunes it the checkbox next to sync apps is UNchecked. should i check the box and have to reorganize all my apps or leave it "un-synced"?

all of my apps are in iTunes AND on my iPod Touch. in iTunes, under my iPod, the checkbox next to 'sync apps' (in the Apps page under my iPod) is Unchecked. if I check it, all my apps will be all over the place and I will waste hours trying to get it back to the way it was. I don't really have a reason to check the box but I don't know. should I check the box and have to reorganize all my apps or leave it "un-synced"?
by "un-synced" I mean how it is on my iPod and iTunes at the same time but its not synced
this happened b/c I had to make a new user acct on my only [Windows 7] computer and when i clicked transfer purchases, this happened.
any help would be greatly appreciated
And as you can see ( besides my problem here) i am out of dropbox space. it would be nice if you can click http://db.tt/TQiPs59V to make an acct to give me and you more space

You should ALWAYS make sure that everything is on your computer and backed up, most especially before any update. The iphone is designed to be synced to your computer regularly.
If you have failed to do this, then you need to redownload:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

MEMASSSA error u201Cunlimited indicator should be checked in lineu201D u201Cif fixed qt

Similar Messages

Maybe you are looking for