Member on protection group don't show on scheduled

Hi every one
we have DPM 2012 Server
There are one protection group was created for File Server added one server on this protection ( Server 1 )
The protection scheduled working good.
when I try to add new member for this protection ( Server 2 )
scheduled show only server 2 and server 1 job don't run at all.
need you help.
Thanks,

please check your EventLog for SQL related Problems, maybe there is a Problem with Access right.
also make sure to use the actuall Update Rollup, best would be to Upgrade to 2012 R2 UR4
Seidl Michael | http://www.techguy.at | twitter.com/techguyat |
facebook.com/techguyat |
youtube.com/techguyat

Similar Messages

Email Names/Addresses in Groups Don't Show up

I have some groups which contain members of my address book which fail to show up when sending an email to this particular group.
I have created the group over and over again....although the group has all the correct names and email addresses; it fails to send the email to all the people within the group. Upon close inspection certain names are habitually omitted.
What to do?

Any progress on this?

Slide Groups don't show in TOC

I groupped my slides in Filmstrip, but they are not display as groupped in TOC.

Welcome to the forum,
Did you perhaps activate the TOC before creating slide groups? In that case try using the Refresh button in the TOC:
If you want more than one level in the TOC, you'll have indeed to set grouping and indenting up in the TOC itself.

Event 917 Console Crash when attempting to modify Disk Only Protection Group

Primary DPM 2012 R2 4.2.1254.0 running on Server 2012 -
In the process of decommissioning a number of old servers - I found that I am no longer able to modify a disk only protection group on one of my primary DPM servers. Console crash - noting error 917. I've seen a number of work around in relation to protection
groups with long term storage, but none noting disk only. Notably, kb 2905631 - long term only protection may cause this issue.
Another thread mentioned that re-syncing / consistency checks on the entire server resolved the issue for them, but I find that rather unnecessary. I've over 13Tb of data on this server, and am trying to remove the last 30GB of an old protection group.
Recap-
Error 917 when removing member from protection group
MMC crash with a 999 marked when modifying the protection group
The event log is not noting any service crashes, or the 917 error in the event log. 999 is getting recorded in the event log.
The description for Event ID 999 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
An unexpected error caused a failure for process 'mmc'. Restart the DPM process 'mmc'.
Problem Details:
<FatalServiceError><__System><ID>19</ID><Seq>0</Seq><TimeCreated>12/2/2014 5:40:14 PM</TimeCreated><Source>DpmThreadPool.cs</Source><Line>163</Line><HasError>True</HasError></__System><ExceptionType>SqlNullValueException</ExceptionType><ExceptionMessage>Data
is Null. This method or property cannot be called on Null values.</ExceptionMessage><ExceptionDetails>System.Data.SqlTypes.SqlNullValueException: Data is Null. This method or property cannot be called on Null values.
at System.Data.SqlClient.SqlBuffer.get_String()
at Microsoft.Internal.EnterpriseStorage.Dls.UI.ObjectModel.OMCommon.ProtectionGroup.ReadBackupAndCCWindow()
at Microsoft.Internal.EnterpriseStorage.Dls.UI.ObjectModel.OMCommon.ProtectionGroup.get_BackupWindow()
at Microsoft.Internal.EnterpriseStorage.Dls.UI.ObjectModel.OMCommon.ProtectionGroup.GetPerformanceString()
at Microsoft.Internal.EnterpriseStorage.Dls.UI.ProtectedGroupUIElement.AddPerformanceData()
at Microsoft.Internal.EnterpriseStorage.Dls.UI.ProtectedGroupUIElement.ConstructDetailsPaneContent()
at Microsoft.Internal.EnterpriseStorage.Dls.UI.CommonControls.UISearchableElement.get_DetailNameValuePairs()
at Microsoft.Internal.EnterpriseStorage.Dls.UI.ProtectedGroupUIElement.DisplayDetails()
at Microsoft.Internal.EnterpriseStorage.Dls.UI.ProtectionViewInternal.FillGroupDetails(GroupingListHeaderItem group)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.ProtectionViewInternal.UpdateDetailsPane()
at System.EventHandler.Invoke(Object sender, EventArgs e)
at Microsoft.Internal.EnterpriseStorage.UI.CommonControls.GroupingListView.EndUpdate()
at Microsoft.Internal.EnterpriseStorage.UI.CommonControls.GroupingListViewBody.ProcessClick()
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at Microsoft.Internal.EnterpriseStorage.UI.CommonControls.GroupingListViewBody.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)</ExceptionDetails></FatalServiceError>
the message resource is present but the message is not found in the string/message table

Hi Mike,
That appears to be the case. A row shows NULL for IMCatalogXML. I'm looking at your script to update the value now based on the following thread - thread .
So far, no rows have been modified.
Since I really don't care about this protected member, is this a row I could just delete from the DB, or how to properly update the data so I can remove it from within the confines of the GUI?
Marketing 2011-05-19 18:59:41.917
B7073B10-DDE6-4EA3-BD8C-1E1497C218D5 NULL
NULL 0
0 0 NULL
2 0
NULL
This PG was definitely around back when this server was DPM 2010.
Regards

Some contact e-mails don't show up in groups

Yosemite 10.10.2 OS. Contacts v 9. Macbook Air. I just finished dragging some contacts into a group to use for sending group e-mails. When I go to edit distribution list so I can select which e-mail address from each contact I want to set as default, there are a few contacts who are missing some or all of their addresses. I have checked the contacts email addresses and they are all properly formated [email protected], but for some reason they are not on the list. For contacts with no e-mails showing in the distribution list, they not only do not allow me to select a default e-mail, but those contacts don't show up in the e-mail at all

Never mind. Just found the place to change this under settings. What's weird is the setting got changed on its own somehow but weirder things have certainly happened...

HT204150 I have only 2 choices for contact groups on the iPhone 5, hotmail and iCloud. If I click both then I have all my hotmail contacts which I don't want. However if I only click iCloud, any new contacts I add don't show up :(

I have only 2 choices for contact groups on the iPhone 5, hotmail and iCloud. If I click both then I have all my hotmail contacts which I don't want. However if I only click iCloud, any new contacts I add don't show up

Only contacts added to the iCloud group will sync with iCloud. To make this your default, go to Settings>Mail,Contacts,Calendars...scroll down to the Contacts section and tap Default Account. Here, choose iCloud as your default. After doing so, new contacts will be added to iCloud and sync with your iCloud account.

SCDPM 2010 - Fail to synchronize protection group member

we have a protection group to take backup of dns data on a externally accessible dns server. the protection group simple copies some exported registry keys for the DNS role and also the dns data location which is shown in the below error details of the failed
job.
this protection group is able to run this same exact job on another dns server. I am not sure why this is happening, can someone please help?
Type: Synchronization
Status: Failed
Description: DPM encountered an error while performing an operation for \\?\Volume{1aef1d28-b99b-11e0-89d5-806e6f6e6963}\Windows\System32\dns\xxxxxxxxxxxx.xxx.dns.temp
on DOMINION02.xxxxxxx (ID 2033 Details: The parameter is incorrect (0x80070057))
More information
End time: 29/04/2015 1:18:52 p.m.
Start time: 29/04/2015 1:18:38 p.m.
Time elapsed: 00:00:13
Data transferred: 0 MB
Cluster node -
Source details: C:\
Protection group members: 2
Details
Protection group: DNS

Hi,
What version of DPM + UR are you running. The above are alert details and do not contain the cause of the job failure. What are the details of the failed JOB ? Have you check the application and system event logs on the file server
for errors at the time of the backup failure ? Have you tried rebooting the protected server ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Due times not aligned with Protection Group retention periods

We have a customer running DPM 2012 and using disk and tape backup.
There are 2 protection groups which have retention periods of 1 year and one with 5 year.
In the tape report the following tapes are mentioned:
4 tapes with a due date 1/2/2020
4 tapes with a due date 1/2/2016
And strange : 1 tape with a due date of 2/1/2018. This tape contains the protection for 2 servers using colocation for the so called Low and High group (1 year and 5 year which I mentioned previously).
We can't explain the fact that the due date is on 2018 since we don't have a protection group with that retention parameter.
Can anybody clarify with an example or assist?

Plase put in this tape, make a rightclick and Show the "Tape Content"
you should see which Datasource has which Retention range, maybe this helps.
Seidl Michael | http://www.techguy.at | twitter.com/techguyat |
facebook.com/techguyat |
youtube.com/techguyat

Unable to modify or create Protection Groups in DPM 2012 R2 - Error: 31220

"DPM failed to apply the required policies to this protection group since the recovery point limit for this DPM server has been exceeded. (ID: 31220)"
I am trying to add new data sources to our DPM server and continually run into the above message. I get the same error whether I attempt to create a new Protection Group and add the data sources to it... or if I attempt to modify an existing Protection Group
to add data sources to it. I can guess that the obvious answer is "You have too many data sources or to many recovery points for the server to handle..." If that's the case, I need to figure out how to tell how many I have. As best as I can figure
myself, I have less than 150 data sources and less than 2500 recovery points/snapshot/express-full. If there is a tool or a command that I can run to tell that, I'd be grateful to anyone who can point me in that direction.
I have tried to remove inactive member servers that no longer exist from our Protection Groups... no effect. I have tried to completely delete the removed server's data from replica... no effect. We began seeing this issue in 2012 SP1, so I ran
through the upgrade to 2012 R2 hoping that it would resolve the issue... no effect. I am able to remove members from our Protection Groups, but if I try to add an entirely new member or even just a single DB on an already protected member... fails with
above message. I also tried to adjust the retention and backup schedule... fails with above error.
Other than the stock answer from Microsoft that I am truly exceeding some limit, is there any other underlying issue that can cause this to be mis-reported to me? I hope that SOMEONE has an answer or guidance for me.

Hi,
Another DPM PowerShell script - this one allows you to delete older recovery points for a selected datasource without having to modify the PG.
#Author : Ruud Baars
#Date : 11/09/2008
#Edited : 11/15/2012 By: Wilson S.
#edited : 11/27/2012 By: Mike J.
# NOTE: Update script to only remove recovery points on Disk. Recovery points removed will be from the oldest one up to the date
# entered by the user while the script is running
#deletes all recovery points before 'now' on selected data source.
$version="V4.7"
$ErrorActionPreference = "silentlycontinue"
add-pssnapin sqlservercmdletsnapin100
Add-PSSnapin -Name Microsoft.DataProtectionManager.PowerShell
$MB=1024*1024
$logfile="DPMdeleteRP.LOG"
$wait=10 #seconds
$confirmpreference = "None"
function Show_help
cls
$l="=" * 79
write-host $l -foregroundcolor magenta
write-host -nonewline "`t<<<" -foregroundcolor white
write-host -nonewline " DANGEROUS :: MAY DELETE MANY RECOVERY POINTS " -foregroundcolor red
write-host ">>>" -foregroundcolor white
write-host $l -foregroundcolor magenta
write-host "Version: $version" -foregroundcolor cyan
write-host "A: User Selects data source to remove recovery points for" -foregroundcolor green
write-host "B: User enters date / time (using 24hr clock) to Delete recovery points" -foregroundcolor green
write-host "C: User Confirms deletion after list of recovery points to be deleted is displayed." -foregroundcolor green
write-host "Appending to log file $logfile`n" -foregroundcolor white
write-host "User Accepts all responsibilities by entering a data source or just pressing [Enter] " -foregroundcolor white -backgroundcolor blue
"**********************************" >> $logfile
"Version $version" >> $logfile
get-date >> $logfile
show_help
$DPMservername=&"hostname"
"Selected DPM server = $DPMservername" >> $logfile
write-host "`nConnnecting to DPM server retrieving data source list...`n" -foregroundcolor green
$pglist = @(Get-ProtectionGroup $DPMservername) # WILSON - Created PGlist as array in case we have a single protection group.
$ds=@()
$tapes=$null
$count = 0
$dscount = 0
foreach ($count in 0..($pglist.count - 1))
# write-host $pglist[$count].friendlyname
$ds += @(get-datasource $pglist[$count]) # WILSON - Created DS as array in case we have a single protection group.
# write-host $ds
# write-host $count -foreground yellow
if ( Get-Datasource $DPMservername -inactive) {$ds += Get-Datasource $DPMservername -inactive}
$i=0
write-host "Index Protection Group Computer Path"
write-host "---------------------------------------------------------------------------------"
foreach ($l in $ds)
"[{0,3}] {1,-20} {2,-20} {3}" -f $i, $l.ProtectionGroupName, $l.psinfo.netbiosname, $l.logicalpath
$i++
$DSname=read-host "`nEnter a data source index from list above - Note co-located datasources on same replica will be effected"
if (!$DSname)
write-host "No datasource selected `n" -foregroundcolor yellow
"Aborted on Datasource name" >> $logfile
exit 0
$DSselected=$ds[$DSname]
if (!$DSselected)
write-host "No datasource selected `n" -foregroundcolor yellow
"Aborted on Datasource name" >> $logfile
exit 0
$rp=get-recoverypoint $DS[$dsname]
$rp
# $DoTape=read-host "`nDo you want to remove when recovery points are on tape ? [y/N]"
# "Remove tape recovery point = $DoTape" >> $logfile
write-host "`nCollecting recoverypoint information for datasource $DSselected.name" -foregroundcolor green
if ($DSselected.ShadowCopyUsedspace -gt 0)
while ($DSSelected.TotalRecoveryPoints -eq 0)
{ # "still 0"
#this is on disk
$oldShadowUsage=[math]::round($DSselected.ShadowCopyUsedspace/$MB,1)
$line=("Total recoverypoint usage {0} MB on DISK in {1} recovery points" -f $oldShadowUsage ,$DSselected.TotalRecoveryPoints )
$line >> $logfile
write-host $line`n -foregroundcolor white
#this is on tape
#$trptot=0
#$tp= Get-RecoveryPoint($dsselected) | where {($_.Datalocation -eq "Media")}
#foreach ($trp in $tp) {$trptot += $trp.size }
#if ($trptot -gt 0 )
# $line=("Total recoverypoint usage {0} MB on TAPE in {1} recovery points" -f ($trptot/$MB) ,$DSselected.TotalRecoveryPoints )
# $line >> $logfile
# write-host $line`n -foregroundcolor white
[datetime]$afterdate="1/1/1980"
#$answer=read-host "`nDo you want to delete recovery points from the beginning [Y/n]"
#if ($answer -eq "n" )
# [datetime]$afterdate=read-host "Delete recovery points AFTER date [MM/DD/YYYY hh:mm]"
[datetime]$enddate=read-host "Delete ALL Disk based recovery points BEFORE and Including date/time entered [MM/DD/YYYY hh:mm]"
"Deleting recovery points until $enddate" >>$logfile
write-host "Deleting recovery points until and $enddate" -foregroundcolor yellow
$rp=get-recoverypoint $DSselected
if ($DoTape -ne "y" )
$RPselected=$rp | where {($_.representedpointintime -le $enddate) -and ($_.Isincremental -eq $FALSE) -and ($_.DataLocation -eq "Disk")}
else
$RPselected=$rp | where {($_.representedpointintime -le $enddate) -and ($_.Isincremental -eq $FALSE)}
if (!$RPselected)
write-host "No recovery points found!" -foregroundcolor yellow
"No recovery points found, aborting...!" >> $logfile
exit 0
$reselect = $enddate
$adjustflag = $false
foreach ($onerp in $RPselected)
$rtime=[string]$onerp.representedpointintime
$rsize=[math]::round(($onerp.size/$MB),1)
$line= "Found {0}, RP size= {1} MB (If 0 MB, co-located datasource cannot be computed), Incremental={2} "-f $rtime, $rsize,$onerp.Isincremental
$line >> $logfile
write-host "$line" -foregroundcolor yellow
#Get dependent rp's for data source
$allRPtbd=$DSselected.GetAllRecoveryPointsToBeDeleted($onerp)
foreach ($oneDrp in $allRPtbd)
if ($oneDrp.IsIncremental -eq $FALSE) {continue}
$rtime=[string]$oneDrp.representedpointintime
$rsize=[math]::round(($oneDrp.size/$MB),1)
$line= ("`t...is dependancy for {0} size {1} `tIncremental={2}" -f $rtime, $rsize, $oneDrp.Isincremental)
$line >> $logfile
if ($oneDrp.representedpointintime -ge $enddate)
#stick to latest full ($oneDrp = dependents, $onerp = full)
$adjustflag = $true
$reselect = $onerp.representedpointintime
"<< Dependents newer than BEFORE date >>>" >> $logfile
Write-Host -nonewline "`t <<< later than BEFORE date >>>" -foregroundcolor white -backgroundcolor red
write-host "$line" -foregroundcolor yellow
else
#Ok, include current latest incremental
$reselect = $oneDrp.representedpointintime
write-host "$line" -foregroundcolor yellow
if ($reselect -lt $oneDrp.representedpointintime)
#we adjusted further backward than latest incremental within selection
$reselect = $rtime
$line = "Adjusted BEFORE date to be $reselect to include dependents to $enddate"
$line >> $logfile
Write-Host $line -foregroundcolor white -backgroundcolor blue
$line="`n<<< SECOND TO LAST CHANCE TO ABORT - ONE MORE PROMPT TO CONFIRM. >>>"
write-host $line -foregroundcolor white -backgroundcolor blue
$line >> $logfile
$line="Above recovery points within adjusted range will be permanently deleted !!!"
write-host $line -foregroundcolor red
$line >> $logfile
$line="These RP's include dependent recovery points and may contain co-located datasource(s)"
write-host $line -foregroundcolor red
$line >> $logfile
$line="Data source activity = " + $DSselected.Activity
$line >> $logfile
write-host $line -foregroundcolor white
$DoDelete=""
while (($DoDelete -ne "N" ) -and ($DoDelete -ne "Y"))
$line="Continue with deletion (must answer) Y/N? "
write-host $line -foregroundcolor white
$DoDelete=read-host
$line = $line + $DoDelete
$line >> $logfile
if (!$DSselected.Activity -eq "Idle")
$line="Data source not idle, do you want to wait Y/N ? "
write-host $line -foregroundcolor yellow
$Y=read-host
$line = $line + $Y
$line >> $logfile
if ($Y -ieq "Y")
Write-Host "Waiting for data source to become idle..." -foregroundcolor green
while ($DSselected.Activity -ne "Idle")
("Waiting {0} seconds" -f $wait) >>$logfile
Write-Host -NoNewline "..." -ForegroundColor blue
start-sleep -s $wait
if ($DoDelete -eq "Y")
foreach ($onerp in $RPselected)
#reselect is adjusted to safe range relative to what was requested
#--- if adjustflag not set then all up to including else only older because we must keep the full
if ((($onerp.representedpointintime -le $reselect) -and ($adjustflag -eq $false)) -or ($onerp.representedpointintime -lt $reselect))
$rtime=[string]$onerp.representedpointintime
write-host `n$line -foregroundcolor red
$line >>$logfile
if (($onerp ) -and ($onerp.IsIncremental -eq $FALSE)) { remove-recoverypoint -RecoveryPoint $onerp -confirm:$True} # >> $logfile}
$line =("---`nDeleting recoverypoint -> " + $rtime)
$line >>$logfile
"All Done!" >> $logfile
write-host "`nAll Done!`n`n" -foregroundcolor white
$line="Do you want to View DPMdeleteRP.LOG file Y/N ? "
write-host $line -foregroundcolor white
$Y=read-host
$line = $line + $Y
$line >> $logfile
if ($Y -ieq "Y")
Notepad DPMdeleteRP.LOG
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

Can't create protection groups on the Azure Portal with on-premise hyper-v to Azure

I’m trying to setup Azure Site Recovery on-premise hyper-v to Azure. I have successfully configured the Hyper-V Sites and installed the provider with the registration key. Both servers
show green. I see my hyper-v server on the server tab.
The issue occurred when I’m moving to the next step “creating a Protection Group”. When click on the “create new protection group” I’m getting the error saying "An error
occurred while retrieving the list of servers".
I had this error also yesterday and I tried to delete the sites, vault and create everything again. I used the unregister scripted
https://msdn.microsoft.com/en-us/library/azure/dn903160.aspx?f=255&MSPPError=-2147217396
Still I got the error today again.
I really don’t understand what I’m doing wrong.
Ps. I followed this guide
http://www.ms4u.info/2014/12/configure-azure-site-recovery-asr.html

Your welcome, glade I could help you out. I'm kind of stuck myself with site-to site vpn part. I made the posted here with all the details.
https://social.msdn.microsoft.com/Forums/en-US/4f981cda-52ea-41e9-b9e7-4c34bb7367b8/need-help-to-configure-a-vpn-connection-to-an-azure?forum=WAVirtualMachinesVirtualNetwork
I want to make a planned failover and connect the network with the virtual machines. Somehow the vpn connection fails on phase 2.

Monthly Job for Protection group looks like it didn't run, but tape Recovery point exists.

When I checked the DPM server this morning to confirm that my monthly tape backups had run successfully, I noticed that I didn't see an entry for Tape Backup of the "Mail" protection group. I use a filter that shows all "Tape Backup"
jobs, including all status, and all protection groups, within the past 30 days. I grouped by status and looked under completed & failed jobs, then grouped by PG and looked under the "mail" PG - I see 6 jobs listed in the last month,
some failed and some successful, but the last one is from last weekend... there is nothing for the job which should have run on the evening of 11/1/14.
I went to the Recovery workspace and checked the recovery points available for the mailbox database that this PG covers. When I select 11/1/14 and open the "Recovery Time" dropdown, I clearly see 2 entries at 7:00pm, one for disk, and one
for tape. I selected the tape backup and see "all tapes online". When I click "View tape list", it shows me the tape that contains this backup.
Then I went to the Management workspace and drilled down to view the tapes in the library. I located the tape that is supposed to contain the backup, and confirmed that the "Mail" protection group is listed in the protection groups column.
I also selected "view tape contents", and it shows that the Mail Database is on the tape.
I'd like to assume that since the recovery point does exist, and the tape appears to contain the data from this protection group, that my backup is good. However, the fact that the job doesn't appear in the history at all has me concerned. I'm
considering restoring the data from tape just to confirm that it's actually there, though I'm not sure how I would go about testing the restored data to confirm it's good...
Any thoughts on what might be causing this job to not appear in the logs? (I'm open to suggestions that it's human error, but I did double check my filter, and looked at the job list from a few different angles, so I don't think I simply overlooked
the job in question.) Has anyone else run into this issue?

I thought I'd save my speculation on the issue for a second post, so as not to distract from the actual problem description. I can't help but wonder if it's a coincidence that this weekend was the DST switch... the job would have been scheduled well
before the time change, but it would have been queued up with all the other monthly jobs which start at the same time. Since we have a single drive tape library, it's very possible that this particular job could have been in queue for a few hours before
it actually got to it's turn to use the drive.
Is it possible that the job did run, but during the hour that occurs twice for the fall switch over, and DPM somehow didn't log the job, or overwrote the log, or perhaps just doesn't properly parse logs from that hour, causing it to not show the job in the
logs?

Create Protection Group Hyper-V Virtual Machines Not Listed

Hello,
We are in the process of testing DPM 2012 R2 and we are trying to backup our Hyper-V virtual machines on both cluster hosts and stand-alone Hyper-V hosts. We have deployed the DPM agent to all cluster hosts and the stand-alone hosts, but when we go
to create a protection group, we do not see Hyper-V Virtual Machines listed under "HyperV". We are expecting Virtual Machines to show up as shown in Step 7 of this guide: http://blogs.technet.com/b/kevinholman/archive/2013/11/07/dpm-2012-r2-quickstart-deployment-guide.aspx.
We have DPM 2012 R2 UR4 installed and Hyper-V role is enabled on the DPM server.
Is there something extra we need to do or something we are doing wrong?
Thank you.

Gleb,
Thank you for your help. For our cluster, we realized we weren't seeing any VM's under the Cluster Node because an agent was not installed on our of the Hyper-V hosts in the cluster. As for the stand-alone Hyper-V host and the cluster node listing
within the "Create New Protection Group" wizard, it looks like MOST of the VM's have the "Backup Using Child Partition Snapshot" option, but no longer show as "Online" or "Offline". I believe this is due to the
way the Hyper-V backups are done w/ DPM which was changed either in R2 or one of the Update Rollups.

Moving protection groups to a new server - How do I move tape data?

Hello, I am looking to install a new DPM server and decommission the existing DPM server.
I did read the Technet documentation on
Moving the DPM Server to a different computer
However, it seems easier to load a new DPM server, point protection agents to it and then recreate Protection Groups. Once all of the recovery points on the original server have expired I can proceed in removing it.
The only thing I'm stuck on is how to move all of the Tape data to the new server. And once I do that, how do I associate the recovery points on tape with the newly created Protection Groups?

Hi,
The DPM tapes written to on the old DPM server can be moved to the new DPM server and imported, however, the data on them cannot be restored until you re-catalog the tapes, then the recovery points will show up under the recovery tape under EXTERNAL DPM
TAPES.
However - These recovery points can only be restored as flat files using the "recover to an alternate location" option. The browse will only see protected servers on the new DPM server. So basically, if you don't use the same DPM Server
name and restore the DPMDB, you will not get the option to recovery any data back to original location including application data. This will mean after a flat file restore, you will need to manually move or copy the files back to the applications folder
and replace the existing files for the application to be able to use them.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Ipod on Xbox 360, some songs don't show up

I recently bought an Xbox 360, I have been using my Ipod to listen to music but some songs don't show up in Xbox playlist, particularly the music I have bought and downloaded from Itunes music store, Is it some kind of protected format, what can I do to fix it, any help would be great, thanks

This isn't foolproof but there are usually two things that contribute to songs not appearing under Artist on the iPod, both due to information either in or missing from the Get Info>Info tab against the song in iTunes. 1) the song has no album name associated with it or 2) the song is marked as part of a compilation.
If tracks are missing an Album name (as mentioned above) in the Info tab, this information needs to be filled in. The no album one is a bit quirky as the songs will appear under certain circumstances but the simplest remedy is just add None or Miscellaneous in place of a title. See this link for more detail: I don't see some of my songs when browsing by artist on my iPod
Also if the tracks are ticked in the Get Info>Info tab as part of a compilation, they will not appear under Artist on the iPod. Highlight a song in iTunes that you know is not appearing correctly on your iPod. Right click on it and choose Get Info and click the Info tab (alternatively choose Get Info from the File menu), if "Part of a Compilation" is marked untick it and afterwards update your iPod, you should find it now appears as normal. Compilations are stored in a separate folder in iTunes so the songs don't appear inside the normal Artist>Album folder which may be why this happens.

Forms 11g with Webutil don´t show in browser IE 9

Hi people,
I have a problem with Webutil. I installed th Oracle Forms/Reports 11g in Red Hat 5.5 x86_64, and when is necessary run a pure Forms, it´s works.
Now, when I will try run a Forms with Webutil, don´t show in browser IE 9 - Win 7 64bits - Java Plug-in 1.6.0_25 Using JRE version 1.6.0_25-b04 Java HotSpot(TM) Client.
What can be to show only a gray screen and dont show my Forms ? In java console don´t showed any error, neither in WLS_FORMS.log and forms-diagnost.log.
My files (cfg and env) configuration is below (sorry by excess of information, but I believe the more information better):
=========================================
File                    Located
=========================================
webutil.pll               in $FORMS_PATH
webutil.plx               in $FORMS_PATH
webutil.olb               in $FORMS_PATH
frmwebutil.jar          $ORACLE_HOME/forms/java
frmall.jar               $ORACLE_HOME/forms/java
jacob.jar               $ORACLE_HOME/forms/java
forms_base_ie.js     $ORACLE_HOME/forms/java
forms_ie.js               $ORACLE_HOME/forms/java
jacob.dll               $ORACLE_HOME/forms/webutil/
ffisamp.dll           $ORACLE_HOME/forms/webutil/
d2kwut60.dll          $ORACLE_HOME/forms/webutil/
JNIsharedstubs.dll     $ORACLE_HOME/forms/webutil/
webutil.cfg               $ORACLE_INSTANCE/config/FormsComponent/forms/server/
webutilbase.htm          $ORACLE_INSTANCE/config/FormsComponent/forms/server
webutiljini.htm          $ORACLE_INSTANCE/config/FormsComponent/forms/server
webutiljpi.htm          $ORACLE_INSTANCE/config/FormsComponent/forms/server
=========================================
Java Console Information
=========================================
basic: Starting applet teardown
basic: Finished applet teardown
basic: Starting applet teardown
basic: Finished applet teardown
basic: Added progress listener: sun.plugin.util.GrayBoxPainter$GrayBoxProgressListener@88d319
basic: Plugin2ClassLoader.addURL parent called for http://machine01.br.job.com:8002/forms/java/frmall.jar
basic: Plugin2ClassLoader.addURL parent called for http://machine01.br.job.com:8002/forms/java/frmwebutil.jar
basic: Plugin2ClassLoader.addURL parent called for http://machine01.br.job.com:8002/forms/java/jacob.jar
security: Loading certificates from Deployment session certificate store
security: Loaded certificates from Deployment session certificate store
security: Loading certificates from Internet Explorer TrustedPublisher certificate store
security: Loaded certificates from Internet Explorer TrustedPublisher certificate store
security: Validate the certificate chain using CertPath API
security: Obtain certificate collection in Root CA certificate store
security: Obtain certificate collection in Root CA certificate store
security: Start to check whether root CA is replaced
security: The root CA hasnt been replaced
security: No timestamping info available
security: Found jurisdiction list file
security: No need to checking trusted extension for this certificate
security: The CRL support is disabled
security: The OCSP support is disabled
security: This OCSP End Entity validation is disabled
security: Checking if certificate is in Deployment denied certificate store
security: Checking if certificate is in Deployment permanent certificate store
basic: Applet loaded.
basic: Applet resized and added to parent container
basic: PERF: AppletExecutionRunnable - applet.init() BEGIN ; jvmLaunch dt 270461 us, pluginInit dt 1187686126 us, TotalTime: 1187956587 us
RegisterWebUtil - Loading WebUtil Version 11.1.1.4
basic: Applet initialized
basic: Removed progress listener: sun.plugin.util.GrayBoxPainter$GrayBoxProgressListener@88d319
basic: Applet made visible
basic: Starting applet
basic: completed perf rollup
basic: Applet started
basic: Told clients applet is started
basic: Added progress listener: sun.plugin.util.GrayBoxPainter$GrayBoxProgressListener@1b06a21
basic: Plugin2ClassLoader.addURL parent called for http://machine01.br.job.com:8002/forms/java/frmall.jar
basic: Plugin2ClassLoader.addURL parent called for http://machine01.br.job.com:8002/forms/java/frmall.jar
basic: Plugin2ClassLoader.addURL parent called for http://machine01.br.job.com:8002/forms/java/frmwebutil.jar
basic: Plugin2ClassLoader.addURL parent called for http://machine01.br.job.com:8002/forms/java/jacob.jar
security: Loading certificates from Deployment session certificate store
security: Loaded certificates from Deployment session certificate store
security: Loading certificates from Internet Explorer TrustedPublisher certificate store
security: Loaded certificates from Internet Explorer TrustedPublisher certificate store
security: Validate the certificate chain using CertPath API
security: Obtain certificate collection in Root CA certificate store
security: Obtain certificate collection in Root CA certificate store
security: Start to check whether root CA is replaced
security: The root CA hasnt been replaced
security: No timestamping info available
security: Found jurisdiction list file
security: No need to checking trusted extension for this certificate
security: The CRL support is disabled
security: The OCSP support is disabled
security: This OCSP End Entity validation is disabled
security: Checking if certificate is in Deployment denied certificate store
security: Checking if certificate is in Deployment permanent certificate store
basic: Applet loaded.
basic: Applet resized and added to parent container
basic: PERF: AppletExecutionRunnable - applet.init() BEGIN ; jvmLaunch dt 270461 us, pluginInit dt 1187728773 us, TotalTime: 1187999234 us
basic: Applet initialized
basic: Removed progress listener: sun.plugin.util.GrayBoxPainter$GrayBoxProgressListener@1b06a21
basic: Applet made visible
basic: Starting applet
basic: completed perf rollup
basic: Loaded image: jar:http://machine01.br.job.com:8002/forms/java/frmall.jar!/oracle/forms/icons/splash.gif
basic: Loaded image: jar:http://machine01.br.job.com:8002/forms/java/frmall.jar!/oracle/forms/icons/oracle_logo.gif
basic: Loaded image: jar:http://machine01.br.job.com:8002/forms/java/frmall.jar!/oracle/forms/icons/bgnd.gif
Forms Session ID is formsapp.14
network: Cache entry not found [url: http://machine01.br.job.com:8002/forms/registry/oracle/forms/registry/default.dat, version: null]
network: Connecting http://machine01.br.job.com:8002/forms/registry/oracle/forms/registry/default.dat with proxy=DIRECT
network: Connecting http://machine01.br.job.com:8002/ with proxy=DIRECT
The proxy host is null, and the proxy port is 0.
Native HTTP implementation is being used for the connection.
The connection mode is HTTP.
network: Connecting http://machine01.br.job.com:8002/forms/frmservlet?config=flash&ifsessid=formsapp.14&acceptLanguage=en-US&ifcmd=startsession&iflocale=en-US with proxy=DIRECT
network: Connecting http://machine01.br.job.com:8002/forms/lservlet;jsessionid=1scsTYJcjSTg2LR7JTqXv9gq9bWvRJbLzWt1FTFrk2rcp2qrGNHL!1640610756?ifcmd=getinfo&ifhost=Mxxxx&ifip=10.xx.xx.xxx with proxy=DIRECT
network: Connecting http://machine01.br.job.com:8002/forms/lservlet;jsessionid=1scsTYJcjSTg2LR7JTqXv9gq9bWvRJbLzWt1FTFrk2rcp2qrGNHL!1640610756 with proxy=DIRECT
Forms Applet version is 11.1.1.4
network: Connecting http://machine01.br.job.com:8002/forms/lservlet;jsessionid=1scsTYJcjSTg2LR7JTqXv9gq9bWvRJbLzWt1FTFrk2rcp2qrGNHL!1640610756 with proxy=DIRECT
2011-Aug-26 18:00:31.823 WUI[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2011-Aug-26 18:00:31.832 WUF[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2011-Aug-26 18:00:31.837 WUH[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2011-Aug-26 18:00:31.841 WUS[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2011-Aug-26 18:00:31.849 WUT[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2011-Aug-26 18:00:31.854 WUO[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2011-Aug-26 18:00:31.858 WUL[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2011-Aug-26 18:00:31.864 WUB[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2011-Aug-26 18:00:31.869 WUI[VBeanCommon.destroy()] WebUtil GetClientInfo Utility being removed..
2011-Aug-26 18:00:31.870 WUF[VBeanCommon.destroy()] WebUtil Client Side File Functions being removed..
2011-Aug-26 18:00:31.870 WUH[VBeanCommon.destroy()] WebUtil Client Side Host Commands being removed..
2011-Aug-26 18:00:31.871 WUS[VBeanCommon.destroy()] WebUtil Session Monitoring Facilities being removed..
2011-Aug-26 18:00:31.872 WUT[VBeanCommon.destroy()] WebUtil File Transfer Bean being removed..
2011-Aug-26 18:00:31.872 WUO[VBeanCommon.destroy()] WebUtil Client Side Ole Functions being removed..
2011-Aug-26 18:00:31.872 WUL[VBeanCommon.destroy()] WebUtil C API Functions being removed..
2011-Aug-26 18:00:32.16 WUB[VBeanCommon.destroy()] WebUtil Browser Functions being removed..
network: Connecting http://machine01.br.job.com:8002/forms/lservlet;jsessionid=1scsTYJcjSTg2LR7JTqXv9gq9bWvRJbLzWt1FTFrk2rcp2qrGNHL!1640610756 with proxy=DIRECT
basic: Applet started
basic: Told clients applet is started
Dumping class loader cache...
Live entry: key=http://machine01.br.job.com:8002/forms/java/,frmall.jar,frmwebutil.jar,jacob.jar, refCount=1, threadGroup=sun.plugin2.applet.Applet2ThreadGroup[name=http://machine01.br.job.com:8002/forms/java/-threadGroup,maxpri=4]
Live entry: key=http://machine01.br.job.com:8002/forms/java/,frmall.jar,frmall.jar,frmwebutil.jar,jacob.jar, refCount=1, threadGroup=sun.plugin2.applet.Applet2ThreadGroup[name=http://machine01.br.job.com:8002/forms/java/-threadGroup,maxpri=4]
Done.
! ======== This information above is show when I execute the forms in IE 9 ======== !
! ========Below information about the JRE Plugin ======== !
Dump system properties ...
======== ======== ======== ========
__jvm_launched = 109763333269
acl.read = +
acl.read.default =
acl.write = +
acl.write.default =
awt.toolkit = sun.awt.windows.WToolkit
browser = sun.plugin
browser.vendor = Sun Microsystems, Inc.
browser.version = 1.1
file.encoding = Cp1252
file.encoding.pkg = sun.io
file.separator = \
file.separator.applet = true
http.agent = Mozilla/4.0 (Windows 7 6.1)
http.auth.serializeRequests = true
https.protocols = TLSv1,SSLv3
java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment
java.awt.printerjob = sun.awt.windows.WPrinterJob
java.class.path = C:\\PROGRA~2\\Java\\jre6\\classes
java.class.version = 50.0
java.class.version.applet = true
java.endorsed.dirs = C:\Program Files (x86)\Java\jre6\lib\endorsed
java.ext.dirs = C:\Program Files (x86)\Java\jre6\lib\ext;C:\Windows\Sun\Java\lib\ext
java.home = C:\Program Files (x86)\Java\jre6
java.io.tmpdir = C:\Users\users-dir\AppData\Local\Temp\
java.library.path = C:\Program Files (x86)\Java\jre6\bin;.;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;C:\Program Files (x86)\Internet Explorer;;C:\Program Files (x86)\PC Connectivity Solution\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;c:\Program Files (x86)\Microsoft ASP.NET\ASP.NET Web Pages\v1.0\;C:\Program Files (x86)\QuickTime\QTSystem\;C:\Program Files\Java\jdk1.6.0_27\bin;c:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;
java.protocol.handler.pkgs = sun.plugin.net.protocol|com.sun.deploy.net.protocol
java.rmi.server.RMIClassLoaderSpi = sun.plugin2.applet.JNLP2RMIClassLoaderSpi
java.runtime.name = Java(TM) SE Runtime Environment
java.runtime.version = 1.6.0_25-b04
java.specification.name = Java Platform API Specification
java.specification.vendor = Sun Microsystems Inc.
java.specification.version = 1.6
java.vendor = Sun Microsystems Inc.
java.vendor.applet = true
java.vendor.url = http://java.sun.com/
java.vendor.url.applet = true
java.vendor.url.bug = http://java.sun.com/cgi-bin/bugreport.cgi
java.version = 1.6.0_25
java.version.applet = true
java.vm.info = mixed mode, sharing
java.vm.name = Java HotSpot(TM) Client VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Sun Microsystems Inc.
java.vm.specification.version = 1.0
java.vm.vendor = Sun Microsystems Inc.
java.vm.version = 20.0-b11
javaplugin.nodotversion = 160_25
javaplugin.version = 1.6.0_25
javaplugin.vm.options =
javawebstart.version = javaws-1.6.0_25
line.separator = \r\n
line.separator.applet = true
os.arch = x86
os.arch.applet = true
os.name = Windows 7
os.name.applet = true
os.version = 6.1
os.version.applet = true
package.restrict.access.com.sun.deploy = true
package.restrict.access.netscape = false
package.restrict.access.org.mozilla.jss = true
package.restrict.access.sun = true
package.restrict.definition.com.sun.deploy = true
package.restrict.definition.java = true
package.restrict.definition.netscape = true
package.restrict.definition.org.mozilla.jss = true
package.restrict.definition.sun = true
path.separator = ;
path.separator.applet = true
sun.arch.data.model = 32
sun.awt.warmup = true
sun.boot.class.path = C:\Program Files (x86)\Java\jre6\lib\resources.jar;C:\Program Files (x86)\Java\jre6\lib\rt.jar;C:\Program Files (x86)\Java\jre6\lib\sunrsasign.jar;C:\Program Files (x86)\Java\jre6\lib\jsse.jar;C:\Program Files (x86)\Java\jre6\lib\jce.jar;C:\Program Files (x86)\Java\jre6\lib\charsets.jar;C:\Program Files (x86)\Java\jre6\lib\modules\jdk.boot.jar;C:\Program Files (x86)\Java\jre6\classes;C:\\PROGRA~2\\Java\\jre6\\lib\\deploy.jar;C:\\PROGRA~2\\Java\\jre6\\lib\\javaws.jar;C:\\PROGRA~2\\Java\\jre6\\lib\\plugin.jar
sun.boot.library.path = C:\Program Files (x86)\Java\jre6\bin
sun.cpu.endian = little
sun.cpu.isalist = pentium_pro+mmx pentium_pro pentium+mmx pentium i486 i386 i86
sun.desktop = windows
sun.io.unicode.encoding = UnicodeLittle
sun.java.command = sun.plugin2.main.client.PluginMain write_pipe_name=jpi2_pid2480_pipe4,read_pipe_name=jpi2_pid2480_pipe3
sun.java.launcher = SUN_STANDARD
sun.jnu.encoding = Cp1252
sun.management.compiler = HotSpot Client Compiler
sun.net.client.defaultConnectTimeout = 120000
sun.net.http.errorstream.enableBuffering = true
sun.os.patch.level = Service Pack 1
sun.plugin2.jvm.args = -D__jvm_launched=109763333269 "-Xbootclasspath/a:C:\\\\PROGRA~2\\\\Java\\\\jre6\\\\lib\\\\deploy.jar;C:\\\\PROGRA~2\\\\Java\\\\jre6\\\\lib\\\\javaws.jar;C:\\\\PROGRA~2\\\\Java\\\\jre6\\\\lib\\\\plugin.jar" "-Djava.class.path=C:\\\\PROGRA~2\\\\Java\\\\jre6\\\\classes" -Dsun.awt.warmup=true --- --
trustProxy = true
user.country = US
user.dir = \\machine-desktop\USERS$\users-dir\Desktop
user.home = C:\Users\users-dir
user.language = en
user.name = users-dir
user.timezone = America/Sao_Paulo
user.variant =
================================
Dump deployment properties ...
================================
deployment.browser.path = C:\Program Files (x86)\Internet Explorer\iexplore.exe
deployment.browser.vm.iexplorer = true
deployment.browser.vm.mozilla = true
deployment.cache.enabled = true
deployment.cache.jarcompression = 0
deployment.cache.max.size = -1
deployment.capture.mime.types = true
deployment.console.startup.mode = SHOW
deployment.control.panel.log = false
deployment.javapi.cache.update = false
deployment.javapi.lifecycle.exception = true
deployment.javapi.log.filename =
deployment.javapi.runtime.type = 0
deployment.javapi.stop.timeout = 200
deployment.javapi.trace.filename =
deployment.javaws.associations = ASK_USER
deployment.javaws.autodownload = PROMPT
deployment.javaws.cache.update = false
deployment.javaws.concurrentDownloads = 4
deployment.javaws.home.jnlp.url = http://java.sun.com/products/javawebstart
deployment.javaws.installURL = http://java.sun.com/products/autodl/j2se
deployment.javaws.logFileName =
deployment.javaws.muffin.max = 256
deployment.javaws.shortcut = ASK_IF_HINTED
deployment.javaws.ssv.enabled = true
deployment.javaws.traceFileName =
deployment.javaws.uninstall.shortcut = false
deployment.javaws.update.timeout = 1500
deployment.javaws.viewer.bounds = 280,272,720,360
deployment.jpi.mode.new = true
deployment.log = true
deployment.max.output.file.size = 10
deployment.max.output.files = 5
deployment.mime.types.use.default = true
deployment.proxy.bypass.local = false
deployment.proxy.override.hosts =
deployment.proxy.same = false
deployment.proxy.type = 3
deployment.repository.askdownloaddialog.show = true
deployment.repository.enabled = true
deployment.security.SSLv2Hello = false
deployment.security.SSLv3 = true
deployment.security.TLSv1 = true
deployment.security.askgrantdialog.notinca = true
deployment.security.askgrantdialog.show = true
deployment.security.authenticator = true
deployment.security.blacklist.check = true
deployment.security.browser.keystore.use = true
deployment.security.clientauth.keystore.auto = true
deployment.security.expired.warning = true
deployment.security.https.warning.show = true
deployment.security.jsse.hostmismatch.warning = true
deployment.security.mixcode = ENABLE
deployment.security.notinca.warning = true
deployment.security.password.cache = true
deployment.security.pretrust.list = true
deployment.security.sandbox.awtwarningwindow = true
deployment.security.sandbox.jnlp.enhanced = true
deployment.security.trusted.policy =
deployment.security.validation.crl = false
deployment.security.validation.ocsp = false
deployment.security.validation.ocsp.publisher = false
deployment.system.cachedir = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\SystemCache
deployment.system.security.blacklist = C:\Program Files (x86)\Java\jre6\lib\security\blacklist
deployment.system.security.cacerts = C:\Program Files (x86)\Java\jre6\lib\security\cacerts
deployment.system.security.jssecacerts = C:\Program Files (x86)\Java\jre6\lib\security\jssecacerts
deployment.system.security.oldcacerts = C:\Program Files (x86)\Java\jre6\lib\security\cacerts
deployment.system.security.oldjssecacerts = C:\Program Files (x86)\Java\jre6\lib\security\jssecacerts
deployment.system.security.trusted.certs = C:\Program Files (x86)\Java\jre6\lib\security\trusted.certs
deployment.system.security.trusted.clientauthcerts = C:\Program Files (x86)\Java\jre6\lib\security\trusted.clientcerts
deployment.system.security.trusted.jssecerts = C:\Program Files (x86)\Java\jre6\lib\security\trusted.jssecerts
deployment.system.security.trusted.libraries = C:\Program Files (x86)\Java\jre6\lib\security\trusted.libraries
deployment.system.security.trusted.publishers = C:\Program Files (x86)\Java\jre6\lib\security\trusted.publishers
deployment.system.tray.icon = true
deployment.trace = true
deployment.update.mime.types = true
deployment.user.cachedir = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\cache
deployment.user.extdir = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\ext
deployment.user.logdir = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\log
deployment.user.security.blacklist = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\security\blacklist
deployment.user.security.policy = file://C:/Users/users-dir/AppData/LocalLow/Sun/Java/Deployment/security/java.policy
deployment.user.security.saved.credentials = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\security\auth.dat
deployment.user.security.trusted.cacerts = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\security\trusted.cacerts
deployment.user.security.trusted.certs = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\security\trusted.certs
deployment.user.security.trusted.clientauthcerts = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\security\trusted.clientcerts
deployment.user.security.trusted.jssecacerts = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\security\trusted.jssecacerts
deployment.user.security.trusted.jssecerts = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\security\trusted.jssecerts
deployment.user.security.trusted.libraries = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\security\trusted.libraries
deployment.user.security.trusted.publishers = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\security\trusted.publishers
deployment.user.tmp = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\tmp
deployment.version = 6.0
java.quick.starter = false
================================
# ================================
# formsweb.cfg -
# ================================
[default]
baseHTML=base.htm
baseHTMLjpi=basejpi.htm
HTMLdelimiter=%
envFile=default.env
escapeparams=true
form=test.fmx
userid=
debug=no
host=
port=
digitSubstitution=context
otherparams=obr=%obr% record=%record% tracegroup=%tracegroup% log=%log% term=%term% ssoProxyConnect=%ssoProxyConnect%
obr=no
record=
tracegroup=
log=
term=
pageTitle=Oracle Fusion Middleware Forms Services
HTMLbodyAttrs=
HTMLbeforeForm=
HTMLafterForm=
serverURL=/forms/lservlet
codebase=/forms/java
imageBase=codebase
width=750
height=600
separateFrame=false
splashScreen=
allowAlertClipboard=true
disableValidateClipboard=false
highContrast=false
background=
lookAndFeel=Oracle
colorScheme=teal
logo=
restrictedURLparams=pageTitle,HTMLbodyAttrs,HTMLbeforeForm,HTMLafterForm,log
formsMessageListener=
recordFileName=
serverApp=default
archive=frmall.jar
networkRetries=0
jpi_download_page=http://java.sun.com/products/archive/j2se/6u12/index.html
jpi_classid=clsid:CAFEEFAC-0016-0000-0012-ABCDEFFEDCBA
jpi_codebase=http://java.sun.com/update/1.6.0/jinstall-6-windows-i586.cab#Version=1,6,0,12
jpi_mimetype=application/x-java-applet;jpi-version=1.6.0_12
legacy_lifecycle=false
ssoDynamicResourceCreate=false
ssoErrorUrl=
ssoCancelUrl=
ssoMode=false
ssoProxyConnect=no
allow_debug=false
allowNewConnections=true
EndUserMonitoringEnabled=false
EndUserMonitoringURL=
applet_name=
enableJavascriptEvent=true
JavaScriptBlocksHeartBeat=false
[webutil]
allow_debug=false
debug=false
form=WU_TEST_106.fmx
allowNewConnections=false
userid=webutil/webutil@des_tcp.world
WebUtilArchive=frmwebutil.jar,jacob.jar,frmall.jar
WebUtilLogging=on
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTML=webutilbase.htm
baseHTMLjpi=webutiljpi.htm
archive=
lookAndFeel=oracle
[flash]
HTMLdelimiter=%
envFile=flashwebn.env
escapeparams=true
form=flash/FLASHWEB.fmx
userid=user/password/tns_names
debug=no
host=
port=
digitSubstitution=context
otherparams=obr=%obr% record=%record% tracegroup=%tracegroup% log=%log% term=%term% ssoProxyConnect=%ssoProxyConnect%
obr=no
record=
tracegroup=
log=/tmp/flashweb.log
term=
pageTitle=Oracle Fusion Middleware Forms Services
HTMLbodyAttrs=
HTMLbeforeForm=
HTMLafterForm=
serverURL=/forms/lservlet
codebase=/forms/java
imageBase=codebase
width=750
height=600
separateFrame=false
splashScreen=
allowAlertClipboard=true
disableValidateClipboard=false
highContrast=false
background=
colorScheme=teal
logo=
restrictedURLparams=pageTitle,HTMLbodyAttrs,HTMLbeforeForm,HTMLafterForm,log
formsMessageListener=
recordFileName=
serverApp=default
archive=frmall.jar
networkRetries=0
jpi_download_page=http://java.sun.com/products/archive/j2se/6u12/index.html
jpi_classid=clsid:CAFEEFAC-0016-0000-0012-ABCDEFFEDCBA
jpi_codebase=http://java.sun.com/update/1.6.0/jinstall-6-windows-i586.cab#Version=1,6,0,12
jpi_mimetype=application/x-java-applet;jpi-version=1.6.0_12
legacy_lifecycle=false
ssoDynamicResourceCreate=false
ssoErrorUrl=
ssoCancelUrl=
ssoMode=false
ssoProxyConnect=no
allow_debug=false
allowNewConnections=true
EndUserMonitoringEnabled=false
EndUserMonitoringURL=
applet_name=
enableJavascriptEvent=true
JavaScriptBlocksHeartBeat=false
WebUtilArchive=frmall.jar,frmwebutil.jar,jacob.jar
WebUtilLogging=all
WebUtilLoggingDetail=CONSOLE
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTML=webutilbase.htm
baseHTMLjpi=webutiljpi.htm
lookAndFeel=oracle
# ================================
# webutil.cfg - WebUtil default configuration file
# ================================
logging.file=/tmp/webutil.log
logging.enabled=TRUE
logging.errorsonly=TRUE
logging.connections=TRUE
install.syslib.location=/webutil
install.syslib.0.7.1=jacob.dll|106496|1.10.1|true
install.syslib.0.9.1=JNIsharedstubs.dll|65582|1.0|true
install.syslib.0.9.2=d2kwut60.dll|192512|1.0|true
install.syslib.0.user.1=ffisamp.dll|40960|1.0|true
transfer.database.enabled=TRUE
transfer.appsrv.enabled=TRUE
transfer.appsrv.workAreaRoot=/tmp
transfer.appsrv.accessControl=TRUE
transfer.appsrv.read.1=/tmp
transfer.appsrv.write.1=/tmp
BlockAllowHeartBeat=False
# ================================
# default.env - default Forms environment file, Linux version
# ================================
ORACLE_HOME=/usr/lic/oracle/home/Oracle/Middleware/as
ORACLE_INSTANCE=/usr/lic/oracle/home/Oracle/Middleware/asinst
TNS_ADMIN=/usr/lic/oracle/home/Oracle/Middleware/asinst/config
FORMS_PATH=/usr/lic/oracle/home/Oracle/Middleware/as/forms/flash:/usr/lic/oracle/home/Oracle/Middleware/as/forms:/usr/lic/oracle/home/Oracle/Middleware/asinst/FormsComponent/forms:/usr/lic/oracle/home/Oracle/Middleware/as/forms/flash/tool
WEBUTIL_CONFIG=/usr/lic/oracle/home/Oracle/Middleware/asinst/config/FormsComponent/forms/server/webutil.cfg
FORMS_RESTRICT_ENTER_QUERY=TRUE
CLASSPATH=/usr/lic/oracle/home/Oracle/Middleware/as/forms/java/frmall.jar:/usr/lic/oracle/home/Oracle/Middleware/as/forms/java/frmwebutil.jar:/usr/lic/oracle/home/Oracle/Middleware/as/forms/java/jacob.jar:/usr/lic/oracle/home/Oracle/Middleware/as/forms/j2ee/frmsrv.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/ldapjclnt11.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/debugger.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/ewt3.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/share.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/utj.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/zrclient.jar:/usr/lic/oracle/home/Oracle/Middleware/as/reports/jlib/rwrun.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/start_dejvm.jar:/usr/lic/oracle/home/Oracle/Middleware/as/opmn/lib/optic.jar
PATH=/usr/lic/oracle/home/Oracle/Middleware/as/bin:/usr/lic/oracle/home/Oracle/Middleware/as/jdk/bin
LD_LIBRARY_PATH=/usr/lic/oracle/home/Oracle/Middleware/as/lib:/usr/lic/oracle/home/Oracle/Middleware/as/jdk/jre/lib/amd64:/usr/lic/oracle/home/Oracle/Middleware/as/jdk/jre/lib/amd64/server:/usr/lic/oracle/home/Oracle/Middleware/as/jdk/jre/lib/amd64/native_threads
LD_PRELOAD=/usr/lic/oracle/home/Oracle/Middleware/as/jdk/jre/lib/amd64/libjsig.so
# ================================
# flashwebn.env - default Forms environment file, Linux version
# ================================
ORACLE_HOME=/usr/lic/oracle/home/Oracle/Middleware/as
ORACLE_INSTANCE=/usr/lic/oracle/home/Oracle/Middleware/asinst
TNS_ADMIN=/usr/lic/oracle/home/Oracle/Middleware/asinst/config
FORMS_RESTRICT_ENTER_QUERY=TRUE
FORMS_TIMEOUT=120
FORMS_PATH=/usr/lic/oracle/home/Oracle/Middleware/as/forms/flash:/usr/lic/oracle/home/Oracle/Middleware/as/forms:/usr/lic/oracle/home/Oracle/Middleware/as/forms/flash/tool
REPORTS_PATH=/usr/lic/oracle/home/Oracle/Middleware/as/reports
REPORTS_SERVER=rep_wls_reports_machine01_asinst
PATH_REPORTS_CACHE=/tmp/
PATH_REPORTS_LOCAL=/tmp/
WEBUTIL_CONFIG=/usr/lic/oracle/home/Oracle/Middleware/asinst/config/FormsComponent/forms/server/webutil.cfg
FORMS_RESTRICT_ENTER_QUERY=FALSE
FORMS_USERNAME_CASESENSITIVE=1
CLASSPATH=/usr/lic/oracle/home/Oracle/Middleware/as/forms/java/frmall.jar:/usr/lic/oracle/home/Oracle/Middleware/as/forms/java/frmwebutil.jar:/usr/lic/oracle/home/Oracle/Middleware/as/forms/j2ee/frmsrv.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/ldapjclnt11.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/debugger.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/ewt3.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/share.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/utj.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/zrclient.jar:/usr/lic/oracle/home/Oracle/Middleware/as/reports/jlib/rwrun.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/start_dejvm.jar:/usr/lic/oracle/home/Oracle/Middleware/as/opmn/lib/optic.jar:/usr/lic/oracle/home/Oracle/Middleware/as/forms/java/jacob.jar
#PATH=/usr/lic/oracle/home/Oracle/Middleware/as/forms/flash:/usr/lic/oracle/home/Oracle/Middleware/as/forms:/usr/lic/oracle/home/Oracle/Middleware/asinst/FormsComponent/forms:/usr/lic/oracle/home/Oracle/Middleware/as/forms/flash/tool
LD_PRELOAD=/usr/lic/oracle/home/Oracle/Middleware/as/jdk/jre/lib/amd64/libjsig.so:/usr/lic/oracle/home/Oracle/Middleware/as/jdk/jre/lib/amd64/server/libjvm.so:/usr/lic/oracle/home/Oracle/Middleware/as/jdk/jre/lib/amd64/native_threads/libhpi.so
LD_LIBRARY_PATH=/usr/lic/oracle/home/Oracle/Middleware/as/lib:/usr/lic/oracle/home/Oracle/Middleware/as/jdk/jre/lib/amd64:/usr/lic/oracle/home/Oracle/Middleware/as/jdk/jre/lib/amd64/server:/usr/lic/oracle/home/Oracle/Middleware/as/jdk/jre/lib/amd64/native_threads

If you managed to get to the point where the applet container is created (the "gray square"), but the form never appears then you can assume one or more of the following has occurred:
1. The JRE crashed after startup. Many times, but not always, if such a crash occurs it will leave a JRE dump file on the desktop. Its content may help to identify the cause.
2. The Forms runtime crashed at startup. Many times, but not always, a Forms dump file will be created on the server. Its content may help to identify the cause.
3. The Forms runtime was unable to start at all. This can occur on unix systems when/if there is a resource or permissions issue. One of the more common causes is if the file descriptor (nofiles) value is set too low.
4. The applet is actually running, but has attempted to display a dialog box and is awaiting your acknowledgement, but the box was wrongfully sent to the background behind the browser. A similar issue was reported in one of the JRE 1.6.0_xx series, however I don't recall which one. Uninstall your current version and install the latest which is 1.6.0_27
There are other possibilities, but these are most common.
I would recommend the following:
1. Uninstall any JRE older than 1.6.0_27. Reboot. Install 1.6.0_27
2. Set networkRetries=5 in formsweb.cfg
3. Set FORMS_TIMEOUT to 15 (default). Setting to a high value as you have is not recommended and is rarely necessary.
4. Verify that the test form works. For example:
http://machine:port/forms/frmservlet?form=test
5. It appears that you are trying to use WU_TEST_106.fmx. Instead, download an updated version of this file (the name has also changed)
http://www.oracle.com/ocom/groups/public/@otn/documents/webcontent/196249.zip
6. Ensure that you have compiled webutil.pll into .plx. Do not use an old version of this file. The installation will include one. If not, check for it in an installation that also includes the Builders.

Member on protection group don't show on scheduled

Similar Messages

Maybe you are looking for