Member selection doesn't show lower levels

When you are using member selection, it only shows the top level, no members are shown at all
Any ideas?

What about the Essbase version?
The conflict comes in on the server. The Java API, since about v7.2, has been progressing towards using pure Java calls to the Essbase server. Earlier versions wrapped the C APIs on the server.
Until recently, there was a setting to force the Java API to revert to using the C-APIs. Generally, we adjusted this setting only when the Essbase version and the Java API version were not exactly the same (and sometimes even then if we saw anything that didn't behave as we thought it should.
The setting, olap.service.direct, is not in the 9.3.1 essbase.properties file. Further, the directory containing the C API files is no longer installed as part of the APS installation.
Is APS also 9.3.1? Do you see anything in your APS logs? Note that, by default, APS no longer logs information to standard out (where error messages are sometimes printed). I posted a blog entry just an hour ago that shows how to setup APS to log stdout. It is on my blog at http://timtows-hyperion-blog.blogspot.com/
Tim Tow
Oracle ACE
Applied OLAP, Inc

Similar Messages

CS11_not show low level component

Please find my qn as below,
Ex, BOM
A Header Material
1 ->Child Material 1
2 ->Child Material 2
When I check for my Header material (A) in CS11 I found child material 2 assembly indication is missed out.
Then I found in material master for material (Child Material 2) selection method as 1 (Selection by Explosion date) then I change the selection method as 2 (Selection By production version).Now if I check in CS11 for my header material A I can able to view the assembly indication for Child Material 2.
Please explain to me the logic why we change the BOM selection method, then it will show the low level component in CS11.
Awaiting for your replies.

Dear Kumar,
Pl. refer this link for BOM selection logic.
http://help.sap.com/saphelp_47x200/helpdata/en/f4/7d2b0444af11d182b40000e829fbfe/frameset.htm
Pl. just try this, when the BOM selection method is 1.
CS11 - After entering your details, press vew icon next to execute icon and check the Multi- level in extend view.
It may work for you.
Madhava

Hierarchy selection does NOT show upper level

Hi
I am using BI 7.0 with SP 20 with WAD (No Bex Anl).
I implemented Hierarchy of 0ORGUNIT and when I select a node in the middle
of the Hier the reports starts with the Org from that point and it does
not show the nodes above.
How can I make it show all levels uppword?
Thanks
Edan
Edited by: Edan99 on May 4, 2009 4:05 PM

Hi Edan,
I am facing problem while loading 0ORGUNIT Hirarchies. I saw in forum that you have loaded sucessfully.
Error: InfoObject 0ORGUNIT in BW does not support any hierarchies
when execute infopackage this error is getting.
I am in BI 7.0 environment.
Can you help to load 0ORGUNIT Hirarchies data. because of this no report is display Data.
Regards
Vijay.

Top Level folder doesn't show lowver level pictures - Lightroom2

I have my pictures stored by year and location on a hard drive    example
2009
    Heaven
       April
    Hell
         April
As I remember each upper level would show the counte of sub folders which allowed me to do sorts on ratings and the like
Now only the bottom most folder has the count..
2009                0
    Heaven       0
       April        20
    Hell            0
         April      5
I tried importing everything into a new catalog with np luck.. ONly the bottom most folers seems to have the count
how did I break it??

You have to enable include photos in subitems (I think that was the name) in one of the menus in Library.

Laptop doesn't show battery level.

I have a Satellite M305-S4819 And battery levels arent showing, This is a new battery since the first one is dead. Any suggestions?

Try these suggestions:
Resolving battery and power issues
- Peter

When I open a new tab in Firefox (v. 5) the custom background I have selected doesn't show. Any thoughts? Thanks

When I open Firefox for the first time, the custom background I have displays. But any time I open a new tab while FF is already running the background displays as white- not showing the custom picture I have selected

Just found out that FoxTab 1.4.2b is causing this problem. Solution? Disable it.

I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" it my old username before changing it.

I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" my old username before changing it showed the correct username? please any help would be great.

Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
Inside the snapshot folder is a folder hierarchy like the one on the source disk. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the icon list. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
When you're done, turn TM back ON and close its preference pane.

I am not able to import photos into Lightroom 5.7. When I select a folder, it doesn't show a preview of the images and the import button is greyed out. ??

I am not able to import photos into Lightroom 5.7. When I select a folder, it doesn't show a preview of the images and the import button is greyed out. ??
I have been using Lightroom 5 for 2-3 months now and all worked well, up until today's effort to import a new set of photos. I am working on a Mac with Yosemite 10.10.1.

Go to the bibliothec module, select the folder, right click on the folder and hit synchronize
Sorry I have only a german version , so don't know what your menu will show.

Will not print black. ink cartridge is new. also shows low black level with new cartridge.

HP Photosmart C6180 all-in-one. Will not print Black. Also shows low black ink on ink level. Cartridge is new and HP brand.
In printing colors, very light and has RED hue as there is no black. Also two other cartridges show low ink when all the cartridges have been replaced.

Hi there,
Download and run the print and scan doctor located here (amoung resolving some things automatically it can give us a better idea of what is going on with the printer). Give the steps outlined a shot and let us know the results.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

"Dependecies" tab doesn't show any information for a selected table version 4.0

Hello,
I work with SQL Developer 4.0.0.13. I can see 20 tables in the list. When I select one table, in the tabs on the right side I can see information for "columns" and "data" and "constraints" and "indexes"... but the tab "Dependencies" doesn't show any information about references between this table and other tables in the schema.
Oracle database is v11.2
Can you please tell me what do I need to do in order to see information on "Dependencies" tab for a table?
Thank you,
Milan

Hi, here is my example of XML extension showing referencing tables:
Save the following XML to a file.
<items>
<item type="editor" objectType="TABLE">
    <title><![CDATA[*Referencing Tables]]></title>
      <query>
        <sql><![CDATA[SELECT
cfk.owner "OWNER",
cfk.table_name "TABLE NAME",
cols.column_name "COLUMN",
cfk.constraint_name "CONSTRAINT NAME",
cfk.delete_rule "DELETE RULE",
'SQLDEV:LINK:' || cfk.owner || ':TABLE:' || cfk.table_name ||
':oracle.dbtools.raptor.controls.grid.DefaultDrillLink' "LINK"
FROM
sys.all_constraints cpk,
sys.all_constraints cfk,
sys.all_cons_columns cols
WHERE
cpk.owner = :OBJECT_OWNER AND
cpk.table_name = :OBJECT_NAME AND
SUBSTR(cpk.table_name, 1, 4) != 'BIN$' AND
SUBSTR(cpk.table_name, 1, 3) != 'DR$' AND
cpk.constraint_type in ('P', 'U') AND
cfk.r_owner = cpk.owner AND
cfk.r_constraint_name = cpk.constraint_name AND
cfk.constraint_type = 'R' AND
cols.owner = cfk.owner AND
cols.constraint_name = cfk.constraint_name
ORDER BY
cfk.owner, cfk.table_name, cfk.constraint_name,
cols.column_name]]>
      </sql>
    </query>
</item>
</items>
In SQLDeveloper select Preferences -> Database -> User Defined Extensions and click <Add Row>.
In the "Type" field enter "EDITOR" and in the "Location" field enter the path to the file with XML.
After restarting SQLDeveloper You should see a new tab "*Referencing Tables" for tables.

Lightroom trial doesn't show complete menu selections or import button. Also get error message on launch: An error occurred when attempting to change modules. I am unable to find/see the following file to try renaming the SLCache and SLStore files: Sy

Lightroom trial doesn't show complete menu selections or import button. Also get error message on launch: An error occurred when attempting to change modules. I am unable to find/see the following file to try renaming the SLCache and SLStore files: System Library/Application Support/Adobe. Any ideas? I only have 16 days left on the trial and have been unable to get it to work on my Macbook Pro. This is all I am seeing after Lightroom opens. Thanks!

Thanks to both of you for attempting to help. I finally figured out what was wrong . . . it was a Permissions problem. Very frustrating, but after scouring the troubleshooting tips I finally found the one that solved my problem. I had to add a User and give it Read/Write privileges to Lightroom. The file I had to add the User to was Hidden on my Mac, so that added an even bigger challenge to the mystery. Only a few days left on my trial version! I hope I have time to try it out!

Value doesn't show up after selection in matchcode

I made a few screenshots and put them in links to explain my problem. Thx!
I'm in MR22, the matchcode is not a standard one.
Link: [http://i698.photobucket.com/albums/vv348/su_blimo/screen1.jpg]
I click on F4 for the material
Link: [http://i698.photobucket.com/albums/vv348/su_blimo/screen2.jpg]
I Click on OK
Link: [http://i698.photobucket.com/albums/vv348/su_blimo/screen3.jpg]
I get a list of materials and doubleclick on one
Link:[http://i698.photobucket.com/albums/vv348/su_blimo/screen4.jpg]
The material doesn't show up??!!

Hi,
Make sure that the Export flag against the Material field is selected in the custom search help that you are referring to.
Values can be returned from the hit list to the input template (screen) with an export parameter.
Hope this is helpful.
Regards,
Hemanth

My scanner doesn't show up in the"please select a device list" windows 7 - HP7300 all-in-one

In acrobat X-my scanner doesn't show up in the "please select a device list" how do I get it to see my scanner? - windows 7 - HP 7300 all-in-one

In case anyone else finds this thread I did end up getting mine to work (after abut 48 hours of pulling my hair out). The "solution" was simple in my case, but it might have been a coincidence. I turned the wireless off on my phone for a different reason - then I when I turned it back on the device instantly appeared in spotify-desktop! I had already factory reset my phone, so I know that establishing a connection to the wireless was not the problem in the first place. Also, I was able to play music on my phone, so I know that it was hooked up to the wireless (I turned off 3g just to be sure).
But for some reason when I toggled the wireless off then on again - it worked. Go figure.

When I select a title or lower thirds and try to enter text by double clicking on it I cannot enter any text at all. Also the text area box does not show up at all where you can enter text also.

When I select a title or lower thirds and try to enter text by double clicking on it I cannot enter any text at all. Also the text area box does not show up at all where you can enter text also.

It's a bit hit and miss, Walter. Sometimes the box to enter text shows up straight away in the inspector under "text". Other times, although you click "text" in the inspector, there's nowhere to actually write anything.... then what you have to do is move the trackbar over the Title Box until you see the text boxes in the main Viewer. In the Viewer, double click a text box.... you can enter text there, but it's a bit flaky, but when you've clicked in it, you'll find that under "Text" in the inspector, the box for inputting text has magically appeared!
I'm not sure if anyone else has this trouble, but it is a bit of a pain!

I'm trying to set up time machine to back up on an external HD connected t my airport extreme, but the disk doesn't show as an option in the time machine selecting a disk, any suggestion anyone? My mac "sees" the airport extreme ??

I'm trying to set up time machine to back up on an external HD connected t my airport extreme, but the disk doesn't show as an option in the time machine selecting a disk, any suggestion anyone? My mac "sees" the airport extreme ??

The first important thing to consider here is that Apple does not support Time Machine backups to a drive at the USB port on the AirPort Extreme, so that may likely have something to do with your difficulties.
If you want to continue to try this, the drive must be formatted in Mac OS Extended (Journaled) and you almost always have to use a powered USB hub with a drive at the port of the Extreme...even if the hard drive has its own power supply....because the port on the Extreme is under powered.
Most users who try this unsupported method have corruption difficulties sooner or later, but we do hear from some users who seem to be able to make it work.
The bottom line is that there is no support from Apple on this if you have difficulties, so you may want to consider a secondary backup plan for your important data.

Member selection doesn't show lower levels

Similar Messages

Maybe you are looking for