Members of Domain Local Groups not showing up through net group command

Hello,
I am trying to get the list of members in a Domain Local Group using "NET GROUP" command, but unable to get the member list.
I get the message "group not found", whereas members of Global Groups are visible.
Thank you in advance !

Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription.
This is only one forum among the many that are on the TechNet Discussion Forums, and given your post, you likely chose the wrong forum.
This is a standard response I’ve written up in advance to help many people (thousands, really.) who post their question in this forum in error, but please don’t ignore it.
The links I share below I’ve collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums
are also here: http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the
MSDN discussion forums at http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize!
Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem
you’re seeing.
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have
a forum just for you! It’s called the Where is the forum for…? forum and it’s here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic.
Thanks
MSDN and TechNet Subscriptions Support
Did Microsoft call you out of the blue about your computer?
No, they didn't.

Similar Messages

Alternating colors with drilldown groups not showing in the primary group.

Hi all,
Not sure if it is possible in SSRS but... My alternating colors work in my row groups of the drilldown group, but I also want the primary group (in my screenshot category) to be colored as well. Is this possible at all when my structure is like below?

Hi Yvanlathem,
According to your description, you want to set the textbox background color only for the even rows within child group. Right?
In this scenario, we can put expression into Fill tab in Textbox Properties. We can use IIF() and RowNumber() to make the background color only apply on the even rows. Try the expression below:
=IIF(RowNumber("Parent Group Name") mod 2=0,"Color1","Color2")
We have tested in our local environment. It looks like below:
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Machines not showing up in AD group based collections in CM 2012

Hey Folks
I am facing a wired issue, with collection based on AD group. We have added multiple machines to a AD security group. All these machines are already discovered in CM12. AD group has been added in AD group discovery & we a collection is created based
on this particular AD group. The issue is that there are few machines which are not showing up in AD group collection.I have tried to manually update collection membership, run full discovery : AD system discovery & AD group discovery. When i check that
machines properties in SCCM console the specified AD Group is not showing there. Not sure how do i proceed further.
Thanks in anticipation.
Sumit

We need the your collection query and colleval.log to check the issue. Can you please provide the info here?
Juke Chou
TechNet Community Support

Users added to Profile Manager not showing up in everyone group

So profile manager was working quite well until I made a change to the workgroup group.
I removed the password policy from the workgroup group and added a new group for the password policy so we could essentially still manage non user assigned iOS devices.
Now when I add a new user to the workgroup group on the server I have them login to the mydevices site so we can enroll the device and they can login but are immediately presented with:
"You do not have permission to access the page you were looking for. Contact your system administrator."
In troubleshooting the issue I noticed that new users being added are not showing up the in the everyone group which is preventing the users from having proper access. Prior to all this I could add a user and they would show up in everyone as intended.
Any thoughts?

I'm not sure if this is the same issue, but I have a user in Server.app that is not showing up in Users group. She is listed in her sub-group, but I cannot add devices to her account. When I click on the arrow next to her name in the sub-group, it takes me to the Users list to the top user.
Any thoughts?

Why does Local Folders not show up when I install Thunderbird on certain computers?

I've installed Thunderbird on my computer and it looks normal with "Local Folders" showing up in the left pane. I didn't add an email account, I just installed Thunderbird and an add-on called ImportExport tool and left it with only Local Folders. But when I try to do the same thing and install it on someone else's computer to help them import an .mbox file, when I install Thunderbird on their computer, "Local Folders" is not there. The left pane is just completely blank. And it looks like I can't import an .mbox file without it being there. I tried installing it on another laptop too and the same thing happened with no Local Folders. Why is "Local Folders" not showing up for these other two computers?

I circumvented the problem by copying the c:\users\username\appdata\local\thunderbird folder and the c:\users\username\appdata\roaming\thunderbird folder from my working PC to the nonworking computers, and Local Folders appeared in Thunderbird on those computers. It seems like these files aren't being generated properly on installation.
I tried uninstalling Thunderbird from my working PC and reinstalling it again to see what would happen (after also deleting those two appdata folders so that fresh ones would be created), and this time Local Folders did not appear on my PC as well. I don't think I did anything different during installation either. So I'm not sure why the Local Folders are no longer being generated at installation.

Open Directory groups not showing up in Windows

Hello,
we are using Open Directory on a Leopard 10.2 as a primary PDC for mac, linux and windows clients.
The Kerberos sign in works as expected, but we can not get any group created in the OD to be displayed (or selectable) from windows. All users show up, but no groups.
Anyone got an ides or the same problem?
Message was edited by: majs

Same problem here. On Windows client we see only domain users, no domain groups.
No solution yet.

Effictive Permissions not showing up for security groups after interforest migrations using ADMT

Hi there,
I"m trying to fix an issue with the effective permission, below is the description
Two separate forests exist with respective domains DomainA and DomainB.
A two-way trust has been established between these two domains.
I migrate a user (using ADMT) from DomainA to DomainB.
After migration the user account in DomainB has access to the same shares and folders on file servers in DomainA as it did with the user's account in DomainA.
when i checked the effective permission of the migrated security group it does not show up any tick mark on the permissions. but still end users are able to access the resource on file server
Thanks in advance for any advice you may have to offer.
-Vijay

Hi,
After the user migration, did you finish the Security Translation?
http://social.technet.microsoft.com/wiki/contents/articles/16621.interforest-migration-with-admt-3-2-part-3.aspx#Group_Account_Migration
Regards.
Vivian Wang

IPhone not showing all replies to group messages

In the last month my iPhone 5 has stopped showing all replies to group messages.
For example a friend shall send a group message to another friend and I, I shall either not see this message but see another friends reply in a text message that appears to be between the two of us. Or see the group message as an individual conversation between two people with no replies from other parties.
I am currently running iOS 7.1.1
Can anyone help me?

did you ever fix this issue?? Same thing happening to me as well.

Address Book Groups not showing up in iTunes

The groups that I have set up in Address Book are not showing up in the Info tab in iTunes when attempting to sync my iPhone. The iCal calendars show and sync with no problems. I have tried resetting sync history, logging off of my .Mac account and logging back in.
Any advise? Thanks.

Don't take what I have to say as fact, because I don't use a Mac and could be mistaken. I remember reading last night something about people taking and checking the box on the Summary page of iTunes to replace the info on the iPhone with the computer. Once that was done, it seemed to correct this issue and showed the address groups after that.
It might be worth the experiment, however I would make sure I had a backup of the phone before I tried it. I know it was only the last day or show that I read it, so if you want to search the forum before you try it, be my guest. I don't want to ruin anything for you, but I just remember reading that someone did that and it fixed it.
Hope this helps.

Groups not showing up in contacts?

Hi! My groups are not showing up in my contacts in the Address Book. Any idea why, or how I can make them show up? Thanks.

If all contact info is available online with your MM account - when checking your MM address book via webmail access using a browser, try turning Contacts off for over the air syncing with your MM account on your iPhone. This will erase all contact info on your iPhone. Follow this by turning Contacts back on for all contact info available online with your MM account to be re-downloaded to your iPhone's address book.
When you say you did a complete reset with your iPhone, does this mean you restored your iPhone with Tunes from your iPhone's backup?

Function Moudule not showing under the Function Group in SE80

Hi guys
I transported a couple of newly developed Function Modules to the R3Q ( Quality System) under an exsitng Function Group. the FM are all transported perfectly and the report is also working but in SE80 where u can see a function group and all its related objects i dont see the name of my newly developed FM. Why is that?
I tried transporting my Function Group etc.. but still i am not able to see my new FM's.
When i go to my FM's attributes tab, it shows its under the right function Group. but only in SE80 its not showing up.
Any ideas y ?
Thanks
Moderator message - Please do not use txtspeak in the forum
Edited by: Rob Burbank on Jul 18, 2011 9:52 AM

Hi Adnan;
Are you sure you haven't dont release second or more requests for FG?
If you have more requests, your FG may hasn't be last FM list.
Yo can check below include in SAPLZ<FG> function pool.
INCLUDE LZ<FG>UXX. " Function Modules
Are you seeing last FM list?
Best regards.

Local printer not showing up in RDP session

Is the user RDP using the RDP shortcut saved or creates a new connection everytime? if using the save connection, have you tried deleting it and re-creating it and checking the local resources option again. It should show up a redirected printer in RDP session.

Hi Spicepros,
Situation: I've got a Windows 7 machine using RDP (let's call it Local) connected to a remote Windows 7 machine (Remote) which is hosted on an iMac in Boot Camp. It is a VPN connection. The printer, attached directly to the Local system is an HP LaserJet 400 M401 PCL6 connected via "USB001 Virtual Port". But this printer does not show up on the remote Windows 7 machine.
The RDP connection has Local Resources turned on.
My colleague was able to print to her local printer until she replaced her printer. Now we can't make it work.
Any suggestions would be greatly appreciated!
Warm regards,
Dave
This topic first appeared in the Spiceworks Community

Public logon group not showing up

Hi everybody
I am trying to create a SAPGui entry for logon group access to customer ECC6.0 system.
I have configured the service and sapmsg.ini file.
I was told by customer sysadmin that PUBLIC logon group was created but in the list of logon groups I can only see SPACE.
Moreover, if I complete the procedure with SPACE logon group, when I try to login it won't succeed, warning that even the client number is wrong (?!).
My questions are:
- how to retrieve message server number and port (even though I am fairly certain that they are ok, otherwise the Logon group list wouldn't have been populated... right?)
- what might be the cause for the PUBLIC logon group not to show up
Thanks, points will be awarded
Vincenzo

Hi,
Since you get such strange errors, it almost seems like you are trying to logon to the wrong server.
Please check sapmsg.ini again to see that the correct hostname/ip-address is entered.
Also, did you notice if the server name is correct at the logon screen ?
Every Dialog instance or Central Instance gets logon group SPACE by default. Then, when you create logon groups for the instance,
the group SPACE will disappear.
In some installations the central instance and the message server both uses the instance number of the central instance as a base to calculate the ports.
CentralInstance/DialogInstance = 3200, MsgServer=3600
but, on some installations (E g Windows Cluster) this could be different.
There you might have something like:
CentralInstance/DialogInstance = 3200 and the MsgServer=3601
You need to ask your sysadmin for message server port and host.

SCOM Dynamic Group not Showing Health Watcher

I have the following code which shows a group of servers based on a registry key value. I am trying to add in the health watcher for heartbeat alerts. The computers show up in the group, but not the health watcher. What am I doing wrong?
      <Discovery ID="UINameSpace5f2cab25dac54b879a72830bf59d283a.Group.DiscoveryRule" Enabled="true" Target="UINameSpace5f2cab25dac54b879a72830bf59d283a.Group" ConfirmDelivery="false" Remotable="true"
Priority="Normal">
        <Category>Discovery</Category>
        <DiscoveryTypes>
          <DiscoveryRelationship TypeID="MicrosoftSystemCenterInstanceGroupLibrary7585010!Microsoft.SystemCenter.InstanceGroupContainsEntities" />
        </DiscoveryTypes>
        <DataSource ID="GroupPopulationDataSource" TypeID="SystemCenter!Microsoft.SystemCenter.GroupPopulator">
          <RuleId>$MPElement$</RuleId>
          <GroupInstanceId>$MPElement[Name="UINameSpace5f2cab25dac54b879a72830bf59d283a.Group"]$</GroupInstanceId>
          <MembershipRules>
            <MembershipRule>
              <MonitoringClass>$MPElement[Name="Type80531327bc2f439dba7c289399a2728e"]$</MonitoringClass>
              <RelationshipClass>$MPElement[Name="MicrosoftSystemCenterInstanceGroupLibrary7585010!Microsoft.SystemCenter.InstanceGroupContainsEntities"]$</RelationshipClass>
              <Expression>
                <SimpleExpression>
                  <ValueExpression>
                    <Property>$MPElement[Name="Type80531327bc2f439dba7c289399a2728e"]/AttributeDiscoveryGeneratedByUI9bc587a1ea5f4493a7d745766a57b922$</Property>
                  </ValueExpression>
                  <Operator>Equal</Operator>
                  <ValueExpression>
                    <Value>TEST</Value>
                  </ValueExpression>
                </SimpleExpression>
              </Expression>
            </MembershipRule>
<MembershipRule>
<MonitoringClass>$MPElement[Name="SystemCenter!Microsoft.SystemCenter.HealthServiceWatcher"]$</MonitoringClass>
<RelationshipClass>$MPElement[Name="MicrosoftSystemCenterInstanceGroupLibrary7585010!Microsoft.SystemCenter.InstanceGroupContainsEntities"]$</RelationshipClass>
<Expression>
    <Contains>
      <MonitoringClass>$MPElement[Name="SystemCenter!Microsoft.SystemCenter.HealthService"]$</MonitoringClass>
      <Expression>
        <Contained>
          <MonitoringClass>$MPElement[Name="MicrosoftWindowsLibrary7585010!Microsoft.Windows.Computer"]$</MonitoringClass>
          <Expression>
            <Contained>
              <MonitoringClass>$Target/Id$</MonitoringClass>
            </Contained>
          </Expression>
        </Contained>
      </Expression>
    </Contains>
</Expression>
</MembershipRule>
          </MembershipRules>
        </DataSource>
      </Discovery>
Thanks in advance. I have followed all the threads and I am not able to determine what is incorrect.
Mike Hanlon

Hi Mike,
Your group does not contain Windows Computers:
<MembershipRules>
            <MembershipRule>
              <MonitoringClass>$MPElement[Name="Type80531327bc2f439dba7c289399a2728e"]$</MonitoringClass>
That's why the second expression is always false.
http://OpsMgr.ru/

Local Contacts not showing in Contacts List

Local contacts list only displays two contacts, my own and an emergency contact after sync'ing my Samsung 10.1 tablet with Google.
1.Local Contacts.
When l now open Contacts app, l am constantly presented with 'Setup/ Sync/ Import' contacts.
Yet all my local contacts are still available in the 'Groups' tab.
Through the Groups tab some days ago, l ended up on the full Contacts list, yet am unable to find it again, so the contacts are all there, the problem would seem to be with the App itself?
2. Google Contacts
a) When l attempt to 'Sync' with Google, a repeated 'Sync' error is given. I am assuming this is because there are none and all contacts are saved locally.
b) Why is it not possible to sync Local Contacts with Google and thus have a separate backup.
What l have tried as suggested on 'Setup/ Sync' dialogue:
1. Syncing and reimporting Local Contacts - This has resulted in multiple entries within 'Groups' tab yet not updated main list.
2. Syncing with Google account. - Local contacts are not on Google account and as l said above 'Sync' error
3. Import Contacts - Tried loading SD saved Local Contacts vcf file.
Please advise.
Solved!
Go to Solution.

Whilst there is little I can do regarding the syncing behaviour I may be able to resolve the first issue:
Main Menu > Contacts > Menu Button > Filter > Untick both options under the "Filter" Section > Ensure "All" is ticked in the "Local Contacts" Section under "Display Contacts" > Done.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Members of Domain Local Groups not showing up through net group command

Similar Messages

Maybe you are looking for