Memebers of group not appear to Group Owner at FIM portal

In my distribution groups I have added some member via owner approval and that member appears added to me when i view that group from FIM admin portal but when i look at the same DG from Owner's FIM portal then user does not appear! strange !
Any suggestion pls why is this happening?

Some MPRs are not enabled or they have non-default configuration.
Check if you have the following MPRs enabled:
Distribution list management: Users can read selected attributes of group resources
Distribution list management: Owners can read attributes of group resources
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Similar Messages

Users and Group Owners are unable to see their groups

Hello all,
I have an issue where security group owners are unable see/read any groups that they own. I have enabled the following MPR's but still nothing please help.
Group management: Group administrators can create and delete group resources
Group management: Group administrators can read attributes of group resources
Group management: Group administrators can update group resources
Security group management: Owners can read selected attributes of group resources
Security group management: Owners can update and delete groups they own
Security group management: Users can read selected attributes of group resources
Also when a user logs into the portal they are unable to see any Security groups listed under MY SG Membership. However when we check the group membership they are indeed part of the group both in FIM portal
and AD.

Reason might be that user's don't have access to group objects at all or are not able to read some of attributes of a group. Also make sure that BasicUI keyword was added to the specific elements of UI used in group management - this includes navbars but
also search scopes which are used for group filtering.
On the MPRs side:
Make sure that your Security group users set was not modified - maybe people are filtered out from these MPRs.
Use explore function in MPR part of a portal to check what actual MPRs are being triggered when user tries to access group object.
Tomek Onyszko, memberOf Predica FIM Team (http://www.predica.pl), IdAM knowledge provider @ http://blog.predica.pl
Hi Tomek,
Which attributes must a user be able to read in order for this to work? If possible can you provide me with a full list so I can verify that they do have rights to read them.
I have added the keywork BasicUI to the following sections
Under Home Page Resource
Join a SG
Manage my SGs
Search Scopes
Security Groups (SGs)
See my SG memberships
Under Navigation Bar Resource
My SG Memberships
My SGs
Security Groups (SGs)
As for the security group users set, I have modified it to allow all domain users to be part of this set. When I click View Members all users are listed.
"Use explore function in MPR part of a portal to check what actual MPRs are being triggered when user tries to access group object. " How would somebody go about doing this?

FIM Portal - FIM service could not be contacted. Please contact your administrator.

Hello,
I have an issue with FIM where I can access the fim portal in it's entirety on the fim server itself using my domain admin credentials, but if I try to connect in from another server I can get the FIM homepage, but clicking through various menus I receive
a "service could not be contacted error".
I've setup fim as shown below:
http://technet.microsoft.com/en-us/library/ff512685(v=ws.10).aspx
vm-fim08-01 --- fim service + portal (uses SharePoint foundation 2010)
DNS Alias "fimportal" for vm-fim08-01
SharePoint - 80 application account: service.spportal
FIM service account - service.fim
vm-fim-sync -- fim sync service + sql 2008 R2
vm-fim-sql08 -- contains SQL 2008 R2 DB for fim service
SPNs configured as shown below (setspn -l):
service.fim
FIMService/fimportal
FIMService/fimportal.domaina.local
mssqlsvc/vm-fim-sql-01:1433
service.spportal
HTTP/fimportal.domaina.local
HTTP/fimportal
Delegation setup as shown in the pics on the two service accounts only.
http://fimportal/IdentityManagement/default.aspxfrom the
fim portal server (vm-fim08-01) works OK without a login prompt for full portal access (I don't received the service could not be contacted message). Using the fqdn fimportal.domaina.local from the same server this time asks for a login prompt,
I enter my current Windows credentials, get the home page, but I soon receive "The FIM service could not be contacted".
Using a different server with the fqdn I'm prompted for a login (using the alias logs me in immediately). Either way, whenever I use a different server other than the fim portal server I soon receive "The FIM service could not be contacted".
On the fim portal server's application event logs I see
The Portal cannot connect to the middle tier using the web service interface. This failure prevents all portal scenarios from functioning correctly. The cause may be
due to a missing or invalid server url, a downed server, or an invalid server firewall configuration. Ensure the portal configuration is present and points to the resource management service."
I'm pretty sure this is down to an authentication failure, but changing delegation settings have not helped (I've tried setting my service accounts and computer accounts to delegate for any service, but it didn't help). I've checked my SPNs which
look right to me. Any advice is much appreciated.
Thanks in advance

You did setup an alias for the DNS name. Kerberos delegation needs A records. If you use an Alias you get the type of errors you describe.
Locally this works as the kerberos ticket is available on the local server. If you access the portal from another computer the FIM service has to request a ticket with delegation, that service needs a records as it uses the hostname in the request.

Excise group is not appearing in J1I9

Dear All,
I am not getting the excise group in J1I9 for number range maintenence for J_1IRG23A1.
Same excise group I can see in dropdown meny while posting excise invoice in J1IEX, but in J1I9 it s not appearing in dropdown menu.
What could be the reason.
Regards,
Rakesh

As i said it is SAP bug some time while u create excise group system does not update J_1INEXCGRP table for number range some times it update
so u will have to do this manually in this table is it has not updated
while u move ur settngh to production also u will have to manually check if ur excise group have come to this table if not u will have to maintaine manually
i have done in so many of my imple and roll outs and it has been suggested by SAP also
hope this is clear now

New Contact groups not appearing in iTunes

I just got my iPhone 3G and attempted to set up syncing with iTunes (v7.7).
I added a new group in Address Book, put some contacts in it, and then went to iTunes. I wanted to sync only certain groups from Address Book, so I turned that option on, but the new group I added does not appear in the list. I quit and restarted both Address Book and iTunes. I rebooted the iMac. I reinstalled iTunes. Nothing has worked.
Any ideas?

Indeed, following the instructions from this thread:
http://discussions.apple.com/thread.jspa?threadID=1614078&tstart=60
first led to iTunes finally clearing its cached information, but it still would not adop the new Contacts. They would only appear after following the instructions from the other thread mentioned above:
http://www.ehmac.ca/mac-ipod-help-troubleshooting/64080-itunes-isnt-seeing-addre ss-book-contacts.html#post666662
Thanks for posting these solutions.

IPad Group Contacts are not appearing in itunes

I have a Group Contacts app on my ipad mini that syncs with the contacts on my iPad. I created 4 groups. I want to import those groups into Outlook. I tried opening up icloud, select all, export. Only the 1st contact in that particular group is exported. I then deleted and reinstalled itunes and my groups are not appearing.

Have had same problem and read many different posts on the discussion boards. Came to my own sort of hybrid solution that's posted below:
Backup address book.
Turn off syncing to iPhone within iTunes, and then hit Apply to make sure it takes.
Quit Address Book, iTunes, and basically everything.
Go to Finder > Library > Application Support > Address Book … move all folders out of there EXCEPT the Metadata folder.
Go to Finder > Library > Application Support > Sync Services … move everything out of there.
Reboot computer.
Open address book.
Open iTunes, connect iPhone, and sync.
NOTE: I had to play with these steps, and their order, several times to force iTunes to properly reflect what’s in the address book/contacts, but after about the sixth time it worked.

Excise Group is not appearing in SNUM / J1I9

Hi SD Experts,
I have maintained an Excise Group XX in the basic settings [IMG Logistics General  Tax on goods movement  India]. I wanted to assign a number range for this excise group XX. When I tried to assign a number range for the object J_1IRG23D to the Excise Group XX the error shows u201CExcise Group u2026. XX does not existu201D. Though the Excise group is available in the settings, it is not appearing in the number range. Please help me to solve this problem.
-K.Bharathi-

Dear Bharathi,
Once again you check the excise group in the IMG >Logistics general>Tax on Goods movements>India>Basic settings-->maintain excise groups check which for which plant you maintained.
I hope this will help you,
Regards,
Murali.

Outlook contact groups not appearing in iTunes Sync

I was having trouble getting contact groups to appear in iTunes froma outlook. For awhile I got 1 group to appear and no others. I expermentally deleted that group and it remained while nothing else showed up. Apple support had no idea what to do and I stumbled upon a solution eventually. Since other people seem to have had a similar problem judging from the forums I thought I'd post my fix if nothing else is working for you.
When you create a new group in MSoutlook (by right clicking and selecting new folder) in order to keep your contacts orginized it makes that folder in a subfolder of whichever folder you clicked on. This doesn't display in MSoffice at all, all folders simply appear in a straight line with no way for you to tell where they are. The issue is that if you have these groups in any other directory besides Contacts they will not appear in iTunes. In my case everything was a subfolder under Suggested Contacts. In order to fix/check this simply click on your groups 1 at a time and select the "move folder" option, select Contacts, then hit OK. Rinse and repeat until all your folders are filed under contacts.
Once you've completed that open iTunes, go into the info tab of your device, and sync contacts with outlook. Just select sync all if nothing appears. After the sync all your groups should appear below for you to pick and choose which groups you'd like to upload. I hope this helps.
This fix was using Office 2010 on Windows 7 (64-bit) with iTunes 10.5.2.11

Hi,
I would like to create two folders - one for me and one for my wife. So under 'My Contacts' in Outlook 2010 it looks like this:
Suggested contacts
Contacts
Suggested contacts (email address)
Simon's contacts
Julie's contacts
iTunes has picked up these sub-folders - THANKS!
However, I would like to keep the 'Contacts' folder with all the contacts in and only copy selected contacts from there and place them into my wife's folder and mine. The 'copy' function does not seem to work.
Obviously my contacts are different to my wife's and she does not want hundreds of names on her contact list.
So, basically how do I copy contacts without moving them out of the contacts folder and manually typing them all back in my wife's folder (some contacts we both need)?
Hope you can help on this one.
Many thanks,
Simon

New MAC OSX Address Book Groups Do Not Appear in iTunes for iPhone Sync?

New Groups (and their associated new contacts) created in the MAC OSX Address Book since the initial installation of my iPhone do not appear in iTunes, and hence do not sync with iPhone. I have tried the Advanced - Replace information on this iPhone - Contacts to no avail.

I had this problem for several weeks now!
I followed your procedure and - addresses there, calender gone! Even worse!
So I copied the old SyncServices Folder back into /Library/Application Support/
result as expected, calender there, addresses gone.
My lady called, I was on the phone for 10 minutes or so. Coming back to my iMac I see a Sync-Problem-Icon jumping in the dock. I've been told that one of my addresses has a conflict between adressbook and iPhone. OK. Solve it with adressbook, please.
I open iTunes and everything is there, calender data and adresses!
Finally!
Thank you, Maurizio!
Peter

Contact names not appearing in group text

When sending a group text the contact names do not appear but the phone numbers do, is there a way to change this? Phone is a Z30 STA100-5

I didn't have the problem when returning from International, but I did have the problem right after my new Verizon iphone was set up last week.
After reading some of the posts in the support forum, I first edited my contacts to include the +1 in front of the phone numbers (this may have been an unnecessary step, and it certainly was an annoying one).
Second, I used the *228 set up feature, closed the phone, contacts and text functions on the phone, then turned the phone off and back on, and it seemed to fix the problem for the most part. I think if you search the forum for *228, you will find posts that have the full sequence of steps to follow..
I have other issues with my phone, but at least this one seems cleared up for now.

Help! New contacts in phone do not appear in the Group being sync'd

I have more contacts on my computer than I need on my phone, so I created a group in my address book that I sync to my phone. However, when I create a new contact on my phone it appears in my address book, but does not appear in the group I'm syncing with my phone, just the "All" part of my address book.
Any thoughts on how to get these new contacts to appear in the Group actually being synchronised? Afterall, isn't this really what synchronised means - a two-way sync as opposed to one-way traffic?
Nokia 6280
OS X 10.4.9
iSync 2.4

What you are seeing is "normal", and has been complained about many times on here.
For some unknown reason, if you click your phone in iSync, Apple has provided a "Put events created on phone into [calendar]" pop-up option, but not a "Put contacts created on phone into [group]" pop-up option.
Therefore, it is not possible to tell iSync which group to add new Contacts to, and so it just adds them to the 'All' group.
This has been the case for ever, and has never been changed in any of the iSync updates, and appears it still hasn't been changed in the forthcoming Mac OS X 10.5.
I'm not sure whether it will do any good, but try telling Apple about this on their iSync Feedback page:
http://www.apple.com/feedback/isync.html
Jools

PPOME ,pers no,EE group,EE subgroup,pers area not appear in Basic data tab?

Hi Friends,
                    I am new to SAP HR. I am trying to assign a person for a position in tcode PPOME. After that I could not see Pers No,Name,EE group,EE subgroup,Pers area details are not appear in Basic data tab. But for other persons which are all exist already in system ,I can see pers no,name,EE group,EE subgroup,pers area details. Could you advice what will be the issue?. Thnak you.
Regards,
Hock Teck..

Hi Rajesh / Thomaselsy,
                                    Thanks for your response. Pls see my below output,
             1.    Plogi Orga value is 'X'.
            2.I create person in PA with pers area ,ee group,ee sub group details and i can see all these details in PA0001 table. I did not create pers area, ee group ,ee subgroup for position ids. I wanted to see those pers area,ee group,ee subgroup detail, from pa0001, in PPOME under basic data tab.
           3.Whether I assign position id to a person in PA40 or assign a person in PPOME to a newly created position id,in both cases I can see details are updated in both PA0001 and HRP1001 tables correctly.
          4.I also tried to assing a position id to a person in PA40 and then through PPOME i tried to assign new position id for that same person. Then I can see new position id got replaced in PA40 properly.
          But when I double click on person in PPOME, I could not see pers no,name ,ee group,ee subgroup,pers area under basic data tab..Pls let me know how to proceed further..
Regards,
Hock Teck.

Excise group not appearing in excise no range maintainence session

Hi,
We created a new depot plant and new excise group in golden client.
Transported the same in testing client, excise group is appearing in excise group node.
but in excise number range maintenance session SNRO for object j_1irg23d in testing client, transported excise group is not appearing.
If we enter the same and move for number ranges system states " Excise group XX doesnot exist"
I checked for excise group intable J_1IRG23D table , excise group xx is appearing.
Please help in this regard
Raju.

Hi,
You need to have an entry of the Excise Group in the table - J_1INEXCGRP.
Mostly whenever the excise Group is created this Table is supposed to be updated with the excise Group, but in some cases it does not.
For maintaining the entry in this table you need to open the client settings.
Just maintain the entry of the Excise Group in this table and Save it.
Regards,
Jeetendra Kulkarni
Mumbai
India

Group text messages not appearing in messages

I am receiving all one to one text messages on my iPhone and Macbook, but group strings are not appearing on my macbook pro. Am I missing something? I've deleted existing threads from phone, power cycled, and still no joy.

Hi,
I too have the same annoying issue. I have to continuously take out the battery and restart my Q10 in order for my text messages, facebook, and email notifications to come in. This is my second Q10 now as the first one started freezing when I tried sending emails so I thought the Hub problem was related to a faulty phone but now that I have my second one, the same problems are happening (except for the freezing of the phone). It is incredibly frustrating that a phone in this price range has such a basic fault when the main purpose of a mobile phone is to receive phone calls, text messages, and emails!!
I have also found that I have multiple contact details for the same person and that if I try to call someone's mobile that begins with 04 (Australian mobiles) I get told I can't call that number, but if I call a mobile with +61 (Australian country code) I get through to them! The phone also wont save contact details of people who only have a landlines number.
I have been with Blackberry for 6 years now and this is my 4th BB phone. I have always been a staunch advocate of the Blackberry until now. These software issues should not be happening in a high end phone.
Blackberry, please create a fix for these basic issues as soon as possible.
I have a Blackberry Q10; OS version 10.1.0.1910; Build 517312; and Software Update 10.1.0.314
Many thanks

Tab not appearing in Tab Page Group

I have a Tab Page Group called "CMG_MAIN". Within CMG_MAIN there is a tab called "Hierarchy" (event: CMG_TAB_HIER). When I launch PCUI, this tab does not appear even though every other tab in the Tab Page Group appears. I looked at the Inactive field and no flag is set. I have no idea why it is not appearing. Does anyone have any ideas?
Thank you!

Hi,
Could you please put a breakpoint in the method CHECK_ACTIVE_TABSTRIP and let me know the contents of CT_TABSTRIP? Does it have your event CMG_TAB_HIER till the end of the method, or is it somehow deleted in this method?
Debasish

Memebers of group not appear to Group Owner at FIM portal

Similar Messages

Maybe you are looking for