Memmory allocation

Hello,
I have problem using in my sistem an global variable. Its type is array of clusters and its dimension could increase up to 20000 elements. I don't know from the beginning of the execution the dimension of it, so in the initialisation phase it has no elements. So for each itteraction I add new element.
The problem is that ... increasing a lot, the execution time is also increasing :?( and also I have no idee when memory it is dealocated ...
Have a nice day!

Memory allocation in LabVIEW is done for you automatically. This is great for most cases, but not for yours, since you have a fair amount of data. I would recommend a few things:
Check out the tutorials on LabVIEW Performance and Memory Management and Managing Large Data Sets in LabVIEW. They contain a lot of information on when data is allocated and how to control it. The latter one contains a large data storage implementation you may want to use.
Don't allocate memory at every step. Allocate it in chunks, then consume the chunks. Hitting the memory manager for large amounts of memory is very time intensive. A common allocation method is to double your allocation every time you run out of space. This will make your code more complex, but it will also be a lot faster. When you finish, you can trim your allocation down to the necessary size, if needed.
Stop using the global. Every time you read it, you make a copy of all the data in it. In addition, with the parallel nature of LabVIEW, it is very easy to create a race condition. For example, you read the data at one place in your code, then you read it in another place. The first place then changes the data, followed by the second place changing the data. The changes made by the first place will be lost, overwritten by the changes made by the second place. I have attached a file containing a way to store data in LabVIEW so it is globally available, but also can be locked to prevent this kind of problem.
Good luck. Let us know if you have more problems.
This account is no longer active. Contact ShadesOfGray for current posts and information.
Attachments:
LargeGUIApplicationsInLabVIEW.zip ‏711 KB

Similar Messages

  • Type of memmory allocated to variables.

    what is the type of memmory allocated to primitive data types and for static variables. what is the maximum amount of heap memmory that is allocated for JVM.. for the variables to store..
    When is the memmory OUt of bounds exception thrown

    what is the type of memmory allocated to primitive
    data types and for static variables.
    Static variables, primitive or not, takes space in the heap.
    Local primitives and references take space on the stack.
    what is the
    maximum amount of heap memmory that is allocated for
    JVM.. for the variables to store..
    Depends on which JVM, but probably 64 meg.
    When is the memmory OUt of bounds exception thrownWhen you are out of heap memory. And sometimes in exotic and unusual situations where some other types of memory in the heap are exhausted.

  • 975x PUE issues with memory

    Hi guys,
    I have my old 975x running with no problems with 2GB OCZ since a really long time, everything worked smoothly and i never did any OC of any type in the board.
    But nowdays 2GB is really few to keep the system and games running with no issues so i decided to upgrade to 4GB, i bought 2 Kingston modules (more precisely this ones -> http://www.ec.kingston.com/ecom/configurator_new/PartsInfo_ar.asp?root=latam&LinkBack=http://www.kingston.com/LatAm&ktcpartno=KVR800D2N6/2G,  but i have encountered problems.
    The issue is that when i put the memory the BIOS shows in post 3669952K of memory, witch is roughly 3,5GB, from what i read in several threads about i take that it is a memmory allocation issue that should solve itself once a x64 OS is installed.
    But the problem is that when this 4GB modules are installed the board hangs and i cant even run a install of any OS, basically the BIOS posts, i get the "updating DMI pool data..... sucess" then "press any key to boot from CD" and then just a black screen and nothing happens, when i remove one of the modules everything starts to run fine again.
    Things i tried:
    - Both modules running alone in case one of the modules is broken, both works ok as long as they are alone.
    - Another 2x2GB modules (OCZ), same results
    - yet another 2x2GB modules (8GB total filling up all slots), and shows 7,5GB and it keeps crashing.
    - Every variable in witch i can put 2 modules in the 4 slots.
    - Load bios Fail-Safe config, same results
    - Load bios Optimized setup, sme results.
    I have the 7.1 BIOS version witch from MSI changelog i understand that it should work fine, still, im thinking about upgrading to BIOS 7.9 but i dont know quite how and wanted to ask first if it will solve anything cus i dont want to take the risk if no change would come.
    What could this be?
    Thanks a lot.
    edit:
    Here are some caps of the BIOS information tab
    and another on post.

    Hi jack,
    thanks for the reply, i've tried the clear CMOS but none of the 2 methods apply to this MB so this is what i did:
    1.- Unplugged power cord and waited about a minute
    2.- Press the clear CMOS button SW on the MB, and waited about one minute
    3.- Press the power button to be sure as it says on the guide, and waited about one minute
    4.- Power on the system.
    and this is the other thing i tried.
    1.- Unplugged power cord and waited about a minute
    2.- Removed the battery and waited about a minute
    3.- Press the clear CMOS button SW on the MB and waited about a minute
    4.- Reinserted battery
    5.- Power on
    and then
    1.- Unplugged power cord and waited about a minute
    2.- Removed the battery and waited about a minute
    3.- Reinserted battery
    4.- Press the clear CMOS button SW on the MB and waited about a minute
    5.- Power on
    Same results =(
    I tried with 1 or 2 memory modules and the same thing keeps happening, here's a cap of the screen where it gets stucked.
    What's with the 1024k OK memory testing? it keeps saying that either i put 1GB or 2GB memory.

  • Setting memory quota by process

    hello

    Trying again
    Hello I have been looking for a way to change the memmory allocation within Solaris 10 so that I can quota the memory availiable for a process as at the moment have an application server which requires most of the memory on the box for one separate process but is being held back by a memory quota somewhere, I have been looking at the kernel tuning document but cannot seem to nail it down. Any help would be greatly appreciated as I am new to solaris.
    Thank you

  • How to allocate more memmory for SMS

    Hi I have 6230i, firmware V03.30. I get "memmory almost full" message, when I receive the message. I have 180 SMS in may phone, which I want to keep. How can I allocate more memmory for text messages? Memmory status: Phone =3.1Mb (Gallery =2.9MB, MMS=170.5K) Free memmory= 21.3MB. I have 512MB card, where 300MB is still free. Thank you for advice Krishna

    This is one of the things that always annoyed me about my 6230i... I never found a solution for it either. My In/Out boxes filled up every 2/3 days, so it was seriously annoying...
    That's one of the reasons I went for a smartphone, as the message boxes don't have a set allocated memory - they just share it with everything else... or use the memory card, which is even better.
    Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
    Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

  • How to use property of dimension to filter the 2nd dimension in Allocation?

    Hi experts,
    How do we use a property of one dimension to filter out the members of another dimension in allocation script engine?
    eg of two dimensions
    1.)Entity dimension - (entity dimension)
      memberset:                                        Channeltype (property)
                       Stores
                        Store1                           Boutique
                        Store2                           Kiosk
                        Store3                           Branch
                        Store4                           Concession
                        Store5                           Franchise
                      Nonstore
    2.)business Channel dimension - (user define)
       memberset:
                   Channeltype   
                       Boutique
                       Kiosk
                       Branch
                       Concession
                       Franchise
                       Nochannel
    in allocation code
    *runallocation
    *factor
    *dim entity                          what=Nonstore;                where=bas(Stores)
    *dim businesschannel        what=nochannel;             where= ? ;
    *endallocation
    The thing is that when the engine selected store 2 for entity it should select kiosk as its businesschannel.
    Please advise.
    Thanks as always,
    yajepe

    Hi,
    In this case, I believe, you should have the allocation within a for loop. But you should note that the performance might reduce.
    *FOR %VAR% = BAS(STORES)
       *RUNALLOCATION
       *FACTOR
       *DIM ENTITY WHAT = NONSTORE; WHERE = %VAR%
       *DIM BUSINESSCHANNEL WHAT = NOCHANNEL; WHERE = %VAR%.CHANNELTYPE
       *ENDALLOCATION
    *NEXT
    Hope this helps.

  • A workaround to get open documents in different Spaces to the allocated PS space

    A small workaround for Spaces CS5 Mac.
    If you have CS5 documents spread over different Spaces due to clicking them in the finder and want to get them all back in to the allocated PS Space, here's a workaround.
    You do need one doc open in the correct space I'm afraid for it to work. Create a new doc in there if you have to. I tend to leave one small doc open in the right Space all the time now.
    Go to the allocated PS space. Select the menu option "Consolidate all to tabs" from the  Window>Arrange menu.
    This will bring all the open docs from their spaces to the correct space as tabs.
    That might be enough for you but you can't drag adjustments layers and layers with alphas etc to another doc in Tab view, something I do all the time when I'm retouching 20-30 shots and I'm trying to match them.
    Hard to do that with tab view obviously.
    Next select "Float all in windows" and you'll have your docs viewable, side by side in the right space.
    If you assign a key command to those options, it becomes a quick tap 1-2 and you're done.
    As far as I can tell, if you want floating windows, and all your docs in the right place, and don't want to open your images from the PS open dialogue (who does when you have 6 windows of 50 images on your dual 30" monitor setup?) then this will do it.
    It's not great for all things but it's better than "It's all Apple's fault"

    there is certainly no built in way to do it. In fact Dock Spaces is the only program I've ever heard of that allows you to have different docks in different spaces. if it can't do it, it's impossible.

  • Error in allocating a connection + JPA

    Hello Experts,
    I am trying my first ever JPA Program.I am using netbeans 6.0.In netbeans there is a sample application for WebJPA.In that they are calling entity from servlet.I just made a different project.I have copied all files in my project.At the time of creating persistence unit I have used DB2.But now when I am compiling my project I am getting the following errors.Seems there is some problem with connection to DB2.I have also added the correct jar files during creation of persistence unit.Please help me.Many Thanx in advance.
    *Deploying application in domain failed; Deployment Errorjava.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Failure in loading T2 native library db2jcct2, reason: java.lang.UnsatisfiedLinkError: no db2jcct2 in java.library.path --*
    Internal Exception: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Failure in loading T2 native library db2jcct2, reason: java.lang.UnsatisfiedLinkError: no db2jcct2 in java.library.path
    Error Code: 0
    Deployment error:
    The module has not been deployed.
    See the server log for details.
    at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:163)
    at org.netbeans.modules.j2ee.ant.Deploy.execute(Deploy.java:104)
    at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
    at sun.reflect.GeneratedMethodAccessor1068.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
    at org.apache.tools.ant.Task.perform(Task.java:348)
    at org.apache.tools.ant.Target.execute(Target.java:357)
    at org.apache.tools.ant.Target.performTasks(Target.java:385)
    at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
    at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
    at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
    at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
    at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:277)
    at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:460)
    at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:151)
    Caused by: The module has not been deployed.
    at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:157)

    Hi garava,
    Thanks for the reply.I had followed the same path while creating Persistence Unit.I googled this error & I found a solution where I need to set the NativeLibraryPathPrefix in my JVM.
    For this I went to Servers->Glassfish V2 -> JVM-> .There I set NativeLibraryPathPrefix = D:\Program Files\IBM\SQLLIB\BIN.
    It's working now.But I can't understand what was the problem & how it got solved.
    One more issue ,suppose tom I am facing the same problem for some other XYZ database.Do I need to change this path again for that database.What this path exactly means.I read it looks for "db2jcc2.dll" in this path.What is the need of this dll if I am including jar files during creation of persistence Unit.
    Please help.Thanks in advance.

  • Error in allocating a connection.

    Hi all!
    I have this problem with my sun application server version 8 and its connection to my mysql database. It works like a charm most of the time, but when I go home at night and come back in the morning I get this error message when trying to access the entity bean that has a bean managed conenction to the database :
    java.rmi.RemoteException: ejbFindAllApplications: Error in allocating a connection. Cause: java.lang.RuntimeException: Got exception during XAResource.start:
         com.sun.corba.ee.impl.javax.rmi.CORBA.Util.wrapException(Util.java:597)
         javax.rmi.CORBA.Util.wrapException(Util.java:277)
         Accedo.EntityBeans.OperatorBean._OperatorHome_Stub.findAllOperators(Unknown Source)
         org.apache.jsp.customer_005fsystem.index_005fcustomerservice_jsp._jspService(index_005fcustomerservice_jsp.java:143)
         org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:102)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:282)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:263)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:210)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
         sun.reflect.GeneratedMethodAccessor1297.invoke(Unknown Source)
         sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         java.lang.reflect.Method.invoke(Method.java:324)
         org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:246)
         java.security.AccessController.doPrivileged(Native Method)
         javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
         org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:268)
         org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
    I figure it has do with some idle time-out I have forgotten to set or something, but when I log in to the server administration console I can't figure out what's wrong! Anyone else bumped into this issue that can lend a helping hand?
    Yours sincerely
    /ted

    Hi again,
    seems like I found the cause of the problem; the mysql system variable wait_timeout was set to 28800 (8 hours) which caused the server to stop responding. What I did is simply set it to 604800 (equals a week) and hope that it will work, which I will find out tomorrow morning...

  • Using a variable in an allocation routine in SAP BPC 7.5NW

    Below is a very simple BPC allocation routine I wrote.  The data originally sits on a dummy profit center and needs to be allocated to all itu2019s relevant profit centers. These relevant profit centers can be derived from the profit center hierarchy (BPC_ + ID of entity).
    When I hardcode the Profitcenter and the entity, the routine works (as below). But what I really want is that it works variable as in the line that I commented out. Any idea whether this could work (BPC 7.5NW)  ? If not, I am afraid I need to go to ABAP, which is really a pitty
    //ALLOCATION PROCEDURE CONVERSION RATE
    //=====================================
    *RUNALLOCATION
    *FACTOR=1
    *DIM SEBACCOUNT WHAT=CONV_RATE; WHERE=<<<; USING=<<< ; TOTAL=<<<
    //*DIM PROFCENT WHAT=DUMPC; WHERE=BAS(BPC_"%ENTITY_SET%");USING=<<<; TOTAL=<<<
    *DIM PROFCENT WHAT=DUMPC; WHERE=BAS(BPC_OKB);USING=<<<; TOTAL=<<<
    *DIM ENTITY WHAT=OKB; WHERE=<<<; USING=<<< ; TOTAL=<<<
    *ENDALLOCATION
    Thanks
    Nico

    Gersh,
    It works now. I have implemented the below code (ENTITY needed to contain the variable as well). The relationship profitcenter and entity is very important as it derives the relevant profitcenters from the profit center hierarchy (e.g. all profitcenters under the legalentity node).
    //ALLOCATION PROCEDURE CONVERSION RATE
    //=====================================
    *FOR %ENT% = %ENTITY_SET%
    *RUNALLOCATION
    *FACTOR=1
    *DIM SEBACCOUNT WHAT=CONV_RATE; WHERE=<<<; USING=<<< ; TOTAL=<<<
    *DIM PROFCENT WHAT=DUMPC; WHERE=BAS(BPC_%ENT%);USING=<<<; TOTAL=<<<
    *DIM CATEGORY WHAT=FCSTCUR; WHERE=<<<; USING=<<< ; TOTAL=<<<
    *DIM ENTITY WHAT=%ENT%; WHERE=<<<; USING=<<<; TOTAL=<<<
    *ENDALLOCATION
    *NEXT
    Thanks
    Nico

  • Query is allocating too large memory error in OBIEE 11g

    Hi ,
    We have one pivot table(A) in our dashboard displaying , revenue against a Entity Hierarchy (i.e we have 8 levels under the hierarchy) And we have another pivot table (B) displaying revenue against a customer hierarchy (3 levels under it) .
    Both tables running fine under our OBIEE 11.1.1.6 environment (windows) .
    After deploying the same code (RPD&catalog) in a unix OBIEE 11.1.1.6 server , its throwing the below error ,while populating Pivot table A :
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    *State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 96002] Essbase Error: Internal error: Query is allocating too large memory ( > 4GB) and cannot be executed. Query allocation exceeds allocation limits. (HY000)*
    But , pivot table B is running fine . Help please !!!!!
    data source used : essbase 11.1.2.1
    Thanks
    sayak

    Hi Dpka ,
    Yes ! we are hitting a seperate essbase server with Linux OBIEE enviorement .
    I'll execute the query in essbase and get back to you !!
    Thanks
    sayak

  • Can HPCM calculate percentages to use in allocations as well as perform the allocations

    Hi All
    I have a client that is evaluating which products to purchase from the Oracle stack.  Unfortunately I don't know HPCM yet so I'm not sure of its capabilities.  I think they will definitely go with Hyperion Planning but they do some relatively simple allocations and I cannot decide whether or not they need HPCM.  They currently have a relational / access database that is used to calculate percentages to be used to allocate costs from back office to front office.  Whether they need to purchase HPCM seems to depend upon whether HPCM can calculate the percentages required for the allocation as well as perform the allocations.  The options as I see it are:
    1.  Replace legacy system with HPCM and use HPCM to calculate percentage and apply percentages to allocate costs
    2.  Keep legacy system for calculating percentages, upload percentages to HPCM and use HPCM to allocate costs
    3.  Keep legacy system for calculating percentages, upload percentages to Essbase and use Essbase to allocate costs
    4.  Keep legacy system for calculating percentages and allocating costs (not ideal as will require additional system interfaces of data from and to Hyperion Planning)
    I know HPCM uses Essbase, when I say Essbase above I mean Hyperion Planning.  I have advised the client that they ought to avoid option 4 but I am not clear enough on what HPCM can do to advise them on which of the other options is most suitable / cost effective.
    Any help would be appreciated.
    Regards
    Stu

    Hi Stu,
    the plain answer is Yes, HPCM can do such a simple task. In my private opinion, it would be a bit oversized.
    I want to add an option and put my vote on this:
    0.  Pull in a DB connection the required data into Planning and use Planning to calculate percentage and apply percentages to allocate costs.
    Regards,
    Philip Hulsebosch.
    www.trexco.nl
    p.s. To all users, close questions which were answered. Then we do not have to open them to see if we can help = saves us time to help others.

  • Restrict Product Allocation if Planned order is not getting created

    Hello All,
    We have a scenario that when ever a Sales Order is getting created, Product allocation assignment will be done automatically and planned orders will be created for that requirement in APO.
    There are some cases where in because of wrong Variant Configuration, Planned orders wont be created. Our requirement is to delete the Product Allocation automatically or to stop the product allocation assignment if the planned orders are not created.
    Do we have any standard setting for doing so or Kindly suggest me some BADI's which can be used for it.
    Thanks in advance.
    Best Regards,
    Srinivas.D

    Srinivas,
    A rather odd requirement.
    Have you tried in SCM APO 'Maintain check instructions' to perform the product check first, then allocation?  I would think that if the product check failed, then allocation would not be consulted, and no allocation therefore assigned.
    IMG > APO > GATP > General Settings > Maintain check instructions
    Best Regards,
    DB49

  • MTRR allocation problem on Dell Vostro

    Hello good people,
    I am having MTRR messages from kernel and a warning that graphics performance may suffer. I know from the sparse mtrr documentation around that I can set them up as I want and everything should work  but after trying several changes, the only thing I have managed to do it get a horribly slow laptop.
    I am running 64bit Arch on Dell Vostro 3550. I have 6GB ram and a hybrid video card setup with an Intel card and an ATI one. I am using the proprietary Catalyst driver and I also have the intel driver installed.
    Here we go...
    Kernel message.
    $dmesg | grep -i mtrr
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] MTRR variable ranges enabled:
    [ 17.262434] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
    [ 17.262437] [drm] MTRR allocation failed. Graphics performance may suffer.
    I noticed in /proc/config.gz that I don't have MTRR cleanup enabled by default so I tried adding enable_mtrr_cleanup to the boot line but I still don't get a good mtrr.
    $zgrep MTRR /proc/config.gz
    CONFIG_MTRR=y
    CONFIG_MTRR_SANITIZER=y
    CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
    CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
    Now here is the mtrr I would like to repair. Notice that the memory range in reg 0 is 8192MB. Why? Reg 3 should be the range for the intel card since that's the address I get from lspci -vv as you will see. Similary, reg 4 is mapping for the ATI radeon card. According to what I have read, I want to have these as write-combining. The other ranges I have no idea why they are there which complicates my attempts at fixing the mtrr.
    $cat /proc/mtrr
    reg00: base=0x000000000 ( 0MB), size= 8192MB, count=1: write-back
    reg01: base=0x0cb800000 ( 3256MB), size= 8MB, count=1: uncachable
    reg02: base=0x0cc000000 ( 3264MB), size= 64MB, count=1: uncachable
    reg03: base=0x0d0000000 ( 3328MB), size= 256MB, count=1: uncachable
    reg04: base=0x0e0000000 ( 3584MB), size= 512MB, count=1: uncachable
    reg05: base=0x1afe00000 ( 6910MB), size= 2MB, count=1: uncachable
    reg06: base=0x1b0000000 ( 6912MB), size= 256MB, count=1: uncachable
    reg07: base=0x1c0000000 ( 7168MB), size= 1024MB, count=1: uncachable
    Here is the lspci output.
    $lspci -vv
    00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
    Subsystem: Dell Device 04b3
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: <access denied>
    Kernel driver in use: agpgart-intel
    00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 0000e000-0000efff
    Memory behind bridge: f7b00000-f7bfffff
    Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
    Subsystem: Dell Device 04cd
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 53
    Region 0: Memory at f6400000 (64-bit, non-prefetchable) [size=4M]
    Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
    Region 4: I/O ports at f000 [size=64]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: <access denied>
    Kernel driver in use: i915
    00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
    Subsystem: Dell Device 04b3
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 52
    Region 0: Memory at f7c0a000 (64-bit, non-prefetchable) [size=16]
    Capabilities: <access denied>
    Kernel driver in use: mei
    00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
    Subsystem: Dell Device 04b3
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at f7c08000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: <access denied>
    Kernel driver in use: ehci_hcd
    00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
    Subsystem: Dell Device 04b3
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 54
    Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel
    00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
    I/O behind bridge: 0000d000-0000dfff
    Prefetchable memory behind bridge: 00000000f1100000-00000000f11fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=09, subordinate=0a, sec-latency=0
    Memory behind bridge: f7a00000-f7afffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=0b, subordinate=0c, sec-latency=0
    Memory behind bridge: f7900000-f79fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
    I/O behind bridge: 0000b000-0000cfff
    Memory behind bridge: f6800000-f78fffff
    Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
    Subsystem: Dell Device 04b3
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 23
    Region 0: Memory at f7c07000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: <access denied>
    Kernel driver in use: ehci_hcd
    00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05)
    Subsystem: Dell Device 04b3
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: <access denied>
    00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
    Subsystem: Dell Device 04b3
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 49
    Region 0: I/O ports at f0b0 [size=8]
    Region 1: I/O ports at f0a0 [size=4]
    Region 2: I/O ports at f090 [size=8]
    Region 3: I/O ports at f080 [size=4]
    Region 4: I/O ports at f060 [size=32]
    Region 5: Memory at f7c06000 (32-bit, non-prefetchable) [size=2K]
    Capabilities: <access denied>
    Kernel driver in use: ahci
    00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
    Subsystem: Dell Device 04b3
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin C routed to IRQ 18
    Region 0: Memory at f7c05000 (64-bit, non-prefetchable) [size=256]
    Region 4: I/O ports at f040 [size=32]
    01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] (prog-if 00 [VGA controller])
    Subsystem: Dell Device 04cd
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 55
    Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
    Region 2: Memory at f7b20000 (64-bit, non-prefetchable) [size=128K]
    Region 4: I/O ports at e000 [size=256]
    Expansion ROM at f7b00000 [disabled] [size=128K]
    Capabilities: <access denied>
    Kernel driver in use: fglrx_pci
    05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
    Subsystem: Dell Device 04b3
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 50
    Region 0: I/O ports at d000 [size=256]
    Region 2: Memory at f1104000 (64-bit, prefetchable) [size=4K]
    Region 4: Memory at f1100000 (64-bit, prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: r8169
    09:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 (rev 34)
    Subsystem: Intel Corporation Centrino Wireless-N 1030 BGN
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 51
    Region 0: Memory at f7a00000 (64-bit, non-prefetchable) [size=8K]
    Capabilities: <access denied>
    Kernel driver in use: iwlwifi
    0b:00.0 USB controller: Texas Instruments Device 8241 (rev 02) (prog-if 30 [XHCI])
    Subsystem: Dell Device 04b3
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at f7900000 (64-bit, non-prefetchable) [size=64K]
    Region 2: Memory at f7910000 (64-bit, non-prefetchable) [size=8K]
    Capabilities: <access denied>
    Kernel driver in use: xhci_hcd
    Finally, here is the Xorg log.
    $cat /var/log/Xorg.0.log
    [ 22.722]
    X.Org X Server 1.11.4
    Release Date: 2012-01-27
    [ 22.744] X Protocol Version 11, Revision 0
    [ 22.744] Build Operating System: Linux 3.2.2-1-ARCH x86_64
    [ 22.744] Current Operating System: Linux bitlab 3.3.6-1-ARCH #1 SMP PREEMPT Sun May 13 10:52:32 CEST 2012 x86_64
    [ 22.744] Kernel command line: root=/dev/mapper/arch--volume-lvroot ro
    [ 22.744] Build Date: 29 January 2012 03:38:00PM
    [ 22.744]
    [ 22.744] Current version of pixman: 0.24.4
    [ 22.744] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 22.744] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 22.744] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 19 10:29:00 2012
    [ 22.807] (==) Using config file: "/etc/X11/xorg.conf"
    [ 22.807] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 22.828] (==) ServerLayout "aticonfig Layout"
    [ 22.828] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [ 22.828] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
    [ 22.829] (**) | |-->Device "aticonfig-Device[0]-0"
    [ 22.829] (==) Automatically adding devices
    [ 22.829] (==) Automatically enabling devices
    [ 22.881] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 22.881] Entry deleted from font path.
    [ 22.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 22.882] Entry deleted from font path.
    [ 22.882] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 22.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 22.882] Entry deleted from font path.
    [ 22.882] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 22.882] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 22.882] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 22.882] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 22.882] (II) Loader magic: 0x7ccae0
    [ 22.882] (II) Module ABI versions:
    [ 22.882] X.Org ANSI C Emulation: 0.4
    [ 22.882] X.Org Video Driver: 11.0
    [ 22.882] X.Org XInput driver : 13.0
    [ 22.882] X.Org Server Extension : 6.0
    [ 22.883] (--) PCI:*(0:0:2:0) 8086:0126:1028:04cd rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
    [ 22.883] (--) PCI: (0:1:0:0) 1002:6741:1028:04cd rev 0, Mem @ 0xe0000000/268435456, 0xf7b20000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
    [ 22.883] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 22.883] (II) "extmod" will be loaded by default.
    [ 22.883] (II) "dbe" will be loaded by default.
    [ 22.883] (II) "glx" will be loaded by default.
    [ 22.883] (II) "record" will be loaded by default.
    [ 22.883] (II) "dri" will be loaded by default.
    [ 22.883] (II) "dri2" will be loaded by default.
    [ 22.883] (II) LoadModule: "extmod"
    [ 22.934] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 22.935] (II) Module extmod: vendor="X.Org Foundation"
    [ 22.935] compiled for 1.11.4, module version = 1.0.0
    [ 22.935] Module class: X.Org Server Extension
    [ 22.935] ABI class: X.Org Server Extension, version 6.0
    [ 22.935] (II) Loading extension MIT-SCREEN-SAVER
    [ 22.935] (II) Loading extension XFree86-VidModeExtension
    [ 22.935] (II) Loading extension XFree86-DGA
    [ 22.935] (II) Loading extension DPMS
    [ 22.935] (II) Loading extension XVideo
    [ 22.935] (II) Loading extension XVideo-MotionCompensation
    [ 22.935] (II) Loading extension X-Resource
    [ 22.935] (II) LoadModule: "dbe"
    [ 22.935] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 22.936] (II) Module dbe: vendor="X.Org Foundation"
    [ 22.936] compiled for 1.11.4, module version = 1.0.0
    [ 22.936] Module class: X.Org Server Extension
    [ 22.936] ABI class: X.Org Server Extension, version 6.0
    [ 22.936] (II) Loading extension DOUBLE-BUFFER
    [ 22.936] (II) LoadModule: "glx"
    [ 22.936] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 22.951] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 22.951] compiled for 6.9.0, module version = 1.0.0
    [ 22.952] (II) Loading extension GLX
    [ 22.952] (II) LoadModule: "record"
    [ 22.952] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 22.957] (II) Module record: vendor="X.Org Foundation"
    [ 22.957] compiled for 1.11.4, module version = 1.13.0
    [ 22.957] Module class: X.Org Server Extension
    [ 22.957] ABI class: X.Org Server Extension, version 6.0
    [ 22.957] (II) Loading extension RECORD
    [ 22.957] (II) LoadModule: "dri"
    [ 22.958] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 22.965] (II) Module dri: vendor="X.Org Foundation"
    [ 22.965] compiled for 1.11.4, module version = 1.0.0
    [ 22.965] ABI class: X.Org Server Extension, version 6.0
    [ 22.965] (II) Loading extension XFree86-DRI
    [ 22.965] (II) LoadModule: "dri2"
    [ 22.965] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 22.966] (II) Module dri2: vendor="X.Org Foundation"
    [ 22.966] compiled for 1.11.4, module version = 1.2.0
    [ 22.966] ABI class: X.Org Server Extension, version 6.0
    [ 22.966] (II) Loading extension DRI2
    [ 22.966] (II) LoadModule: "fglrx"
    [ 22.966] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 23.148] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    [ 23.154] compiled for 1.4.99.906, module version = 8.96.4
    [ 23.154] Module class: X.Org Video Driver
    [ 23.156] (II) Loading sub module "fglrxdrm"
    [ 23.156] (II) LoadModule: "fglrxdrm"
    [ 23.156] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 23.183] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    [ 23.183] compiled for 1.4.99.906, module version = 8.96.4
    [ 23.192] (II) ATI Proprietary Linux Driver Version Identifier:8.96.4
    [ 23.192] (II) ATI Proprietary Linux Driver Release Identifier: 8.961
    [ 23.192] (II) ATI Proprietary Linux Driver Build Date: Apr 5 2012 23:06:21
    [ 23.192] (++) using VT number 7
    [ 23.195] (WW) Falling back to old probe method for fglrx
    [ 23.260] (II) Loading PCS database from /etc/ati/amdpcsdb
    [ 23.263] (--) Chipset Supported AMD Graphics Processor (0x6741) found
    [ 23.264] (II) fglrx: intel VGA device detected, load intel driver.
    [ 23.264] (II) LoadModule: "intel"
    [ 23.264] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 23.296] (II) Module intel: vendor="X.Org Foundation"
    [ 23.296] compiled for 1.11.2, module version = 2.17.0
    [ 23.296] Module class: X.Org Video Driver
    [ 23.296] ABI class: X.Org Video Driver, version 11.0
    [ 23.298] ukiDynamicMajor: found major device number 251
    [ 23.298] ukiDynamicMajor: found major device number 251
    [ 23.298] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 23.298] ukiOpenDevice: node name is /dev/ati/card0
    [ 23.298] ukiOpenDevice: open result is 7, (OK)
    [ 23.298] ukiOpenByBusid: ukiOpenMinor returns 7
    [ 23.298] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 23.300] (II) AMD Video driver is running on a device belonging to a group targeted for this release
    [ 23.301] (II) AMD Video driver is signed
    [ 23.301] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 23.301] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 23.301] (II) fglrx(0): pEnt->device->identifier=0x100a450
    [ 23.302] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 23.302] (II) intel(1): pEnt->device->identifier=(nil)
    [ 23.302] (EE) Screen 1 deleted because of no matching config section.
    [ 23.302] (II) UnloadModule: "intel"
    [ 23.302] (II) Unloading intel
    [ 23.302] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
    [ 23.302] (II) fglrx(0): PowerXpress: Discrete GPU is selected.
    [ 23.798] (II) fglrx(0): PowerXpress: Diagnostic output from /usr/lib64/fglrx/switchlibGL:
    Switch to AMD
    [ 23.801] drmOpenDevice: node name is /dev/dri/card0
    [ 23.801] drmOpenDevice: open result is 12, (OK)
    [ 23.801] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 23.801] drmOpenDevice: node name is /dev/dri/card0
    [ 23.801] drmOpenDevice: open result is 12, (OK)
    [ 23.801] drmOpenByBusid: drmOpenMinor returns 12
    [ 23.801] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 23.801] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    [ 23.801] (==) fglrx(0): RGB weight 888
    [ 23.801] (==) fglrx(0): Default visual is TrueColor
    [ 23.802] (**) fglrx(0): Option "Tiling" "off"
    [ 23.802] (**) fglrx(0): Option "LinearFramebuffer" "on"
    [ 23.802] (**) fglrx(0): Option "Shadow" "off"
    [ 23.802] (II) fglrx(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
    [ 23.802] (**) fglrx(0): ChipID override: 0x0126
    [ 23.802] (**) fglrx(0): ChipRev override: 9
    [ 23.802] (**) fglrx(0): Chipset: "Sandybridge Mobile (GT2+)"
    [ 23.802] (**) fglrx(0): Relaxed fencing enabled
    [ 23.802] (**) fglrx(0): Wait on SwapBuffers? enabled
    [ 23.802] (**) fglrx(0): Triple buffering? enabled
    [ 23.802] (**) fglrx(0): Framebuffer linear
    [ 23.802] (**) fglrx(0): Pixmaps linear
    [ 23.802] (**) fglrx(0): 3D buffers tiled
    [ 23.802] (**) fglrx(0): SwapBuffers wait enabled
    [ 23.802] (==) fglrx(0): video overlay key set to 0x101fe
    [ 23.802] (II) fglrx(0): Output LVDS1 using monitor section aticonfig-Monitor[0]-0
    [ 23.802] (II) fglrx(0): found backlight control interface /sys/class/backlight/acpi_video1
    [ 23.802] (II) fglrx(0): Output VGA1 has no monitor section
    [ 23.825] (II) fglrx(0): Output HDMI1 has no monitor section
    [ 23.863] (II) fglrx(0): Output DP1 has no monitor section
    [ 23.863] (II) fglrx(0): EDID for output LVDS1
    [ 23.863] (II) fglrx(0): Manufacturer: LGD Model: 2e3 Serial#: 0
    [ 23.863] (II) fglrx(0): Year: 2010 Week: 0
    [ 23.863] (II) fglrx(0): EDID Version: 1.4
    [ 23.863] (II) fglrx(0): Digital Display Input
    [ 23.863] (II) fglrx(0): 6 bits per channel
    [ 23.863] (II) fglrx(0): Digital interface is undefined
    [ 23.863] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
    [ 23.863] (II) fglrx(0): Gamma: 2.20
    [ 23.863] (II) fglrx(0): No DPMS capabilities specified
    [ 23.863] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 23.863] (II) fglrx(0): First detailed timing is preferred mode
    [ 23.863] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
    [ 23.863] (II) fglrx(0): redX: 0.613 redY: 0.371 greenX: 0.350 greenY: 0.606
    [ 23.863] (II) fglrx(0): blueX: 0.152 blueY: 0.099 whiteX: 0.313 whiteY: 0.329
    [ 23.863] (II) fglrx(0): Manufacturer's mask: 0
    [ 23.863] (II) fglrx(0): Supported detailed timing:
    [ 23.863] (II) fglrx(0): clock: 76.0 MHz Image Size: 344 x 194 mm
    [ 23.863] (II) fglrx(0): h_active: 1366 h_sync: 1402 h_sync_end 1450 h_blank_end 1564 h_border: 0
    [ 23.863] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 810 v_border: 0
    [ 23.863] (II) fglrx(0): Supported detailed timing:
    [ 23.863] (II) fglrx(0): clock: 51.0 MHz Image Size: 344 x 194 mm
    [ 23.863] (II) fglrx(0): h_active: 1366 h_sync: 1402 h_sync_end 1450 h_blank_end 1564 h_border: 0
    [ 23.863] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 814 v_border: 0
    [ 23.863] (II) fglrx(0): PPCTF156WH4
    [ 23.863] (II) fglrx(0): Unknown vendor-specific block 0
    [ 23.863] (II) fglrx(0): EDID (in hex):
    [ 23.863] (II) fglrx(0): 00ffffffffffff0030e4e30200000000
    [ 23.863] (II) fglrx(0): 00140104902213780a09159d5f599b27
    [ 23.863] (II) fglrx(0): 19505400000001010101010101010101
    [ 23.863] (II) fglrx(0): 010101010101b01d56c650002a302430
    [ 23.863] (II) fglrx(0): 350058c210000019ec1356c650002e30
    [ 23.863] (II) fglrx(0): 2430350058c210000019000000fe0050
    [ 23.863] (II) fglrx(0): 50435446803135365748340a00000000
    [ 23.863] (II) fglrx(0): 00004131960000000001010a202000ef
    [ 23.863] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 23.863] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 23.863] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 23.863] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 23.863] (II) fglrx(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 23.863] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 23.863] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 23.863] (II) fglrx(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 23.863] (II) fglrx(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 23.863] (II) fglrx(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 23.863] (II) fglrx(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 23.863] (II) fglrx(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 23.863] (II) fglrx(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 23.863] (II) fglrx(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 23.863] (II) fglrx(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 23.863] (II) fglrx(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 23.863] (II) fglrx(0): Printing probed modes for output LVDS1
    [ 23.863] (II) fglrx(0): Modeline "1366x768"x60.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 23.863] (II) fglrx(0): Modeline "1366x768"x40.1 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 23.863] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 23.863] (II) fglrx(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 23.863] (II) fglrx(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 23.863] (II) fglrx(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 23.863] (II) fglrx(0): EDID for output VGA1
    [ 23.887] (II) fglrx(0): EDID for output HDMI1
    [ 23.926] (II) fglrx(0): EDID for output DP1
    [ 23.973] (II) fglrx(0): Output LVDS1 connected
    [ 23.973] (II) fglrx(0): Output VGA1 disconnected
    [ 23.973] (II) fglrx(0): Output HDMI1 disconnected
    [ 23.973] (II) fglrx(0): Output DP1 disconnected
    [ 23.973] (II) fglrx(0): Using exact sizes for initial modes
    [ 23.973] (II) fglrx(0): Output LVDS1 using initial mode 1366x768
    [ 23.973] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 23.973] (II) fglrx(0): Kernel page flipping support detected, enabling
    [ 23.973] (**) fglrx(0): Display dimensions: (340, 190) mm
    [ 23.973] (**) fglrx(0): DPI set to (102, 102)
    [ 23.973] (II) Loading sub module "fb"
    [ 23.973] (II) LoadModule: "fb"
    [ 23.984] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 24.133] (II) Module fb: vendor="X.Org Foundation"
    [ 24.133] compiled for 1.11.4, module version = 1.0.0
    [ 24.133] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 24.133] (II) Loading sub module "dri2"
    [ 24.133] (II) LoadModule: "dri2"
    [ 24.133] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 24.133] (II) Module dri2: vendor="X.Org Foundation"
    [ 24.133] compiled for 1.11.4, module version = 1.2.0
    [ 24.133] ABI class: X.Org Server Extension, version 6.0
    [ 24.133] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    [ 24.133] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 24.133] (==) fglrx(0): Default visual is TrueColor
    [ 24.133] (**) fglrx(0): Option "DPMS" "true"
    [ 24.133] (==) fglrx(0): RGB weight 888
    [ 24.133] (II) fglrx(0): Using 8 bits per RGB
    [ 24.133] (==) fglrx(0): Buffer Tiling is ON
    [ 24.133] (II) Loading sub module "fglrxdrm"
    [ 24.133] (II) LoadModule: "fglrxdrm"
    [ 24.133] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 24.133] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    [ 24.133] compiled for 1.4.99.906, module version = 8.96.4
    [ 24.134] ukiDynamicMajor: found major device number 251
    [ 24.134] ukiDynamicMajor: found major device number 251
    [ 24.134] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 24.134] ukiOpenDevice: node name is /dev/ati/card0
    [ 24.134] ukiOpenDevice: open result is 13, (OK)
    [ 24.134] ukiOpenByBusid: ukiOpenMinor returns 13
    [ 24.134] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 24.135] (**) fglrx(0): NoAccel = NO
    [ 24.135] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
    [ 24.135] (--) fglrx(0): Chipset: "AMD Radeon 6600M and 6700M Series" (Chipset = 0x6741)
    [ 24.135] (--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x04cd)
    [ 24.135] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
    [ 24.135] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
    [ 24.135] (--) fglrx(0): MMIO registers at 0xf7b20000
    [ 24.135] (--) fglrx(0): I/O port at 0x0000e000
    [ 24.135] (==) fglrx(0): ROM-BIOS at 0x000c0000
    [ 24.157] (II) fglrx(0): AC Adapter is used
    [ 24.236] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
    [ 24.236] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
    [ 24.236] (II) fglrx(0): PCIE card detected
    [ 24.236] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
    [ 24.236] (WW) fglrx(0): board is an unknown third party board, chipset is supported
    [ 24.241] (II) fglrx(0): Using adapter: 1:0.0.
    [ 24.248] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
    [ 24.274] (II) fglrx(0): Interrupt handler installed at IRQ 55.
    [ 24.274] (II) fglrx(0): RandR 1.2 support is enabled!
    [ 24.274] (II) fglrx(0): RandR 1.2 rotation support is enabled!
    [ 24.274] (==) fglrx(0): Center Mode is disabled
    [ 24.274] (II) Loading sub module "fb"
    [ 24.274] (II) LoadModule: "fb"
    [ 24.274] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 24.274] (II) Module fb: vendor="X.Org Foundation"
    [ 24.274] compiled for 1.11.4, module version = 1.0.0
    [ 24.274] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 24.274] (II) Loading sub module "ddc"
    [ 24.274] (II) LoadModule: "ddc"
    [ 24.274] (II) Module "ddc" already built-in
    [ 24.388] (II) fglrx(0): Finished Initialize PPLIB!
    [ 24.396] (II) fglrx(0): Eyefinity capable adapter detected.
    [ 24.397] (II) fglrx(0): Adapter AMD Radeon 6600M and 6700M Series has 6 configurable heads and 0 displays connected.
    [ 24.397] (==) fglrx(0): PseudoColor visuals disabled
    [ 24.397] (II) Loading sub module "ramdac"
    [ 24.397] (II) LoadModule: "ramdac"
    [ 24.397] (II) Module "ramdac" already built-in
    [ 24.397] (==) fglrx(0): NoDRI = NO
    [ 24.397] (==) fglrx(0): Capabilities: 0x00000000
    [ 24.397] (==) fglrx(0): CapabilitiesEx: 0x00000000
    [ 24.397] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    [ 24.397] (==) fglrx(0): UseFastTLS=0
    [ 24.397] (--) Depth 24 pixmap format is 32 bpp
    [ 24.397] (II) LoadModule: "glesx"
    [ 24.458] (II) Loading /usr/lib/xorg/modules/glesx.so
    [ 24.594] (II) Module glesx: vendor="X.Org Foundation"
    [ 24.594] compiled for 1.4.99.906, module version = 1.0.0
    [ 24.594] (II) Loading extension GLESX
    [ 24.606] (II) fglrx(0): [DRI2] Setup complete
    [ 24.606] (II) fglrx(0): [DRI2] DRI driver: i965
    [ 24.606] (II) fglrx(0): Allocated new frame buffer 1408x768 stride 5632, untiled
    [ 24.610] (II) UXA(0): Driver registered support for the following operations:
    [ 24.610] (II) solid
    [ 24.610] (II) copy
    [ 24.610] (II) composite (RENDER acceleration)
    [ 24.610] (II) put_image
    [ 24.610] (II) get_image
    [ 24.610] (==) fglrx(0): Backing store disabled
    [ 24.610] (==) fglrx(0): Silken mouse enabled
    [ 24.610] (II) fglrx(0): Initializing HW Cursor
    [ 24.666] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 24.667] (**) fglrx(0): DPMS enabled
    [ 24.667] (==) fglrx(0): Intel XvMC decoder enabled
    [ 24.667] (II) fglrx(0): Set up textured video
    [ 24.667] (II) fglrx(0): [XvMC] xvmc_vld driver initialized.
    [ 24.667] (II) fglrx(0): direct rendering: DRI2 Enabled
    [ 24.667] (WW) fglrx(0): Option "VendorName" is not used
    [ 24.667] (WW) fglrx(0): Option "ModelName" is not used
    [ 24.667] (WW) fglrx(0): Option "Shadow" is not used
    [ 24.667] (WW) fglrx(0): Option "Tiling" is not used
    [ 24.667] (WW) fglrx(0): Option "LinearFramebuffer" is not used
    [ 24.667] (==) fglrx(0): hotplug detection: "enabled"
    [ 24.668] (II) Loading extension ATIFGLRXDRI
    [ 24.668] (II) fglrx(0): doing swlDriScreenInit
    [ 24.668] (II) fglrx(0): swlDriScreenInit for fglrx driver
    [ 24.668] ukiDynamicMajor: found major device number 251
    [ 24.668] ukiDynamicMajor: found major device number 251
    [ 24.668] ukiDynamicMajor: found major device number 251
    [ 24.668] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 24.668] ukiOpenDevice: node name is /dev/ati/card0
    [ 24.668] ukiOpenDevice: open result is 15, (OK)
    [ 24.668] ukiOpenByBusid: ukiOpenMinor returns 15
    [ 24.668] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 24.668] (II) fglrx(0): [uki] DRM interface version 1.0
    [ 24.668] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
    [ 24.668] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
    [ 24.668] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f9e27b95000
    [ 24.668] (II) fglrx(0): [uki] framebuffer handle = 0x3000
    [ 24.668] (II) fglrx(0): [uki] added 1 reserved context for kernel
    [ 24.668] (II) fglrx(0): swlDriScreenInit done
    [ 24.668] (II) fglrx(0): Kernel Module Version Information:
    [ 24.668] (II) fglrx(0): Name: fglrx
    [ 24.668] (II) fglrx(0): Version: 8.96.4
    [ 24.668] (II) fglrx(0): Date: Apr 5 2012
    [ 24.668] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
    [ 24.668] (II) fglrx(0): Kernel Module version matches driver.
    [ 24.668] (II) fglrx(0): Kernel Module Build Time Information:
    [ 24.668] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.3.6-1-ARCH
    [ 24.668] (II) fglrx(0): Build-Kernel MODVERSIONS: no
    [ 24.668] (II) fglrx(0): Build-Kernel __SMP__: no
    [ 24.668] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
    [ 24.668] (II) fglrx(0): [uki] register handle = 0x00004000
    [ 24.699] (II) fglrx(0): DRI initialization successfull
    [ 24.699] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01028000
    [ 24.699] (II) fglrx(0): Intel display surface mc addr for AMD: 8fce0000
    [ 24.700] (==) fglrx(0): Backing store disabled
    [ 24.700] (II) Loading extension FGLRXEXTENSION
    [ 24.700] (**) fglrx(0): DPMS enabled
    [ 24.700] (II) fglrx(0): Initialized in-driver Xinerama extension
    [ 24.700] (**) fglrx(0): Textured Video is enabled.
    [ 24.700] (II) fglrx(0): GLESX enableFlags = 848
    [ 24.700] (II) fglrx(0): GLESX is enabled
    [ 24.700] (II) LoadModule: "amdxmm"
    [ 24.701] (II) Loading /usr/lib/xorg/modules/amdxmm.so
    [ 24.709] (II) Module amdxmm: vendor="X.Org Foundation"
    [ 24.709] compiled for 1.4.99.906, module version = 2.0.0
    [ 24.709] (II) Loading extension AMDXVOPL
    [ 24.709] (II) Loading extension AMDXVBA
    [ 24.709] XvScreenInit: screen devPrivates ptr non-NULL before init
    [ 24.721] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
    [ 24.723] (II) fglrx(0): Enable composite support successfully
    [ 24.723] (WW) fglrx(0): Option "VendorName" is not used
    [ 24.723] (WW) fglrx(0): Option "ModelName" is not used
    [ 24.723] (WW) fglrx(0): Option "Shadow" is not used
    [ 24.723] (WW) fglrx(0): Option "Tiling" is not used
    [ 24.723] (WW) fglrx(0): Option "LinearFramebuffer" is not used
    [ 24.723] (II) fglrx(0): X context handle = 0x1
    [ 24.723] (II) fglrx(0): [DRI] installation complete
    [ 24.736] (--) RandR disabled
    [ 24.736] (II) Initializing built-in extension Generic Event Extension
    [ 24.736] (II) Initializing built-in extension SHAPE
    [ 24.736] (II) Initializing built-in extension MIT-SHM
    [ 24.736] (II) Initializing built-in extension XInputExtension
    [ 24.736] (II) Initializing built-in extension XTEST
    [ 24.736] (II) Initializing built-in extension BIG-REQUESTS
    [ 24.736] (II) Initializing built-in extension SYNC
    [ 24.736] (II) Initializing built-in extension XKEYBOARD
    [ 24.736] (II) Initializing built-in extension XC-MISC
    [ 24.736] (II) Initializing built-in extension SECURITY
    [ 24.736] (II) Initializing built-in extension XINERAMA
    [ 24.736] (II) Initializing built-in extension XFIXES
    [ 24.736] (II) Initializing built-in extension RENDER
    [ 24.736] (II) Initializing built-in extension RANDR
    [ 24.736] (II) Initializing built-in extension COMPOSITE
    [ 24.736] (II) Initializing built-in extension DAMAGE
    [ 24.737] ukiDynamicMajor: found major device number 251
    [ 24.737] ukiDynamicMajor: found major device number 251
    [ 24.737] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 24.737] ukiOpenDevice: node name is /dev/ati/card0
    [ 24.737] ukiOpenDevice: open result is 16, (OK)
    [ 24.737] ukiOpenByBusid: ukiOpenMinor returns 16
    [ 24.737] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 25.513] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
    [ 25.597] (II) fglrx(0): Enable the clock gating!
    [ 25.597] (II) fglrx(0): Setting screen physical size to 361 x 203
    [ 25.834] (II) config/udev: Adding input device Power Button (/dev/input/event6)
    [ 25.834] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 25.834] (II) LoadModule: "evdev"
    [ 25.834] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 25.840] (II) Module evdev: vendor="X.Org Foundation"
    [ 25.840] compiled for 1.10.99.902, module version = 2.6.0
    [ 25.840] Module class: X.Org XInput Driver
    [ 25.840] ABI class: X.Org XInput driver, version 13.0
    [ 25.840] (II) Using input driver 'evdev' for 'Power Button'
    [ 25.840] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 25.840] (**) Power Button: always reports core events
    [ 25.840] (**) Power Button: Device: "/dev/input/event6"
    [ 25.840] (--) Power Button: Found keys
    [ 25.840] (II) Power Button: Configuring as keyboard
    [ 25.840] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
    [ 25.840] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 25.840] (**) Option "xkb_rules" "evdev"
    [ 25.840] (**) Option "xkb_model" "evdev"
    [ 25.840] (**) Option "xkb_layout" "us"
    [ 25.868] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
    [ 25.868] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 25.868] (II) Using input driver 'evdev' for 'Video Bus'
    [ 25.868] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 25.869] (**) Video Bus: always reports core events
    [ 25.869] (**) Video Bus: Device: "/dev/input/event12"
    [ 25.869] (--) Video Bus: Found keys
    [ 25.869] (II) Video Bus: Configuring as keyboard
    [ 25.869] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input12/event12"
    [ 25.869] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 25.869] (**) Option "xkb_rules" "evdev"
    [ 25.869] (**) Option "xkb_model" "evdev"
    [ 25.869] (**) Option "xkb_layout" "us"
    [ 25.869] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
    [ 25.869] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 25.869] (II) Using input driver 'evdev' for 'Video Bus'
    [ 25.869] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 25.869] (**) Video Bus: always reports core events
    [ 25.869] (**) Video Bus: Device: "/dev/input/event11"
    [ 25.869] (--) Video Bus: Found keys
    [ 25.869] (II) Video Bus: Configuring as keyboard
    [ 25.869] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/LNXVIDEO:00/input/input11/event11"
    [ 25.869] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [ 25.869] (**) Option "xkb_rules" "evdev"
    [ 25.869] (**) Option "xkb_model" "evdev"
    [ 25.869] (**) Option "xkb_layout" "us"
    [ 25.869] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 25.869] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 25.869] (II) Using input driver 'evdev' for 'Power Button'
    [ 25.869] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 25.869] (**) Power Button: always reports core events
    [ 25.869] (**) Power Button: Device: "/dev/input/event4"
    [ 25.869] (--) Power Button: Found keys
    [ 25.869] (II) Power Button: Configuring as keyboard
    [ 25.869] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
    [ 25.869] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
    [ 25.869] (**) Option "xkb_rules" "evdev"
    [ 25.869] (**) Option "xkb_model" "evdev"
    [ 25.869] (**) Option "xkb_layout" "us"
    [ 25.870] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
    [ 25.870] (II) No input driver specified, ignoring this device.
    [ 25.870] (II) This device may have been added with another device file.
    [ 25.870] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
    [ 25.870] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 25.870] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 25.870] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 25.870] (**) Sleep Button: always reports core events
    [ 25.870] (**) Sleep Button: Device: "/dev/input/event5"
    [ 25.870] (--) Sleep Button: Found keys
    [ 25.870] (II) Sleep Button: Configuring as keyboard
    [ 25.870] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5"
    [ 25.870] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
    [ 25.870] (**) Option "xkb_rules" "evdev"
    [ 25.870] (**) Option "xkb_model" "evdev"
    [ 25.870] (**) Option "xkb_layout" "us"
    [ 25.870] (II) config/udev: Adding input device Laptop_Integrated_Webcam_FHD (/dev/input/event8)
    [ 25.870] (**) Laptop_Integrated_Webcam_FHD: Applying InputClass "evdev keyboard catchall"
    [ 25.870] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_FHD'
    [ 25.870] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 25.870] (**) Laptop_Integrated_Webcam_FHD: always reports core events
    [ 25.870] (**) Laptop_Integrated_Webcam_FHD: Device: "/dev/input/event8"
    [ 25.870] (--) Laptop_Integrated_Webcam_FHD: Found keys
    [ 25.870] (II) Laptop_Integrated_Webcam_FHD: Configuring as keyboard
    [ 25.870] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input8/event8"
    [ 25.870] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_FHD" (type: KEYBOARD, id 11)
    [ 25.870] (**) Option "xkb_rules" "evdev"
    [ 25.870] (**) Option "xkb_model" "evdev"
    [ 25.870] (**) Option "xkb_layout" "us"
    [ 25.871] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
    [ 25.871] (II) No input driver specified, ignoring this device.
    [ 25.871] (II) This device may have been added with another device file.
    [ 25.871] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
    [ 25.871] (II) No input driver specified, ignoring this device.
    [ 25.871] (II) This device may have been added with another device file.
    [ 25.871] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event15)
    [ 25.871] (II) No input driver specified, ignoring this device.
    [ 25.871] (II) This device may have been added with another device file.
    [ 25.871] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event16)
    [ 25.871] (II) No input driver specified, ignoring this device.
    [ 25.871] (II) This device may have been added with another device file.
    [ 25.871] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
    [ 25.871] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [ 25.871] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 25.871] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 25.871] (**) Logitech USB Receiver: always reports core events
    [ 25.871] (**) Logitech USB Receiver: Device: "/dev/input/event1"
    [ 25.871] (--) Logitech USB Receiver: Found 20 mouse buttons
    [ 25.871] (--) Logitech USB Receiver: Found scroll wheel(s)
    [ 25.871] (--) Logitech USB Receiver: Found relative axes
    [ 25.871] (--) Logitech USB Receiver: Found x and y relative axes
    [ 25.871] (II) Logitech USB Receiver: Configuring as mouse
    [ 25.871] (II) Logitech USB Receiver: Adding scrollwheel support
    [ 25.871] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 25.871] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 25.871] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb2/2-1/2-1:1.0/input/input1/event1"
    [ 25.871] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 12)
    [ 25.871] (II) Logitech USB Receiver: initialized for relative axes.
    [ 25.871] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 25.871] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 25.871] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 25.871] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 25.872] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
    [ 25.872] (II) No input driver specified, ignoring this device.
    [ 25.872] (II) This device may have been added with another device file.
    [ 25.872] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
    [ 25.872] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 25.872] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 25.872] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 25.872] (**) Logitech USB Receiver: always reports core events
    [ 25.872] (**) Logitech USB Receiver: Device: "/dev/input/event2"
    [ 25.872] (--) Logitech USB Receiver: Found 1 mouse buttons
    [ 25.872] (--) Logitech USB Receiver: Found scroll wheel(s)
    [ 25.872] (--) Logitech USB Receiver: Found relative axes
    [ 25.872] (--) Logitech USB Receiver: Found absolute axes
    [ 25.872] (--) Logitech USB Receiver: Found keys
    [ 25.872] (II) Logitech USB Receiver: Configuring as mouse
    [ 25.872] (II) Logitech USB Receiver: Configuring as keyboard
    [ 25.872] (II) Logitech USB Receiver: Adding scrollwheel support
    [ 25.872] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 25.872] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 25.872] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb2/2-1/2-1:1.1/input/input2/event2"
    [ 25.872] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 13)
    [ 25.872] (**) Option "xkb_rules" "evdev"
    [ 25.872] (**) Option "xkb_model" "evdev"
    [ 25.872] (**) Option "xkb_layout" "us"
    [ 25.872] (EE) Logitech USB Receiver: failed to initialize for relative axes.
    [ 25.872] (II) Logitech USB Receiver: initialized for absolute axes.
    [ 25.872] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 25.872] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 25.872] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 25.872] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 25.872] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 25.872] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 25.872] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 25.872] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 25.872] (**) AT Translated Set 2 keyboard: always reports core events
    [ 25.872] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 25.872] (--) AT Translated Set 2 keyboard: Found keys
    [ 25.872] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 25.872] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 25.872] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
    [ 25.873] (**) Option "xkb_rules" "evdev"
    [ 25.873] (**) Option "xkb_model" "evdev"
    [ 25.873] (**) Option "xkb_layout" "us"
    [ 25.873] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event10)
    [ 25.873] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 25.873] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
    [ 25.873] (II) LoadModule: "synaptics"
    [ 25.873] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 25.883] (II) Module synaptics: vendor="X.Org Foundation"
    [ 25.884] compiled for 1.11.0, module version = 1.5.0
    [ 25.884] Module class: X.Org XInput Driver
    [ 25.884] ABI class: X.Org XInput driver, version 13.0
    [ 25.884] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
    [ 25.884] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
    [ 25.884] (**) Option "Device" "/dev/input/event10"
    [ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 2000
    [ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 1400
    [ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
    [ 25.884] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report finger width.
    [ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle double triple
    [ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8
    [ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range. defaulting to 0 - 15
    [ 25.884] (**) Option "TapButton1" "1"
    [ 25.884] (**) Option "TapButton2" "2"
    [ 25.884] (**) Option "TapButton3" "3"
    [ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
    [ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
    [ 25.884] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
    [ 25.884] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 15)
    [ 25.884] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 25.884] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: MaxSpeed is now 1.75
    [ 25.884] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: AccelFactor is now 0.082
    [ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
    [ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
    [ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
    [ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
    [ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
    [ 25.885] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse2)
    [ 25.885] (II) No input driver specified, ignoring this device.
    [ 25.885] (II) This device may have been added with another device file.
    [ 25.885] (II) config/udev: Adding input device DualPoint Stick (/dev/input/event9)
    [ 25.885] (**) DualPoint Stick: Applying InputClass "evdev pointer catchall"
    [ 25.885] (II) Using input driver 'evdev' for 'DualPoint Stick'
    [ 25.885] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 25.885] (**) DualPoint Stick: always reports core events
    [ 25.885] (**) DualPoint Stick: Device: "/dev/input/event9"
    [ 25.885] (--) DualPoint Stick: Found 3 mouse buttons
    [ 25.885] (--) DualPoint Stick: Found relative axes
    [ 25.885] (--) DualPoint Stick: Found x and y relative axes
    [ 25.885] (II) DualPoint Stick: Configuring as mouse
    [ 25.885] (**) DualPoint Stick: YAxisMapping: buttons 4 and 5
    [ 25.885] (**) DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 25.885] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
    [ 25.885] (II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE, id 16)
    [ 25.885] (II) DualPoint Stick: initialized for relative axes.
    [ 25.885] (**) DualPoint Stick: (accel) keeping acceleration scheme 1
    [ 25.885] (**) DualPoint Stick: (accel) acceleration profile 0
    [ 25.885] (**) DualPoint Stick: (accel) acceleration factor: 2.000
    [ 25.885] (**) DualPoint Stick: (accel) acceleration threshold: 4
    [ 25.885] (II) config/udev: Adding input device DualPoint Stick (/dev/input/mouse1)
    [ 25.885] (II) No input driver specified, ignoring this device.
    [ 25.885] (II) This device may have been added with another device file.
    [ 25.885] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
    [ 25.885] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 25.885] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
    [ 25.885] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 25.885] (**) Dell WMI hotkeys: always reports core events
    [ 25.885] (**) Dell WMI hotkeys: Device: "/dev/input/event7"
    [ 25.885] (--) Dell WMI hotkeys: Found keys
    [ 25.885] (II) Dell WMI hotkeys: Configuring as keyboard
    [ 25.885] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
    [ 25.885] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 17)
    [ 25.885] (**) Option "xkb_rules" "evdev"
    [ 25.886] (**) Option "xkb_model" "evdev"
    [ 25.886] (**) Option "xkb_layout" "us"
    [ 25.896] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
    [ 39.128] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 39.128] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 39.128] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 39.128] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 52.382] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 52.382] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 52.382] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 52.382] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 53.649] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 53.649] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 53.649] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 53.649] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 54.483] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 54.483] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 54.483] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 54.483] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 54.551] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 54.551] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 54.551] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 54.551] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 54.619] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 54.619] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 54.619] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 54.619] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 54.686] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 54.686] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 54.686] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 54.686] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 54.751] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 54.751] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 54.751] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 54.751] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 54.816] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 54.816] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 54.816] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 54.816] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 54.900] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 54.900] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 54.900] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 54.900] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 55.376] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 55.377] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 55.377] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 55.377] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 55.459] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 55.459] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 55.459] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 55.460] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 55.547] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 55.547] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 55.547] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 55.547] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 55.625] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 55.625] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 55.625] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 55.625] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 55.697] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 55.697] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 55.697] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 55.697] (II) fglrx(0): Modeline "1366x768"x0.0

    Hello,
    i get the same messages without any problems for my intel card.
    You can read more about it in this thread:
    http://forums.gentoo.org/viewtopic-t-85 … ec66f93bf2
    There are a fair amount of people who have posted their /proc/mtrr there, you can compare yours to them.
    In the end they come to the conclusion, that uncachable entries are not a problem, for the most systems.
    However uncachable regions of 1024MB seem to be too large.
    On my mtrr the biggest uncachable entry is 64MB.
    So you might get improvement from solving this.

  • Adding new field to product allocation catalog?

    We are configuring product allocations in SCM 7.0 and have a requirement to add a new field to the standard field catalog for the allocations check.  We have followed the procedure outlined by SAP to add our new field to the structure /SAPAPO/KOMGOZ, add the field to the field catalog, and copied the source code to ERP.
    The issue that we are having is that new custom field that we added to the field catalog is not being populated when we execute /SAPAPO/ATPQ_PAREA_K - Characteristics Combinations from Planning Area.  The product allocations group that is being used in /SAPAPO/ATPQ_PAREA_K has three characteristics. The first two which are SAP provided fields are being populated correctly, but the last custom field we added to the field catalog is not. It is just blank.
    Is there a step that we missed during the configuation.  We are only using this field for the product allocations check (we do not use Rules Based ATP).

    Hi Arnel,
    I was expecting with examples but anyway.
    consider the examples of your CVC
    Country Region brand SO DV DC mat plant  etc...
    now you want to first get confirmation on SO and DV  , Prd allo group with these 2 characteristics
    same goes for all other combinations.
    now if you want to go with Either Or   /And.. decides if you need to go with one product allocation procedure with many prod allocation group  /or/ a sequence product allocation procedure.
    Its very straight forward as such... if you come up with examples, i can give better details.
    Looking at point 3 it looks like you want to go with 'OR' so you will have to go with sequence.
    (tcode: /SAPAPO/ATPCQ_GENER)-  is to check the customizing,  sometime you might move the Prod allocation from dev system and just to make sure there is no issue in transport /missing config.. it will check with transaction code.  I don't think you have to run this every time. After every transport..may be you have too as a caution check.
    Imp:  just to check @ different levels i dont think you will have to create different planning area.  If all the characteristics on which you want to (combinations) is available in one planning area , you should be good with one planning area only.
    Hope this is helpful.  I would suggest to follow what we have discussed so far and then you can create another message after the configuration/approach you finalized  with new issues/concerns you will be facing.
    If issue are really bothering you much, you can reach out to me directly. Let me know
    Pravin M

Maybe you are looking for

  • OSPF with ipsec VTI interface goes down before dead timer.

    I have a strange issue that OSPF will initially start working, hellos are exchanged both ways but then after about 3 – 6 hellos one of the sides stops getting them and the ipsec VTI tunnel drops on router A even before the dead timer reaches 0. Is th

  • Can I use any external hard drive to back up my Mac?

    Hello, I'm new to mac's but have seen Time Capsule. I'm a little confused... Can I go to any shop and buy an external hard drive of say 500GB and then plug it in via USB and back my mac up with the Time Machine? It doesn't have to be a 1TB Apple own

  • Server0  doesnot start and stalls at "starting apps" status

    The Server0 was running fine and suddenly started stalling at "starting apps" status.  The SDM and Dispatcher are running fine. The Java_Home variable is set correctly and the System has 2GB RAM . The Developer Trace file is showing these errors afte

  • Inventory- Sequence for TRANSACTION_HEADER_ID in MTL_TRANSACTIONS_INTERFACE

    Hi all. I'm new to Apps, and I'd like to know the best approach for extracting the TRANSACTION_HEADER_ID when importing inventory transactions using the open interface MTL_TRANSACTIONS_INTERFACE. Is there an appropriate sequence for that, or it can b

  • ToC in the Aggregator

    I have a feeling I already know the answer to this, but is there a way to remove the ToC in the Aggregator?