Memory between global and non-global

Hi,
I've a Solaris 10 with a Solaris 8 brand zone.
from global zone I run prstat -Z and see:
ZONEID NPROC SWAP RSS MEMORY TIME CPU ZONE
+11 463 2639M 1908M *23%* 317:19:31 27% MyZone+
+0 55 109M 112M 1.4% 289:12:46 2.8% global+
from non-global zone the prstat -J command show me:
PROJID NPROC SIZE RSS MEMORY TIME CPU PROJECT
+3 114 19G 18G *27%* 229:18.14 3.1% default+
+1 265 52G 48G *73%* 54:31.44 3.1% user.root+
+0 78 308M 181M *0.3%* 3:39.41 0.0% system+
Why I have got this difference in memory percentage?

from global
-bash-3.2# rcapstat -z 1 1
rcapstat: rcapd is not active
start svc:/system/rcap:default then
-bash-3.2# rcapstat -z 1 1
id zone nproc vm rss cap at avgat pg avgpg
Edited by: 853883 on Oct 10, 2012 2:13 AM

Similar Messages

Cannot convert between unicode and non-unicode string datatypes

My source is having 3 fields :
ItemCode nvarchar(50)
DivisionCode nvarchar(50)
Salesplan (float)
My destination is :
ItemCode nvarchar(50)
DivisionCode nvarchar(50)
Salesplan (float)
But still I am getting this error :
Column ItemCode cannot convert between unicode and non-unicode string datatypes.
As I am new to SSIS , please show me step by step.
Thanks In Advance.

My source is having 3 fields :
ItemCode nvarchar(50)
DivisionCode nvarchar(50)
Salesplan (float)
My destination is :
ItemCode nvarchar(50)
DivisionCode nvarchar(50)
Salesplan (float)
But still I am getting this error :
Column ItemCode cannot convert between unicode and non-unicode string datatypes.
As I am new to SSIS , please show me step by step.
Thanks In Advance.
HI Subu ,
there is some information gap , what is your source ? are there any transformation in between ?
If its SQL server source and destination and the datatype is as you have mentioned I dont think you should be getting such errors ... to be sure check advance properties of your source and check metada of your source columns
just check simple oledb source as
SELECT TOP 1 ItemCode = cast('111' as nvarchar(50)),DivisionCode = cast('222' AS nvarchar(50)), Salesplan = cast(3.3 As float) FROM sys.sysobjects
and destination as you mentioned ... it should work ...
somewher in your package the source columns metadata is not right .. and you need to convert it or fix the source.
Hope that helps
-- Kunal
Hope that helps ... Kunal

About integration between SAP and non-SAP applications via javaidoc classes

Hi,All
Now we are implementing a SAP-Retail project,we encounter a problem of integration between SAP and non-SAP applications(POS),we want to set Inbound/Outbound between SAP and POS applications realtimely,POS can connect to the SAP system via VPN,weather it can be implemented?
I conceive to implement it with SAP Java Connector IDoc Class,I don't know weather it is the best solution?If not,please give some other proposal.
I have download the classes from SAP website and try it with the samples provided by SAP(JCoIDocSample1.java/JCoIDocSample3.java),In my testing,Inbound is succeed,but,in SAP-Retail IS,standard Outbound message type is defined via file port,some one told me that SAP Java Connector IDoc Class can only receive idocs from tRFC port?is it true?If not,please tell me how to deploy in SAP so java program can receive idocs from file port?

We too are interested in finding information on integration between SAP and Intergraph. Were you able to obtain information and I was wondering if could share this with us.
Thanks,
Sue
City of Edmonton

How do you toggle a microphone directly between enhanced and non-enhanced?

Apparently mixing calls between Microphone.getMicrophone() and Microphone.getEnhancedMicrophone() on the same device doesn't work very well. Take the following code:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600" creationComplete="onCreationComplete()" click="Microphone.getMicrophone().setLoopBack(true);">
    <fx:Script>
        <![CDATA[
            import mx.controls.Alert;
            private function onCreationComplete():void
                Microphone.getEnhancedMicrophone().setLoopBack(true);
        ]]>
    </fx:Script>
</s:Application>
You will be able to hear yourself speak at first, but as soon as you click the app, you will no longer be able to hear your voice. I have also seen this sort of thing in other scenarios.
To make a long story short, if you call getEnhancedMicrophone() for one device, then try to call getMicrophone() for that same device, the device will stop providing any audio input. The same is true vice versa. However if you call getEnhancedMicrophone() for one device, then getMicrophone() for a different device, then come back to the first and call getMicrophone() for it, the device will work just fine.
Why? Is there any way to just toggle between enhanced and non-enhanced settings for the same device, without reaching out to an unrelated device? Thanks!

On your Microphone reference you have these constants you can set your options to:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/media/MicrophoneE nhancedMode.html
As you can see there, MicrophoneEnhancedMode.OFF disables enhanced mode. You would set your Microphone references .mode property to equal that to disable enhanced, or use one of the other relevant options to enable it. Thus, you should always use enhanced so you can toggle it.

Dynamic switching between stacked and non-stacked detail groups?

Hi guys,
Is it possible to dynamically switch off/on stacking of detail groups?
I would like to give the user the option to switch between stacked and non stacked
Regards
Bar
JDev: 10.1.3.2
JHS: 10.1.2.26

Yes and No. No because it is not supported out-of-the-box by JHeadstart, yes because you can do this post-generation and then move the custom code to JHeadstart templates.
However, it is not a trivial thing to build, you can try the JDeveloepr forum for any help, we can help you with moving the post-generation code to custom templates, since that is the JHeadstart-related part of your question.
Steven Davelaar,
JHeadstart Team.

Differnce between unicode and non unicode

Hi every body i want to differnce between unicode and non unicode and for what purposes this ulities are used explain me little brief what is t code for that , how to checj version, how to convert uni to non uni ?
Advance Thanks
Vishnuprasad.G

Hello Vishnu,
before Release 6.10, SAP software only used codes where every character is displayed by one byte, therefore character sets like these are also called single-byte codepages. However, every one of these character sets is only suitable for a limited number of languages.
Problems arise if you try to work with texts written in different incompatible character sets in one central system. If, for example, a system only has a West European character set, other characters cannot be correctly processed.
As of 6.10, to resolve these issues, SAP has introduced Unicode. Each character is generally mapped using 2 bytes and this offers a maximum of 65 536 bit combinations.
Thus, a Unicode-compatible ABAP program is one where all Unicode checks are in effect. Such programs return the same results in UC systems as in non-UC systems. To perform the relevant syntax checks, you must activate the "UC checks" flag in the screens of the program and class attributes.
With TC: /nUCCHECH you can check a program set for a syntax errors in UC environment.
Bye,
Peter

SSIS Package : While Extracting Sharepoint Lookup column, getting error 'Cannnot convert between unicode and non-unicode string data types'

Hello,
I am working on one project and there is need to extract Sharepoint list data and import them to SQL Server table. I have few lookup columns in the list.
Steps in my Data Flow :
Sharepoint List Source
Derived Column
its formula : SUBSTRING([BusinessUnit],FINDSTRING([BusinessUnit],"#",1)+1,LEN([BusinessUnit])-FINDSTRING([BusinessUnit],"#",1))
Data Conversion
OLE DB Destination
But I am getting the error of not converting between unicode and non-unicode string data types.
I am not sure what I am missing here.
In Data Conversion, what should be the Data Type for the Look up column?
Please suggest here.
Thank you,
Mittal.

You have a data conversion transformation. Now, in the destination are you assigning the results of the derived column transformation or the data conversion transformation. To avoid this error you need use the data conversion output.
You can eliminate the need for the data conversion with the following in the derived column (creating a new column):
(DT_STR,100,1252)(SUBSTRING([BusinessUnit],FINDSTRING([BusinessUnit],"#",1)+1,LEN([BusinessUnit])-FINDSTRING([BusinessUnit],"#",1)))
The 100 is the length and 1252 is the code page (I almost always use 1252) for interpreting the string.
Russel Loski, MCT, MCSE Data Platform/Business Intelligence. Twitter: @sqlmovers; blog: www.sqlmovers.com

Column "A" cannot convert between unicode and non-unicode string data types

I am following the SSIS overview video-
https://secure.cbtnuggets.com/it-training-videos/series/microsoft-sql-server-2008-business-development/6143?autostart=true
I have a flat file that i want to import the contents onto a SQL database.
I created a Dataflow task, source file and oledb destination.
I am getting the folliwung error -
"column "A" cannot convert between unicode and non-unicode string data types"
in the origin file the data type is coming as string[DT_STR] and in the destination object it is coming as "Unicode string [DT_WSTR]"
I used a data conversion object in between, dosent works very well
Please help what to do

I see this often.
Right Click on FlatFileSource --> Show Advanced Editor --> 'Input and Output Properties' tab --> Expand 'Flat File Source Output' --> Expand 'Output Columns' --> Select your field and set the datatype to DT_WSTR.
Let me know if you still have issues.
Thank You,
Jay

Column cannot convert between unicode and non-unicode string data types

I am converting SSIS jobs from SQL Server 2005 running on a Windows 2003 server to 2008R2 running on a Windows 2008 server.  I have a dataflow with an OLE DB Source which is selecting from an Oracle view.  This of course worked fine in
2005.   This OLE DB Source will not even read the data from Oracle without the error "Column "UWI" cannot convert between unicode and non-unicode. The select is:
SELECT SOME_VIEW.UWI AS UWI,
CAST(SOME_VIEW.OIL_NET AS NUMERIC(9,8)) AS OIL_NET
FROM SOME_SCHEMA.SOME_VIEW
WHERE OIL_NET IS NOT NULL AND UWI IS NOT NULL
ORDER BY UWI
When I do "Show Advanced Editor" on this component, in the Input and Output Properties, I show the OLE DB External Column as DT_STR length 40 for the UWI column and for the Output Columns I see the UWI as the same DT_STR.
How can I get past this? I have tried doing a cast...cast(SOME_VIEW.UWI AS VARCHAR(40)) AS UWI and this gives the same error. The column in Oracle is a varchar2(40).
Any help is greatly appreciated. Thanks.

Please check the data type for UWI using advanced editor for Oledb Source under
external columns and output columns. Are the data types same?
If not, try changing the data type (underoutput columns) same as data type shown under
external columns
Nitesh Rai- Please mark the post as answered if it answers your question

Cannot convert between unicode and non-unicode string data types.

I'm trying to copy the data from 21 tables in a SQL 2005 database to a MS Access database using SSIS. Before converting the SQL database from 2000 to 2005 we had this process set up as a DTS package that ran every month for years with no problem. The only way I can get it to work now is to delete all of the tables from the Access DB and have SSIS create new tables each time. But when I try to create an SSIS package using the SSIS Import and Export Wizard to copy the SQL 2005 data to the same tables that SSIS itself created in Access I get the "cannot convert between unicode and non-unicode string data types" error message. The first few columns I hit this problem on were created by SSIS as the Memo datatype in Access and when I changed them to Text in Access they started to work. The column I'm stuck on now is defined as Text in the SQL 2005 DB and in Access, but it still gives me the "cannot convert" error.

I was getting same error while tranfering data from SQL 2005 to Excel , but using following method i was able to tranfer data. Hopefully it may also help you.
1) Using Data Conversion transformation
data types you need to select is DT_WSTR (unicode in terms of SQL: 2005)
2) derived coloumn transformation
expression you need to use is :
(DT_WSTR, 20) (note : 20 can be replace by your character size)
Note:
Above teo method create replica of your esting coloumn (default name will be copy of <coloumn name>).
while mapping data do not map actual coloumn to the destination but select the coloumn that were created by any of above data transformer (replicated coloumn).

How to fix "cannot convert between unicode and non-unicode string data types" :/

Environment: SQL Server 2008 R2
Introduction:Staging_table is a table where data is being stored from source file. Individual and ind_subject_scores are destination tables.
Purpose: To load the data from a source file .csv while SSIS define table fields with 50 varchar, I can still transfer the data to the entity table/ destination and keeping the table definition.
I'm getting validation error "Cannot convert between a unicode and a non-unicode string data types" for all the columns.
Please help

Hi ,
NVARCHAR = DT_WSTR
VARCHAR = DT_STR
Try below links:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ed1caf36-7a62-44c8-9b67-127cb4a7b747/error-on-package-can-not-convert-from-unicode-to-non-unicode-string-type?forum=sqlintegrationservices
http://social.msdn.microsoft.com/Forums/en-US/eb0d1519-4be3-427d-bd30-ae4004ea9e8d/data-conversion-error-how-to-fix-this
http://technet.microsoft.com/en-us/library/aa337316(v=sql.105).aspx
http://social.technet.microsoft.com/wiki/contents/articles/19612.ssis-import-excel-to-table-cannot-convert-between-unicode-and-non-unicode-string-data-types.aspx
sathya - www.allaboutmssql.com ** Mark as answered if my post solved your problem and Vote as helpful if my post was useful **.

How do I transfer ring tones between ipad and non-apple phone using bluetooth

Can I transfer ring tones between ipad and non-apple phone using bluetooth?

No. iOS devices do not support file transfers between non-iOS devices over Bluetooth.
They probably wouldn't work anyway, as iOS ringtones have to be in a specific format.

What is the programming (ABAP) difference between Unicode and non Unicode?

What is the programming(ABAP) difference between Unicode and non Unicode?
Edited by: NIV on Apr 12, 2010 1:29 PM

Hi
The difference between programming in Unicode or not Unicode is that you should consider some adjustments to make on the Program "Z" to comply with the judgments Unicode Standard.
In the past, developments in SAP using multiple systems to encode the characters of different alphabets. For example: ASCII, EBCDI, or double-byte code pages.
These coding systems mostly use 1 byte per character, which can encode up to 256 characters. However, other alphabets such as Japanese or Chinese use a larger number of characters in their alphabets. That's why the system using double-byte code page, which uses 2 bytes per character.
In order to unify the different alphabets, it was decided to implement a single coding system that uses 2 bytes per character regardless of what language is concerned. That system is called Unicode.
Unicode is also the official way to implement ISO/IEC 10646 and is supported in many operating systems and all modern browsers.
The way of verifying whether a program was adjusted or not, is through the execution of the UCCHECK transaction. Additionally, you can check by controlling syntax (making sure that this asset verification check Unicode).
The main decisions to adjust / replace are (examples):
ASSIGN H-SY-INDEX TEXT TO ASSIGN <F1> by
H-SY-INDEX TEXT (*) TO <F1>.
DATA INIT (50) VALUE '/'. by
DATA INIT (1) VALUE '/'.
DESCRIBE FIELD text LENGTH lengh2 by
DESCRIBE FIELD text LENGTH lengh2 in character mode.
T_ZSMY_DEMREG_V1 = record_tab by
record_tab TO MOVE-Corresponding t_zsmy_demreg_v1.
escape_trick = hot3. by
escape_trick-x1 = hot3.
itab_txt TYPE wt by
ITAB_TXT TYPE TABLE OF TEXTPOOL
DATA: string3 (3) TYPE X VALUE B2023 '3 'by
DATA: string3 (6) B2023 TYPE c VALUE '3 '.
OPEN DATASET file_name IN TEXT MODE by
OPEN DATASET file_name FOR INPUT IN TEXT MODE ENCODING NON-UNICODE.
or
OPEN DATASET file_name FOR INPUT IN TEXT MODE ENCODING DEFAULT.
CODE FROM PAGE TRANSLATE a_codepage record by
record TRANSLATE USING a_codepage.
CALL FUNCTION 'DOWNLOAD' by
CALL METHOD cl_gui_frontend_services => gui_download
CALL FUNCTION 'WS_DOWNLOAD' by
CALL METHOD cl_gui_frontend_services => gui_download
CALL FUNCTION 'UPLOAD' by
CALL METHOD cl_gui_frontend_services => gui_upload
CALL FUNCTION 'WS_UPLOAD' by
CALL METHOD cl_gui_frontend_services => gui_upload
PERFORM USING HEAD APPEND_XFEBRE +2. by
PERFORM USING HEAD APPEND_XFEBRE +2 (98).
Best Regars
Fabio Rodriguez

Difference between deamons and non deamons

Pls someone tell me wat is the difference between deamons and non demons and i know that deamons will run in the background..and pls tell me why they r used...

Actually it's "daemon" (mythologically speaking a little more benign than demons).
A Java program terminates when every non-daemon thread finsihes. Setting a thread to daemon mode simply says that it's ignored for this purpose. It's usually used with background activities that can be abandoned at the end of the program without any need to clean up.
(More widely, in unix, a daemon program is one that runs in the background all the time, from when you boot up the machine to when you close it down.)

Difference between configurable and non configurable finished goods master

Hi
Pl explain the difference between configurable and non configurable finished goods master data.
Thanks
kamala

Hi,
Configurable material are used when you have a large number of combination of parts that go into a product. It means different combinations of the parts for same material. If you maintain a unique material code for each combination , you require a large number of material numbers. KMAT is used in such a case where you maintain just one generic product code. You assign class to this material having all variant characteristics.
A super BOM is maintained for such a material consisting of all possible alternatives. A super routing is also maintained consisting of all possible operations that could be used.
Typically configurable material is used in Made To Order (MTO) environment. However frequently ordered configurations may be planned with a material variant which needs to have a material master record. Thus Material variants may have stock and value. Depending upon characteristic values chosen at sales order entry Sales Order BOM is created. Routing operations are also chosen depending upon which BOM components are assigned to them.
Non configurable materials are like finish, semi finish materials having fixed BOM. A separate/single BOM exits for every finish material.
Revert back for more info.
thanks and regards,
Man

Difference between cumulative and non-cumulative key figures

Hi,
What is the difference between cumulative and non-cumulative key figures and under what conditions they are used. What is snapshort and where it is used.

Hi.............
Basically the key figures are of two types cumulative and non cumulative.
Cumulative are the normal one which you use always and they always bring the new values of the key figures in the delta that is if suppose A has value 10 and after change the new value is 20 then you will use cumulative key figures there, and your delta( new value) will bring 20.
but suppose your key figures field only the change in the prior value that is in this case the delta in the key figure value will bring 10 (20-10- change of 10 )as new value in the key figure A then you will have to model it through the non cumulaitve key figures.
Now
1) Cumulative is for the first case that is if the key figure alwyas brings the new values of the key figure and not the change sin the key fiures value.
2)NCum. value with NCUM value change:
In this case ther is only one field which brings the changes for a particualr key figure and you ahve to define that key figure as non cumulative.
Ex: In case of stock only one filed brings both ingoing value and outgoing value so 10 ,-4,100,-34.....
In this case you will this option and use the key figure here in the space provided.
3) In this case you haev two separate key figures one for the inflow of stocks and one for the outflow of the stocks.
you use one key figure for the inflow and one key figure for the outflow.
The main key figure autiomatically takes care of the logic and gives the correct output upon the summation
net value of stocks( inflow- outflow).
Also do remember in this case the key figure for inflow and out flow are the basic key figures that is cumulative key figures.
A non-cumulative is a non-aggregating key figure on the level of one or more objects that is always displayed in relation to time. Examples of non-cumulatives include headcount, account balance and material inventory. here the aggregation of key figure is based on the another info object
There are two different ways to define non-cumulative key figures:
Non-cumulative key figure with non-cumulative changes:
Before you can define the non-cumulative key figure, an additional cumulative key figure containing the non-cumulative change must exist as an InfoObject.
Non-cumulative key figure with inflows and outflows
There has to be two additional cumulative key figures as InfoObjects for non-cumulative key figures - one for inflows and one for outflows. The cumulative key figures have to have the same technical properties as the non-cumulative key figure, and the aggregation and exception aggregation have to be SUM.
Features of non-cummulative key figures
A non-aggregating key Figure.
Records are not summarized for Reporting
Exception Aggregation is being applied on these key figures on the level of one or more info objects usually with time .
Examples: Head Count, Account balance, Material stock
consider simple senario
Date Net Stock Quantity Sales Revenue
01.02.2005 40 1000
02.02.2005 50 2000
03.02.2005 25 3000
this is the query output if stock quantity has treated as cummulative and non-cummulative key figures
if stock quantity taken as a cummulative key figure
Date NET STOCK QUANTITY SALES REVENUE
01.02.2005 30 1000
02.02.2005 50 2000
03.02.2005 20 3000
RESULT 100 6000
in the above result the key figure has aggregated to the total value that wont give sense to the net stock quantity
if stock quantity taken as non-cummulative key figure
Date Net Stock Quantity (LAST) Sales Revenue
01.02.2005 30 1000
02.02.2005 50 2000
03.02.2005 20 3000
RESULT 20 6000
Hope this helps you..............
Regards,
Debjani................
Edited by: Debjani Mukherjee on Sep 15, 2008 7:22 AM

Memory between global and non-global

Similar Messages

Maybe you are looking for