Memory Card blocked after upgrading my nokia E70

Hello all,
Could you help us?
I had upgrading my nokia E70, and after my memory SD card is blocked, I never got a password.
Thanks in advance
Veve

I assume you have updated the firmware?
I don't know the E70 at all but it is likely that after a firmware upgrade then anything on the card will have been removed. Are you able to format the card? Hopefully you will have a back up that you can restore from but don't restore the settings.
E71-1(241.04) RM-346 300.21.012

Similar Messages

How can I restore my card reader after upgrading to Mavericks?

I have a MacBookPro that is not identifying the SD card reader since installing Mavericks. I have heard that ScanDisk has a patch but I have not been able to download it from their site. I have read that downloading the SandDisk patch on a PC and then transferring it to a Mac will fix the problem. I would sure appreciate some help restoring my Mac after uploading to Mavericks. My firewire drive does not seem to be working either. I cannot use my M-Audio firewire interface for recording and editing in ProTools. This represents a lot of down time and/or a pretty big loss of money for me. Can anybody tell me whether Apple provides support for these types of problems or is it completely up to the user to solve them? I am a relatively new Apple user. I bought the MacBook Pro shortly after they were released, about 2 1/2 years ago. Up to that time I was strictly a Windows user. I am surprised Apple did not seem to go to much, if any trouble to warn me of the difficulty I would have after upgrading to Mavericks. Apple, where are you?

Launch the Image Capture app in your Applications folder.
Conenct the card reader.
Then see if Image Capture recognizes the card unde DEVICES top left side of the Image Capture window.
BEFORE upgrading from one OS X to the next, check the websites for your third party software and hardware for compatibility.
Apple is not responsible for third party software and hardware used with your Mac.

HT4623 iphone 5 blocked after upgrade ios7

After my sim card blocked because of my own doing, suddenly my iphone 5 also blocked. Apparently to do with the latest update and the activation codes. Does any body have the solution to activate the Iphone again?

my simcard got blocked because i mixed the new iphone activation code and the simcard prepaid secure code. then i tried the iphone activation code a couple of times to introduce the PUK code of the simcard. This then also blocked the Iphone. Only emergency calls possible. So I need to unblock my Iphone in order to be able ti introduce the PUK code to reactivate my Simcard. But how do I unblock my Iphone?

Airport Card failure after upgrade to OSX 10.5.6

My airport suddenly down after upgrade to OSX 10.5.6.
It showing "airport card not installed". I work very well in the past 8 moths before upgarde
Any one has same problem ? How can I re-install the Airport card (DIY)
Great thanks
My Macbook is late 2007 with 2.2G (4GB ram)

Hi,
Look at this link http://www.macfixit.com/article.php?story=2005093011343164
Rgrds

HT4623 Can I use lightning SD camera card reader after upgrading my iPad 4 to iOS. 7?

Hi! All,
I am using lightning SD camera reader with my iPad 4 running with iOS 6 without any problem. But I would like to upgrade to iOS 7. I saw some reviews
after upgrading the card reader is not working. I contacted apple support community people for the above issue recently through chat. They said the device should work even after upgrading. I have not yet upgraded. But iOS 7 is tempting with its amazing look. What do I do? If I upgrade and my SD card reader wont work then I will be in great disapppointment. Please help if any body has answer for my problem..
Message was edited by: hemanthkumar.narsetti
Message was edited by: hemanthkumar.narsetti

If your SD card reader is from Apple, you shouldn't have any problems. If your card reader is from a 3rd party source, it's possible to have a problem. Do the update.
 Cheers, Tom

Does anyone have "No sim card" message after upgrading to iOS 7.0.2 on an iPhone 4 ?

Hello,
I've upgraded my iPhone 4 (8 GB model - GSM) to the new iOS 7.0.2 version yesterday evening and strangely enough he restarted fine, but with the "no SIM card" message. After having pulled out and put back in the micro SIM card several times without success, I've restored the iPhone completely to the 7.0.2 update, but the problem still lasted.
I've personally solved the issue by downloading the original 7.0.0 IPSW file and forcing iTunes to restore it: push on Option/Command key while clicking on the restore button in iTunes after putting the iPhone in DFU mode by pressing the Home button when powering on . After the restore everything works fine again and I had just to unlock my Sim Card the regular way in order to activate.
Therefore I'm wondering if anyone else has also encountered this problem and if someone could explain me the origin of this issue.
I'm living in Belgium (Europe) and using Belgacom Proximus as carrier.
Best regards,
Amaury Vaernewyck

Hi MajorChipHazard,
Did my solution work for you ?
Best regards,
Amaury Vaernewyck

A problem with Wi-fi after upgrade to Nokia Belle ...

Good Afternoon
I have a problem with my Nokia 500 (Belle) (Symbian).
I was using a old system and I had my wi-if acess working but after I upgrade my system to Belli my wi-fi doesn´t work. I tried writing the same password but my connection s (Connecting. connectins and fall).
May you help me ?
Is there any configuration if I have to do ?
Thanks a Lot

Hi
Thank you for you post and welcome to the forums.
Firstly try removing the WiFi access point off you device and then reboot the device and reset the router then try re-add the WiFi access point on your phone and see if it connects. If it still doesn't work temporarily removing the password on router then try to connecting to see if this helps.
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

IDM CC 6.7 Extension blocked after upgrading to FireFox 3.6.6

Well everything was going fine till i upgraded to ver 3.6.6.
After running two-three times,it says Firefox blocked IDM CC for your protection.
And i really want that add on enabled as i use IDM as my download manager. Please hel me.

Hey pleasse help, i need that plugin to work! My internet connection really sucks and it helps me get my antivirus updates etc faster.

Arobat blocked after upgrade to mac os mountain lion

Hello. Updated to Mac OS 10.8.3. Everything in Creative Suite went along just fine, exept Acrobat Pro: cannot open, ghostbusters symbol on icon. What to do? I'd re-install but I don't know how. And cannot open the uninstaller. same block.

Hi, thanks for your reply. Here's what I see on my screen. It's more like a stop sign.
Or is this an Apple issue?

Smtp outgoing (port 25) blocked after upgrade

Since upgrading to mavericks, all outgoig access on port 25 never connects.
I havd upgraded 2 machines - One is working and the other is not work. Both machines were working before the upgrade.
This is NOT just related to the mail client - It affects port 25 outgoing at the telnet level.
Does anyone have an answer to this yet?
Tim

Hi Layman,
According to your description, my understanding is that you want to configure the SMTP to use port 465 for outgoing email in SharePoint.
Per my knowledge, Exchange server will secure communication over any port, but will not use SSL, so there is only TLS encryption in SMTP.
To use port 465, we can add the port 465 under Network tab to the Receiver Connector for SharePoint Outgoing email. And then TCP port number on Outbound Connections in
DSMTP Virtual Server properties.
More references:
http://blogs.technet.com/b/tirumals/archive/2012/03/17/step-by-step-configuration-of-outgoing-emails-from-sharepoint-to-microsoft-online.aspx
http://support.microsoft.com/kb/829721/en-us
http://social.technet.microsoft.com/Forums/exchange/en-US/8dc08cf8-8662-4a02-a181-f821e8d59d06/exchange-smtp-using-port-465?forum=exchangesvrgenerallegacy
For more information, you can post your question to the forum for Exchange: http://social.technet.microsoft.com/Forums/exchange/en-US/home?category=exchangeserverlegacy .
More experts will assist you, then you will get more information relation to Exchange.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Wireless Card Problems after Upgrade

Hi,
Just updated to new kernel and udev... got everything running back to normal without much problems cept my wireless card.
I got a cardbus card so I have to use ndiswrapper to load it.. but if I boot up with the card in, the computer freezes at the network module. It will boot up without the wireless card inserted.. but once I login and insert it it freezes up.
I've tried rmmod ndiswrapper module but that freezes up the comp too..
Anyone have any suggestions???

As I understand it my laptop has been fine and it uses broadcom-wl, and I just re-yaourt it each time my kernel version changes using a cable in my router. But I believe there is something called dkms and a version of the driver for it, which (I haven't read fully into it) is something like a separate tree, which can (from what little I've read) eliminate this need to recompile every time, however I literally read this 5 minutes ago, from the AUR page for broadcom-wl and a quick google so I wouldn't be surprised if there is more to it than that.

E90 Memory card problem!

Ok so i just updated my phone and it tells me to put memory cards password. Is there some kinda "normal" password that i could use to unlock it? I cant remember my old password ( I dont remember putting it...) and i cant get access to my phone !!!!!

I see there are a lot of users who have had resoults by trying different codes. Some seems to have solved it by entering 12345 or 1, or just 0, or the pin code...
Do you have some sort of code you've used for different things? It should not really ask for a code if you have't set one. Date of birth etc?
You could try reading these links to. I've no guaranty that it will work, but users claims that it has: /t5/Eseries-and-Communicators/Nokia-E71-amp-memory-card-password-after-fw-upgrade/m-p/555069#M50780

Transfering recieved files to the memory-card!!!!

Hi,
I transfer files/pictures to my E71 via the Bluetooth but have a couple of problems!
1- If the file is bigger then the available phone memory (max 110 meg!) then i can't transfer! That i understand but does it exist any way to configure the phone to save the recieved files directly to the memory-card?
2- Those files that do get transfered to the phone, you have to open first before being able to transfer it ti the memory-card! Problem is some times the phone memory is not enough to even open it so you can't open it nor save it on the memory-card!
3- There seem to be NO "transfer file" option between the phone memory and the card memory!
Anyone knows something?
Cheer's

If you go into Messaging, hit Options, choose Settings and then Other, then you can change the "Memory in use" from phone memory to the memory card. After that all incoming messages will be stored on the memory card.
You can also use Nokia PC Suite and use its Windows Explorer extension (Nokia Phone Browser) to copy files directly to the memory card also over Bluetooth (without going through Messaging at all).
Latest PC Suite from here: http://www.nokia.com/pcsuite

N73ME Themes Problem after upgrading to new firmwa...

Hi All,
I bought an N73 Music Edition when it was in 3.07 firmware version. Now I have upgraded it using NSU to 4.07.
Currently I am facing a problem when trying to switch to some of the themes I installed before upgrade. These themes are not displayed in the Apps Manager.
When I select Preview or Apply for these themes, the phone hangs and only the battery removal can help me to get rid of that state.
Is there any way to remove such themes from my themes list?
(I didn't restore my SD card items after upgrade. I just reinstalled the programs again.)
Thanks.
Girish Adat
[ N73ME - V4.0812.4.2.1/21-03-2008/RM-133/(c) Nokia N73 Z5-01 ]

Thanks dude. Its solved...!!
Actually the theme name was not visible. I tried trial and error method...
There are 4 files in the folders of working themes.
When I deleted one folder with only 3 files, the problem is solved.
The .ini file and the folder are named with some number-alphabet name, may be hex. And 3 files with just "themepackage" as the file name.
I deleted one folder with only .mdm and .skn files and the .ini file. The other file missed some how during the backup restore after last software upgrade...
Also some empty folders were there. I deleted them also with a backup in my lappy. But no errors were found after that...
Thanks a lot...
Girish Adat
[ N73ME - V4.0812.4.2.1/21-03-2008/RM-133/(c) Nokia N73 Z5-01 ]

Does E5 support 32GB memory card?

Hello members,
I have Nokia E5 handset. I am planning to upgrade it's memory card now. As per Nokia my handset supports upto 32 GBs of card (MicroSD). Now i want to ask you people that can i really use 32GB crad in it or shall i buy 16 GBs card instead? I am asking this because some of the dealers at my place said not to use maximum-supported card in nokia as it can hang or freeze the mobile. So, is it true???
Also, since i can't get this card at my place i am planning to buy it from Ebay.in. I never used that site or any other site for shopping. So, is it safe and trustworthy or shall i get the card from any shop????
Please suggest me.
Thanks.
Moderator's note: Title edited. Nokia Support Discussions accepts no commercial publicity of any kind.

@optiontips
I use a 32GB microSDHC in my E72 a similar S60 3rd FP2 device without issue. Please bear in mind that there were a lot of counterfeit 32GB cards circulating upon auction sites when first released due to their (then) high value based on 2GB cards which reported erroneous capacity.
Moderator's note: Title edited.
Happy to have helped forum with a Support Ratio = 42.5

Memory Card blocked after upgrading my nokia E70

Similar Messages

Maybe you are looking for