Memory card dont read (8520)

Hi, when I enter a mmc the phone don't pickup the mmc? Is it software or hardware problem please help me!

OK...you have a long way to go...let's see.
That is not your model number -- go to Options > About. First line is your model number. The third line is your OS level.
You might find a lot of beginner help here:
http://na.blackberry.com/eng/support/blackberry101​/
Also, since you bought it from a friend, did both parties perform all the required steps here?
KB05099Steps to take before selling or after buying a previously owned BlackBerry smartphone
Further, you failed to answer my last question (#6). Has this happened for the entire time you have had the BB? Is it new behavior? What changed when it started?
Here is my general guideline for uncaught exception errors:
There's pretty much no diagnosing those -- they are the equivalent of the random errors in Windows for which tracing the root cause is fruitless. Basically, these are the last out in the programming code -- some event occurred for which there is no handler in the code. The fix is a code update that handles the event...but, again, knowing what the event is is pretty much impossible. So, there are a few things to try:
Sometimes, the code simply becomes corrupt and needs to be refreshed -- just like a reboot:
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
There might be an updated code set from the carrier -- check them via this portal:
 http://na.blackberry.com/eng/support/downloads/dow​nload_sites.jsp
The toughest possible cause is a badly behaving app. To find it, there are a couple of options. One is to see if you can read the log file:
Go to the home screen. Hold down the alt key and type 'lglg'. (You will not see anything while you type).This will bring up the log file. Scroll down (probably many pages) untill you see a line that says 'uncaught execption'. Click on this line. The name of the app will be in the info.
The other method is to remove apps one at a time, waiting a while in between (I usually recommend a week), until the problem ceases...thereby discovering the offending app.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Approved method of removing memory card from reader

    In the past, I have just removed the memory card from the reader when I was finished with it, but I have since read that that is not good practice. The method mentioned in my book is "Click the tiny Eject button next to the card's name in the Source list, and then remove the card from the reader". The problem with that is that I have no such Eject button in my Source list, and no card name appears there, either. First of all, is it wrong to just remove the memory card without any preliminaries? Second, what do you do when there is no Eject button and no card name?

    <but there is a link reading "CANON,,,DC>
    what do you mean by "link"?
    <....icons for 12 files appears>
    are the 12 files =12photos or 12 folders?
    if you see the photos, (usually DSC000143.jpg or similar) then create an empty folder on the desktop and drag & drop theses 12 photos on the empty folder. And that's it you now have uploaded the pics from card to computer.
    Eject the card reader, drag to trash.
    Then you can launch iPhoto.
    Drag & drop that empty folder over iPhoto et vloia all your pics are imported to iPhoto.
    You can now delete the empty folder to the trash.
    or it's up to you where you want to put them. In iPhoto or anywhere else.
    and that's it!
    michel

  • Sat P105-S2036 WinVista SD memory card device not shown in WIndows Explorer

    The label on the botton of the laptop says the Model Number is PSPAOU-1W2036. I have had it for about 2 years. It has a single slot SD memory card only reader in the front. During this time till 2 days ago, it ran factory installed Windows XP MCE just fine. This SD reader shows up in Device Manager as well as in My Computer Windows Explorer window as a drive with letter D since I renamed the DVD drive to letter R. During the last two days, I successfully upgraded the operating system to Windows Vista Ultimate. Everything works fine except that the SD memory card reader no longer shows in neither Device Manager, nor Windows Explorer. But the Device Manager does show a working SDA Standard Compliant SD Host Controller, and a nonworking Mass Storage Controller (missing driver) under Other devices (See Attachment 1). What needs to be done to make the SD memory card reader a working device in Windows Vista? Thank to answers in advance.
    Solved!
    Go to Solution.
    Attachments:
    01 Device Manager shows SD Controller but no SD reader device.txt ‏2 KB

    Thanks to Moderator Trina for moving my inquiry to Moved: /t5/General-Technology/Sat-P105-S2036-WinVista-SD-memory-card-device-not-shown-in/m-p/34845#U34845
    There I searched for SD and found co-member kaidssss' 2009 February 27's post "SD memory Cards Slots" which was resolved by Super Contributor Jerry_Lippey in less than 3 hours with this CSD.Toshiba.com driverweb page
    TI Card Reader Driver for Windows Vista/XP at
    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/download.jsp?soid=1713025
    THANKS.

  • Lightroom starts every time i put in a memory card.

    Lightroom starts every time i put in a memory card or a USB stick with photos. Is it possible to turn off this feature? I want to determine if the program should start.

    Go to:
    Edit >> Preferences>> General (tab)
    Lightroom >> Preferences>> General (tab) on Mac OSX
    Uncheck the box: Show import dialog when memory card detected.

  • Laptop computer HP Pavillion dv7 does not show sd memory card

    I put my 16 GB SDHC  class 10  new memory card  into my laptop memory card slot reader
    but the computer does not even show an icon for the memory card slot reader. When I pushed the card all the way in
    my Kaspersy Virus software asked me if I wanted to scan the new memory card. So it was recognised by Kaspersy.
    What to do? I am trying to download a firmware upgrade for a camera I own. I have dowloaded the firmware but cannot tranfer the file because the computer is not showing an icon for the memory card.

    Formatting in post #2 was removed. Reposting: Further details added as found: Selecting Device Manager | View | Devices by Connection and browsing down the tree shows: dv7-3060us -- ACPI x64-based PC ---- Microsoft ACPI-Compliant System -------- AMD PCI Express (3GIO) Filter Driver ---------- PCI Standard PCI-to-PCI Bridge 1394 ------------ OHCI Compliant Host Controller ------------ JMB38X MS Host Controller ------------ JMB38X SD Host Controller ------------ JMB38X SD/MMC Host Controller ------------ JMB38X xD Host Controller Examining details on above shows this: Device Class GUID {4d36e970-e325-11ce-bfc1-08002be10318} PCI bus 10, device 0, function 3 Any troubleshooting hints? Could a connector worked loose from the motherboard?

  • Memory card problems please help!

    Ok I've never quite been able to figure this one out, and I figure this is the forum to come to to try and fix it. I have a Canon photo printer with memory card slots I've been using for a while now as a stand alone. Now that I have my iMac I decided to hook it up but here's the problem. When I try to delete selected pictures from a memory card I can't because it's read-only, and I can't change it to read-write. If fact when I connected my camera to my old Windows PC I couldn't do this either. iPhoto asks me after the import if I want to blank out the memory card, but I want to keep certain photos on the card. I just want to go in and delete files like any other USB drive. I tried "Get Info" but there is no way there to change to read-write. This is more of a problem with the memory cards than my printer or iPhoto, but if anyone knows a way around this I'd really appreciate it.

    ... also I've checked the little write-protect tabs, I have 2 SD cards and both are not set to lock and neither lets me A. delete anything or B. put any files back onto them. In my experience it seems that on both Mac and PC they have tried to over-simplify the process of managing digital photos by forcing you to use applications rather than learn simple file management(i.e. cut, copy and paste). I don't know why photos have to be different from every other file type. If I put in my Memory Stick Duo in my PSP and connect with USB I can delete and move whatever I want just like I've always been able to, even photos. It seems that as soon as an SD memory card comes in contact with a camera(mine's a Canon PowerShot) the only way to put anything onto it is to take a picture. Again if anyone knows how to change photo memory cards to read-write status it would be fantastic.

  • Use memory card of N81 installing apps from Ovi St...

    Hi,
    Is there any way to use the memory card of the N81 for install apps from the Ovi Store?
    Thanks in advance!

    Open Nokia Store on your phone and log-in..Then go to Options-->Account-->Settings-->Installation Preferences-->..and select Memory Card ..

  • Satellite Pro P100-327: memory card reader does not read Memory Stick Duo

    I just got a P100-327
    http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/productPage.do?service=UK&PRODUCT_ID=121991&toshib aShop=true)
    which, according to that page, is supposed to have "1 x 5-in-1 Bridge Media slot (supports SD Card, Memory Stick, Memory Stick Pro, MultiMedia Card, xD-Picture Card)" but the pdf user manual that came with it says that it does not support Memory Stick Duo, Memory Stick Pro Duo or mini-SD.
    However, I have a Memory Stick Pro, and a Memory Stick Pro Duo in a Memory Stick Pro adapter and the reader can't seem to read either of them (they should both count as Memory Stick Pro which should be readable right?)
    Should I be able to read my Memory Stick Pro cards? Why can't I since it says I should be able to? Do I need to install something first?

    Hi
    In my knowledge and according to the manual the Bridge Media slot supports Media of type
    - SD Memory Card
    - MultiMediaCard xD-Picture Card
    - Memory Stick
    - Memory Stick Pro
    Please note that the Memory Stick and Memory Stick Pro are not the same as Memory stick Duo and Memory Stick Pro Duo.
    Dont mix it.

  • Memory Card Reader Problem

    Hi,
    I have a HP Pavilion Entertainment PC DV7-1002ea laptop, which has a multi card reader on the left side.
    However i dont know what cards i can inster directly in, i have tried my SD card and Sony Pro card but they dont seam to fit.
    Can someone please advise?
    Do i need some kind of adaptor?
    Regards,
    jay

    Yes you need an adapter. If you get a mobile phone, camera etc. there should be an adapter in the box case. I got one with my Sony Ericsson(M2 to usb). I haven't got an adapter with my HP laptop but got one with old Toshiba one. Looks like this..
    http://www.svp.co.uk/technology/peripherals/kingston-microsdhc-memory-card-with-sd-adapter-class-4-k...
    I would recommend something like this..
    http://accessories.euro.dell.com/sna/productdetail.aspx?c=uk&l=en&s=bsd&sku=A2309413&cs=ukbsdt1&dgc=...
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

    My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

    answered in your other thread LR 4 suddenly no longer recognizes files.

  • HP Envy Touchsmart 15-J104sa Memory Card Reader not working

    I took delivery of an HP Envy Touchsmart 15-J104sa running Windows 8.1 this week and the internal memory card reader isn't working. It doesn't recognise any SD cards (I've tried more than one) and continues as if nothing has been inserted; showing no error messages. All of the cards work on my previous HP laptop. The only way to get the laptop to show an inserted SD card is to run the driver update software (http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63415.exe) every time an SD card is inserted; this must be done with the card in the reader. If the software is run and then the card is inserted nothing happens. If the card is ejected and then re-inserted (or a new card inserted) it isn't recognised and the process has to be restarted and the driver reinstalled even though nothing has changed.
    Can somebody please help me with this issue or I will have to return the laptop to HP. I do a lot of photography so being able to read an SD card quickly and reliably is extremely important for me; it's not a problem I expected from a brand new laptop straight out of the box.
    Thank you all.
    This question was solved.
    View Solution.

    Unfortunately non of the driver updates solved the problem but a BIOS update through the HP Support application seems to have remedied the issue. Whilst I appreciate there were no specific drivers available I find it hard to accept that HP should be able to release a model where they know the hardware will not be fully supported by the OS and in this case not function.

  • Laptop will not read any memory cards

    Laptop Model: Satellite P500 (PSPE8C-026006)
    I have tried several times to get this memory card reader to work. At first, I tried putting in a memory stick PRO Duo with the memory stick pro adapter (so that it could read it), and I was getting a "File I/O" error and that the stick had to be formatted. I tried again with several other different sticks and got the same error. I then tried to update the drivers for the device and still no luck. But now, the memory stick is not even being detected at all.
    Could someone please give me a good link to the latest driver for this memory card reader + how and where the device will appear on the Device Manager list so I know it's properly installed.

    Satellite P500-026 (PSPE8C-026006)
    (Windows Vista Home Premium 64-bit) 
       Card Reader for Windows Vista 64bit, 2.0.06A, 6/24/2009
       O2 Card Reader Controller-2.0.06A.zip
    My card reader (in a Lenovo machine) is under PCMCIA adapters in Device Manager.
    -Jerry

  • USB memory card reader not working since latest security update

    Hi, I have an iApp CR-e500 multi-format memory card reader; worked great prior to the latest security update. Now every time I plug it in I get the following errors in the console:
    Oct 19 03:37:00 dachshund kernel[0]: USBF: 1496.818 AppleUSBEHCI[0x1b4d800]::Found a transaction past the completion deadline on bus 91, timing out!
    Oct 19 03:37:00 dachshund kernel[0]: USBF: 1496.826 AppleUSBEHCI[0x1b4d800]::DoIOTransfer - error 0xe000404f queueing request
    The reader works fine on my office Windows laptop and my USB pendrive still works on my Mac, so the USB ports appear to be functional; they just don't like this thing anymore.
    Was there a USB driver change? If so is there anything I can do to sort this? I suppose I could just buy a new card reader if someone can confirm one that works with the latest security update of 10.4.11, that would be great.
    Alternatively if Apple could please loosen up whatever they tightened in their USB drivers that would be nice as well...

    Disregard. Looks like it's the memory card I'm trying to mount; not working on the Windows machine either.
    Sorry!

  • How can I make my mac book pro read a SDHC memory card

    Can someone tell me how to make my mac book pro read an SDHC memory card?

    http://support.apple.com/kb/HT3553

  • HP8730w Ricoh Media Driver 2.10.00.04 no longer works in 5-1 memory card reader

    Ricoh Media driver 2.10.00.04 no longer works on 5-1 memory card reader.  Re-installed Ricoh Media Driver 2.10.00.04 from HP Support Center HP Elitebook 8730w Mobile Workstation software download page.  No change.  Card reader does not function.  Put memory card in HP Elitebook 8440w, and it's 5-1 card reader reads it okay.  So the memory card is fine.  I suppose I need an updated driver.  Need Help!!!    Thank you.

    What version of iPhoto do you have?  With Yosemite you must be running iPhoto 9.6.1 which is a available from the App Store.  If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll have to download and apply the  iPhoto Library Upgrader 1.1 to the library before opening it with iPhoto 9.6.1. It'll be located in the Applications/Utilities folder after downloading.
    Now for your system:
    Startup Items: ℹ️
        ChmodBPF: Path: /Library/StartupItems/ChmodBPF
        Startup items are obsolete in OS X Yosemite
    Either remove this or update it so it's compatible with Yosemite.
    Get rid of the antivirus software as rkaufmann87 mentioned.  It's not needed.
    User Launch Agents: ℹ️
        [failed]    com.goacemjobhmmbdlbbfjgifjcojdfnjfm.updater.plist [Click for support][Click for details]
    Don't know what this is for.  There was no info on Google about it so remove it.
    Currently you're not having any memory problems since your Page-outs are essentially non existent. You can check it as you work with Activity Monitor.
    Virtual Memory Information: ℹ️
        958 MB    Free RAM
        1.48 GB    Active RAM
        795 MB    Inactive RAM
        616 MB    Wired RAM
        4.25 GB    Page-ins
        24 MB    Page-outs
    As long as the memory pressure is in the green and constant and you're not seeing a lot of SWODs you shouldn't be concerned about the memory.  Of course increasing memory will nearly always improve general system and application performance. But you didn't mention slowness as part of your problem.

Maybe you are looking for

  • Urgent Help! Errors in source system(RSM     340)

    Need urgent help. Issue in production. I added fields to the COPA datasource, by changing the operating concern. I recreated the datasource with the same name replicated into BW & ran delta again. The whole procedure worked fine in Dev & Quality but

  • Change Item Description in Purchase Requisition

    Hi, Purchase requisition is created automatically from the maintenance order in IW31. Here the requirement is to change the item description (Short Text) in the purchase requisition. In ME52N when I tried to manually change, the item text is greyed o

  • How to change TreeModel into DefaultTreeModel?

    //This is my own TreeModel class: package xj.guieditor; import javax.swing.*; import javax.swing.event.*; import javax.swing.tree.*; import org.w3c.dom.*; import java.io.*; import java.util.*; import java.awt.*; import java.awt.event.*; * <p>Title: <

  • Safari has locked up

    Safari froze and I'm getting a full screen message saying that my system has been partially damaged. It tells me to contact apple support immediately...but the phone number it gives is not apple's. It also gives an address of http//www.technocalll.co

  • Getting "Error in setting DHCP Scope Network and Netmask"

    Hello Cisco Experts - I'm trying to setup a new DHCP scope on my Cisco 2504 and am getting the error referenced above.  Here are the settings I am using: I have another range setup in exactly the same way only it runs from 10.35.209.65 through 10.35.