Memory card in 6500s not visible

Dear all,
Suddenly i am unable to see the memory card in my phone menu. It was working properly and now i just dont see it. I have tried removing it and then inserting again, but to no avail...the card becomes visible if i put it in another phone. Can somebody please help.
Its URgent
Thanks

There is a problem with the back cases on these models.
On the back case is a clip that pushes on a button on the back of the phone near the memory card holder.
You could just bend the case slightly where that clip is and this might solve your problem, alternatively you could take the phone to a Nokia Care Point.
You can find the nearest NCP to you at the Store Locator
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left.

Similar Messages

  • After update my memory card slot is not working

    after update my memory card slot is not workingplease help me 

    Hi!, SHAIKE: Welcome, to Forum !. For help you, is necessary what, indicate brand, model and Operating System of your device.

  • Satellite Pro P100-327: memory card reader does not read Memory Stick Duo

    I just got a P100-327
    http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/productPage.do?service=UK&PRODUCT_ID=121991&toshib aShop=true)
    which, according to that page, is supposed to have "1 x 5-in-1 Bridge Media slot (supports SD Card, Memory Stick, Memory Stick Pro, MultiMedia Card, xD-Picture Card)" but the pdf user manual that came with it says that it does not support Memory Stick Duo, Memory Stick Pro Duo or mini-SD.
    However, I have a Memory Stick Pro, and a Memory Stick Pro Duo in a Memory Stick Pro adapter and the reader can't seem to read either of them (they should both count as Memory Stick Pro which should be readable right?)
    Should I be able to read my Memory Stick Pro cards? Why can't I since it says I should be able to? Do I need to install something first?

    Hi
    In my knowledge and according to the manual the Bridge Media slot supports Media of type
    - SD Memory Card
    - MultiMediaCard xD-Picture Card
    - Memory Stick
    - Memory Stick Pro
    Please note that the Memory Stick and Memory Stick Pro are not the same as Memory stick Duo and Memory Stick Pro Duo.
    Dont mix it.

  • Satellite M60-104 - memory card reader does not read memory stick pro duo

    Hi guys,
    the built in card reader on my laptop does not recognize/read sony's memory stick pro duo - is this normal or not?
    I know it should read memory stick pro but not sure about pro duo.
    Can you help me please?

    Hi
    >the built in card reader on my laptop does not recognize/read sony's memory stick pro duo - is this normal or not?
    Of course this could be normal behavior because not all cards are compatible and supported.
    I would recommend taking look into the user manual because there you can find a information which cards can be used in the notebooks card reader!!!

  • Satellite L650-116 memory card reader is not working

    Hello
    I have a problem with built-in memory card reader. Do not read my SD card at all, drivers installed.
    Please help.

    Hi
    The notebook supports an BRIDGE MEDIA SLOT which support this card formats;
    SD Card 8MB-2GB
    SD-HC 4GB-32GB
    Memory Stick 128MB-256MB
    Memory Stick Pro 256MB-16GB
    mini SD 32MB-2GB
    SDXC 64GB
    As you can see, the notebook is able to read max 2GB SD card.
    The card reader will not read bigger SD cards.

  • My Memory Card Reader is not Working...

    I was Purchased LENOVO 3000 N200 notebook last month. All devices and working properly. But my MEMORY CARD READER (5 in 1) is not working. I was downloaded drivers and installed in my laptop, but when i'm inserting memory card in to slot it is not showing any message in my laptop. But Green LED is blinking.
    Please give me instructions how to use MEMORY CARD READER...
    ashok

    Although the best way to read your memory card, memory card readers can be a pain. I've had a few I've just thrown out. Make sure the USB connection to the port is fully seated. Make sure the memory card is fully seated in the reader. Do you have an SD card because the reader in the iMac is by far the most reliable I've used.

  • My memory card slot is not working

    i use a hp pavilion 15-e016TX when i insert a memory card into d slot nothing happens it neither opens nor reads d memory card is it a software or hardware issue 

    see part 1.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Deleting from memory card Q are not errased.  Have I missed a sertting some

    I get the same dialogue boxes at the end of import in 2.0, but when I click on erase images on card, they are not erased. Have I missed a setting somewhere?
    Mark

    It is much preferable to always reformat cards in-camera. There are multiple reasons for this, the most obvious being that each camera's individual firmware is best for getting a card set up for the next round of pix on that camera.
    Another reason is that such a workflow means ejecting the card prior to reformatting, which means you can also check the images on the computer prior to erasing the images on the card, with 100% certainty that the images reviewed on the computer are not mistakenly being reviewed directly from the card.
    Personally I also think it best to backup the images newly copied to the computer after ejecting but prior to erasing/reformatting the CF card. That way 2 copies of original pix exist prior to any editing or erasure of CF media.
    -Allen Wicks

  • Credit card payment method not visible

    How can that be? Im in Vietnam, my billing address is danish.

    Hi Ramesh,
    If you take a look at the answer I gave you to one of your questions (Re: Payroll and Payslip generation you will see that you have to run "Prepayments".
    You can view the results (including the payment method) on the following forms:
    1) View > Payroll Process Results
    or
    2) View > Assignment Process Results
    Regards,
    Pablo

  • HELP HELP HELP .Memory card not working in E71

    I have bought a brand new E71.I am not able to access the memory card on E71.The mobile is accepting the card without the sim card.When i put in the sim card with the memory card it is not working.Memory card is only working without the sim.The same memory card is working in other E71.Is there any way to solve this issue.The card is also readable in the computer.I tried restoring factory settings.Anyways to solve the issue.
    Thanks in advance

    Hi,
    did you:
    1)try to reformat this card in phone?
    2)check other memory card in your phone, it can be some hardware failure.
    Message Edited by hieronim69 on 20-Jan-2009 10:58 PM
    N95 & N96 User

  • USB ports and memory card slots not working

    My Pavilion a6120n desktop has worked brilliantly ever since I purchased it. As of last week the 2 usb ports in the front and the 2 unused usb ports in the back have stopped working. My printer is plugged into one rear port and my wireless mouse is plugged into a second rear port and these work fine.  I generally use a memory stick for data swapping or the card reader slots (which have also stopped working). I no longer see the memory card icons in the "Computer" window. When installing something new the "New Hardware Found" statement pops up but the driver install always fails. I think it is a software issue but there are no usb drivers to download on the HP/support site that I can find. . . so . . . Below is what I have tried so far.Run antivirus software. Full scan & memory scan - no issuesRun malewarebytes full scan - no issues I have tried restarting several times with no success. Restore to several previous restore points = failedRestarting computer in repair mode = failedRun the repair disk that I had made = failedChecked the power management for each usb port to see if the power was routed properly = okRemoved the case cover and carefully inspected the wiring and connectors.finally I tried uninstalling the usb drivers = failed  Upon restarting the computer the last time the startup file must have failed and after several hours of attempting a repair I had to reinstall the Window 7 completely. Still no usb or memory card function. Any help would be appreciated Thanks,MrBob38

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how the USB ports and memory card slots are not working, and I would be happy to assist you in this matter! Since you mentioned that you have already re-installed Windows 7 on your computer, and the USB ports still do not work, please contact our technical support for further assistance in this matter by clicking the link below to get the support number for your region.
    www.hp.com/contacthp/
    I hope this helps!
    Regards

  • Why PCI reflective memory card can not be detected?

    It was confusing when I use a VISA Find Source node to detect instruments connected to my computer. A VMIC's reflective memory card----VMIPCI5565---can not be found while it could function well with its  own exacutable programme borned with driver. What's more worse,a VXI structure that copmosed of a HPE8491 0-slot controller and a HPE1412 Multi-Meter did not turn up either. And the VXI structure is connected with computer by a IEEE--1394 adapter which was ploted in a PCI slot. 
    SO , it is the problem related to hardware or some others? How to find the instruments that are un-NI products?

    There seems to be application clashes to use the device whenever connected.
    Download and install the latest version of PC Suite 7.1 (Supports Windows 7, also please uninstall the previous version of PC suite exists in your computer before proceeding.
    Download PC Suite Cleaner
    - http://nds1.nokia.com/files/support/global/phones/software/Nokia_PC_Suite_Cleaner_7_1_1.exe
    PC Suite 7.1 (Win 7 support download link)
    - http://nds1.nokia.com/files/support/global/phones/software/Nokia_PC_Suite_7_1_40_1_eng_web.exe
    Also, please feedback the results as the results could be useful to other members / visitors.
    Thanks & best regards,
    XM
    I'm an Xploit - Please feel free to post your issues, feedbacks in this discussion forum and I'll do my level best to help, otherwise my knowledged friends whom are around willing to help you. Thank you !

  • 6120, memory card...where are my texts?

    Hi,
    I have a nokia 6120 with a memory card i added myself. I have it set so that my text messages are saved there and when i look at the device it says that it has 1471kb of messages stored on it.
    I recently got a macbook with bluetooth and am trying to back up my messages onto the computer....but i can't find where the messages are! I can find the images, but when i look through there are no messages.
    Is it because the format isn't recognised by the computer or something?
    I'd just like to back them up, I think you can do it in the pc nokia suite...no?
    any help very appreciated!
    cheers
    x

    Text messages are not stored straight into text files. They must have been stored on the memory card in some other format, most probably binary format, which isn't readable.
    To make a backup of your messages, you should use Nokia PC Suite. Below is a list of contents that can be back(ed) up.
    - User files from the phone memory
    - User files from a memory card
    - Contacts
    - Calendar
    - Notes
    - Messages
    - Settings
    - Bookmarks
    It saves the backup file in Nokia BackUp format .nbu, which isn't readable either in any text viewer. But at least you can restore all of the said contents back to your phone whenever you need.
    V 05.11
    RM-243
    Nokia 6120C (B21.01)

  • How do i activate Memory card password?

    Hi. I have a nokia 5800 and have set a memory card password, but it never asks me to enter it when i access files! How do i set my phone to ask for a password to access my sensitive files?
    I am using firmware v 21.0.025 which i installed wirelessly from the updates section of my handset.
    Also, is the lock code onlyusable after the phone is idle for a preset period or can i use it to lock certain ares of the phone? the guides are VERY vague...
    Thanks in advance!

    The memory card password is not there to protect your data within the phone, it will only be requested if it is detected that the card has been inserted to a different device (or if your phone is reformated or reflashed).
    The phone autolock is only after a preset period, you can't normally activate it manually. There may be third-party applications that could offer the extra security features that you are looking for, but they are not built into the phone because the typical user doesn't require such a level of protection.
    Message Edited by mccbleue on 04-Jun-2009 08:48 AM

  • How can I replace a 5 in 1 memory card reader in a HP Pavilion 500-027c Desktop PC

    I bought a refurbished HP Pavilion 500-027c Desktop PC computer from walmart 2 weeks ago... The 5-in-1 memory card reader does not work... the device manager says that it is working properly but when I put in a memory card nothing happens... The white light comes on indicating that the memory card has been inserted but the computer does not recognize that anything has been done... I would like to just replace the card reader itself... I see on hp support where it is possible to replace the memory card reader (front I/O), but I don't know where to purchase the actual card reader itself... I don't have any specs on the card reader either.... PLEASE HELP!!!!
    This question was solved.
    View Solution.

    Thanks that page really helped out alot.  And the card is a SDHC memory card.  Now I just need to look into ordering part # 713240-003. How would I go about doing that anyways?
    I bought it refurbished walmart and it had a 14 day warranty... Is there any type of manufacturer warranty?

Maybe you are looking for

  • I can't open links in a new tab after the latest update

    On certain websites where links open automatically in a new tab, such as Gmail etc, the tabs are empty and all of them have this strange address in the address field: jar:file:///C:/Program%20Files/Mozilla%20Firefox/omni.ja!/chrome/browser/content/br

  • How can I use the /home directory

    I'm doing development work on my Mac (running Snow Leopard). The output location for the production server I use is under "/home/subdir". I'd like to develop my files on the Mac so they reside in the same relative location, but from the default insta

  • GR is not posible in an inbound delivery that contains nested HU

    Hi!!! I need your halep!!! I have the next problem in a cross company process:. When the outbound delivery ( that contains nested HU), the good issue is posted, an inbound delivery is created (using a standard workfolw that is used to transfer the ou

  • Staroffice 8 update 6 - unable to open files witten using Mac-Word

    Hi, after installing the product update 6 any attempt to open a file written using Mac-Word in so-writer fails. Is my installation wrong? Or is it a new bug in SO 8? And: Is there a workaround? Trying to open the same files in Openoffice 2.2 works fi

  • CS 5 Selection Tools

    I am considering upgrading from CS3 to CS 5 and the feature I'm most interested in is the new selection tools that can be used to knock out the background.  I have found myself doing this often with photos that have not been taken with this task in m