Memory cleaning help

hi i just whant to ask should i use memory cleaning and how many time a week and is clearing your event log good because it helps to make my blackberry faster 

memory cleaning does not do what most think it does it acts only on empty memory areas wiping them over and over again to get them totally clean it does not function like a PC hard drive defrag for most people memory cleaning slows their system down rather than provide any benifit clearing event logs can be good but how often cannot be stated as "normal" since "normal" depends on the unique circumstances of the individual you must experiement with how frequent works best for you good luck
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Loss of service after memory clean

    I performed a memory clean of my blackberry curv  8520 and now I can't use many of the features on my phone. I can't connect via uma and have searching for network constantly at the top of my screen. I can however connect to orange when I am outside (i can't get a signal in my home).
    I performed a dagnostics test with the following results:
    Radio signal activation: No
    Signal Level: Unknown
    Radio access: unknown
    Network: Unknown
    IP address: unknown
    ICMP ping echo: No
    Blackberry registration: No
    connected to blackberry:no
    Blackberry Pin-Pin: No
    Can anyone help me reactivate my services, I am at a loss and would really apreciate some help.
    Solved!
    Go to Solution.

    You're welcome.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Hi, i have a macbook air, but i want to upgrade to the new model. I want to sell my existing air, but can i wipe the memory clean of all existing content to sell it, but still update my new pc when it arrives?

    Hi, i have an Air but want to upgrade to the new model. How do i wipe the memory clean of my existing Air so i can sell it, and ensure when i get my new PC it automatically assumes the existing settings? Any help appreciated...

    First of all, as a rule you should have two backups before you do anything else. (most don't, and it's up to you).
    I would have one backup done as a Time Machine backup on an external disk, which you will use to import all settings, data and apps to your new MBA via Setup Assistant on your very first boot of the new machine.
    Second, I would have prepared, a bootable backup done via Carbon Copy Cloner or Super Duper on a second external disk. This you can use for unforseen problems that might be evident on the Time Machine backup (hey it happens).
    After you have these two items in preparation, then use the original system disk or flash drive to reformat and reinstall the original operating system to the old machine, cleanly. After that, it is ready for sale. If the unit is not an SSD equipped MBA, you can perform a secure wiping of the disk when you perform the reformatting.
    To reiterate.... You need a good Time Machine Backup as a source for you setting up the new Mac with Setup Assistant.

  • Memory Cleaner causing error when backing up storm?

    So I've recently started using the memory cleaner on my bb storm.  I think it's causing my bb storm not to be able to back up on the desktop mananger.  Has this happened to anyone else or is there a different program I should be using to clean out the memory?
    Solved!
    Go to Solution.

    ofcpa wrote:
    So I restored w/ my last backup and then was able to backup my phone and save it w/ the current date.  I truely believe I get an "error unable to backup" because of the memory cleaner.  It does something so that I'm unable to backup my phone.
    Hi!
    So you believe you get the error with Memory Cleaner active -- have you run controlled tests to validate this? And is the error gone if you run your test with Memory Cleaner inactive?
    Memory Cleaner is belived by most to be not necessary. It is a resource and performance drag on the device for benefits that only fit people with very very high security requirements. Here is a KB that discusses what it does.
    http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB03862&slic...
    The most common misconception about Memory Cleaner is that it performs a defrag of the App Memory and clears out memory leaks and such, returning the BB to a good functioning state. This is incorrect. The best way to accomplish that remains the batt-pop reboot.
    Hope that helps!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Memory Cleaner disabled

    At my company, three of us use BlackBerry Curve 8330s.  We are plugged into a BES running 4.1.6.  I set the memory cleaner on and put an icon out there on all three phones.  On only one of the phones, the Memory Cleaner option is being disabled automatically.  Unfortunately, this is the CEO's phone.  On the other two, the icon is always there. 
    I have gone into the BES and set the profile we use to run Memory Cleaner when holstered.  I thought this would lock Memory Cleaner into an enabled setting.  I did this last week.  This morning, the CEO called and mentioned that the icon is gone again. 
    We are using Verizon's 4.5.0.77 version of the OS on the phones. 
    Any help with this situation would be greatly appreciated!!

    Hi,
    I have this happen to me, whenever I backup or synchronize my curve, it always disables the device. I have
    not found answer of reference to this in any KB's.
    You might check and see if it occurs when using the desktop manager.
    Thanks
    Bifocals
    Please remember to resolve your thread.
    Put the check mark in the green box that contained your answer! Thanks 
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Memory Clean Problem

    i have a blackberry curve and yesterday i stupidly went to memory clean up without really knowing what it was, so i clicked on it and when my phone locked the clean up began, that was at 4 o'clock last night, since then it has been a white screen with the loading clock then occasionally the screen goes dark with red light flashing. does anyone have a clue what to do?
    Thanks 

    Hi and Welcome to the Community!
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Best!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Memory cleaner - Lumia 925

    I need one more help....is there memory cleaner applicable for my lumia 925. Because some time i feel its slow working while long uses...pls revert as fast ad you can...
    Moderator's note: We have provided a subject-related title to help other forum users easily view and respond to this post.

    Hi, N925. Are you referring to your 'Other' storage? Have you tried to delete some unnecessary files on your phone like old messages? How about storage checker app?
    http://www.windowsphone.com/en-us/store/app/storage-check/b4cf45cc-a355-40d2-8b74-51517a042a18
    You may also refer to this thread for other suggestions:
    http://discussions.nokia.com/t5/Nokia-Lumia/WP8-Nokia-Lumia-810-quot-Other-quot-Storage/td-p/1767926
    Note: Although the thread is about another phone, you can still follow the suggestions provided as they are both WP8 devices.

  • BlackBerry Curve Memory Clean Up Problem

     Dear Blackberry Community,
    Recently I bought Blackberry curve in USA - this is a BlackBerry Curve 8520 Smartphone. I live in Switzerland. At the beginning I was able to operate the phone without problems but suddenly, at some point, without any obvious reason I got message "memory clean up". Now, this is all my phone does. It is "cleaning up" the memory. That means screen of the phone is blank and there is only one message on it: "memory clean up" with a small clock. Even when I leave the phone turned on for hrs. nothing happens. Once I left the phone turned on for entire night and next morning I got the same message and the phone with overheated battery.
    Do you know any solutions for this problem? I would be very thankful for any advice.

    So you have tried a battery pull reset I assume?
    If you have not, do so.
    If you have, I would recommend plugging into your computer and doing a backup to ensure your data is saved.
    Now, what exactly were you doing when this came up? do you recall if you had enabled the auto-cleanup?
    1). Please thank those who help you by clicking the beside the 'Reply' button.
    2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
    3). Remember to have fun! We are all in this together!
    4). Follow me on

  • My Ipad is saying it needs to connect to itunes but when i go onto itunes it says it can only be restored but it will delete all my memory. HELP!!

    My Ipad is saying it needs to connect to itunes but when i go onto itunes it says it can only be restored but it will delete all my memory. HELP!!

    No other choice, you have to restore to use your iPad.

  • MBP App Memory Clean showing a total of only 3.38GB RAM, although my MAC should have a total of 4?

    Hello all,
    Perhaps a question more for the tech-experts (I'm not one ) :
    I have been running the (well-known) App Memory Clean for a while, and have been quite satisfied with its "Auto-Clean" function, as it saves me up on the Disk swapping.
    However, as I open the App, there are a few options that can be seen:
    Active
    Wired
    Inactive
    Free
    Used
    Total
    My MBP Retina (late '13) has a 4GB RAM installed- and yet the "Total" RAM memory that Memory Clean displays is a mere 3.41 GB and fluctuating. I have checked Activity Monitor as well as About this Mac>More Info>System Report> Memory, showing me that all slots are "OK".
    Is this an app "bug"? If so, that would be relieving, but nonetheless brings me to a more deep-rooted question:
    Is constantly "cleaning" the RAM bad for it and for the MBP's performance?
    (I have heard that Memory Clean runs by "dumping disk cache"- which is supposedly bad for system performance...?)

    I also have your concerns. I have a first gen rMBP with 16 GB of RAM and I often see every bit of RAM being used!
    So far I’ve been too chicken to upgrade my mid ’11 MBA since it only has 4 GB. I understand Mavericks utilizes RAM differently, but I’m still skeptical. Mavericks hasn’t been as stable as most initial releases so I’m waiting until 10.9 doesn’t seem so much like a beta.
    I’d like to see a good explanation of Mavericks memory management system vs prior versions of the OS. Apple’s quick explanation was ok but far from comprehensive.
    BTW, I switched to FreeMemory when I upgraded to Mavericks. It has all the same functions as Memory Clean but has the added benefit of having a menu bar icon with the familiar pie chart that Activity Monitor once had for a dock icon but lost in the upgrade.
    For now I'll disable the auto clean feature and see how the system behaves, but I'll keep it installed just for it's monitoring capabilities.

  • My mac keeps freezing, i checked my ram fine, checked if SMART was verified it was, i reinstalled my software a few times and my RAM is 8gb used memory clean to make sure it wasnt a RAM probkem and my macbook is still freezing my RAM is 8gb i have

    My mac keeps freezing, i checked my ram fine, checked if SMART was verified it was, i reinstalled my software a few times and my RAM is 8gb used memory clean to make sure it wasnt a RAM probkem and my macbook is still freezing my RAM is 8gb i have 4.50/4.80 gb left and Mid -2012 model Macbook Pro what could be the problem also it started freezong when i upgraded to Yosemite and now my mac freezes once im logged into and sometimes has problem booting up either freezing or agent secuity error black screen??!!!!

    My mac keeps freezing, i checked my ram fine, checked if SMART was verified it was, i reinstalled my software a few times and my RAM is 8gb used memory clean to make sure it wasnt a RAM probkem and my macbook is still freezing my RAM is 8gb i have 4.50/4.80 gb left and Mid -2012 model Macbook Pro what could be the problem also it started freezong when i upgraded to Yosemite and now my mac freezes once im logged into and sometimes has problem booting up either freezing or agent secuity error black screen??!!!!

  • Main Memory Cleaning Policy (Algorithm)

    Respected Sir/Madam,
    I am studying the memory management concepts of Microsoft Windows Operating System.
    I need to know about the Main Memory Cleaning Policies or algorithms of latest Operating systems of Microsoft (Windows 7 and 8) in details.
    What is the threshold level required for the page replacement after remaining the minimum page frames available in main memory ?
    What is the Architecture of the Virtual memory management system of these operating systems?  
    It is Urgent.
    Please send me the answers of these questions.
    I shall be very thankful to you for this.

    Hi ,
     Thanks for the response. Basically I first opened parent panel which is of type Window. It included menu , toolbar etc. For menu/toolbar events it opens child windows which gets displayed in main window in the form of tabs. This is my use case.
    I tried the suggested profiler Redgate Ants profiler. Its very good and informative! I ran the profiler
    got the following output. Though I closed the child window it seems objects are still there in memory . No where I left out string , byte array objects in my code.
    Not sure why Runtimemethodinfo , hastable bucket are there in memory. I even tried the workaround mentioned at here.
    I thought panel resources might have not been freed up and in my code I am clearing them as well. Still did not see much improvement. Any additional things do I need to check? Please let me know.
    Thanks,
    Brahmaji.

  • HT3696 Is this memory cleaner available for windows machines? Where may I find it and or other free windows apps other than at the windows site. Thank You...

    is there somplace that has the mac applications that would work for a windows desktop?

    1.  Why don't you exercise a little self-reliance and do a simple Google search?
    2.  How do you expect anyone to even remotely answer your question since you didn't even meniton what "memory cleaner" you're referring to???

  • Memory: Cleaner Balance/Sec

    I'm new to SSAS and we are receiving warnings from our monitoring software on the Memory: Cleaner Balance/sec. What do I need to review to determine why this performance counter is "out of standard" and how to correct it going forward?
    We are using SSAS 2012, Windows 2012 server,

    This monitor returns the rate of balance+shrink operations. Shows how many times the current memory usage is compared against the settings. Memory usage is checked every 500ms, so the counter will trend towards 2 with slight deviations when the system
    is under high stress. Preferred Value 2

  • Memory clean: 6,48gb in total but my MBP actually has 8gb

    Hi,
    I keep track of my memory because i attempt to understand why my system eats it like it's nothing. Now, i have the app Memory Clean and it shows the following after a cleanup:
    What does it mean? why do i have 6,49gb according to the system?

    OoopsMisclick wrote:
    1gb memory for a game isnt that much. Which means my mac will be worthless if i play a more demanding game for example.
    No, because with any modern memory management system, RAM will be dynamically allocated so that the apps that need it will get it as long as you have a decent amount installed. With 8GB installed, you have a decent amount so you should not worry.
    With Mavericks, memory management is even more sophisticated due to the RAM compression feature. This is causing many veteran Mac users to rethink what "low RAM" means. You cannot simply look at the amounts and say "it's using too much" or "there isn't enough RAM" because you don't really understand that from looking at the numbers. Reading RAM levels does not work like reading a battery meter or a measuring cup.
    With modern RAM management, the most inefficient state is a lot of free RAM, because RAM is so valuable for speeding up things through caching that if apps/OS use little RAM and leave mostly free RAM in a modern OS, they are probably badly programmed from a performance point of view and they are actually wasting RAM if they are not putting it to good use. Also, they are not hogging RAM if they will allow the OS to reallocate if another app starts to need it more.
    That is why so many people in this thread are telling you Memory Clean is not worth using. You are trying to second-guess automatic RAM management and you're not going to do it as well as the system can.

Maybe you are looking for

  • ITunes won't sync app to iPhone 4

    I recently purchased the Batman: Arkham City Lockdown app through the app store on my 15" macbook pro. When I try to sync to my iPhone 4 it just unchecks it in iTunes and doesn't sync. I don't know if it's related to the large file size of the app, o

  • For all those with D-Link routers and problems with iTunes dropping AppleTV

    My setup: Custom built WinXP PC with iTunes 7.6.2. Apple TV w/Take 2. D-link DI-624 wireless N router, wired to the PC, wireless to the aTV. I have an intersting phenomenon occuring with my Apple TV. I can sync the aTV to my PC and it works fine, but

  • Problem installing drivers for on-board Realtek sound

    Using Neo2 I keep getting the following error when Windows XP tries to install the driver: "Cannot Install this Hardware There was a problem installing this hardware: Realtek AC'97 Audio An error occurred during the installation of this device The da

  • Captivate 5.5 player won't open. Not recognizing Flash

    I created a movie in Captivate 5.5, published it and tried clicking on the player file to open and review it. I got this  message. I have Flash 11 installed on my computer.  My files look like this. Any suggestions?  Thanks

  • Install , install again ? That , is the question .

    Upon serious disaffection with rising OS trifles I have taken the time to rein- stall the OS . From the original discs to the retail Tiger distribution to Software Updates three loads and out , I have rein- stalled the OS . The orphaned or unident- i