Memory Error Detected At Startup
After a couple days of frustration, I think I figured out why my mac becomes hung up at the grey screen with the apple in the center everytime I attempt to boot. As a quick summary, I went to upgrade quicktime and after the install, I was prompted to restart and ever since then, I was not able to get the machine to boot up. I was out of my mind fearing the HD and all of my contents went to the grave.
What I learned is that my memory, I think, has gone bad. I ran the hardware test and the message in the test results states that an error was detected at start up with the Memory. It says "2048 S0DIMM0/j25LOWER" as part of the error message...so I am geussing that meand the card in the the second slot crapped out on me. And after reading several threads, it seems pretty consistent with many other complaints who have this model and the same problem with the second memory slot.
Anyways, I also heard my logic board now also be ruined as a result of corrupt memory? Eureka! I haven't gotten that far to know for sure, but I thought I would post this thread to see if what I described has happened to others and what they did to resolve.
I have never opened up a powerbook before and changed / added memory, so I am walking into unknown territory. I was a PC user for many years prior to my powerbook and, unlike the mac, was pretty comfortable tinkering inside a PC. i am okay with jumping inside, but want to make sure I get some inside tips before an even potentially larger disaster!
So, my questions are:
1. Based off of the error message described above, is it the lower slot that is corrupt and do I simply remove the LOWER slot (they are two slots each with 256 mb)
2. If I do that, will it run too too slowly with only 256MB on the first slot that it's not worth using?
3. Should I just buy 1gig of memory and remove both 256 mb's from each slot?
4. Will this incident corrupt my HD??
5. What/where is the best memory card to buy at the most competitve price?
Also, WHY WHY WHY did this happen?? My memory card on my PC lasted forever...what is going on here? This memory was included with the powerbook from the manufacturer.
Hello!HERE is a good place to buy memory. It's unlikely that the MB is damaged and it is possible the ram chip has jarred loose. I'd probably try reseating it and if it still fails to work remove it as they do sometimes go bad. The link above may also have a video on changing the ram if you'll look under the tech tab on the site. 256 MB will be anemic on OSX so you'll likely want to replace the chip if it's indeed bad. Tom
Similar Messages
-
NI Pal Service Manager memory error on pc startup
Hello,
I have two XP-pc's with NI-488.2 (ver. 2.30) and MAX (ver. 4.0.0.3010) installed.
Both pc's give on startup an nipalsm.exe memory error (see attachment).
When starting MAX, (if no error) no installed hardware is shown.
On both pc's also McAfee Virusscan 8.00 is running.
What does nipalsm.exe (internal) that can cause this error ?
With thanks,
best regards,
Geert
Message Edited by GeertVN on 11-03-2005 12:55 AM
Attachments:
nipalsm error on pc loading.jpg 25 KB
nipalsm.exe info.gif 34 KBHi,
I have some suggestions for you:
Try the latest driver, version 2.4:
http://digital.ni.com/softlib.nsf/websearch/1DDE5C48F30C2C658625702000681295?opendocument&node=132060_US
---> Don't install the new driver over the other one. First remove the old one.
Are you testing the same GPIB card in both PCs? If yes, does the error occur without any cards plugged-in?
Try a Repair of MAX in Add/Remove programs
Make sure that you install first the driver without the card plugged-in.
Check if no firewall is blocking the nipalsm.exe. Maybe you can check if the error occurs when you have no McAfee software installed. (I don't think that the problem is caused by the MCAfee soft but I haven't tested it yet with the latest version)
Regards.
JV -
How to handle memory error in /var/adm/messages...
Hi,
I am getting the following error messages often in our
systems. Any one of you elabrate what was the problem.
SUNW,UltraSPARC-II: [ID 470261 kern.info] [AFT0]
Corrected Memory Error detected by CPU3, errID
0x0005a0b0.c96402a9
AFSR 0x00000000.00100000<CE> AFAR 0x00000000.a92fd160
AFSR.PSYND 0x0000(Score 05) AFSR.ETS 0x00
Fault_PC0x10025280
UDBH Syndrome 0x1f Memory Module U0402
SUNW,UltraSPARC-II: [ID 394986 kern.info] [AFT0]
errID0x0005a0b0.c96402a9 Corrected Memory Error on
U0402 is Persistent
SUNW,UltraSPARC-II: [ID 396483 kern.info] [AFT0]
errID0x0005a0b0.c96402a9 ECC Data Bit 44 was in error
and corrected
ThanksIt looks like one of your memory modules may need to be replaced. You should probably send the log info to your support contractor for detailed analysis.
-R -
New Mac Pro - Errors detected on memory module
My system:
Mac Pro (Late 2013)
3,5 GHz 6-Core Intel Xeon E5
16 GB 1866 MHz DDR3 ECC
AMD FirePro D500 3072 MB
250G SSD Internal
OSX Yosemite 10.10.1
Problem:
During the hard editing in Final Cut or work in Motion I feel like my mac starts to slow down.
Especially during sharing video to h264 format. Mac starts very slowly rendering.
After the first failure in the system, I found this errors:
first error occurs in one module, then after 15-20 min. in all modules
Is this a hardware problem?
If not a hardware problem, is there some well understood fix for this?
Sorry for my English.
Thank you!Use About This Mac > ( More Info ) > ( Report ) > Memory
You may see that the Error detection-and-correction Hardware has found (and corrected) errors in some of your modules, as seen in this report:
graphic courtesy anandtech.com
Modules that are giving errors are Bad. This is a Hardware Problem, but check to be sure the fan is running. If it gets a little bit worse, a Double-bit (uncorrectable) Error will occur, and you Mac Pro will halt on a kernel panic, machine check, uncorrected error or error overflow, detected by multiple processors at once. This is by design, to keep memory errors from poisoning your data. -
Photoshop CS6 has out of memory errors under Mac OS X 10.7.4
Has anyone who has a 2008 MacBoo Pro with the NVIDIA GeForce 8600M GT 512 MB graphics card tried running Photoshop CS6 under Mac OS X 10.7.4?
On my MacBook Pro, PS CS6 launches; however, any action results in an out of memory error. The CS6 versions of After Effects, Premiere Pro and Illustrator all launch and run as expected under 10.7.4.
If I switch to my Mac OS X 10.6.8 startup volume, Photoshop CS6 runs as expected.
I have support cases open with Adobe, NVidia and Apple. Adobe thinks I need to update the display drivers. NVidia says display drivers must be provided by Apple. Apple says that the display drivers are current. The Apple support agent said that he can escalate the case if the issue can be reproduced on more than one computer.
I'd love to keep my MacBook Pro running another year or so without having to reboot in 10.6.8 every time I need to use Photoshop. I'd stay with 10.6.8, but of course iCloud requires 10.7.4.
I have not tried 10.8 yet, but it's on my troubleshooting list.
Also, PS CS6 runs fine under Mac OS X 10.7.4 on my 2010 iMac.
Thanks in advance for any feedback.
- WarrenIt looks like it was indeed the display driver for the NVIDIA GeForce 8600 GT 512 MB graphics card inside my 2008 MacBook Pro.
It seems that this driver only gets installed if you upgrade from Mac OS X 10.6.7 to 10.7.4 while the startup drive is connected to the MacBook Pro itself. I had updated while the startup drive was connected to my 2010 iMac. Accordingly, I could have reinstalled Photoshop 100 times without it ever launching as expected. Having used the external startup drive with three other Apple computers (all 2010 or newer machines) with Photoshop CS6 launching as expected, I had just assumed (mistakenly) that it would work as expected with my 2008 computer.
So, this was simple enough to resolve by upgrading the OS on the external startup drive while having it connected to the MacBook Pro. In hindsight, this makes perfect sense.
-Warren -
I am getting a lot of "memory" errors lately. I thought it was mostly limited to my 2004 Microsoft office suite – mostly Entourage – (yeah, I know, but my company hates to spend money on anything let alone upgrades to the current decade) running on my brand new Mac Pro with a ton of memory.
Today, though, I got a "not enough memory/cannot save" error in my newly upgraded FlexiPro 8.5 software. This error message is new.
Add it to the Entourage and Powerpoint problems, the fact that Adobe CS2 has its own issues, and it becomes an incredibly frustrating way to work.
Yesterday, I ran Disk Utility and it told me to startup from the installation disk and then repair. I repaired my hard drive with Disk Utility, started up from the system installation disk. It claimed to have repaired the problem it was having then. But... I am not getting any relief from the seemingly random error messages today.
2.8 GHz Quad-Core Intel Zeon
3 GB 1066 MHz DDR3
1TB hard drive
OS 10.6.7
Anyone???Well, 3GB of memory is almost enough to boot and run a program, but other than that, anemia and starvation.
Memory for Mac Pro
Westmere-MemoryBandwidth
Mac Pro Memory 1333
How Much Memory Nehalem Mac Pro
Reading system memory usage
As for errors, you are talking about parity or other errors, System Profile: Memory, then run AHT and Rember.
Depending on what you do and run, even 6-8GB RAM should be absolutely minimum, with 16-32GB, and for CS 5.x 24GB.
Older applications one problem is they have to emulate PowerPC code via Rosetta which eats up 2GB or more of overhead. Throw in Safari which is a memory hog and some others.
Take a look at /var/vm and the pageouts and swap files from Activity Monitor, though having zero pageouts or low is not a pure indication of having 'enough' for performance. -
Out of Memory Error - JBOSS - JRocket
I continue to see my jrocket/jboss/linux servers crash daily in production for out of memory errors. When we trace back the stack to find a query that does not appear to have nearly enough data to bring the server to an out of memory state. Heap useage pattern does not indicate any leak in the application.
Using RedHat Linux ES - rel. 4 - Nahant Update 4
startup with 1536m Xms/x
Any thoughts or previous expereince. This is a Java application servicing a Flex UICheck your Linux kernel version.
If you have an unpatched Linux kernel, which is not compliant, you will see these errors for all Jrocket.
The 2,6,9-5 kernel is not compliant without patches, see:
http://e-docs.bea.com/jrockit/jrdocs/suppPlat/prodsupp.html#wp999048
excerpt
The JRockit JDK is supported on the default Linux kernel, which varies with the distribution and architecture. See the Notes field in the Summary of Supported Configurations by Release for details. If you require a different kernel, such as the hugemem kernel, contact Oracle Support for current support status.
Also, see references to x_86 64bit?
http://jira.jboss.org/jira/browse/JBPAPP-158
This is a 32bit ES - rel 4 correct?
This link also shows a fairly excellent step by step Out of Memory Troubleshooting session. -
Why do I get a Track out of memory error while running open loop frequency response?
MatrixX Build 61mx1411: I get a "Track out of memory" error when I run the Open Loop Frequency Response from the MatrixX pull down tools. What can I do to prevent this? We are running on an HP B1000 with 768 MB of RAM under HP-UX 10.2.
In the old days of Mx say Version 5 and prior the user actually selected the amount of memory that would be allocated. Depending on the size of the model etc. you would have to allocate memory. In version 6.0 and going forward there is no need for the user to manually allocate the memory.
Build {rstack=50000,istack=200000,sstack=50000,cstack=500 000}
If this is a command in a script file that you are running and the error is resulting from that then I would try commenting out everything after the letter d in the word build and then starting it back up.
i.e. only use Build
I don't believe that there is a way to manually allocate the initial SystemBuild Stack size.
I believe initially the stack size is set to 10010.
However, one way
you can manually set the initial SystemBuild stack size,is to create a large StateSpace as soon as you start up SystemBuild. This will prevent piece-meal reallocs while using SystemBuild.
You can created a new SuperBlock in SystemBuild and then drop down a StateSpace Block with 199 inputs and 199 Outputs and 1 State and entered ones(200,200)as the StateSpace Matrix without any problems. This would resize this internal stack to at least 40000.
You really should not have to do this but if that helps then you might think about doing this in your startup.ms file you could use SBA or load the file then you could delete the superblock and begin working.
"Bob" gave me this little tid bit.
Please let me know if any of this is of use.
Garrett
Garrett Thurston
[email protected]
Phone: 781.993.5540 -
Error detected while attempting to run job
Hi everyone,
One of my users tried to run a rule in Hyperion Planning 11.1.1.3 and an error occurred: Error detected while attempting to run job
When I went to Essbase, I found that when I launched the rule an error appeared:
ERROR - 1006059 - Invalid block header: Illegal block type -- Please use the IBH Locate/Fix utilities to find/fix the IBH problem.
I read that it could be an issue related to corrupted blocks. I'm not familiar with MXL and I read that there are commands that I could run. Someody could provide me help?
Regards,I have XCP files:
----- Exception Error Log Begin -----
Current Date & Time: Thu Nov 07 13:31:38 2013
Process Type: Application
Application Name: HYPCOLAN
Database Name: COSTS
Exception Log File: c:\Hyperion\logs\essbase\app\HYPCOLAN\COSTS\log00001.xcp
Current Thread Id: 5940
Exception Code: 0xC0000005=Access Violation
Exception Flags: 0x00000000=Continuable
Exception Address: 0x603B569F
Exception Parameters: 2
Exception Parameter 0: 0x00000001=Write Violation
Exception Parameter 1: 0x57970000 (Virtual Address)
----- Machine Registers -----
General Registers:
EAX=0x795D0E18 EBX=0x5796FFF8 ECX=0x57970038
EDX=0x0DC0F6CC ESI=0x00000048 EDI=0xFD320000
Control Registers:
CS =0x0000001B EIP=0x603B569F Flg=0x00010283
SS =0x00000023 ESP=0x024ACBB0 EBP=0x024ACBCC
Segment Registers:
DS =0x00000023 ES =0x00000023 FS =0x0000003B
GS =0x00000000
Floating Point Registers:
CWD=0xFFFF027F SWD=0xFFFF3920 TWD=0xFFFF3FFF
EOF=0x603B5699 ESL=0x0505001B DOF=0x603E9B50
DSL=0xFFFF0023 CRS=0x00000000
Register Area (Hex):
00 B0 B0 3A F7 7C 1D 90 CE BF
00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00
00 00 00 00 FC 09 A0 95 26 40
00 00 C0 C6 B2 2C 7B 91 28 40
Debug Registers:
DR0=0x00000000 DR1=0x00000000 DR2=0x00000000
DR3=0x00000000 DR6=0x00000000 DR7=0x00000000
----- Stack -----
Stack Trace:
0: 0x603b569f ESSSVRD@adReqCurrencyTransBegin + 0x9c22f 0x00000000010cf0a4 0x000000000dc0f6cc 0x000000000dc0f378 0x000000004a25db00
1: 0x603b6ba8 ESSSVRD@adReqCurrencyTransBegin + 0x9d738 0x00000000010cf0a4 0x000000000032af01 0x0000000000000004 0x000000000000198a
2: 0x603bb76b ESSSVRD@adReqCurrencyTransBegin + 0xa22fb 0x00000000010cf0a4 0x000000004a25db00 0x000000000dc0f330 0x000000000da45d00
3: 0x603bc2d1 ESSSVRD@adReqCurrencyTransBegin + 0xa2e61 0x00000000000003a8 0x00000000010cf0a4 0x000000004a25db00 0x00000000214e006c
4: 0x603bc441 ESSSVRD@adReqCurrencyTransBegin + 0xa2fd1 0x000000004a25db00 0x00000000024ad2a8 0x00000000010cf0a4 0x0000000000000000
5: 0x603bf614 ESSSVRD@adReqCurrencyTransBegin + 0xa61a4 0x00000000010cf0a4 0x000000000025db00 0x0000000000000000 0x00000000010cf0a4
6: 0x6037dc5f ESSSVRD@adReqCurrencyTransBegin + 0x647ef 0x0000000000000002 0x0000000000000000 0x00000000010cf0a4 0x00000000024ad2a8
7: 0x6037e28d ESSSVRD@adReqCurrencyTransBegin + 0x64e1d 0x00000000010cf0a4 0x00000000024ad2a8 0x0000000000000002 0x0000000000000000
8: 0x60376993 ESSSVRD@adReqCurrencyTransBegin + 0x5d523 0x000000000013003a 0x0000000000000000 0x00000000010cf0a4 0x00000000004ad200
9: 0x601c902e ESSSVRD@adCSCRConvFixMbrFromBitMap + 0x1115e 0x000000000000012c 0x00000000596ea148 0x0000000000000000 0x00000000024ad40c
10: 0x601af5d2 ESSSVRD@adOdomInc + 0x3172 0x00000000010cf0a4 0x00000000010cc462 0x000000000dc99940 0x000000000dc48fd8
11: 0x601af718 ESSSVRD@adOdomInc + 0x32b8 0x00000000010cf0a4 0x00000000010cc462 0x00000000588edfd8 0x0000000000000000
12: 0x601b02c5 ESSSVRD@adOdomInc + 0x3e65 0x00000000010cf0a4 0x000000000dc2d540 0x00000000010cf0a4 0x00000000604d283d
13: 0x6032eb72 ESSSVRD@adReqCurrencyTransBegin + 0x15702 0x00000000010cf0a4 0x000000000dc6a0a4 0x000000000dc6a008 0x00000000024af660
14: 0x6032db25 ESSSVRD@adReqCurrencyTransBegin + 0x146b5 0x000000000dc6a0a4 0x000000000dc6a008 0x00000000024af660 0x00000000604cfbba
15: 0x603320d8 ESSSVRD@adReqCurrencyTransBegin + 0x18c68 0x00000000010cf0a4 0x000000000000000d 0x00000000024af660 0x0000000000004650
16: 0x602ed5ac ESSSVRD@adThreadRegister + 0x467c 0x00000000010cf0a4 0x0000000000004650 0x0000000000000000 0x0000000000000000
17: 0x602eec17 ESSSVRD@adThreadRegister + 0x5ce7 0x00000000000cf0a4 0x0000000000000000 0x0000000000000000 0x00000000010cf0a4
18: 0x77e6481f kernel32@GetModuleHandleA + 0xdf 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
----- Application-Wide Configuration -----
Server Name:
Application Name: HYPCOLAN
Elapsed App Time: 00:21:23:39
Module Count: 16
Module 0: 0x00401000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSVR.EXE
Module 1: 0x60001000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSVRD.DLL
Module 2: 0x60B31000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSASOSM.DLL
Module 3: 0x60CA1000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSRPM.DLL
Module 4: 0x60DC1000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSAPINU.DLL
Module 5: 0x60E91000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOTLSU.DLL
Module 6: 0x60F41000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOTLNU.DLL
Module 7: 0x60F81000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSMTDNU.DLL
Module 8: 0x61031000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOPGN.DLL
Module 9: 0x61061000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSHRU.DLL
Module 10: 0x61135430 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSUTLU.DLL
Module 11: 0x61151000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSDU.DLL
Module 12: 0x61171000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSGLOBU.DLL
Module 13: 0x61181000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSECU.DLL
Module 14: 0x61191000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOBJIO.DLL
Module 15: 0x611A1000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSDVRQ.DLL
----- Operating System Resources -----
System Date & Time: Thu Nov 07 13:31:39 2013
Elapsed OS Time: 13:21:34:36
OS Name & Version: Windows NT 5.02
CPU Count: 16
CPU Type: Pentium
Correct System Memory information currently not available
Swap Flags:
Enabled: Y
Disabled: N
File Found: Y
Denied: N
Swap file(s): c:\pagefile.sys
Correct Swap Space information currently not available
Total Drives: 6
Current Drive: 3
Drive 3:
Drive Name: C
Volume Label: Local Disk
Drive Type: Fixed
File System: NTFS
Total Drive Space: 142689329 KB
Free Drive Space: 71187620 KB
Used Drive Space: 71501709 KB
Drive 4:
Drive Name: D
Volume Label: Drive_D
Drive Type: Fixed
File System: NTFS
Total Drive Space: 292415096 KB
Free Drive Space: 18586252 KB
Used Drive Space: 273828844 KB
Drive 5:
Drive Name: E
Volume Label:
Drive Type: Unknown
File System: Unknown
Total Drive Space: 0 KB
Free Drive Space: 0 KB
Used Drive Space: 0 KB
Drive 6:
Drive Name: F
Volume Label:
Drive Type: Unknown
File System: Unknown
Total Drive Space: 0 KB
Free Drive Space: 0 KB
Used Drive Space: 0 KB
Drive 7:
Drive Name: G
Volume Label:
Drive Type: Unknown
File System: Unknown
Total Drive Space: 0 KB
Free Drive Space: 0 KB
Used Drive Space: 0 KB
Drive 21:
Drive Name: U
Volume Label:
Drive Type: Unknown
File System: Unknown
Total Drive Space: 0 KB
Free Drive Space: 0 KB
Used Drive Space: 0 KB
----- System-Wide Configuration -----
Elapsed Essbase Time: 00:21:23:39
Essbase Version: 11.1.1
Essbase Description: ESB11.1.1.3.0B126
Network Type: Windows Sockets
Environment Variable: ARBORPATH = c:\Hyperion\products\Essbase\EssbaseServer
Environment Variable: ARBORMSGPATH = c:\Hyperion\products\Essbase\EssbaseServer\bin
Module Count: 16
Module 0:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSDU.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 1:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSGLOBU.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 2:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSUTLU.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 3:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSECU.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 4:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOBJIO.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 5:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOPGN.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 6:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOTLSU.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 7:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSHRU.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 8:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSAPINU.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 9:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOTLNU.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 10:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSRPM.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 11:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSMTDNU.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 12:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSASOSM.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 13:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSDVRQ.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 14:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSVRD.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 15:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSVR.EXE
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
----- ESSBASE.CFG Configuration Values -----
Configuration Value: JvmModuleLocation = c:\Hyperion\common\JRE\Sun\1.5.0\bin\client\jvm.dll
Configuration Value: AuthenticationModule = CSS
Configuration Value: PORTINC = 3
Configuration Value: DataErrorLimit = 65000
Configuration Value: CalcCacheHigh = 1100000000
Configuration Value: CalcCacheDefault = 500000000
Configuration Value: CalcCacheLow = 30000000
Configuration Value: CalcLockBlockHigh = 4000000
Configuration Value: CalcLockBlockDefault = 900000
Configuration Value: CalcLockBlockLow = 400000
Configuration Value: UpdateCalc = False
Configuration Value: NetDelay = 3000
Configuration Value: NetRetryCount = 1000
Configuration Value: MultipleBitmapMemCheck = True
Configuration Value: ParCalcMultipleBitmapMemOpt = True
Configuration Value: DYNCALCCACHEWAITFORBLK = TRUE
Configuration Value: DYNCALCCACHEBLKRELEASE = TRUE
Configuration Value: DYNCALCCACHEMAXSIZE = 600M
Configuration Value: DYNCALCCACHECOMPRBLKBUFSIZE = 400M
Configuration Value: CalcLimitFormulaRecursion = TRUE;
Configuration Value: AGENTPORT = 1423
Configuration Value: SERVERPORTBEGIN = 32768
Configuration Value: SERVERPORTEND = 33768
Configuration Value: AGENTDESC = hypservice_1
----- Client Request Activity -----
Server Name:
Application Name: HYPCOLAN
Total Request Threads: 20
Avail Request Threads: 19
Total Requests: 220
Average Requests: 111.000000
Weighted Average: 0.007431
Statistics Per Minute:
Current Requests: 0
Minimum Requests: 0.000000
Maximum Requests: 111.000000
Thread Count: 20
Thread Id 3324:
Request Name: GetAttributeNameSpecs
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 4060:
Request Name: GetMbrInfo
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 1692:
Request Name: OtlQueryAttrib
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 736:
Request Name: OtlQueryAttrib
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 5288:
Request Name: OtlQueryAttrib
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 784:
Request Name: OtlQueryMbrs
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 220:
Request Name: GetSelectedMbrInfo
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 4356:
Request Name: OtlQueryAttrib
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 6100:
Request Name: OtlQueryAttrib
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 5944:
Request Name: OtlQueryAttrib
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 4880:
Request Name: OtlQueryAttrib
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 1128:
Request Name: OtlQueryMbrs
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 5728:
Request Name: OtlQueryAttrib
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 5960:
Request Name: OtlQueryAttrib
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 1208:
Request Name: GetOtlUMC
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 5240:
Request Name: OtlQueryAttrib
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 1768:
Request Name: OtlQueryAttrib
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 3648:
Request Name: OtlQueryAttrib
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 1736:
Request Name: GetOtlInfo
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 5940:
Request Name: MaxL: Execute
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:38 2013
End Time: Pending
----- Exception Error Log End ----- -
Cat c6509 E with Supervisor vs-s720-10g reload and Cache error detected!
Can you help me Cat c6509-E reload
connect console I see :
Initializing ATA monitor library...
Self extracting the image... [OK]
Self decompressing the image : ############################# [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, s72033_sp Software (s72033_sp-IPBASEK9-M), Version 12.2(33)SXI1, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Sat 28-Mar-09 10:48 by prod_rel_team
Image text-base: 0x40101328, data-base: 0x421FFA10
Cache error detected!
CPO_ECC (reg 26/0): 0x000000B6
CPO_CACHERI (reg 27/0): 0x84000000
CP0_CAUSE (reg 13/0): 0x00004800
Real cache error detected. System will be halted.
Error: Primary data cache, fields: , 1st dword
Actual physical addr 0x00000000,
virtual address is imprecise.
Imprecise Data Parity Error
Imprecise Data Parity Error
22:12:30 UTC Tue Mar 24 2015: Interrupt exception, CPU signal 20, PC = 0x413EB310
Possible software fault. Upon reccurence, please collect
crashinfo, "show tech" and contact Cisco Technical Support.
-Traceback= 414EDA90
$0 : 00000000, AT : 42510000, v0 : 00000000, v1 : 00000001
a0 : 43757CC4, a1 : 00040110, a2 : 45762ECE, a3 : 00000000
t0 : 44997CF0, t1 : 00000000, t2 : D5303A40, t3 : 00003A40
t4 : 0000004F, t5 : 0000005F, t6 : 68C8F600, t7 : 00000000
s0 : BEDA4010, s1 : 00000000, s2 : 00000000, s3 : 44086D60
s4 : 45762ECC, s5 : 00000001, s6 : 00000080, s7 : 44080000
t8 : 45762ECC, t9 : 00000000, k0 : 841E6970, k1 : 02951800
gp : 4250FC60, sp : 44997D48, s8 : 4499848E, ra : 413EB310
EPC : 414EDA90, ErrorEPC : 413EB310, SREG : 3400F105
MDLO : 00159DC0, MDHI : 00000000, BadVaddr : 00000000
DATA_START : 0x421FFA10
Cause 00004800 (Code 0x0): Interrupt exception
File bootflash:crashinfo_20150324-221230 Device Error :No such device
%Software-forced reload
22:12:30 UTC Tue Mar 24 2015: Breakpoint exception, CPU signal 23, PC = 0x4171F5E0
Possible software fault. Upon reccurence, please collect
crashinfo, "show tech" and contact Cisco Technical Support.
-Traceback= 4171F5E0 4171D184 40F4F26C 40F4F450 40F4F670 4171282C
$0 : 00000000, AT : 42510000, v0 : 441D0000, v1 : 424C0000
a0 : 00000000, a1 : 00008100, a2 : 00000000, a3 : 00000000
t0 : 0000FF00, t1 : 3401FF01, t2 : 41712918, t3 : FFFF00FF
t4 : 41712918, t5 : 73206265, t6 : 65746563, t7 : 20546865
s0 : 00000000, s1 : 424C0000, s2 : 00000000, s3 : 08000000
s4 : 42380000, s5 : 42380000, s6 : 41D90000, s7 : 00000001
t8 : 506D5CC4, t9 : 00000000, k0 : 00000000, k1 : 00000000
gp : 4250FC60, sp : 50012420, s8 : 41D90000, ra : 4171D184
EPC : 4171F5E0, ErrorEPC : 413EB310, SREG : 3401FF03
MDLO : 00000000, MDHI : 00000003, BadVaddr : 00000000
DATA_START : 0x421FFA10
Cause 00000024 (Code 0x9): Breakpoint exception
=== Flushing messages (22:12:30 UTC Tue Mar 24 2015) ===
Buffered messages:
Queued messages:
*Mar 24 22:12:30.695: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
Firmware compiled 19-Feb-09 20:18 by weizhan Build [100]
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: Error address Lo=0x4010
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: Error address Hi=0x1EDA
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: Interrupt Hi reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: Interrupt lo reg=0x8000000
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-DUMP: System controller Global Registers Dump
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: global hazard reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: soft reset cfg reg=0x10FFFF
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: global cfg reg=0x20
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: init status reg=0x8
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: ibl cfg reg=0xE
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: prio map cfg reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: ecc error log reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: parity error log reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: jtag idcode reg=0x5013102F
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: work status reg hi=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: work status reg lo=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: eobc rxstat reg=0x11FE
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: eobc txstat reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: eobc mac cfg reg=0xE24
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: inbound rxstat reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: inbound txstat reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: io int stat reg=0x408
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: pcmcia cfg reg=0x1A0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: pcmcia stat reg=0x3C
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: bist go stat reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: bist done stat reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: ibl debug reg 0=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: ibl debug reg 1=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: ibl debug reg 2=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: obl debug reg 0=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: obl debug reg 1=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: rxq debug reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: txq debug reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: gigmac cfg reg=0x1001
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: gigmac stat reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-FATAL: An unrecoverable error has been detected. The system is being reset.
*Mar 24 22:12:30.695: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
*Mar 24 22:12:30.695: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
*Mar 24 22:12:30.695: %OIR-6-CONSOLE: Changing console ownership to switch processor
*** System received a Cache Parity Exception ***
signal= 0x14, code= 0x84000000, context= 0x441ce024
PC = 0x4171295c, Cause = 0x820, Status Reg = 0x34018002
System Bootstrap, Version 8.5(3)
Copyright (c) 1994-2008 by cisco Systems, Inc.
Cat6k-Sup720/SP processor with 1048576 Kbytes of main memory
Autoboot: failed, BOOT string is empty
Autoboot executing command: "boot "Hello Abubaker,
It crashed due to a parity error.
Imprecise Data Parity Error
Imprecise Data Parity Error
Which in other words means, a temporary error in memory. On single occurence adivice is to monitor the supervisor for re-occurence of such failure again. You can monitor it for 24 - 48 hours and if its a hard failure , the likelyhood of issue coming again is more and you need to replace supervisor. If it does not repeat you can consider this as a one time issue and contnue using it.
Hope this helps and please always rate useful posts.
Thanks,
Madhu -
Out of Memory error while builng HTML String from a Large HashMap.
Hi,
I am building an HTML string from a large map oject that consits of about 32000 objects using the Transformer class in java. As this HTML string needs to be displayed in the JSP page, the reponse time was too high and also some times it is throwing out of memory error.
Please let me know how i can implement the concept of building the library tree(folder structure) HTML string for the first set of say 1000 entries and then display in the web page and then detect an onScroll event and handle it in java Script functions and come back and build the tree for the next set of entries in the map and append this string to the previous one and accordingly display it.
please let me know whether
1. the suggested solution was the advisable one.
2. how to build tree(HTML String) for a set of entries in the map while iterating over the map.
3. How to detect a onScroll event and handle it.
Note : Handling the events in the JavaScript functions and displaying the tree is now being done using AJAX.
Thanks for help in Advance,
KartheekHi
Sorry,
I haven't seen any error in the browser as this may be Out of memory error which was not handled. I got the the following error from the web logic console
org.apache.struts.actions.DispatchAction">Dispatch[serviceCenterHome] to method 'getUserLibraryTree' returned an exceptionjava.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:276)
at org.apache.struts.actions.DispatchAction.execute(DispatchAction.java:196)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:421)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:226)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1164)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:415)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:996)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6452)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3661)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2630)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.lang.OutOfMemoryError
</L_MSG>
<L_MSG MN="ILHD-1109" PID="adminserver" TID="ExecuteThread: '14' for queue: 'weblogic.kernel.Default'" DT="2012/04/18 7:56:17:146" PT="WARN" AP="" DN="" SN="" SR="org.apache.struts.action.RequestProcessor">Unhandled Exception thrown: class javax.servlet.ServletException</L_MSG>
<Apr 18, 2012 7:56:17 AM CDT> <Error> <HTTP> <BEA-101017> <[ServletContext(id=26367546,name=fcsi,context-path=/fcsi)] Root cause of ServletException.
*java.lang.OutOfMemoryError*
Please Advise.
Thanks for your help in advance,
Kartheek -
Oracle 9.2 and memory leak detection
Hi All.
I have found the following error in trace file
after shutdown database.
=================================================================
/.../udump/cpaw_ora_4427.trc
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, Oracle Label Security, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
ORACLE_HOME = /.../product/9.2.0
System name: Linux
Node name: host.com
Release: 2.4.18-10bigmem
Version: #1 SMP Wed Aug 7 10:26:52 EDT 2002
Machine: i686
Instance name: orcl
Redo thread mounted by this instance: 0 <none>
Oracle process number: 10
Unix process pid: 4427, image: [email protected] (TNS V1-V3)
*** SESSION ID:(9.3) 2002-10-10 14:17:14.265
Archiving is disabled
Archiving is disabled
******** ERROR: SGA memory leak detected 16 ********
KGH Latch Directory Information
ldir state: 2 next slot: 39
Slot [ 1] Latch: 0x50005be8 Index: 1 Flags: 3 State: 2 next: (nil)
<...>
=====================================================================
Linux RedHat 7.3 (db works in archivelog mode).
How can I correct this?
Thanks in advance.
Best regards,
Andrey Demchenko.Thanks for the answers. The oci8.dll is uncommented naturally. Otherwise it would start up just fine, but I couldn't use the database functions.
I got it working by installing 5.1.6, but replacing the oci8.dll with the one from the 5.1.0 -version. It's a very... desperate... solution, but at least it works.
I'm gonna have to try to sell the idea of using the 10g client to our DBA. I don't think though, that he'll be very enthusiastic to set it up on our production servers. We'll see. -
Weblogic 6.1 deployment out of memory error - please help
I am getting an out of memory error when deploying an ear to a weblogic 6.1 server. I tried increasing heap size with the startup param. I also tried upgrading the jdk to 1.3.1_02. Here is how I am starting weblogic -
"%JAVA_HOME%\bin\java" -hotspot -XX:MaxPermSize=256m -ms64m -mx64m -classpath "%CLASSPATH%" -Dweblogic.Domain=mydomain -Dweblogic.management.discover=false -Dweblogic.Name=myserver "-Dbea.home=C:\bea" -Dweblogic.management.password=%WLS_PW% -Dweblogic.ProductionModeEnabled=%STARTMODE% "-Djava.security.policy==C:\bea\wlserver6.1/lib/weblogic.policy" weblogic.Server
I tried 64, 128, and 256 for the MaxPermSize param and the larger I make this number, the longer the deploy takes. I also tried lowering the session timeout to 1 min from 30. Now, when I deploy to the weblogic connection, jdev writes the war, then hangs. The rest of my desktop is slow but responsive, but I let jdev go for up to 1hr when running this deploy, and it never even starts the weblogic.deploy call. I end up killing it. This ear is not very big and is a simple servlet.
Any thoughts?repost
-
Hi all,
I using Database version 9.0.2.1 on Windows.
In Udump\.....trace file have a message:
*** 2004-04-11 13:28:58.000
*** SESSION ID:(4.1) 2004-04-11 13:28:57.000
******** ERROR: PGA memory leak detected 10340 > 6004 ********
HEAP DUMP heap name="pga heap" desc=001CDF10 ....
and then about 1-2 hours, my database is down (not connect) (error: ORA=3113: end of file communicational...)
I think, cause is PGA memory too large, may be ? I set value of PGA = 80-100 MB.
My server has 1.5GB RAM, (SGA = 900, Shared Mem=500, Buffer mem= 150..). It's correct ?
Please help me to resolve this problem.!!!!!
Thanks
[email protected]Hi ER,
It seems that you need to Update Patch - 9.2.0.6 which will solve this PGA Memory Leak!
Check this Doc ID: Note:283897.1 in Metalink!
Ravi Prakash -
Hi all,
I am getting the following error in the database alert log.
ORA-00600: internal error code, arguments: [729], [2216], [space leak], [], [], [], [], []
when checked the trace file in which the details are dumped. The error line says
*** 2004-01-07 18:09:00.002
*** SESSION ID:(123.21632) 2004-01-07 18:08:59.981
******** ERROR: UGA memory leak detected 2216 ********
HEAP DUMP heap name="session heap" desc=0x80000001000b10f0
extent sz=0x10a8 alt=32767 het=32767 rec=0 flg=3 opc=3
parent=8000000100007450 owner=c00000003785c750 nex=0 xsz=0x4098
EXTENT 0
Can anyone help me in this issue.
Thanks in advance.
Regards
ShoyebGenerally error ORA-00600 is very complex to understand and in almost all cases that error is tried with Oracle Support. http://metalink.oracle.com . You have to have an account to open an iTAR and so on.
Joel P�rez
Maybe you are looking for
-
[SOLVED] awesome WM bug since xorg 1.16
Has anyone had any strange behavior with awesome since updating xorg-server to 1.16? Since that upgrade, when switching between two tags which both have at least 1 window, the original tag will stay highlighted, and the "taskbar" will not change. My
-
My mirroring icon is no longer showing up on my iPad. Where did it go?
Where did the mirroring icon go on my iPad? I can't find it.
-
How to get soap request in webservices (WSDL in java)
hi ,, i did one helloworld app using soap protocol. In that , one soap client invokes the webservices(old java class with WSDL ).Now i want to get the soap document in the web service for to process the soap envelope and parsing and generating the o/
-
Improve the order-to-cash cycle and DSO with e-invoicing
Hi Gurus Please will you provide me with material or ducumentation in this area- Improve the order-to-cash cycle and DSO with e-invoicing. Thanks in advance Rash
-
Ipad2 problem syncing tv shows with itunes
I have been having a problem resently syncing tv shows I have purchase on itues with my ipad2.