Memory Error Neo2 Pt 4*512 DDR 400 or even 333

Ok, this board has started giving me a lot of problems. 1 week ago all was fine, and suddenly I started getting BSODs. Last friday the computer shut off after a BSOD, while I was just browsing the internet.
Affter that it failed to start and gave a BSOD on every boot.
Then it started automatically again. And woked well.
On sat the system wont start and gave long beeps, indiicating memory error.
4*512 Ballistix default spd.
so I reset my BIOS, upgraded bios to 1.A ballistix edition, as syar suggested.
Computer ran well / rebooted well.
but when I did a cold start sunday morning I got long beeps again. Even resetting the BIOS did help. Got long beeps.
I took 1 module out and the system started well. went into the bios and manually set bus to 333 rather than 400, default spd timings.
Computer started well. I put the 4th module back in, and all worked well till I did a cold boot today, and back to continuos beeps.
Now the only way the computer works if I just use 2 memory modules.
I tried manual voltage, manual timings, spd timings, timings on crucial's site, voltage on crucials site. No luck.
currently i am on 2*512 dimm 1-2, default spd and voltage and system seems to work.
whats the prob ? Is my memory bad, which I am not too sure off, bcos I tried running 2 modules at a time from the 4 matched pair, and tey seem to work.
Only the all 4 wont work, and 3 in also gives problem.
is this motherboard messed up ?
bcos I am really thinking of switching to a diff platform as since day 1, less than 1 month ago, this mobo is giving me probs with X2 dual core.

https://mywebspace.wisc.edu/phora/web/cpuz.htm
Alright, I updated the BIOS to the latest beta, modded by side effect.
put back the 4 modules in, and they are running now
2-2-2-7 DDR 400 2.8V
though the HT is 3x unlike all previos times when it was 5x...anything to do with the probs ?
anyways, I still dont know how long this config will last, for I have has successful bootups in the past, but they end up failing later.

Similar Messages

  • KT4AV and 1Go DDR 400 RAM...

    Hi all ! Sorry for my bad english, i'm french.
    I have a problemwith RAM. I've just bought 1 Go RAM DDR 400.
    On my KT4AV user's guide, it is said that this motherboard can support up to 3 Go RAM, but just one DDR 400.
    This morning, i try to add this 1 Go RAm to my 3rd slot (the 2 others have each 256 Mo RAM). Everything seemed to work good: windows boot up fine, my system only show 1.256 GO RAM...I tried to launch a game anyway: my system rebooted!
    I tried to just let the 1 Go RAM: my system boot, but when i try to launch a game (Red Orchestra or Max Payne 2 or Silent Hunter 3 or European Air War), my system freeze, i can't even use ctrl+alt+suppr...all i can do is reset!
    Do you have any advices?
    My system is:
    AMD Athlon 2600 + 1.92 Ghz
    GeForce 7600 GS AGP 8x 512 RAM
    Windows XP Pro
    Fortron Epsilon 600 watts for my power supply.
    512 DDR 400 (for now....one thing is funny: the user's guide tells that only one DDR 400 can be supported, but i've 256 DDR 400 on my slots and everything is good!!!)

    Freezing mostly is from an overheating processor. Could you say temps, please.
    Processor and memory runs best at equal speeds.
     ... What if you made your left leg move faster than the right one, how would your "system" move along.

  • Cache memory error

    here is the hardware:
    k8t neo-fis2r ms-6702, rev 1.0
    latest ami bios version 6702ms.193
    amd 64 3400+
    kingston khx4000/512 hyperx ddr pc-4000, memory
    msi fx5900-vtd256, geforce fx 5900, video card
    antec sonata 380 watt case
    zalman cnps7000a, cpu cooler
    western digital rapter 74gb sata, hard drive
    problem is at end of boot up error message "cache memory error"
    system will not load windows xp pro.
    system bios does not show hard drive.
    can use floopy to boot into dos
    have changed out cpu, same problem.
    have changed out mother board, same problem.
    have changed out ram, same problem.
    at end of boot screen shows nvram and amount correctly.
    have tried disabling system bios cacheable, shadow ram, etc. still same problem.
    if the cache memory error can be remedied believe it possible system
    will then recognize the hard drive in the bios section, which currently only reports the cdrom drive but not the hard drive.
    any ideas? Thanks for any help.

    Hi Patrick
    Sorry, looked again and see its SATA.  No jumper on SATA.
    You will not see a SATA in normal post screens, you have to enable it in bios, either Via or Promise, I prefer Via.  In Integrated peripherals, look at page 3- 20 of manual, there is an item SATA IDE, that is Via controller, enable that. Above it is PATA IDE, the IDE1 and 2 controller, enable that. Below it the floppy disk controller, enable it (not auto).  Then go up to Onboard PCI controller, click on it, then the P20378 SATA controller, the promise controller, disable it. Check the LAN and onboard sound the AC97 controller, is enabled if you use it. The 1394 controller, the firewire for digital cameras etc. Now go to the advanced bios features, the Boot Sequence, set it to floppy, CD, and Serial CH_0 (SATA 1 on via). Enable  Boot from other devices, and enable floppy seek, (floppy swap is disabled). Then exit and save.
    You can now out your XP CD in CD drive and boot, it will ask you to press key to boot from CD, the first blue setup screen, will ask you to press F^ to load drivers, then a couple of mins later it arrives at S screen, put Via floppy in drive A, press enter, this will give list of files, select BOTH XP drivers ( you need to load 1, then back to S screen repeat for 2nd driver, then enter to proceed, next the F* ' accept ' screen, then load windows setup, then it asks if you want to install to drive. partition, format and install.
    In the bios screens your HDD will show as Via device called Serial CH_0 or Serial CH_1 (SATA2), which appear after the other drive screens.  If the promise controller is enabled, but no drive attached to SER1 or 2, then you will see a message ' Bios not  installed'
    Any problems, there should be none, let me know.
    cheers
    jocko

  • KT880 Delta 3GB DDR @ 400 with XP3200 Barton @ 400 fsb

    Hi All,
    First off...  I've been reading lots of usefull info posted on this site... But I dont have the time to absorb and fully assymilate everything.  (sorry for spelling)
    I really do need some help / info / advice.....
    System : XP3200 Barton 400 fsb
               : MSI KT880 Delta.  Latest Bios (NOT BETA BIOS)
               : 3 gb ddr 400 Ram
               : Terratec EWS88MT Sound Card (IRQ 3)
               : 120 bg Maxtor 8mg Cache
               : PSU 550 watts
    I am trying to use 3gb ddr in single channel mode. however if a place 2 dimms in socket 1 & 3 it uses them fine in dual channel mode. Now i want to use all three, so add one in socket 2... EEEEEEK    @ boot check says read write error checing NVram.
    Next I change DIMMS to other sockets, regardless of what DIMM's are in what socket if im using 3gb it says read write error.. only 2 gb works properly and fully recognises the memory.....
    I bought the memory from the same place, same manufacturer, same clock speed, same spec and They all look identickle      now forgive me if im wrong but i also bought the MOBO as it said could use 3gb in single channel mode... 
    My Brain is about to meltdown  can anybody help me....  Please... Please....
    Thanks in advance

    Hi Guys I'm back again   
    Ok here goes...    Following all the suggestions above and lots of very intensive reading (As novice in Training ) I am pleased to advise that i am no futher along the road to sorting the memory error and also changing the IRQ in XP not that that wold help any.
    I bought a good 600w PSU with 30A on the 3.3v rail and all other rails capable to run :
    3 x HDD
    1 x SoundCard
    Thats is no more peripherals in there am trying to keep it as minimal as possibe.
    Oh and I upgraded my GFX card to a Radion 9550 256m agpx8     thats very nice and seems to work well.
    Right then has anyone anymore suggestions apart from throwing this board in the dogs kennel ??
    Best Regards
    Claire   

  • Msi k7n2 delta2-FSR and problems with memories(ddr 400);help me!!!

    hello!!!!.
    I am very frustrated because is imposible that memories work fine to 200*2.I´ve tried twinmos and now ocz premier ddr-400.When i used memtest i have a lot of errors and frozen in windows.
    If i choose vdim 3.30 memtest no errors but this is a voltage very high.I don´t now what can I do.
    Is a bug of this motherboard?
    In other forum tell me that this motherboard don´t work good with memory to 400 but the motherboard has dual channel.
    i need help.
    thanks!
    pos data=sorry for my english

    Quote from: Stu on 26-March-06, 01:48:25
    how can you have a stable OC if you have memory errors?
    i don´t Know but prime no errors.
    Quote from: Stu on 26-March-06, 01:48:25
    forget about the OC for now, and get it working properly at stock speeds, then you can worry about getting an OC right
    I have tell than 166 cpu(default values in bios),there are a lot of errors(more of one hundred and froozen in windows) in memtest.

  • KT4V en 2x DDR 400

    Hi I have a msi-kt4v with a amd XP 2700+ and 2 modules of 512 MB DDR 400 (both msi certified), 350 W psu.
    The modules run at 333 Mhz seperately. When I use one memory module there is no problem whatsoever, doesn't matter wich one.
    But when I them both the computer won't start Windows XP (clean install). I have tried all combinations with the 3 slots but none works  ?( Ialso tried memtest and no problems where found.
    I know it states in the manual that only 1 ddr400 module can be used, but that shouldn't be an issue because I let them run at 333MHz.
    Or is that the problem regardless of letting them run at 333.
    Maybe any of you has an solution for me, cause I haven't got one. X(

    Quote
    Originally posted by Snorter
    I have never been able to get a pair (lots of flavours) of 512 MB DDR 400 certified or not to run together.  
    But they only run at 333 MHz doesn't that make a difference?? Like the motherboard would see them as DDR333???

  • Samsung 512 mbddr 400 original troubles

    hi all, having hella troubles with samsung ddr 400 original mem ( so the store advertized them as) chips are tccc and not tcc4, ive tried one at a time, relaxed timings, 2.6-2.7 voltage, no luck. currently im setting up my system with 2 pieces of older pc2700 memory (2x256 cheap memory) working fine @ 2.5 cas and auto everything else.. passing prime 95 ect, i put the 2 sticks of ddr 400 in my older computer ( gigabyte ga-7n400 nforce board with amd xp2200 ) and tried prime 95 with ram @ 400 fsb cas3 3-3-3-8 fails on the first iteration,, running them at 266 cas 3 fails in about 45 minutes..does this verify that the ram is bunk or are they not designed to run at 266? or having processor clocked at 13.5x 266 and ram at 400 fsb the problem? im just hoping that i dont bring them back for rma and have them pop them in there systems and have them work right off the bat..any help  or advice would rule, ill post specs below.. thanks in advance guys.. peace
    system 1 ( troubleshooting)
    msi k8t neo fsr bios 1.5
    amd 64 3000+
    2x 512 samsung original ddr400 (rma?)
    aspire atxc-as500w 12v psu
    wd 180gb ata 7200rpm hd
    ibm 75gb gxp 7200 rpm hd
    rme hammerfall 24 i/o adat optical soundcard 24/96(uninstalled at moment)
    uad powered plugins (uninstalled also)
    pioneer dvr 107d dvd burner
    custom alluminum rackmount case ( built by lcs i think)
    3x case fans ( 1x120 intake @ front + generic boxed amd cpu cooler
    cpu temp 35-48 degrees cool n quiet controlling fan spd
    system 2 ( retired computer for my girlfriend when i fix system #1 system)  
    gigabyte ga-7n400
    2x 256 MB mismatched cheap memory pc2600 (currently in system 1)
    lite on 12x cdr
    maxtor 40 7200 rpm hd
    echo mia 24/96  soundcard
    sunbeam clear acrylic atx case
    5x lcd fans ( 3 in 2 out  or 3 out counting psu)
    pc power and cooling 300w psu
    thermaltake volcano 11 i think with ducing mod

    Quote
    Originally posted by boxsoft
    I went into the BIOS settings, told it that I had DDR333, and all seems fine now.
    Nix that!  It just locked again.  I guess my only options involve downgrading to 1GB, or upgrading to 2GB.
    -=> Mike Hanson

  • Photoshop CS6 has out of memory errors under Mac OS X 10.7.4

    Has anyone who has a 2008 MacBoo Pro with the NVIDIA GeForce 8600M GT 512 MB graphics card tried running Photoshop CS6 under Mac OS X 10.7.4?
    On my MacBook Pro, PS CS6 launches; however, any action results in an out of memory error.  The CS6 versions of After Effects, Premiere Pro and Illustrator all launch and run as expected under 10.7.4.
    If I switch to my Mac OS X 10.6.8 startup volume, Photoshop CS6 runs as expected.
    I have support cases open with Adobe, NVidia and Apple.  Adobe thinks I need to update the display drivers.  NVidia says display drivers must be provided by Apple.  Apple says that the display drivers are current.  The Apple support agent said that he can escalate the case if the issue can be reproduced on more than one computer.
    I'd love to keep my MacBook Pro running another year or so without having to reboot in 10.6.8 every time I need to use Photoshop.  I'd stay with 10.6.8, but of course iCloud requires 10.7.4.
    I have not tried 10.8 yet, but it's on my troubleshooting list.
    Also, PS CS6 runs fine under Mac OS X 10.7.4 on my 2010 iMac.
    Thanks in advance for any feedback.
    - Warren

    It looks like it was indeed the display driver for the NVIDIA GeForce 8600 GT 512 MB graphics card inside my 2008 MacBook Pro.
    It seems that this driver only gets installed if you upgrade from Mac OS X 10.6.7 to 10.7.4 while the startup drive is connected to the MacBook Pro itself.  I had updated while the startup drive was connected to my 2010 iMac. Accordingly, I could have reinstalled Photoshop 100 times without it ever launching as expected.  Having used the external startup drive with three other Apple computers (all 2010 or newer machines) with Photoshop CS6 launching as expected, I had just assumed (mistakenly) that it would work as expected with my 2008 computer.
    So, this was simple enough to resolve by upgrading the OS on the external startup drive while having it connected to the MacBook Pro.   In hindsight, this makes perfect sense.
    -Warren

  • Loading JPEG/Gif images causes Out Of Memory Error

    Hello Java gurus, please shed some light on this.....
    I am not a java newbie, but I am a java newbie in the area of dealing with graphics. I am using JDK 1.4.2_01 on Win XP with 2.4ghz and 512 RAM. When I try to read in a (or a few) JPEG image into a JLabel using ImageIcon, I get an out of memory error everytime. This happens whether I am reading the image out of a jar file or out of a local directory. The JPEG's are 8.5" x 11", and range between 150kb to 900kb. I am trying to load approximately 10 images in a JTabbedPane using new JLabel(ImageIcon) on individual JPanels (one JPanel for each JPEG). Now I get the java.lang.outofmemory error whether I try to load 1 image or 10 images. Anyone got a clue as to what I am doing wrong? I actually do get one image loaded before the error gets thrown. So I do know that it is trying to load the right image. What is going on here? Is it an ImageIcon problem, or are there others who have run into this. It has brought this project to a grinding halt, and I had thought this would be the easier part!!!! Please help me out gurus! Thanks!

    What options/values are you suggesting that I set? Or do you mean something else? Thank you for any ideas that can help me solve this problem. I never had any issues dealing with using ImageIcon for toolbar button graphics (file sizes of 1-3kb), but now with dealing with full page graphics I have run into a brick wall with this out of memory error.

  • Out of Memory Error in iplanet 6.1

    While starting iplanet 6.1 sp2 in HP-UX 11.00 , out of memory error occurs. Value for JVM heapsize is set to min 128 MB and Max of 512 MB. Tried changing both the values to 512 MB, still the error occurs.
    Please revert with any solution.

    Please find the values of JVM HeapSIze and HP-UX process and address space limits.
    JVM Heap size has been changed to
    Min 128MB
    Max 2GB
    max_thread_proc 2048
    maxdsiz 1073741824
    maxssiz 401604608
    maxtsiz 1073741824
    After the modification of the above changes , out of memory errors occurs.Find the logfile below.
    [21/Feb/2005:09:37:31] failure ( 8528): for host 163.38.174.17 trying to POST /wect/servlets/com.citicorp.treasury.westerneurope.maintenance.PageLinksServlet, service-j2ee reports: StandardWrapperValve[PageLinksServlet]: WEB2792: Servlet.service() for servlet PageLinksServlet threw exception
    javax.servlet.ServletException: WEB2664: Servlet execution threw an exception
    at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:793)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
    at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
    at com.iplanet.ias.web.WebContainer.service(WebContainer.java:578)
    ----- Root Cause -----
    java.lang.OutOfMemoryError
    [21/Feb/2005:09:45:04] warning ( 8528): HTTP3039: terminating with 6 sessions st
    ill in progress
    [21/Feb/2005:09:45:04] failure ( 8528): CORE3189: Restart functions not called since 6 sessions still active
    Please suggest.

  • Another version of 'out of memory' error

    Hi all
    I have a colleague who is getting the following error message.
    As discussed...when I attempt to render a clip on the timeline, once it
    gets to the end of the rendering process and attempts to play the clip, an
    'out of memory' error message box appears on the screen.
    Then when I click on 'OK' to close this box, the canvas window turns to red
    and the following message displays in the canvas window...'Out of memory.
    Free up memory and window will redraw.'
    He is using HDV footage captured with the "HDV" codec [not the intermediate one], and editing it into HDV1080i50 sequences.
    He has a G5 DP 2 GHZ machine running Tiger 10.4.2 and 2 GB of ram.
    He has approx 80 GB free space on Mac HD and approx 400 GB on external Lacie HD. He is running only FCP HD 5 at any one time.
    I have sourced some previous posts which speak of corrupt graphics, clips, sequences and trashing fcp prefs.
    Does anyone have any other suggestions for him?
    [He is quite new to macs and FCP especially].
    I am going to send him an email to subscribe and create an account for this forum, his name is AGebhardt.

    Hello,
    I had the same issue last night, when a render (only 15 min., so not THAT big) completed and would not play and the canvas turned red and said I was out of memory.
    This is different than a general error! out of memory warning, which I have seen happen. Some of the answers in linked threads seem to be pointing to this other situation.
    I have plenty of space and plenty of RAM and was only running iTunes. I quit iTunes and it worked, almost to my disappointment because in the past I have had many apps working at a time with no problems,
    I would be pretty bummed if I could only have FCP open all of a sudden.
    I will try going through my clips to check for corruptions as suggested just to be on the safe side, but have a question;
    What good is it to throw out your render files if you have already checked to see if you have enough storage space? I can see the good if a file is corrupt, but with every project a new render folder is created and unless there is a limit on these folders that I'm unaware of I can't see the sense in trashing the folder.
    Am I missing something?
    Thanks,
    Jesse
    733 G4    

  • DDR 400 = two sticks at 200 bus speed each, or 400 each?

    I ran CPUz on my new 2 X 1GB DDR 400 PC 3200 sticks and it said both are running at 200 each.

    200mhz is the rated speed for each of your memory sticks.  DDR (Double Data Rate) lets them perform at 400mhz.

  • Out of memory errors

    I'm having problems starting 8i. When started from /etc/rc.d/
    init.d/dbora during bootup or manually by root, I get an out of
    memory error.
    If I start it from the dbadmin user (oracle), I either get the
    same out of memory error, or I end up with several hundred shell
    logins and the database still doesn't respond.
    This is RedHat Linux 6.0, kernel 2.2.5-22smp. Here is a sample of
    what happens when I get the out of memory error:
    Mem: 160448K av, 53488K used, 106960K free, 26264K shrd,
    6532K buff
    Swap: 656360K av, 0K used, 656360K free
    36328K cached
    Oracle Server Manager Release 3.1.5.0.0 - Production
    (c) Copyright 1997, Oracle Corporation. All Rights Reserved.
    Oracle8i Release 8.1.5.0.0 - Production
    With the Java option
    PL/SQL Release 8.1.5.0.0 - Production
    SVRMGR> Connected.
    SVRMGR> ORA-27102: out of memory
    Linux Error: 22: Invalid argument
    SVRMGR>
    Server Manager complete.
    Database "ORCL" warm started.
    null

    It turns out that the problem I was having with a large number of
    shell processes being created was due to the use of oraenv in my
    .bashrc file (so much for following the instructions!) It was
    calling itself recursively until the process limit was reached.
    However, even with this fixed, the out of memory error still
    exists.
    max (guest) wrote:
    : dan....
    : check your init.ora......
    Aside from comments, it has these lines, which were created by
    dbassist:
    db_name = test
    instance_name = ORCL
    service_names = test
    control_files = ("/u02/oradata/test/control01.ctl", "/u02/oradata/
    test/control02.ctl")
    db_block_buffers = 8192
    shared_pool_size = 4194304
    log_checkpoint_interval = 10000
    log_checkpoint_timeout = 1800
    # I reduced processes to see if it would help
    processes = 10
    log_buffer = 163840
    background_dump_dest = /u01/admin/test/bdump
    core_dump_dest = /u01/admin/test/cdump
    user_dump_dest = /u01/admin/test/udump
    db_block_size = 2048
    remote_login_passwordfile = exclusive
    os_authent_prefix = ""
    compatible = "8.1.0"
    : also check ulimit
    Here's ulimit -a:
    core file size (blocks) 1000000
    data seg size (kbytes) unlimited
    file size (blocks) unlimited
    max memory size (kbytes) unlimited
    stack size (kbytes) 8192
    cpu time (seconds) unlimited
    max user processes 256
    pipe size (512 bytes) 8
    open files 1024
    virtual memory (kbytes) 2105343
    Everything looks pretty large to me.
    : Dan Wilga (guest) wrote:
    : : I'm having problems starting 8i. When started from /etc/rc.d/
    : : init.d/dbora during bootup or manually by root, I get an out
    : of
    : : memory error.
    : : If I start it from the dbadmin user (oracle), I either get
    the
    : : same out of memory error, or I end up with several hundred
    : shell
    : : logins and the database still doesn't respond.
    : : This is RedHat Linux 6.0, kernel 2.2.5-22smp. Here is a
    sample
    : of
    : : what happens when I get the out of memory error:
    : : Mem: 160448K av, 53488K used, 106960K free, 26264K shrd,
    : : 6532K buff
    : : Swap: 656360K av, 0K used, 656360K free
    : : 36328K cached
    : : Oracle Server Manager Release 3.1.5.0.0 - Production
    : : (c) Copyright 1997, Oracle Corporation. All Rights Reserved.
    : : Oracle8i Release 8.1.5.0.0 - Production
    : : With the Java option
    : : PL/SQL Release 8.1.5.0.0 - Production
    : : SVRMGR> Connected.
    : : SVRMGR> ORA-27102: out of memory
    : : Linux Error: 22: Invalid argument
    : : SVRMGR>
    : : Server Manager complete.
    : : Database "ORCL" warm started.
    null

  • (AIR) out of memory error when building workspace

    Hi,
    I created a very simple AIR project. But during the load the
    workbench gave me out of memory errors.
    Please find below the relevant .log entries.
    Thanks for your help,
    -Rogier
    !SESSION 2007-06-13 14:13:10.241
    eclipse.buildId=unknown
    java.version=1.5.0_11
    java.vendor=Sun Microsystems Inc.
    BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
    Command-line arguments: -os win32 -ws win32 -arch x86
    !ENTRY org.eclipse.ui 4 4 2007-06-13 14:13:30.383
    !MESSAGE Invalid Menu Extension (Path is invalid):
    goToResource
    !ENTRY org.eclipse.ui 4 4 2007-06-13 14:13:46.565
    !MESSAGE Invalid Menu Extension (Path is invalid):
    org.eclipse.jdt.ui.actions.GoToPackage
    !ENTRY org.eclipse.ui 4 4 2007-06-13 14:13:46.565
    !MESSAGE Invalid Menu Extension (Path is invalid):
    org.eclipse.jdt.ui.actions.GoToType
    !ENTRY org.eclipse.core.jobs 4 2 2007-06-13 16:29:02.002
    !MESSAGE An internal error occurred during: "Building
    workspace".
    !STACK 0
    java.lang.OutOfMemoryError: PermGen space
    !ENTRY org.eclipse.ui 4 4 2007-06-13 16:29:02.159
    !MESSAGE Unhandled event loop exception
    !ENTRY org.eclipse.ui 4 0 2007-06-13 16:29:02.159
    !MESSAGE PermGen space
    !STACK 0
    java.lang.OutOfMemoryError: PermGen space
    !ENTRY org.eclipse.core.jobs 4 2 2007-06-13 16:29:04.675
    !MESSAGE An internal error occurred during: "Building
    workspace".
    !STACK 0
    java.lang.OutOfMemoryError: PermGen space
    !ENTRY org.eclipse.ui 4 4 2007-06-13 16:29:04.691
    !MESSAGE Unhandled event loop exception
    !ENTRY org.eclipse.ui 4 0 2007-06-13 16:29:04.691
    !MESSAGE PermGen space
    !STACK 0
    java.lang.OutOfMemoryError: PermGen space
    !ENTRY org.eclipse.ui 4 4 2007-06-13 16:29:19.067
    !MESSAGE Unhandled event loop exception
    !ENTRY org.eclipse.ui 4 0 2007-06-13 16:29:19.098
    !MESSAGE Failed to execute runnable
    (java.lang.OutOfMemoryError: PermGen space)
    !STACK 0
    org.eclipse.swt.SWTException: Failed to execute runnable
    (java.lang.OutOfMemoryError: PermGen space)
    at org.eclipse.swt.SWT.error(SWT.java:3374)
    at org.eclipse.swt.SWT.error(SWT.java:3297)
    at
    org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:126)
    at
    org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3325)
    at
    org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2971)
    at
    org.eclipse.jface.window.Window.runEventLoop(Window.java:820)
    at org.eclipse.jface.window.Window.open(Window.java:796)
    at
    org.eclipse.ui.internal.ide.dialogs.InternalErrorDialog.open(InternalErrorDialog.java:78)
    at
    org.eclipse.ui.internal.ide.dialogs.InternalErrorDialog.openQuestion(InternalErrorDialog. java:185)
    at
    org.eclipse.ui.internal.ide.IDEExceptionHandler.openQuestionDialog(IDEExceptionHandler.ja va:174)
    at
    org.eclipse.ui.internal.ide.IDEExceptionHandler.handleException(IDEExceptionHandler.java: 100)
    at
    org.eclipse.ui.internal.ide.IDEWorkbenchAdvisor.eventLoopException(IDEWorkbenchAdvisor.ja va:298)
    at
    org.eclipse.ui.internal.ExceptionHandler.handleException(ExceptionHandler.java:62)
    at
    org.eclipse.ui.internal.progress.ErrorNotificationManager$1.run(ErrorNotificationManager. java:82)
    at
    org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
    at
    org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:123)
    at
    org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3325)
    at
    org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2971)
    at
    org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1930)
    at
    org.eclipse.ui.internal.Workbench.runUI(Workbench.java:1894)
    at
    org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:422)
    at
    org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
    at
    com.adobe.flexbuilder.standalone.FlexBuilderApplication.run(FlexBuilderApplication.java:1 03)
    at
    org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:78)
    at
    org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:92)
    at
    org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:68)
    at
    org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:400)
    at
    org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:177)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
    Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown
    Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown
    Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at
    org.eclipse.core.launcher.Main.invokeFramework(Main.java:336)
    at org.eclipse.core.launcher.Main.basicRun(Main.java:280)
    at org.eclipse.core.launcher.Main.run(Main.java:977)
    at org.eclipse.core.launcher.Main.main(Main.java:952)
    Caused by: java.lang.OutOfMemoryError: PermGen space
    !ENTRY org.eclipse.ui.workbench 4 2 2007-06-13 16:34:11.522
    !MESSAGE Problems occurred when invoking code from plug-in:
    "org.eclipse.ui.workbench".
    !STACK 0
    java.lang.NullPointerException
    at
    org.eclipse.ui.internal.EditorManager.convertToSaveables(EditorManager.java:1336)
    at
    org.eclipse.ui.internal.EditorManager.saveAll(EditorManager.java:1203)
    at
    org.eclipse.ui.internal.Workbench$13.run(Workbench.java:790)
    at
    org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
    at
    org.eclipse.ui.internal.Workbench.saveAllEditors(Workbench.java:738)
    at
    org.eclipse.ui.internal.Workbench.busyClose(Workbench.java:658)
    at
    org.eclipse.ui.internal.Workbench.access$8(Workbench.java:642)
    at
    org.eclipse.ui.internal.Workbench$15.run(Workbench.java:855)
    at
    org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:67)
    at
    org.eclipse.ui.internal.Workbench.close(Workbench.java:853)
    at
    org.eclipse.ui.internal.Workbench.close(Workbench.java:828)
    at
    org.eclipse.ui.internal.Workbench$23.handleEvent(Workbench.java:1848)
    at
    org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
    at
    org.eclipse.swt.widgets.Display.sendEvent(Display.java:3484)
    at
    org.eclipse.swt.widgets.Display.messageProc(Display.java:2675)
    at org.eclipse.swt.internal.win32.OS.DefWindowProcW(Native
    Method)
    at
    org.eclipse.swt.internal.win32.OS.DefWindowProc(OS.java:1927)
    at
    org.eclipse.swt.widgets.Shell.callWindowProc(Shell.java:443)
    at
    org.eclipse.swt.widgets.Control.windowProc(Control.java:3334)
    at
    org.eclipse.swt.widgets.Decorations.windowProc(Decorations.java:1539)
    at org.eclipse.swt.widgets.Shell.windowProc(Shell.java:1634)
    at
    org.eclipse.swt.widgets.Display.windowProc(Display.java:4025)
    at org.eclipse.swt.internal.win32.OS.PeekMessageW(Native
    Method)
    at
    org.eclipse.swt.internal.win32.OS.PeekMessage(OS.java:2401)
    at
    org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2963)
    at
    org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1930)
    at
    org.eclipse.ui.internal.Workbench.runUI(Workbench.java:1894)
    at
    org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:422)
    at
    org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
    at
    com.adobe.flexbuilder.standalone.FlexBuilderApplication.run(FlexBuilderApplication.java:1 03)
    at
    org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:78)
    at
    org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:92)
    at
    org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:68)
    at
    org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:400)
    at
    org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:177)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
    Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown
    Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown
    Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at
    org.eclipse.core.launcher.Main.invokeFramework(Main.java:336)
    at org.eclipse.core.launcher.Main.basicRun(Main.java:280)
    at org.eclipse.core.launcher.Main.run(Main.java:977)
    at org.eclipse.core.launcher.Main.main(Main.java:952)
    !ENTRY org.eclipse.ui 4 4 2007-06-13 16:34:19.959
    !MESSAGE Unhandled event loop exception
    !ENTRY org.eclipse.ui 4 0 2007-06-13 16:34:19.959
    !MESSAGE PermGen space
    !STACK 0
    java.lang.OutOfMemoryError: PermGen space

    Hi Rogier,
    Can you please log it in our new public bug system:
    http://bugs.adobe.com/flex?
    It'd be great if you can provide more info to the bug e.g.
    details of your simple AIR project, platform, FB version (Plugin or
    Standalone).
    thanks,
    Sharon

  • Photoshop out of memory error

    Hi, I am running in a mixed enviroment with Open Directory master for authentication on a Snow Leopard OS 10.68 server, with both Lion and Snow Leopard client machines. My Users, due to Adobe products crashing with none mobile accounts, are using external hard drives formatted OS Extended (Journaled) with their mobile account setup on that Hard Drive. This year it has been touch and go on login issues but working throught that. My problem is when a user uses a Lion machine 10.7.4 and Photoshop extended and then moves to our study lab which has Snow Leopard, photoshop workspaces are corrupted and they cannot open any photo's or settings, they get an "Out of memory" error. However when they go back to the Lion machine and after resetting their workspace they can use the software without issues. Anyone else hiving these issues? Ive tried chflags nohidden library in Snow Leopard to view settings, even deleted all photoshop settings in App data and preferences and still cannot access photoshop on SL machine.
    Thanks

    Thanks Kurt for the reply. I'll give more info. All machines have latest updates for both CS6 and current version of OS either 10.6.8 or 10.7.4.
    The only thing on the external hard drive is the user's home folder and their Data, I have to have permissions enabled so their home preferences and WGM settings work correctly. BTW all accounts have admin rights to machine, I have WGM settings preventing access to machine settings and can re-image if i get corrupted machines.
    PS is installed on each machine not the  External Hard Drive.
    All machines have the same Volume name for the internal boot drive, which is set as the PS scratch drive.
    I thought this issue was to do with the memory and may still be so.
    However when a clean profile is connected to our towers with Lion which has 12 gb ram and 1024 MB Video Memory, the settings are at 70% which is around 8 gb.
    When i take same clean profile to our other lab of iMacs which has 8 gb ram. and 512 mb video memory, PS adjusts the performance ram accordingly which is around 5.5 gb ram at 70%.
    I then take that same external drive to the problem iMac's (early 2009 and 2008) which has 4gb ram 256 video memory and is running Lion, PS adjust to 2.4 gb ram.
    Now i put that same drive on the same model, 2009 or 2008 iMac that has Snow Leopard running on it from same model Lion iMac,PS opens fine.
    However after moving from one of the other larger Lion machines and then back to this Snow Leopard machine, the profile gets corrupted, the workspace is corrupted and cannot reset it. Also I am unable to access any settings I get the "Could not complete the operation because there is not enough memory (RAM)" error.
    Now when I go back to a same model Lion machine with same minimum memory i get the same error, however when I go to a larger Lion machine all I get is Color profile cannot sync and the workspace is still corrupted and not showing but I can reset it.
    I then move the performance size to match that of the lower model’s 70%, I still get the error when I go back to the lower end Lion or Snow Leopard machine.
    I tried clearing PS preferences by opening with command+option+shift and delete PS preferences the issue is still there.
    I then remove all PS ~/Library/ settings for PS and it is still present.
    I had to re-create the profile all together to get this to work. As long as I don’t connect to a low end Snow Leopard machine things seem to be going well and PS readjust according to the machine, note, when I set the performance level to a low setting let's say 2.5 gb as on the early iMacs and plug into another machine, PS adjusts to the current machine' mamory availability and does not keep that lower setting setting.
    I have a copy of console error message below.
    9/18/12 2:31:51 PM Adobe Photoshop CS6[254] *** __NSAutoreleaseNoPool(): Object 0x10aa114d0 of class NSCFString autoreleased with no pool in place - just leaking
    9/18/12 2:31:51 PM Adobe Photoshop CS6[254] *** __NSAutoreleaseNoPool(): Object 0x106d65010 of class NSBundle autoreleased with no pool in place - just leaking
    9/18/12 2:31:51 PM Adobe Photoshop CS6[254] *** __NSAutoreleaseNoPool(): Object 0x11db6aa60 of class NSCFString autoreleased with no pool in place - just leaking
    9/18/12 2:31:51 PM Adobe Photoshop CS6[254] *** __NSAutoreleaseNoPool(): Object 0x10a98bc40 of class NSCFString autoreleased with no pool in place - just leaking
    9/18/12 2:31:51 PM Adobe Photoshop CS6[254] *** __NSAutoreleaseNoPool(): Object 0x1371a73e0 of class NSCFData autoreleased with no pool in place - just leaking
    9/18/12 2:31:51 PM Adobe Photoshop CS6[254] *** __NSAutoreleaseNoPool(): Object 0x1371f7320 of class NSCFData autoreleased with no pool in place - just leaking
    I have 12 Snow Leopard machines that are early 2008 and 2009 imac and no way to up upgrading to Lion and I am not ready for Mountain Lion to go into production untill I can upgrade my OD masters to Mountain Lion.
    I suspect it's not the ram settings that are affected but the video ram is not adjusting from machine to machine, is it possible to upgrade the 2009 20" iMac video cards and get proper firmware support?
    any help is appreciated.

Maybe you are looking for