Memory error on inventory scan

I've noticed that a few of our servers get this message in the console
after the daily inventory scan runs. Is this normal? Or does the cache
memory allocator need to be increased? if so how? Thanks
4-20-2006 6:04:42 am: SERVER-5.70-0 [nmID=6001D]
Cache memory allocator out of available memory.
4-20-2006 6:04:42 am: SERVER-5.70-0 [nmID=2000A]
Short term memory allocator is out of memory.
5 attempts to get more memory failed.
request size in bytes 278888448 from Module MPKSCAN.NLM

Ralph,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Im getting an not enough memory to complete this scanning operation error

I am using a WIA-HP CLJ CM1312 Scanner with Adobe Acrobat 9 Standard Version 9.4.6
This machine is Windows XP with 3gigs of RAM and plenty of HDD space....
When I try to make a color copy at a Resolution of 1200DPI I get an error saying that - "There is not enough memory to complete this scanning operation." It only works at 600DPI
I dont understand why I am getting this error. I would have thought my upgrade to 3gigs of RAM would have fixed this error.

1200 dpi can actually mean a lot of memory.
See if the steps under "error messages when scanning" releated to data transfer mode on this page help: http://kb2.adobe.com/cps/325/325262.html

What is a supply memory error 10.1000? How can I fix it? My printer won't scan nor print.

My Laser Jet M1212nf MFP still copies, but everytime I try to print or scan a document it doesn't work and it shows a supply memory error on the display. I already tried to switchof and uplug the printer, but the problem still persits. Can anybody help me???
This question was solved.
View Solution.

Just fixed this on yet another Laserjet 2600dn....
Remove the affected cartridge. Look at where the chip on the cartridge hits the reader at the rear of the machine. There are two triangular 'wires' which hit the chip.
They should both be raised proud of their mount. In all cases of this error which I have dealt with (I'm a reseller) one or both have been pushed into the mount and are failing to spring out when the cartridge is removed.
This prevents the chip being read.
The solution? Grab them and gently pull them proud again so that the inserted cartrdige makes firm contact with them.
Problem solved! Hope this helps at some people experiencing this issue.

RoboHelp 9 gives an out of memory error and crashes when I try to import or link a Frame 10 file or

I have Tech Suite 3. If I start a new RoboHelp project and try to import or link Frame files, RoboHelp tries for a while, then I get an Out of Memory error and the program crashes.
I opened one of the sample projects and was able to link to one of my frame files without any problem, so it seems to be an issue with creating something new.
Any suggestions?

It happens when I create a new project and then try to import or link frame docs to make up the content. It starts scanning, then crashes. I did get it to the conversion setting page once, but no further.
It does not happen if I open one of the supplied example projects and link a file. But then it doesn't let me choose, during import, any style mapping. And I can't delete the sample project fold
Twice now it has told me when I tried to import (not link, but import) that my .fm file could not be opened, and told me to verify that Frame is installed (it is) and that the file is a valid frame file (it is).
The docs and project are in separate folders on my C: drive.

Memory Error in Bridge while running a script with multiple moveTo()'s.

I have written a script to create folders based on the names of assets in the parent folder, then move the assets with matching names into the appropriate folders. The script runs perfectly up to somewhere between 1,000 to 1,500 images moved and then I receive a memory error from Bridge.
I have been running this on folders with an excess of 25,000 assets in them. My work around was to put a simple counter in the script to let me know when 1,000 assets had been moved, throw up an alert, and then I would view the Task Manager to let me know when the CPU usage had dropped below 50% and would ok the alert, then it would run the next 1000 assets.
My question, is it possible in scripting to monitor your memory usage to allow a pause in the script so Bridge processing can catch up?

Don't do that!
$.sleep() doesn't "sleep". ExtendScript is not multi-threaded. $.sleep just waits on the $.sleep() command to execute. It actually blocks all processing rather than free up the processor to do things like garbage collection.
First try the $.gc() command. To my knowledge there is no way to track ES' memory usage.
If that doesn't work, try scheduling a task...
Let's say that you find that after 1000 moves, it takes 60 seconds for the processor to cool off:
doAThousandMoves = function() {
// execute 1000 moves
app.scheduleTask( "doAThousandMoves()", 60000, true );
The way I would actually code this is to scan the folder tree and create a global array that contained all of the files to be moved.
I would then move them 1 at a time, shifting them off the array. Something like this:
var mover = {}; // global object declaration
mover.init = function() {
mover.files = new Array();
// fill mover files with the file objects to be moved.
app.scheduleTask( "mover.move()", 10 );
mover.move = function() {
var i = 0;
while ( i++ < 1000 ) {
file = mover.files.shift();
// move file
if ( mover.files.length > 0 ) {
app.scheduleTask( "mover.move()", 60000 );
In fact, you should probably break this into chunks of about 10 or so at a time (you can reduce the gap between calls). Doing so will make the operation appear to be running as a background process.
Regards
Bob

Adobe X Pro 10.1.10 Out of Memory error message

Hello One, Hello All
Since updating our Adobe X Pro machines to version update 10.1.10, we occasionally receive an "Out of Memory" error message, which depending on what we are doing, may force us to shutdown all Adobe windows and re-open Adobe, or simply click OK and continue working with the PDF document like nothing is wrong. It seems to have no rhyme or reason to when or why it occurs. I do not see any warnings or errors in the Windows Event Log. It happens with files we have created, and also happens with files received from internal and external sources through email. It is affecting our high end machines: Lenovo X Series and W Series laptops with Windows 8.1 3rd/4th gen i5 CPUs, 8+GB RAM, 128+GB SSD's. We have all system and Windows updates applied. We have Trend Micro and Malwarebytes real-time protection and system scans do not find any malware.
I have found a few other recent threads on Adobe forum related to this error message but the responses are weak at best with no definitive fix. The system and user temp folders size are less than 100MB each so this cannot be the issue. When the error occurs I check task manager and system utilization, including memory, is well below 100%.
We did not have this issue prior to version update 10.1.10.
Really hoping Adobe can step in to help here and hoping boilerplate responses are not used.

Hi wayne103,
We released a new security update yesterday that is v10.1.11
Please update to this version and check the performance.
I have seen this error message occur while opening a 3rd party created pdf that has corrupted file structure.
Please let me know if the issue occurs for some specific files or random
Also let me know the PDF producer for these pdfs.
Regards,
Rave

MAP 7.0 errors completing inventory

I am using MAP v7.0 to run hardware and software inventory scans on Windows and Linux/Solaris servers and receive errors not found in any of the blogs or documentation. The specific error is "Failed- Inventory not completed". I cant think of a more generic
non descriptive error, the log does not seem to point to anything.
This error is generated when running the inventory scans on Linux/Solaris servers via SSH.
I have the firewall open SSH port 22 and the credentials provided for the scan are root or equal to root, any information or solution for the error?

Did you ever get an answer to this question? I am getting the same error on a few of my Linux servers with no documentation to help me.

Out of memory error - WLW Schema Project build

hi
Wasn't sure which group (workshop vs xmlbeans) but here goes.
I'm doing a persomal eval of the WLS 8.1.1. platform.
My current focus is on XML Schema support, XML Beans, transformations etc
and in particular how it all copes with large schema.
I'm using Justice XML Data Dictionary (3.0.0.0) as an example of a large
schema
(http://it.ojp.gov/jxdd/)
I am getting an out of memory error when I build this within WLW.
The build appears to be in the javac phase (and occurs when the memory goes
over 256M) so I think it's the ANT task.
WLW doesn't seem to be running out of memory and the build machine is not
running out of resources.
Where do I configure this? The <xmlbean> tag ? Is there any doco?
regards
Jim Nicolson
=============== Build trace below ====================
Build project JXDDSchema started.
BUILD STARTED
build:
check-uptodate:
build-sub:
Updating property file:
C:\data\projects\bea\integration\wlitest\.workshop\.ide\JXDDSchema\build.pro
perties
Deleting directory
C:\DOCUME~1\JIMNIC~1\LOCALS~1\Temp\.wlw-temp\wlw_compile38940\JXDDSchema
Created dir:
C:\DOCUME~1\JIMNIC~1\LOCALS~1\Temp\.wlw-temp\wlw_compile38940\JXDDSchema
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\jxdds_3.0.0.0_full-doc.x
sd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\iso_639-2t_1.0.0.0_full-
doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\ut_offender-tracking-mis
c_1.0.0.0_full-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\ncic_2000-gun_1.0.0.0_fu
ll-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\ncic_2000-other-transact
ions_1.0.0.0_full-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\ncic_2000-uniform-offens
e_1.0.0.0_full-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\mn_offense_1.0.0.0_full-
doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\dod_jcs-pub2.0-misc_1.0.
0.0_full-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\cap_1.0.0.0_full-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\nibrs_misc_1.0.0.0_full-
doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\fips_6-4_1.0.0.0_full-do
c.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\iso_3166_1.0.0.0_full-do
c.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\dod_misc_1.0.0.0_full-do
c.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\ncic_2000-misc_1.0.0.0_f
ull-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\ncic_2000-boat_1.0.0.0_f
ull-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\ncic_2000-securities_1.0
.0.0_full-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\ncic_2000-article_1.0.0.
0_full-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\unece_rec20-misc_1.0.0.0
_full-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\ncic_2000-state-country_
1.0.0.0_full-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\iso_4217_1.0.0.0_full-do
c.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\fips_10-4_1.0.0.0_full-d
oc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\ansi_d20_1.0.0.0_full-do
c.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\iso_639-2b_1.0.0.0_full-
doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\fips_5-2_1.0.0.0_full-do
c.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\ncic_2000-vehicle_1.0.0.
0_full-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\dod_exec-12958_1.0.0.0_f
ull-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\ncic_2000-personal-descr
iptors_1.0.0.0_full-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\usps_states_1.0.0.0_full
-doc.xsd
Time to build schema type system: 6.75 seconds
The system is out of resources.
Consult the following stack trace for details.
java.lang.OutOfMemoryError
BUILD FAILED
BUILD FAILED

hi Kevin
Thanks I'll take a look there.
I think it's a good move to make XMLBeans open source.
(I've been using Castor for the same purpose for the last two years).
I was mainly focussed on XMLBeans as they are used in WLW context and my
testing suggested that I would probably want to know more about the ANT
build/tasks etc. (Just to be able to deal with unexpected issues)
It's not urgent - I'm just doing a personal eval to come up to speed with
WLS 8.1 platform.
thanks
Jim Nicolson
"Kevin Krouse" <[email protected]> wrote in message
news:[email protected]..
Sorry, the first URL should have been:
http://cvs.apache.org/viewcvs.cgi/*checkout*/xml-xmlbeans/v1/xkit/anttask.html?rev=1.2
>
--k
On Tue, 30 Sep 2003 22:35:58 -0700, Kevin Krouse wrote:
Hi Jim,
Well, the XMLBean docs are in a process of moving into the Apache
XMLBeans
project (http://xml.apache.org/xmlbeans), so I can point you to where
they
are in the cvs repository. You can also look at the source if you'dlike!
>>
Here's an html doc for the xmlbean task:
http://cvs.apache.org/viewcvs.cgi/*checkout*/xml-xmlbeans/v1/xkit/anttask.html?rev=1.2http://cvs.apache.org/viewcvs.cgi/*checkout*/xml-xmlbeans/v1/xkit/anttask.html?rev=1.2
>>
Here's the code for the xmlbean task:
http://cvs.apache.org/viewcvs.cgi/xml-xmlbeans/v1/src/xmlcomp/org/apache/xmlbeans/impl/tool/XMLBean.java?rev=HEAD&content-type=text/vnd.viewcvs-markup
>>
>>
As to your second question about WLW becoming unresponsive, after the
Schemas.jar is built, the source for the entire project is re-scanned
which could take several minutes. The performance impact of rescanning
the project is improved in SP2 and will be addressed even more in future
releases. Stay tuned.
--k

Out of Memory error after upgrading to Reader X

We have several PDF documents that work fine on Reader 9. But after upgrading to Reader X, the files will not open. Instead, they report an Out Of Memory error and a blank document opens instead. Removing Reader X and re-installing Reader 9 corrects the issue. This has been reproduced on 3 different PCs running both Windows XP and Windows 7.
Any suggestions?

Just to throw in my 2 cents... Adobe has known about the out of memory bug at least since 01/12/2011 because that is when I reported the problem to them. I even had an escalated support case #181995624 and bug#2800823. Our problem comes from a EFI Fiery E7000 attached to our Lanier LD460c Copier. Any pdf's made from that copier will not open in Acrobat X, although they will open in lower versions of Acrobat just fine. Our only workaround is to keep Acrrobat 9 on office computers, or you can open the offending pdf in Acrobat 9 or earlier and print it to pdf, and then it will open in Acrobat X!!! They acknowledged that this was a bug, see my email chain below. This was the last update I received from Adobe, very frustrating...
From:
Sent: Wednesday, February 09, 2011 9:12 AM
To:
Cc:
Subject: RE: Case 181995624; Unable to open PDF
Hi Phil,
We do not have this information or estimate time by our Engineering team yet.
Regards,
Neeraj
From:
Sent: Monday, February 07, 2011 8:19 PM
To:
Cc:
Subject: RE: Case 181995624; Unable to open PDF
Next major release as in the next patch for Acrobat X, or as in Acrobat 11?
From:
Sent: Saturday, February 05, 2011 4:31 AM
To:
Cc:
Subject: Case 181995624; Unable to open PDF
Hi Phil,
You can get back to us with the Bug Number provided you earlier based on which we will give you the update by our Engineering team. However, the update for now is that it is decided to fix in our next major release.
Regards,
Neeraj
From:
Sent: Thursday, February 03, 2011 1:33 AM
To:
Subject: RE: Case 181995624; Unable to open PDF
Can you send me a link to where I can find information on the bug?
From:
Sent: Tuesday, February 01, 2011 10:14 AM
To:
Cc:
Subject: Case 181995624; Unable to open PDF
Hi Phil,
Hope you are doing well.
I have researched on your issue and found that it is a BUG with Acrobat X. I have logged it on your behalf so that our Engineering team can have a look on that. Please find the Bug Number #2800823 for any update on this in future. I am closing this case on your behalf.
Have a nice day.
Regards,
Neeraj
From:
Sent: Tuesday, February 01, 2011 12:22 AM
To:
Cc:
Subject: RE: Case 181995624; Unable to open PDF
Any updates on this case?
From:
Sent: Friday, January 14, 2011 2:03 PM
To:
Cc:
Subject: RE: Case 181995624; Unable to open PDF
The EFI Fiery E-7000 Controller version is 1.2.0 and it handles the scanning and printing functionality of our Lanier LD160c copier. I have attached two sample files. One is a 1 page scan from our copier. The other is a combined pdf that I just created in Acrobat 9. The first two pages of the combined pdf consists of a webpage that I printed using Acrobat 9 and then the scan from the copier is on the 3rd page. In Acrobat X, once you get to the 3rd page you will receive the Out of Memory error. It will open in previous versions of Acrobat just fine though.
From:
Sent: Friday, January 14, 2011 11:52 AM
To:
Cc:
Subject: Case 181995624; Unable to open PDF
Hi Phil,
Thanks for the information.
I have the PDF file provided by you and able to reproduce the behavior. I tried to call you at 214-303-1500 but got voice mail.
Please let me know when you will be available so that I could call you and continue further with this issue.
Regards,
Neeraj
From:
Sent: Thursday, January 13, 2011 6:57 AM
To:
Cc:
Subject: Re: Case 181995624; Unable to open PDF
It is a walk up copier and we scan to email. The EFI Fiery controller E7000 handles pdf conversion for the copier, but yes it has the latest firmware. The bottom line is that we have 3 or 4 years worth of pdfs created from that copier rendered useless by Acrobat X. They open fine in previous versions of Acrobat. Did you get the test pdf file when this case was created?
-- Sent from my Palm Pre
On Jan 12, 2011 6:12 PM, Acrobat Support <[email protected]> wrote:
Hi Philip,
Thank you for choosing Adobe Support we have got your concern, we see that you are facing an issue with opening PDF files in Acrobat X, created from Lanier (Ricoh) LD160c copier. A technical support case 181995624 has been created for your reference. In order to assist you further. We would like to have the following information.
· Are you using the latest scanner driver ?
· What is the exact scanning workflow ?
Regards
Acrobat Support

Out of memory error adobe elements 3.0

When I try to open adobe photo elements 3.0 I get an out of memory error. the application wont even open. I upgraded my RAM from 2GB to 3 GB but it has made no difference

stacey_r79 wrote:
Hi, just wondering if you had any success in retreiving or opening your Organizer?? Im having the same problem and i have tried everything, i even rang Adobe and they told me there were no technitions able to help because Adobe Photoshop Elements 3.0 was too old. If anyone has a solution please let me know, i have 5 years worth of photos in this software, i just want to be able to open the organizer to burn all my pics to CD then i will update my software. PLEASE HELP!!!!!!!!
First of all, your photos are not, "in this software" they are in folders on your hard drive, and PSE merely points to them. If >>you personally<< didn't delete them, or reformat your HDD, then they are still there. The default file path for your photos is this; "My Documents" > "My Photos" > "Adobe", and then a couple of different folders dependent on photo type, for example, "Scanned Photos".
If you are using the default location, you can simply copy and paste you pictures to an external HDD, or burn them to CD or DVD with Windows. I am not recommending this, since if would not allow you to carry over information created by the organizer, and the photos would have to be reimported and retagged, by your files would be backed up and safe, the most important thing.
There really isn't a need for all these histrionics, Even if you uninstall PSE, your photos will still be exactly where they were. Even if you uninstall PSE, its catalog information will still be intact, and a later version will pick it up and "convert it" to its own file system.
Support for PSE-3 has obviously ended, it's more than 5 years and 5 versions old. Just as a topic of conversation, my personal favorite version of PSE, is PSE-5. IMO, it's the fasest importing, the most reliable, yet it has a lot more bells and whistles than PSE-3. If you can find a usable copy, I'd grab it, especially for a computer running XP.
As to the out of memory issue there can be several issues that can affect this, for example; not enough RAM is allotted to PSE, this is independent of the amount of RAM actually installed in the computer. The scratch disc area is full or insufficient, the preferences file is corrupt.
Everybody is complaining about not being helped in this thread, yet no one has posted back as to whether they have tried Barbara's suggestions, or even if they understand enough about Windows file system to be able to begin to help themselves.

Out of memory error, possibly corrupted fs?

I just got my tour, and I love it. However I ran into a weird problem.
The desktop manager never show the BB messager as installed, then it tries to uninstall it. If I check the checkbox it installs over it and breaks it.
I was able to fix the messanger by reinstalling over the old one from the app store OTA.
Now, vilingo wont run, it throws an out of memory error. I've tried removing it and reinstalling it every way I can think of.
Also sometimes it takes 20+ minutes to reboot.
The crux of the matter is I could easily exchange it at this point, do you think I should or should I wipe it? any other suggestions?
Thanks,
Chance

No, not corrupted. You are out of memory..... just like a computer that is bogged down with too much stuff, your phone can only handle so much. The reason your apps keep disabling is most likely it is archiving them to make room for everything else you've got going. The biggest memory muncher is most likely pics or videos... as few as 5 or 6 pics and throw your phone off. The other thing you might be noticing is missing call logs, messages, or emails.... again, the phone is automatically clearing them out of memory (possibly before you[ve even had a chance to view them) to make room for everything else you've saved to it.
As far as startup times, again... MEMORY. the more files the blackberry has to scan through when it starts up (and it scans EVERY file EVERY time) the longer its going to take.
The solution for all of these issues is to get a memory card and use your desktop software to transfer all of the pic video and ringtone content to it. you can transfer one the phone itesself but its a time consuming process. after this is done pull your battery... startup still takes about 10 min on the tour but you should be ok. The phone will automatically save media to the SD card once its installed.

A FIX for error message: When I try to open Snood (it's a game) I get this message. Not enough memory {Error # :: 0, in sound.cp@line 101 Can you help?

After years of playing Snood, w/o problems, I started getting this error message, on my iMac, OS 10.5.8,
with 4 GB of memory when opening Snood: Not enough memory {Error # :: 0, in sound.cp@line 101
My MacBook Pro w. Mac OS 10.6.8 did not have this problem.
Initially I thought that Snood raised its minimum requirement to Mac OS 10.6.
I had several correspondences with Snood. Their tech support is great. Quick and thorough responses.
They thought the issue was in Mac's system preferences/ Sound. It was.
I didn't realize that my sound input and output devices were gone.
The fix was resetting the PRAM. I found this advice on MacFixIt.com.
MacFixIt help with volume: http://reviews.cnet.com/8301-13727_7-10415659-263.html
Resetting the PRAM is on Apple support: http://support.apple.com/kb/HT1379
My sound (music!) is back, along with Snood. So glad I reset the PRAM before reinstalling the OS software!
Thank you to Snood, MacFixIt and Apple.
Happy new year all!

Good work, nice post/tip, thanks!

Acrobat XI Pro "Out of Memory" Error.

We just received a new Dell T7600 workstation (Win7, 64-bit, 64GB RAM, 8TB disk storage, and more processors than you can shake a stick at). We installed the Adobe CS6 Master Collection which had Acrobat Pro X. Each time we open a PDF of size greater than roughly 4MB, the program returns an "out of memory" error. After running updates, uninstalling and reinstalling (several times), I bought a copy of Acrobat XI Pro hoping this would solve the problem. Same problem still exists upon opening the larger PDFs. Our business depends on opening very large PDF files and we've paid for the Master Collection, so I'd rather not use an freeware PDF reader. Any help, thoughts, and/or suggestions are greatly appreciated.
Regards,
Chris

As mentioned, the TEMP folder is typically the problem. MS limits the size of this folder and you have 2 choices: 1. empty it or 2. increase the size limit. I am not positive this is the issue, but it does crop up at times. It does not matter how big your harddrive is, it is a matter of the amount of space that MS has allocated for virtual memory. I am surprised that there is an issue with 64GB of RAM, but MS is real good at letting you know you can't have it all for use because you might want to open up something else. That is why a lot of big packages turn off some of the limits of Windows or use Linux.

Acrobat XI Pro "Out of Memory" error after Office 2010 install

Good Afternoon,
We recently pushed Office 2010 to our users and are now getting reports of previous installs of Adobe Acrobat XI Pro no longer working but throwing "Out of Memory" errors.
We are in a Windows XP environment. All machines are HP 8440p/6930p/6910 with the same Service pack level (3) and all up to date on security patches.
All machines are running Office 2010 SP1.
All machines have 2GB or 4GB of RAM (Only 3.25GB recognized as we are a 32bit OS environment).
All machines have adequate free space (ranging from 50gb to 200gb of free space).
All machines are set to 4096mb initial page file size with 8192mb maximum page file size.
All machines with Acrobat XI Pro *DO NOT* have Reader XI installed alongside. If Reader is installed, it is Reader 10.1 or higher.
The following troubleshooting steps have been taken:
Verify page file size (4096mb - 8192mb).
Deleted local user and Windows temp files (%temp% and c:\WINDOWS\Temp both emptied).
Repair on Adobe Acrobat XI Pro install. No change.
Uninstall Acrobat Pro XI, reboot, re-install. No change.
Uninstall Acrobat Pro XI Pro along with *ALL* other Adobe applications presently installed (Flash Player, Air), delete all Adobe folders and files found in a full search of the C drive, delete all orphaned Registry entries for all Adobe products, re-empty all temp folders, reboot.
Re-install Adobe Acrobat XI Pro. No change.
Disable enhanced security in Acrobat XI Pro. No change.
Renamed Acrobat XI's plug_ins folder to plug_ins.old.
You *can* get Acrobat to open once this is done but when you attempt to edit a file or enter data into a form, you get the message, "The "Updater" plug-in has been removed. Please re-install Acrobat to continue viewing the current file."
A repair on the Office 2010 install and re-installing Office 2010 also had no effect.
At this point, short of re-imaging the machines (which is *not* an option), we are stumped.
We have not yet tried rolling back a user to Office 2007 as the upgrade initiative is enterprise-wide and rolling back would not be considered a solution.
Anyone have any ideas beyond what has been tried so far?

As mentioned, the TEMP folder is typically the problem. MS limits the size of this folder and you have 2 choices: 1. empty it or 2. increase the size limit. I am not positive this is the issue, but it does crop up at times. It does not matter how big your harddrive is, it is a matter of the amount of space that MS has allocated for virtual memory. I am surprised that there is an issue with 64GB of RAM, but MS is real good at letting you know you can't have it all for use because you might want to open up something else. That is why a lot of big packages turn off some of the limits of Windows or use Linux.

Memory Error Neo2 Pt 4*512 DDR 400 or even 333

Ok, this board has started giving me a lot of problems. 1 week ago all was fine, and suddenly I started getting BSODs. Last friday the computer shut off after a BSOD, while I was just browsing the internet.
Affter that it failed to start and gave a BSOD on every boot.
Then it started automatically again. And woked well.
On sat the system wont start and gave long beeps, indiicating memory error.
4*512 Ballistix default spd.
so I reset my BIOS, upgraded bios to 1.A ballistix edition, as syar suggested.
Computer ran well / rebooted well.
but when I did a cold start sunday morning I got long beeps again. Even resetting the BIOS did help. Got long beeps.
I took 1 module out and the system started well. went into the bios and manually set bus to 333 rather than 400, default spd timings.
Computer started well. I put the 4th module back in, and all worked well till I did a cold boot today, and back to continuos beeps.
Now the only way the computer works if I just use 2 memory modules.
I tried manual voltage, manual timings, spd timings, timings on crucial's site, voltage on crucials site. No luck.
currently i am on 2*512 dimm 1-2, default spd and voltage and system seems to work.
whats the prob ? Is my memory bad, which I am not too sure off, bcos I tried running 2 modules at a time from the 4 matched pair, and tey seem to work.
Only the all 4 wont work, and 3 in also gives problem.
is this motherboard messed up ?
bcos I am really thinking of switching to a diff platform as since day 1, less than 1 month ago, this mobo is giving me probs with X2 dual core.

https://mywebspace.wisc.edu/phora/web/cpuz.htm
Alright, I updated the BIOS to the latest beta, modded by side effect.
put back the 4 modules in, and they are running now
2-2-2-7 DDR 400 2.8V
though the HT is 3x unlike all previos times when it was 5x...anything to do with the probs ?
anyways, I still dont know how long this config will last, for I have has successful bootups in the past, but they end up failing later.

Memory error on inventory scan

Similar Messages

Maybe you are looking for