Memory Error with iTunes 7 startup??

I just reinstalled EVERYTHING on my G4. Rebuilt the whole machine from the ground up on a new HD. Needed to be done anyway so I dont mind. My problem? When I try to launch iTunes 7 I get the Pref setup page and then an error. "I tunes does not have enough memory to launch" Check my mem I have ell over 80% available out of 1.2 Gig. Just after a fresh restart it will not open as the very first thing tried. I tried trashing all Pref files, I have everything updated to its latest. What could cause this? As it sounds there are so many problems with version 7 that maybe its not worth it to try and get it working. Maybe a revert back to vers 6 is better?
Thanks
Dusty

Me too.
Upgrading on my MacBook Pro went fine, but on my G5 running OS 10.3.9 I cannot launch iTunes 7.0.
First I am presented with a blank license agreement page.
I click Agree then I'm told The iTunes application could not be opened. There is not enough memory available.
I have over 1GB of free RAM. My boot drive has 33GB available.
MacBook Pro, Dual Core 2.16 Mac OS X (10.4.7) Keyboard protected with leather

Similar Messages

I continue to get r6025 runtime error with iTunes version 10.6.3.25. Have uninstalled and reinstalled twice. Happens when I search in iTunes Store. Ideas to fix?

I continue to get r6025 runtime error with iTunes version 10.6.3.25. Have uninstalled and reinstalled twice. Happens when I search in iTunes Store. Ideas to fix?

Hi,
got it fixed! My Son had both files on his Win7 iTunes installation. Never mind he had no issues whith ths iTunes and iPhone Sync. So I checked my other Win XP PC, where I don't have this problem syncing my ipad, and surprise. Both files do NOT show up on this PC. So I renamed the iTunesPhotoProcessor.exe I found under c:\program file\iTunes and synced again my iPhone and it went through without any error. So the problem might be and unremoved iTunesPhotoProcessor.exe or the missing iTunesPhotoProcessor.dll under the iTunes install root folder and this even if I had checked that the folder was completely removed during iTunes unistall.
Please try yourselve and just rename the iTunesPhotoProcessor.exe to iTunesPhotoProcessor.exe_ under c:\program file\iTunes or get a copy of the missing iTunesPhotoProcessor.dll and cp to c:\program file\iTunes.

I am running low on memory, 80% of memory is with iTunes...

I am running low on memory, 80% of memory is with iTunes, how do I move my itunes library to an external HD and empty space to my mac? I have 1TB to my mac, a 1TB time capsule - which has a 2TB HD interfaced to it.
I look into the files and see movies, music and itunes - all of these has my movies located in them (movies are 85%) of my itunes memory. I am not sure what files to move to an external HD - if this is the right move to make...
Any suggestions would be greatly appreicated.

Yes you can move your iTunes Library to an External HD, however to be safe you should back up your iTunes Library Drive with another Drive.
see > iTunes for Mac: Moving your iTunes Media folder

IPhone 3G 2.1 connection error with iTunes 8 on Windows Vista Enterprise

I was previously able to connect my iphone with my work computer (Windows Vista Enterprise) and it would recognize my phone. However, since I updated my iphone to version 2.1, it will not recognize the phone and gives me the following error message:
"iTunes could not connect to the iphone because an unknown error occured (0xE8000024)."
I am able to connect my phone with version 2.1 to my home computer running Windows XP SP2.
Any idea what may be causing the connection error in Windows Vista?

Hey TranceCadet,
This could be caused by a USB connection issue.
Make sure the iPhone is directly connected to a high speed USB port on the PC and not plugged into a hub, monitor, or keyboard. Disconnect any other USB devices, other than the keyboard and mouse.
This article has some general USB troubleshooting tips: http://support.apple.com/kb/TS1286
You may also want to disable or reconfigure any security software. This article will walk you through putting the PC in a selective startup mode, which will bypass most application conflicts.
http://support.apple.com/kb/HT2292
Jason

NI Pal Service Manager memory error on pc startup

Hello,
I have two XP-pc's with NI-488.2 (ver. 2.30) and MAX (ver. 4.0.0.3010) installed.
Both pc's give on startup an nipalsm.exe memory error (see attachment).
When starting MAX, (if no error) no installed hardware is shown.
On both pc's also McAfee Virusscan 8.00 is running.
What does nipalsm.exe (internal) that can cause this error ?
With thanks,
best regards,
Geert
Message Edited by GeertVN on 11-03-2005 12:55 AM
Attachments:
nipalsm error on pc loading.jpg ‏25 KB
nipalsm.exe info.gif ‏34 KB

Hi,
I have some suggestions for you:
Try the latest driver, version 2.4:
http://digital.ni.com/softlib.nsf/websearch/1DDE5C48F30C2C658625702000681295?opendocument&node=132060_US
---> Don't install the new driver over the other one. First remove the old one.
Are you testing the same GPIB card in both PCs? If yes, does the error occur without any cards plugged-in?
Try a Repair of MAX in Add/Remove programs
Make sure that you install first the driver without the card plugged-in.
Check if no firewall is blocking the nipalsm.exe. Maybe you can check if the error occurs when you have no McAfee software installed. (I don't think that the problem is caused by the MCAfee soft but I haven't tested it yet with the latest version)
Regards.
JV

Found New Hardware Error with iTunes and Motorola L7 SLVR

Hi,
I reinstalled iTunes because when I connected my phone via USB I would get an error in Found New Hardware Wizard: There was a problem installing this hardware. Motorola Motorola Phone USB Device. After reinstall, I opened iTunes and no error until it asked me to 'convert my phone for use with iTunes'. Once I said yes, it did something to the phone and then the error re-occurred. I am using the latest version of iTunes.
Shiff1

None of the steps outlined in the referenced document resolved the problem. In addition, simply connecting the iPod to the system now has the added effect of freezing my wireless connectivity. I can still get iPod connectivity to the system, but I'm offline until I reboot again (w/o the iPod connected).
When I try the second set of steps recommended in the attached note ("Disable conflicting System Services and Startup Items"), and had only the iPod selected, the system would not allow a complete boot up at all (kept sending me back to edit the System Services screen). It would then not allow me to restore the system to the selections that were previously on the computer. A mess!!
I ended up doing a complete system restore (back to a prior system configuration) and that corrected the problem. But, of course, I continue to get the error when booting up that "new hardware found".
Any other ideas?

How to fix Communications error with Itunes in FronRow

I've had the " An error was encountered while communicating with itunes" message whilst trying to play music in Fron Row.
I ran Apple support and they advised me to check on the settings for where the itunes library was located. I did this and stiil the error persisted.
After much searching I found the solution... Completely remove iTunes then reinstall it.
Heres how...
Drag the application's icon to the Trash. Open the /Home/Library/Preferences/ folder and look for one or more preference files named "com.apple.iTunes....plist" and drag them to the Trash. Look in /Library/ folder for an iTunes folder and if you find one drag it to the Trash. Look in /Home/Library/ folder for an iTunes folder and drag it to the Trash. Last, in /Home/Library/Preferences/ByHost/ folder look for two files with names com.apple.nnnnnnn.plist and drag them to the Trash.
Open Activity Monitor (Utilities folder) and in the process list look for iTunesHelper. Select it, then click on Quit Process icon. Quit or Force Quit the process. Now open the Accounts preference pane, click on Login Items tab, look for the iTunesHelper entry and select it, then click the "-" button and remove it from the list.
Empty the Trash. This should fully remove iTunes and its associated files/folders.
It works like a dream, the communication error has gone and I can play music once again. Hope someone might find this helpfull

I'm glad you found a solution that worked for you and appreciate your clear description.
It does seem a bit drastic, however. For others I would suggest at first trying one or both of these Apple support suggestions:
http://docs.info.apple.com/article.html?artnum=302533
http://docs.info.apple.com/article.html?artnum=93313

5002 error with iTunes 9.1 when updating apps

I'm getting a 5002 error whenever I attempt to update an individual app via a 'Get Update' button in iTunes on all accounts on the machine. The app still downloads, but the error dialog comes up every single time. This did not occur prior to an update to Mac OS X 10.6.3 and iTunes 9.1.
Anyone else having this problem or know of a fix? Note that I have already tried the following:
- Clean/reinstall of iTunes.
- Removal/re-add of all apps (and confirmation that even with iTunes only having one app 'installed' the same problem occurs).
- Update of account details.
- Removal and deletion of all ad-hoc builds/apps with 'generic' icons.
Full error message:
"We could not complete your iTunes Store request. An unknown error occurred (5002).
There was an error in the iTunes Store. Please try again later."
This doesn't happen with 'Download All Free Updates', but with multiple account downloads still broken, that button's only an option for me if the apps are for a single account.
Message was edited by: CraigG

The updates still download on my Mac, too - but the dialog is clearly something that shouldn't be there. Regarding the 'major version' error, that, as I stated, is down to multiple accounts. According to my communication with Apple, this is not intentional, but there's also not a timeframe for a fix. (This error started when the update screens started showing apps from all accounts, not just the one signed in.)

Error with iTunes "The iPod Group Storage cannot be used with iTunes...."

I bought a usb hub to accomodate my multiple usb devices. I plugged my iPod into this and got the following error:
"The iPod Group Storage cannot be used with iTunes because it is not formatted properly."
I plugged the iPod into the computer rather than the hub. Same thing
Tried to restore, per the error message's direction. It says it has restored it to factory settings, then it brings up that message again.
I uninstalled and re-installed iTunes. Same thing. It was playing fine but it needs re-charging now and it won't because of the error.
Does anyone have any ideas? I don't know what to do now.
Thanks.

Try to reset your iPod using the recovery mode as described in this support article
However, this will erase the iPod completely. If you have an iTunes-backup on your computer you can restore your iPod settings later from the backup.
I have never tried this in WIndows, however. The procedure might be slightly differeent.

PSCS4 Memory Error with Image Processor

When I use the image processor in PSCS4 to process a large number of raw files using ACR 5.1 (Nikon D3 NEFs), I consistently receive an error message after about 10-11 files have been processed that the instruction at 0x696336ab tried to read memory at 0x6C (or thereabouts) and the memory could not be read. I am saving as JPEGs with the color space set to sRGB.
I de-installed and reinstalled PSCS4, but the error persists. The image processor worked fine with PSCS3. A workaround that solves the problem is to process the files as a batch using a simple action to accomplish the task.
I am running Windows XP Pro Service Pack 3 with a dual Xeon processor and 2G of error correcting memory.

Hmm.. I was getting a similar error with CS3 and was very happy to find that it appeared to be cured in CS4. The CS3 issue would appear if I tried to process more then 100 NEFs. My workaround was to do them in smaller batches (60-75). Perhaps you might try reducing the memory alotted to PS or run it without any other apps running?
Russell

Memory Errors with NX4 and Adobe 3D

After installing the Adobe 3d trial version,I've had nothing but problems with NX4.Out of memory errors when there is plenty available.REinstalled NX4,same problems.Uninstalled adobe 3D,and the problem went away.We would like to purchase this,but not until this particular problem is solved.
Win Xp SP2
2 GB Ram
Dell Precision 370
Pentium 4
NX 4.0.0.25

are you working on big 3d models in nx4 ?(to check that, please do a right click on the windows task bar and open the task manager and check the memory used by nx4 with your 3d models loaded)- did the problem also occured with small models ?
if you memory footprint approaches the 2gb barrier, then 3d capture might be the cause ot your memory problems, to get rid of it, just open acrobat3d and go in the menu edit/preferences/3d capture and delete nx4 from your list of capturable applications.

Out of memory Error with jdk 1.6

Hello,
I have a swing application launched on the client with the help of Java web start. The applications works fine in jre 1.4 and jre 1.5. The heap sizes are :
initial-heap-size="5m" max-heap-size="24m"
But when I run this using jre 1.6.0_05-b13, I am getting Out of memory Error, java heap size. And I see the memory usage is growing rapidly which I didn't notice in other jre versions (1.4 and 1.5).
Does anyone have any idea on this?
Thanks in advance,
MR.

Thanks for your response Peter. During my continuous testing I identified that error happens on jdk 1.5 also. And I have increased the min-heap-size to 24 MB and max-heap-size to 64 MB. But in that case also I noticed the out of memory error. The interesting thing is, the min-heap-size is never increased from 24MB and lot of free memory also.
Memory: 24,448K Free: 12,714K (52%) ... completed.
The Outofmemoryerror triggers from the reader thread which does the job of reading the data from the InputStream. One thing is we are continuously pushing more data on the output stream from the other end. Is that any limitation on InputStream which can hold some definite amount of data.
Please throw some light on this.

Error with Itunes store.

I'm having trouble with itunes latly. I can access my account but can't get to the home menu or music est. I also can connect my ipod.
I've recently updated to version 10.4.
I've run a diagnostic and this is what came up:
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
Alienware Aurora
iTunes 10.4.0.80
QuickTime 7.6.9
FairPlay 1.12.20
Apple Application Support 2.0.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.2 (333.2)
Gracenote SDK 1.9.1.485
Gracenote MusicID 1.9.1.102
Gracenote Submit 1.9.1.133
Gracenote DSP 1.9.1.43
iTunes Serial Number 00DEAAA80EF78510
Current user is not an administrator.
The current local date and time is 2011-07-28 15:45:33.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 5670
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.4.0.80 (x64) is currently running.
iTunesHelper 10.4.0.80 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    {DE15643F-6F47-4B90-9DE2-80C47FBD1C9C}
Description:    Killer Xeno NDIS EDGE Interface
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    Yes
DHCP Server:
Lease Obtained:    Wed Dec 31 17:00:00 1969
Lease Expires:    Wed Dec 31 17:00:00 1969
DNS Servers:
Adapter Name:    {D88B6FD4-4703-474B-94BA-723492D738D7}
Description:    Broadcom NetLink (TM) Gigabit Ethernet
IP Address:    192.168.1.100
Subnet Mask:    255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:    Yes
DHCP Server:    192.168.1.1
Lease Obtained:    Thu Jul 28 04:27:18 2011
Lease Expires:    Fri Jul 29 04:27:18 2011
DNS Servers:    24.116.2.50
        24.116.2.34
Active Connection:    LAN Connection
Connected:    Yes
Online:        Yes
Using Modem:    No
Using LAN:    Yes
Using Proxy:    No
SSL 3.0 Support:    Enabled
TLS 1.0 Support:    Disabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-07-28 15:42:54.
I just want to know if it's just me or if the store is down itself?

I have been recieving the same error for the last three days (Feb '08) I can access every part of the iTunes store except shopping cart. I get the same message on two different PC's.
I have been using Shopping Cart as a "wishlist" and really dont want to have the contents cleared as I cant remember everything I've put in there. This bug seems fairly prominent on Apples part based on the number of posts about it in the forums.
Can someone point me to a good source of info on a fix for this?

There is not enough memory error with 8gb installed

Description:
I'm getting an error when trying to copy or cut a collection of basic shapes in CS6 on Mac OS X 10.8.
It reads:
There is not enough memory to complete the operation.
To increase available memory, close other open documents or applications.
But when i check activity monitor there is plenty of memory available. I can succesfully copy a smal(ler) amount of shapes.
Steps already taken:
Tried copying after a system restart with no other programs running.
Tried adding more memory (i had 4gb originally, I just upgraded to 8gb).
I reinstalled Flash
I tried the same procedure (copying the same amount of shapes) on another machine with a similar amount of RAM and this works fine.
Is there a way you can allocate more memory to flash, or is this some setting that i'm missing?
Any help would be greatly appreciated!
P.s. I read this thread http://forums.adobe.com/message/3609214#3609214, and my problem is only different in that i don't have some huge files i'm dealing with. The .fla is only ~10mb.

Thanks for chiming in Mataxia.
One thing you can try is selecting the layers that have the shapes you want to copy. Then right click and choose copy layers. In my case this works even though selecting just the shapes (instead of the layers) will cause the memory error.
I'm using this as a workaround, but i can imagine that this isn't of any help in all cases.
This confirms my suspicions that this is a bug in flash. Would be great if someone from Adobe were reading this...

App Install error with iTunes 7.7 (Facebook and MySpace Apps)

Whenever I try to sync either the Facebook or MySpace apps from the App Store, I receive the following error:
The application "Facebook" was not installed on the iPhone "Ray's iPhone" because an unknown error occurred (0xE8000013).
and
The application "MySpace" was not installed on the iPhone "Ray's iPhone" because an unknown error occurred (0xE8000013).
I've tried deleting and redownloading the apps multiple times. Anyone else had this problem or gotten around it?
Thanks - Ray

I downloaded a few free apps also and it didn't take. When I tried downloading it again it said that it's already downloaded and I have to sync the phone up with iTunes and click Store -> Check for purchases.
Well I did that, but the Store is still down so it didn't sync it with the phone. I'll keep trying.

Memory Error with iTunes 7 startup??

Similar Messages

Maybe you are looking for