Memory fault(coredump)

Folks,
I need some tips on Memory fault(coredump).
What is meaning of this and explain in bit.
i am getting below error and advive me where to check
/path/ TRME_M.prog[22]: 22343 Memory fault(coredump)
unable to open file "test.sql" Invalid option. Usage: CONNECT <username> [AS SYSDBA|SYSOPER]
Thanks in advanced.
Seetha.

Hi;
I need some tips on Memory fault(coredump).
What is meaning of this and explain in bit.
i am getting below error and advive me where to check
/path/ TRME_M.prog[22]: 22343 Memory fault(coredump)
unable to open file "test.sql" Invalid option. Usage: CONNECT <username> [AS SYSDBA|SYSOPER]What is your Db version? Please check below note:
TECH: Getting a Stack Trace from a CORE file [ID 1812.1]
If you can not get details i suggest use
STACKX User Guide [ID 362791.1]
Regard
Helios

Similar Messages

Import terminates with error Memory fault(coredump)

Hello All,
I am trying to import the data from 9.2.0.8 to 10.2.0.4 on HP UX 11i.
After some times i get error
Memory fault(coredump)
and import job gets disconnected. There are no other logs/ errors reported even at the db level nor at import job.
Request to help if some body knows about the cause.
Thank you,
Anil

Hi,
I'm also experiencing this error.
Some info on my databases
[EXP]
Version: 9.2.0.5.0 - 64bit Production
Character Set: US7ASCII
National Character Set: AL16UTF16
[IMP]
Version: 9.2.0.5.0 - 64bit Production
Character Set: US7ASCII
National Character Set: AL16UTF16
[Common]
Machine Type: HP-UX B.11.11
The import job terminates and leave a file named core which is sized to the amount i placed in the buffer. How do i proceed on this one? Thanks.

SOA server Memory fault

Hi ,
we got the following error from SOA server
<Oct 1, 2013 11:46:12 PM EET> <Warning> <JTA> <BEA-110486> <Transaction BEA1-4D0912FE2D411AD3416B cannot complete commit processing because resource [FNViewDS_soadomain] is unavailable. The transaction will be abandoned after 54,201 seconds unless all resources acknowledge the commit decision.>
<Oct 1, 2013 11:47:12 PM EET> <Warning> <JTA> <BEA-110486> <Transaction BEA1-23D6FEB4AD3C1AD3416B cannot complete commit processing because resource [FNViewDS_soadomain] is unavailable. The transaction will be abandoned after 57,467 seconds unless all resources acknowledge the commit decision.>
<Oct 1, 2013 11:47:12 PM EET> <Warning> <JTA> <BEA-110486> <Transaction BEA1-4D0912FE2D411AD3416B cannot complete commit processing because resource [FNViewDS_soadomain] is unavailable. The transaction will be abandoned after 54,141 seconds unless all resources acknowledge the commit decision.>
<Oct 1, 2013 11:48:12 PM EET> <Warning> <JTA> <BEA-110486> <Transaction BEA1-23D6FEB4AD3C1AD3416B cannot complete commit processing because resource [FNViewDS_soadomain] is unavailable. The transaction will be abandoned after 57,407 seconds unless all resources acknowledge the commit decision.>
<Oct 1, 2013 11:48:12 PM EET> <Warning> <JTA> <BEA-110486> <Transaction BEA1-4D0912FE2D411AD3416B cannot complete commit processing because resource [FNViewDS_soadomain] is unavailable. The transaction will be abandoned after 54,081 seconds unless all resources acknowledge the commit decision.>
/appserv/MW/user_projects/domains/soadomain/bin/startWebLogic.sh: line 179: 10673: Memory fault(coredump)
after this memory fault server shutdown
any one can help to find the root cause of that error
Thanks

hello, are you using the correct JDK version?
if you are using SOA 11.1.1.5 or 11.1.1.6, to use JDK 1.6
Verify your version with:
$java -version

Windows quicktime- memory faults causing non-response on 720p video MJPEG codec

windows vista 64 home premium
nvidea evga gtx260 with latest drivers
4 gb ram (2.5 gb free)
code 2 quad Q9950 yorktown processor at 2.83 ghz
more Hard drive than i will ever use....
trying to play HD 720p video recorded on casio camera.
Quicktime pro is using only 1 processor about 30%, 720p video
in motion jpeg codec is skipping and slow.
the only reason i can find is that resource monitor is
showing quicktimpro to be generating 2300 hard memory
faults per minute when it's trying to play the video.
anybody else seen this? is this someting that Apple
has to fix? My computer seems to be fine with other
applications.
thanks

Oddly enough, when I disable Avast! antivirus, the problem dissapated. Somewhere in there though the read logic from quicktime is probably flawed. It needs to read bigger blocks or something like that for HD video. Never have seen this problem for non-HD. I noticed that searchindexing goes haywire with tons and tons of reads and like 10+ sessions when quicktime is reading an HD video file. I disabled indexing on the drive and For now, I disable Avast! to use it.

Memory fault while using impdp

I'm unable to import a database using impdp; as soon as I start the impdp cmd it errors out with a memory fault
I was able to previously import 1 TB out of a total of 3 TB, and then got an error related to the new MEMORY_TARGET parameter, complaining about insufficient tmpfs.
I resolved that error, and then after that I can't invoke impdp without the memory fault error as described below..
$ nohup impdp "'/ as sysdba'" JOB_NAME=LANCE_FULL_01 parfile=auexpdp.dat &
[1] 32118
$ nohup: appending output to `nohup.out'
[1] + Memory fault nohup impdp "'/ as sysdba'" JOB_NAME=LANCE_FULL_01 parfile=auexpdp.dat &
$
I also get the following error in the import log
ORA-39012: Client detached before the job started.
This is what my parfile looks like
directory=dmpdir
dumpfile=aexp1_%U.dmp,aexp2_%U.dmp,aexp3_%U.dmp,aexp4_%U.dmp
parallel=8
full=y
exclude=SCHEMA:"='MDDATA'"
exclude=SCHEMA:"='OLAPSYS'"
exclude=SCHEMA:"='ORDSYS'"
exclude=SCHEMA:"='DMSYS'"
exclude=SCHEMA:"='OUTLN'"
exclude=SCHEMA:"='ORDPLUGINS'"
include=tablespace
#transform=oid:n
logfile=expdpapps.log
trace=1FF0300
Has anybody seen this type of error before ?
Thanks

Pl post details of OS and database versions
>
$ nohup impdp "'/ as sysdba'" JOB_NAME=LANCE_FULL_01 parfile=auexpdp.dat &
>
You should not use '/ as sysdba' for expdp/impdp - use SYSTEM account instead - see the first NOTE sections in these links
http://docs.oracle.com/cd/E11882_01/server.112/e22490/dp_export.htm#i1012781
http://docs.oracle.com/cd/E11882_01/server.112/e22490/dp_import.htm#i1012504
HTH
Srini

Memory fault error while converting .fmb to .fmt

Hi all,
When I tried to convert .fmb file to .fmt(text format) file in unix its giving me Memory fault error.
Command I am using is
f60gen module=INTG_TEST.fmb userid=apps/xxxxxx@DB1 forms_doc=yes batch=yes
Where as from form builder I can do it without any error Administration->Convert->
Can anybody please let me know ?
Thanks,
Dev

Thanks... But when i use parse=yes its creating .fmx
able to generate .fmt for some .fmbs with forms_doc=yes its not working for some .fmbs
I am using forms 6.0.8.11.3 with linux 2.6.9-78.0.13.0.1 ab
Pls. let me know if there is any other way to generate .fmt
Thanks

SQL*Loader memory Fault

SQL*Loader runs fine when I am running using my login. However when I use a different login I get Memory fault error. Please share any thoughts if had experience this problem or any insights into what might be causing this problem
Thanks,
Pedapuli

The following is in the log:
SQL*Loader: Release 9.2.0.3.0 - Production on Thu Sep 7 11:44:06 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Memory fault

Segmentation Fault(coredump) ...please help me

I have an application running under C / Pro C in Solaris and I have a program, it insertes rows automatically into a database (oracle) and generes a file in /tmp whith the information inserted, but whit some users the program sends an error message "Segmentation Fault(coredump)". what is the reason for this error messages...?
the reason is user privileges or other reason?

The problem could be a bug in your code or in our compiler. You will need to get a stack trace under dbx to see what caused the SEG-FAULT.

Memory fault trap handler

I apologize in advance, as this is not strictly
kernel related, except for trap handlers...
I get a SIGBUS casting sockaddr to sockaddr_in,
but only if sockaddr was declared on the stack.
I am using Forte C/C++ for Sparc WS6U2.
Getting right to the point, is there a way to have
the compiler strictly align structs declared on the
stack, similar to malloc always returning strictly
aligned memory?
Is there any other workaround, other than using
-misalign (bad performance), or fixing each and
every instance of a struct on the stack?
When -misalign is used, can somebody confirm
that a kernel mode trap handler is used to catch
the memory fault and interpret byte-wise access
instead of the usual SIGBUS?
What is the name of the trap handler that would
generate the SIGBUS due to bad alignment?
How can it be observed with dbx, or is that
impossible?
Where are trap handlers documented?
Please also see "need CC flag to align structs on stack"
in the Forte C++ compiler discussion forum for more details.
Thanks in advance,
-Ralph

Some partial answers to my own questions...
Trap handling exists and is architecture specific. In at least some
cases, the trap handler is known as #6. There is a paper on trap
handling by Jim Moore: ftp://ftp.warwick.ac.uk/pub/solaris2/traps
However, I am still curious about the hope for a cc flag that would
align structs declared on the stack, similar to malloc'd memory.
Did, does, will such a thing exist for Forte C/C++?
-Ralph

Memory Fault Error While Installing WebLogic

Hi,
I am getting Memory Fault error while installing weblogic on RHEL 5.2 (Tikanga). The file I am using to install weblogic is
server103_linux32.bin.
When I run command uname -a, following information is displayed:
Linux Machine1 2.6.18-92.e15 #1 DATE x86_64.
Some of you may think that I am using 32bit version instead of using 64bit as per my machine but On oracle website, there is only one
version available which is the one I am using.
Kindly help.
Cheers
Sunny

Kindly refrain from using a 32-bit installer on a 64-bit system. Kindly contact a Weblogic forum for more assistance.

Mi_ReturnCodeStatus=139;mt_Status=Memory fault while RSSBBB00 execution

I am getting following error in the log while executing the sample program RSSBBB00
mt_ReturnCodeStatus=139;mt_Status=Memory fault
(ACC): resources release
END PHASE LODVCUST AT 2012/03/30 10:51:30 (RC=SKIL, JOBRC=SKIL, ELAPSED=1)
BEGIN PHASE END_JOB AT 2012/03/30 10:51:03
(ACC): resources release
END PHASE END_JOB AT 2012/03/30 10:51:30 (RC=C000, JOBRC=SKIL, ELAPSED=0)
JOB ENDED ABNORMALLY WITH CODE (SKIL) AT 2012/03/30 10:51:03
Can anyone please advise how to resolve this issue?
Thanks.

Thanks! I had already tried the wiki article about disabling crash dumps and it didn't help! Also, I don't have access to previous logs anymore since "buhman" on [email protected] suggested I remove /var/log/journal directory which solved the problem for now (I waited for a few days before reporting to make sure I don't get freezes).
Also, he had this to say: "feel free to mention that even crap like buhDB is a better implementation of a binary log database"
I'll see when the freezes happen again (or if they do at all) and report back if it happens again.
Thanks!
Last edited by fengshaun (2014-10-12 04:01:42)

Can memory faults be a big problem?

I'm wondering if memory faults
a) do impact operation of an in-memory DB (and can hard- and software provider prevent it)
b) have a larger impact on in-memory DBs than on disk-based DBs
See related links:
http://en.wikipedia.org/wiki/Memory_tester
http://en.wikipedia.org/wiki/Error_detection_and_correction#Error-correcting_memory

In addition to the possibility Zeeshan mentions of keeping multiple copies in RAM, it is important to note that at least for BWA, RAM is not the primary datastore. All data is written to disk. Data is then loaded into RAM from the disk-based store when it is needed. Hopefully there is room in the RAM for all data to be loaded at all times, but BWA does not require that this is the case. I call this caching, but some disagree with that definition.
I assume, but do not know, that this is the case with HANA and the ICE as well and that all writes are logged to disk so that there is no data-loss in the event of a power or hardware failure.
The way that most in-RAM storage systems achieve transactional persistence is by writing a sequential log file (called a write-ahead-log) and flushing the log file to disk. The log file records each transaction before the client is notified that the transaction is complete. This log file can then be used to reconstruct the most recent state of the database in the event of a failure. At some point the full dataset at a point in time is reconstructed on disk, usually based on the representation in RAM, and then the log file up to that point can be discarded.
Cheers,
Ethan

6732 Segmentation Fault(coredump)

We are getting an error: 6732 Segmentation Fault(coredump) occasionally. We run a batch file from Unix and when calling a PERL script, we get the error. any ideas what could be causing this error?

I believe this error generally indicates a user process died. It then generates a coredump to let you analyse why it died. Mostly it is not that serious. You are probably need to check the unix and perl scripts for possible errors.

Memory fault (core dumped) Pro *C/C++

Hi,
unfrt $ORACLE_HOME/precomp/demo/proc, I modified the file demo_proc.mk adding f1 as follows:
SAMPLES=f1 sample1 sample2....
anything else is not changed.
$ make -f demo_proc.mk f1
f1.c f1.o f1 all are generated with no error
$
$ f1
connected to ORACLE as user: scott
Memory fault (core dumped)
$
I don't know why, I used gdb to debug, but it says:
529 ../i386/i486/bits/string.h: no such file or directory.
what a nut!
could someone can give me a hand!?

Trilby wrote:Lets stick with the first example. How are you compiling it?
Thank you for being here while I was just .. unfortunatelly, dumb.
I increased the list size (column count) without adding additional type (G_TYPE_STRING) arguments.
Fixed that and everything's back to normal.
drcouzelis wrote:Are you compiling with debugging information on? ("gcc -g")
Compiling with -g doesn't reveal my mistake.
Last edited by EUR (2014-01-02 20:43:28)

Error ".profile[27]: 54214 Segmentation fault(coredump)"

When I try to telnet into my AIX mainframe I get the following error.
".profile[27]: 54214 Segmentation fault(coredump)"
Does anyone know why terminal.app returns this error? I am clueless.
It has never worked. I have tried terminal emulation programs to no avail. It seems that I can not get into it from an apple computer? Is there another way other then telnet to get in?

You could try to comment out any commands you think are unnecessary by inserting a hash mark (#) in the beginning of the line in question.
To allow you to login, you can rename the file out of the way with "mv .profile dot-profile" if you can access the remote system.
The minimum contents for a .profile are really non-existent, you shouldn't need to have a .profile file at all, it's only for convinience that it exists. Bournish shells run that file for "login" shells.
When you have access to the remote system, open two terminal windows, display the .profile file's contents in one, and cut and paste the lines one by one into the other.
What did the file command tell you about the core file?
I'll be gone for a few hours, but I'll check in later.

Memory fault(coredump)

Similar Messages

Maybe you are looking for