"Memory Full" error when changing page setup

I'm running Crystal Reports 2008 and yesterday I had two landscape reports begin doing some weird things:
Symptoms:
-Any change to the Page Setup dialog throws the Memory Full error (even just bringing it up and clicking ok)
-The reports were created as landscape but are displaying as portrait in Page Setup and in design view
-A handful of fields are displayed without text in them. If I delete these fields, save, and re-open other fields will not display information (in design view)
Troubleshooting:
-If I remove ALL fields from the reports, save, and re-open the report tells me I have an invalid printer but will allow me to change Page Setup.
*While this works, I really do not want to create the reports again from scratch.
-I have tried removing and re-installing Crystal 2008 with no luck. However, it remembered my recently opened reports which makes me think the uninstall didn't remove everything.
-I have rebooted to make sure all memory available is free.
Does anyone have troubleshooting ideas for me? Thanks in advance.

The link takes me to a page saying "The system cannot find the file specified. " I also tried downloading the .exe version and got the same result.
I was able to find an SP3 download but after unpacking the files and selecting my language I get a message "Crystal Reports 2008 SP3 Update can not install because the version of the product on the system is too low."
I downloaded the SP3 file from here: http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReports2008-VersionandDownloadinformationforSPsand+FPs
I also tried this one with the same effect: Crystal Reports 2008 Reference [original link is broken]
I assume I downloaded an update as opposed to the "full version", is there another full version available somewhere?

Similar Messages

Memory Full error when using Main Report Preview in VStudio 2010

Framework 4.0.30319
VStudio 10.0.20.219.1
SAP Version- 13.0.2000.0
CR 2008 on local machine- 12.2.0.290
I don't get memory full error when I run the report with my locally installed cr 2008. If I go into my visual studio and do a main report preview I get memory full error.
I get this error running same report in cr 2008- MochiKit is undefined. An error has occurred in the script on this page. file:///c:/Program%20(x86)Business%20Objects/Common/4.0/Crystalreportviewers12/js/crviewer/html.js
I can get past that error and report works fine. I can take the rpt file in vs2010 and it runs from the aspx page with the viewer. But I ca't do a preview from the editing of the rpt file.
Any way to trouble shoot where the memory problem is when doing a preview? Makes it really hard to test other dlls when it does this.

Are you a Developer or QA or end user? Have you discussed this with your Developer at all? We seem to keep going around in circles. Your Developer should know what he did and how to deploy your app and CR assemblies and what to use.
Subject line is VS 2010, CR for VS 2010 is the only version supported in VS 2010. CR 2008 doesn't have 64 bit runtime. therefore it's not an option, your WEB Servers app pool MUST run in 32 bit mode only if you are using CR 2008.
"If I install the 64 bit version of SAP CR. Should the assembly change in the aspx files? different version number?" Nothing in your app, just deploy the 64 bit runtime and set your app pool to run in 64 bit mode.
If you are using CR for VS 2010 then you can run your WEB server in 64 bit mode and use CR for VS 2010 64 redist files on your WEB server. Then all DB Drivers, Printers and anything else MUST be installed in 64 bit versions. This includes what ever dependencies your UFL has, they too must also support 64 bit platform.
NO Additional requirements to be done or used for 64 bit WEB applciations, just requires IIS App Pool to be run in 64 bit mode and all dependencies available in 64 bits. ODBC DSN is created using the 64 bit ODBC Administrator, Printers support 64 bit applications.
And your UFL and any of it's dependencies must be located in as well as GAC'd if it's required, once again check with your UFL developer:
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64
I suggest you purchase a support case and work with one of our Rep's to sort this out.
http://store.businessobjects.com/store/bobjamer/en_US/DisplayCategoryProductListPage&CategoryID=55987300
Don
Edited by: Don Williams on Oct 20, 2011 1:35 PM

Memory full - error when open a Peoplesoft crystal report 9/10

Post Author: damisetty
CA Forum: General
Greetings!
We are gettign Memory Full error when open few of the delivered crystal reports. We are using Crystal 9 bundled with peoplesoft, i tried to open with Crystal 10, but same error.
Could any one help me out?
Thanks in advance.
Naga

Are you a Developer or QA or end user? Have you discussed this with your Developer at all? We seem to keep going around in circles. Your Developer should know what he did and how to deploy your app and CR assemblies and what to use.
Subject line is VS 2010, CR for VS 2010 is the only version supported in VS 2010. CR 2008 doesn't have 64 bit runtime. therefore it's not an option, your WEB Servers app pool MUST run in 32 bit mode only if you are using CR 2008.
"If I install the 64 bit version of SAP CR. Should the assembly change in the aspx files? different version number?" Nothing in your app, just deploy the 64 bit runtime and set your app pool to run in 64 bit mode.
If you are using CR for VS 2010 then you can run your WEB server in 64 bit mode and use CR for VS 2010 64 redist files on your WEB server. Then all DB Drivers, Printers and anything else MUST be installed in 64 bit versions. This includes what ever dependencies your UFL has, they too must also support 64 bit platform.
NO Additional requirements to be done or used for 64 bit WEB applciations, just requires IIS App Pool to be run in 64 bit mode and all dependencies available in 64 bits. ODBC DSN is created using the 64 bit ODBC Administrator, Printers support 64 bit applications.
And your UFL and any of it's dependencies must be located in as well as GAC'd if it's required, once again check with your UFL developer:
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64
I suggest you purchase a support case and work with one of our Rep's to sort this out.
http://store.businessobjects.com/store/bobjamer/en_US/DisplayCategoryProductListPage&CategoryID=55987300
Don
Edited by: Don Williams on Oct 20, 2011 1:35 PM

Memory full error when trying to access 'access po...

Hi *,
I am using the wlan feature of my lovely e70 quite a lot. Therefore I have quite a lot off access points defined. Now I try to go to the 'access points' and I get a memory full error.
About a month ago I updated to 3.0633.09.04 (german). With 2.x I had the same problem - after a while of filling up the list I could not access it anymore, even to delete entries.
Any ideas on how to proceed? External tools?
Cheers,
Joerg

The error happened because you have defined or accessed a large number of access points with the device. I tend to access a large number of different AP's with my E65's WiFi. Details of each WiFi or edge or hsdpa access point you connect to is stored in that list. Hence, I got this error once.
I got out of that mess by doing the following:-
1. Go to web browser settings
2. In "access point" select "user defined"
3. Then, the device will provide you with a list of all the access points you have defined and ask you to select the default access point.
4. At this point, you can start deleting some of the access points. (Options -> Delete after selecting any ap in the list)
5. After you have deleted some of the access points, you won't have the memory full error you encountered.
This is certainly an inconvenience. One way to avoid this issue is to manually pare down the access point list once in a while. Delete some of the access points that you use very infrequently or never again.

Memory Full error when opening Opera & Mobile brow...

while using t opera mobile and my mobile's browser, sometimes it says that the memory is full close some applications....y ?
Moderator's Note: The title has been changed as it was moved to a more appropriate board.

Open Opera Mobile and in Options-->Settings-->Privacy... Clear the Cache.. Do that on a regular basis (say before exiting every session of using the Browser) and see if the problem persists..
Moderator's Note: The title has been changed as it was moved to a more appropriate board.

WIS 30280 - Webi Server Memory Full Error

We are getting "WIS - 30280 - Webi Server memory full error" when a report is scheduled in XI R2. When the same report is refreshed it works fine.
Restarting webi didnot help the issue. I have searched in various forums about chaning the registry entry but in vain.
Please suggest where to go next.
Thanks

Hi
do you have other WebI reports which can be scheduled without a problem?
Can you please check the memory consumption of the WebI report and the WebI job servers while the report is run (through the scheduler).
Can you consider updating to SP5?
Regards,
Stratos

Memory full error...when it isn't

Since updating to Belle I've been receiving a lot of "memory full" messages in a variety of applications, often with barely anything else running on the phone.
I've done a fair bit of testing to try to narrow down the culprit but I'm coming around to the conclusion that it's Belle, not the apps.

I do almost no browsing.
My unscientific narrowing down comprised of:
Reformatting N8
Installing Belle
Installing a few apps
Memory full error occurs after one or two days
I thought it might be Swype (from Beta Labs) so didn't install it one time but still got memory full.
I thought it might be Maps Suite 2.0 (from Beta Labs) so didn't install it one time but still got memory full.
I thought it might be IMO (as it's not officially available for Belle) so didn't install it one time but still got memory full.
Apps that I consistently install are:
Cutebox
Store
DLNA Play (Beta Labs)
ScreenSnap
Opera
GoogaSync
Battery Info
...and I also have two email accounts which check every 15 mins.
I have three homescreens:
1.
Calendar (official one line version)
Fourteen app shortcuts
2.
Two email widgets
3.
FM transmitter widget
DLNA Play widget
Music player widget
Four app shortcuts
Battery Info widget
I should have just included screen grabs, lol!
Sometimes the memory full message appears when I'm doing something big, like starting maps or camera or calendar (never photo gallery though), but other time it happens while doing something small like switching homescreen or backing out of an application, but the strange thing is that when I check memory status (RAM, not the C: drive) I find that there's plenty free.
Anyway, homescreen grabs attached.
Attachments:
Scr000008.jpg ‏88 KB
Scr000009.jpg ‏61 KB
Scr000010.jpg ‏100 KB

Memory full error message when battery is low

(Ive done a check and cant find anything similar)
I have an E71 and keep getting "memory full" error messages ONLY when the battery is low. I have 109 free memory out of 119, and when I connect to the USB it says it doesnt recognise it, so I cant save anything to computer, not that there is anything on there.
The problem is, because it says MEMORY FULL, it wont recharge, even when the charger is plugged in and switched on. Which means basically the phone is useless.
I think this has to be a softwear problem and not a Ive-misused-it-problem because the MEMORY FULL ! message comes up only with low battery.

Hi have you checked if your 920 memory is full via the Settings > Phone Storage to ensure that your 920 has got enough memory? Otherwise, have you checked your car stereo itself (is it a model that has built-in flash storage or hard drive storage) for its memory capacity?

Error when accessing Page Layout

I created a basic report with a number of columns. I want to make it a landscape layout and so go to File->Page Setup when I do I get a "Out of Memory" error. The page setup comes up and if I click on anything other than cancel, I get an "An invalid Argument was encountered"
If I try to print the report I get a "CRW32.exe has encountered a problem and needs to close...." after that it closes everything CR.
--Tom

Hi Tom,
Regarding Crw32.exe error message:
Try with this:
1. Reduce the 'Hardware acceleration' setting in Microsoft Windows.
2. To access the 'Hardware acceleration' setting in Microsoft Windows:
Click Start > Settings > Control Panel > System > Display > Settings > Advanced > Troubleshooting.
There are typically six possible settings for 'Hardware acceleration': from 'None' to 'Full'.
If you are using Dual monitor run the CR application on primary monitor cause Dual monitor is not tested with Crystal Reports.
Regards,
Shweta

Memory Full Error in Crystal Reports Viewer

Environment:
Windows 7 64 Bit
Crystal Reports for Visual Studio Version 13.0.13.1597
SQL Server Database
Connecting with OLE BD (ADO)
I am previewing a report in the Crystal Reports Viewer and it instantly returns an error pop-up "Memory Full". When I run the report in the runtime environment on the same machine everything is fine. Other reports will run in the viewer. There seems to be a problem with just this one. This Report runs on a different machine with the same setup other than it is running 13.0.8.
I tried upgrading from 13.0.8 to the version above and there was no difference.
Any ideas?
Thanks,
Koby

Use Modules or ProcessMonitor and compare what is missing between your DEV PC and Runtime Only PC.
May give you a clue as to what is missing or if it's permissions, DB client or third party dependencies.
Windows or WEB App?
Don

"memory full" error while saving. Can I recover VI?

While I was saving a VI, a "memory full" error is occurred. I tried to
save again and there was no other error. Now, when I try to open the
VI, the error dialog: "Labview load error code 16:Could not load data
space link information" appear. It seems that I lost all my work, but
there is a method to recovery the VI?
Thanks to all for any suggestion.
Max

"Only another question. My computer has 1GB RAM and I seen in windows task manager, after the memory problem, that LV used about 400MB of memory and there was still 300MB of free RAM(the other RAM was used by .othr programs).
Memory full is the erro returned if LV attempts to allocate memory and it can not. When allocating, the memory MUST BE CONTIGUOUS!
Warning: The following may change version to version and is based on my observations.
As i understand it, LV will enusre a buffer is larege enough to handle new data before the data is added. If the buffer needs expanded. LV will DOUBLE (Note: My understading, NOT known to be true) the size of the buffer. Under this scheme, if your buffer was 200MB and needed expanded, LV would have to acquire a block of 400MB from the OS.
Just my understading....
If someone knows better, please chime in.
Trying to help,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Memory full error with printing pdf

Occasionally I get a memory full error with printing pdf (Cmd-P - then use save PDF on lower left dialog screen). This is when just printing a few pages.
Why Am I getting this and how can I fix this?

I am not sure why but I have noticed some Adobe products when used to convert html documents (web pages) to pdf, can produce very large files.
Try using Apple's Preview to see if those 'memory full' messages still occur.
I am presuming you have plenty of free hard drive space and also sufficient RAM so suggesting it is an application bug about memory that is at issue and not actually a lack of physical memory.

XI3.0-WEB INTELLIGENCE SERVER MEMORY FULL - ERROR (WIS -30280)

Hi All
when i try to open the webi report i get error
WEB INTELLIGENCE SERVER MEMORY FULL - ERROR (WIS -30280)
JAVA Deployment and XIR2 Edit the webi.properties file :
1) Go to windows explorer.
2) Go to C drive (or wherever your Tomcat is installed) c:\programfiles\Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\WEB-INF\classes\webi.properties
3) open this file webi.properties with a notepad and add MAX_HEAP_SIZE=1024000000 as the bottom most line of the file.
4) Save the file.
5) Restart the tomcat server and webi as well.
(This works for xir2 and this is not the permanent fix I guess)
For Xi3.0 : XI3.0-WEB INTELLIGENCE SERVER MEMORY FULL - ERROR (WIS -30280)
Cause
The error message appears because the Web Intelligence server stresses the memory resources when processing many reports containing a large amount of data.
Resolution
To resolve the error message, it is necessary to increase the memory heap size value. Complete these steps:
Click Start > Run. The Run dialog box appears.
Type "regedit" in the Open text field. Click OK. The Registry Editor appears.
Navigate to the HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/Session Manager.
Click Subsystems > right-click Windows key > click Modify.
Edit the SharedSection value from 1024,3072,512 to 1024,3072,1024.
Also, set this to a value higher than the Web Intelligence Report Server connection time out value found in the Central Management Console. This value is written in minutes. The default value is 20.
Close the Registry Editor.
Restart the Web Intelligence Report Server for the changes to take effect.
So gurus please suggest for any alternative or permanent fix ,as this seems to be workaround.
please suggest me ..........for fixing this webi memory issue in XI3.0 .
Thank You.

Hi,
Anybody has found any solution to this problem? The forum say in XIR2 we have to modify the webi.properties file in c:\programfiles\Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\WEB-INF\classes\webi.properties to add MAX_HEAP_SIZE=1024000000 as the bottom most line of the file.
My first question is where can i find this file to add the parameter in XIR3.0? I have many webi.properties. Second question, is it the solution?
Thanks in advance,
Sandra.

ORA-06502 on "Help Text" region when changing pages on a tabular form

Hello everybody,
We are developing an application on Apex 4.1.0.00.32. This application have some pages with tabular forms and these pages uses a page zero as template. In this page zero, we have added two sidebar regions: a list region to navigate on the application and a help text to describe how to use our application.
The problem occurs when the tabular split the records into pages (since it has more records that it can show on a single page). When the user clicks to change to another page, Apex raises an ORA-06502: PL/SQL: numeric or value error as described below:
Erro ao renderizar a região "Ajuda". ORA-06502: PL/SQL: erro: erro de conversão de caractere em número numérico ou de valor
Informações Técnicas (visível somente para desenvolvedores)
is_internal_error: true
apex_error_code: APEX.REGION.UNHANDLED_ERROR
ora_sqlcode: -6502
ora_sqlerrm: ORA-06502: PL/SQL: erro: erro de conversão de caractere em número numérico ou de valor
component.type: APEX_APPLICATION_PAGE_REGIONS
component.id: 2
component.name: Ajuda
error_backtrace:
ORA-06512: em "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 3654
ORA-06512: em "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 4204
Obs: Our database is in Brazilian Portuguese, so I guess it will be hard for some people to understand the first two lines! :)
We have tried to change the pagination style of the tabular form and change the region model of the help text but the problem still happens.
Does anyone an ideia about what this may be?
Thanks in advance!

I am getting the exact same message, to the line number, also in APEX 4.1.0.0.32.
Occurs when changing pages in a classic report, Standard region template, select list pagination, when selecting a different pagination set.
In English:
Error during rendering of region "Matched Participants Help & Hints".
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
Technical Info (only visible for developers)
is_internal_error: true
apex_error_code: APEX.REGION.UNHANDLED_ERROR
ora_sqlcode: -6502
ora_sqlerrm: ORA-06502: PL/SQL: numeric or value error: character to number conversion error
component.type: APEX_APPLICATION_PAGE_REGIONS
component.id: 2
component.name: Matched Participants Help & Hints
error_backtrace:
ORA-06512: at "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 3654
ORA-06512: at "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 4204
There are no conditions on the region, and no date string within the Help text. Some HTML tags, that's it.
The Help region renders fine the first time.
The Debug info does not help any:
3.798360.00062Computation point: After Box Body4
0
3.798990.00081Processes - point: AFTER_BOX_BODY4
0
3.799790.00068Region: Matched Participants Help & Hints4
0
3.800470.00213Region rendered dynamically because request was not null4
0
3.802590.00096Add error onto error stack4
0
3.803550.00084...Error data:4
0
3.804400.00084......message: Error during rendering of region "Matched Participants Help & Hints".4
0
3.805240.00084......additional_info: ORA-06502: PL/SQL: numeric or value error: character to number conversion error4
0
3.806080.00081......display_location: ON_ERROR_PAGE4
0
3.806890.00081......is_internal_error: true4
0
3.807700.00084......apex_error_code: APEX.REGION.UNHANDLED_ERROR4
0
3.808540.00082......ora_sqlcode: -65024
0
3.809350.00234......ora_sqlerrm: ORA-06502: PL/SQL: numeric or value error: character to number conversion error4
0
3.811700.00082......error_backtrace: ORA-06512: at "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 3654 ORA-06512: at "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 4204 4
0
3.812510.00081......component.type: APEX_APPLICATION_PAGE_REGIONS4
0
3.813310.00110......component.id: 24
0
3.814420.00099......component.name: Matched Participants Help & Hints4
0
3.815400.00076...Show Error on Error Page4
0
3.816160.00344......Performing rollback4
0
3.819610.00225Processes - point: AFTER_ERROR_HEADER4
0
3.821850.00268Processes - point: BEFORE_ERROR_FOOTER4
0
3.82453-End Page Rendering
Any thoughts on where to poke around for this one?
Thanks - Karen

Memory full error

I'm getting "memory full error" during generation of report. CR version is 8.5. The report contains 2 sub reports. Can anyone suggest what exactly the problem is and what could be the solution ... ??
Thanks in advance ...

And if you run the report int he Designer do you get the same error?
If not then what is the application doing when it gets the error?
What have you done to debug the issue?
Yes, getting the same error in designer also. My application is actually passing data to CR for some inventory related display. The report contains 3 sub reports linked with main report. I'm debugging all the sub reports as I doubt that it can be bcoz of one of the sub reports. Will check and update you ...

"Memory Full" error when changing page setup

Similar Messages

Maybe you are looking for