Memory Full error when opening Opera & Mobile brow...

while using t opera mobile and my mobile's browser, sometimes it says that the memory is full close some applications....y ?
Moderator's Note: The title has been changed as it was moved to a more appropriate board.

Open Opera Mobile and in Options-->Settings-->Privacy... Clear the Cache.. Do that on a regular basis (say before exiting every session of using the Browser) and see if the problem persists..
Moderator's Note: The title has been changed as it was moved to a more appropriate board.

Similar Messages

Memory full - error when open a Peoplesoft crystal report 9/10

Post Author: damisetty
CA Forum: General
Greetings!
We are gettign Memory Full error when open few of the delivered crystal reports. We are using Crystal 9 bundled with peoplesoft, i tried to open with Crystal 10, but same error.
Could any one help me out?
Thanks in advance.
Naga

Are you a Developer or QA or end user? Have you discussed this with your Developer at all? We seem to keep going around in circles. Your Developer should know what he did and how to deploy your app and CR assemblies and what to use.
Subject line is VS 2010, CR for VS 2010 is the only version supported in VS 2010. CR 2008 doesn't have 64 bit runtime. therefore it's not an option, your WEB Servers app pool MUST run in 32 bit mode only if you are using CR 2008.
"If I install the 64 bit version of SAP CR. Should the assembly change in the aspx files? different version number?" Nothing in your app, just deploy the 64 bit runtime and set your app pool to run in 64 bit mode.
If you are using CR for VS 2010 then you can run your WEB server in 64 bit mode and use CR for VS 2010 64 redist files on your WEB server. Then all DB Drivers, Printers and anything else MUST be installed in 64 bit versions. This includes what ever dependencies your UFL has, they too must also support 64 bit platform.
NO Additional requirements to be done or used for 64 bit WEB applciations, just requires IIS App Pool to be run in 64 bit mode and all dependencies available in 64 bits. ODBC DSN is created using the 64 bit ODBC Administrator, Printers support 64 bit applications.
And your UFL and any of it's dependencies must be located in as well as GAC'd if it's required, once again check with your UFL developer:
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64
I suggest you purchase a support case and work with one of our Rep's to sort this out.
http://store.businessobjects.com/store/bobjamer/en_US/DisplayCategoryProductListPage&CategoryID=55987300
Don
Edited by: Don Williams on Oct 20, 2011 1:35 PM

Memory Full error when using Main Report Preview in VStudio 2010

Framework 4.0.30319
VStudio 10.0.20.219.1
SAP Version- 13.0.2000.0
CR 2008 on local machine- 12.2.0.290
I don't get memory full error when I run the report with my locally installed cr 2008. If I go into my visual studio and do a main report preview I get memory full error.
I get this error running same report in cr 2008- MochiKit is undefined. An error has occurred in the script on this page. file:///c:/Program%20(x86)Business%20Objects/Common/4.0/Crystalreportviewers12/js/crviewer/html.js
I can get past that error and report works fine. I can take the rpt file in vs2010 and it runs from the aspx page with the viewer. But I ca't do a preview from the editing of the rpt file.
Any way to trouble shoot where the memory problem is when doing a preview? Makes it really hard to test other dlls when it does this.

Are you a Developer or QA or end user? Have you discussed this with your Developer at all? We seem to keep going around in circles. Your Developer should know what he did and how to deploy your app and CR assemblies and what to use.
Subject line is VS 2010, CR for VS 2010 is the only version supported in VS 2010. CR 2008 doesn't have 64 bit runtime. therefore it's not an option, your WEB Servers app pool MUST run in 32 bit mode only if you are using CR 2008.
"If I install the 64 bit version of SAP CR. Should the assembly change in the aspx files? different version number?" Nothing in your app, just deploy the 64 bit runtime and set your app pool to run in 64 bit mode.
If you are using CR for VS 2010 then you can run your WEB server in 64 bit mode and use CR for VS 2010 64 redist files on your WEB server. Then all DB Drivers, Printers and anything else MUST be installed in 64 bit versions. This includes what ever dependencies your UFL has, they too must also support 64 bit platform.
NO Additional requirements to be done or used for 64 bit WEB applciations, just requires IIS App Pool to be run in 64 bit mode and all dependencies available in 64 bits. ODBC DSN is created using the 64 bit ODBC Administrator, Printers support 64 bit applications.
And your UFL and any of it's dependencies must be located in as well as GAC'd if it's required, once again check with your UFL developer:
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64
I suggest you purchase a support case and work with one of our Rep's to sort this out.
http://store.businessobjects.com/store/bobjamer/en_US/DisplayCategoryProductListPage&CategoryID=55987300
Don
Edited by: Don Williams on Oct 20, 2011 1:35 PM

"Memory Full" error when changing page setup

I'm running Crystal Reports 2008 and yesterday I had two landscape reports begin doing some weird things:
Symptoms:
-Any change to the Page Setup dialog throws the Memory Full error (even just bringing it up and clicking ok)
-The reports were created as landscape but are displaying as portrait in Page Setup and in design view
-A handful of fields are displayed without text in them. If I delete these fields, save, and re-open other fields will not display information (in design view)
Troubleshooting:
-If I remove ALL fields from the reports, save, and re-open the report tells me I have an invalid printer but will allow me to change Page Setup.
*While this works, I really do not want to create the reports again from scratch.
-I have tried removing and re-installing Crystal 2008 with no luck. However, it remembered my recently opened reports which makes me think the uninstall didn't remove everything.
-I have rebooted to make sure all memory available is free.
Does anyone have troubleshooting ideas for me? Thanks in advance.

The link takes me to a page saying "The system cannot find the file specified. " I also tried downloading the .exe version and got the same result.
I was able to find an SP3 download but after unpacking the files and selecting my language I get a message "Crystal Reports 2008 SP3 Update can not install because the version of the product on the system is too low."
I downloaded the SP3 file from here: http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReports2008-VersionandDownloadinformationforSPsand+FPs
I also tried this one with the same effect: Crystal Reports 2008 Reference [original link is broken]
I assume I downloaded an update as opposed to the "full version", is there another full version available somewhere?

Memory full error when trying to access 'access po...

Hi *,
I am using the wlan feature of my lovely e70 quite a lot. Therefore I have quite a lot off access points defined. Now I try to go to the 'access points' and I get a memory full error.
About a month ago I updated to 3.0633.09.04 (german). With 2.x I had the same problem - after a while of filling up the list I could not access it anymore, even to delete entries.
Any ideas on how to proceed? External tools?
Cheers,
Joerg

The error happened because you have defined or accessed a large number of access points with the device. I tend to access a large number of different AP's with my E65's WiFi. Details of each WiFi or edge or hsdpa access point you connect to is stored in that list. Hence, I got this error once.
I got out of that mess by doing the following:-
1. Go to web browser settings
2. In "access point" select "user defined"
3. Then, the device will provide you with a list of all the access points you have defined and ask you to select the default access point.
4. At this point, you can start deleting some of the access points. (Options -> Delete after selecting any ap in the list)
5. After you have deleted some of the access points, you won't have the memory full error you encountered.
This is certainly an inconvenience. One way to avoid this issue is to manually pare down the access point list once in a while. Delete some of the access points that you use very infrequently or never again.

WIS 30280 - Webi Server Memory Full Error

We are getting "WIS - 30280 - Webi Server memory full error" when a report is scheduled in XI R2. When the same report is refreshed it works fine.
Restarting webi didnot help the issue. I have searched in various forums about chaning the registry entry but in vain.
Please suggest where to go next.
Thanks

Hi
do you have other WebI reports which can be scheduled without a problem?
Can you please check the memory consumption of the WebI report and the WebI job servers while the report is run (through the scheduler).
Can you consider updating to SP5?
Regards,
Stratos

Memory full error...when it isn't

Since updating to Belle I've been receiving a lot of "memory full" messages in a variety of applications, often with barely anything else running on the phone.
I've done a fair bit of testing to try to narrow down the culprit but I'm coming around to the conclusion that it's Belle, not the apps.

I do almost no browsing.
My unscientific narrowing down comprised of:
Reformatting N8
Installing Belle
Installing a few apps
Memory full error occurs after one or two days
I thought it might be Swype (from Beta Labs) so didn't install it one time but still got memory full.
I thought it might be Maps Suite 2.0 (from Beta Labs) so didn't install it one time but still got memory full.
I thought it might be IMO (as it's not officially available for Belle) so didn't install it one time but still got memory full.
Apps that I consistently install are:
Cutebox
Store
DLNA Play (Beta Labs)
ScreenSnap
Opera
GoogaSync
Battery Info
...and I also have two email accounts which check every 15 mins.
I have three homescreens:
1.
Calendar (official one line version)
Fourteen app shortcuts
2.
Two email widgets
3.
FM transmitter widget
DLNA Play widget
Music player widget
Four app shortcuts
Battery Info widget
I should have just included screen grabs, lol!
Sometimes the memory full message appears when I'm doing something big, like starting maps or camera or calendar (never photo gallery though), but other time it happens while doing something small like switching homescreen or backing out of an application, but the strange thing is that when I check memory status (RAM, not the C: drive) I find that there's plenty free.
Anyway, homescreen grabs attached.
Attachments:
Scr000008.jpg ‏88 KB
Scr000009.jpg ‏61 KB
Scr000010.jpg ‏100 KB

Memory full error message when battery is low

(Ive done a check and cant find anything similar)
I have an E71 and keep getting "memory full" error messages ONLY when the battery is low. I have 109 free memory out of 119, and when I connect to the USB it says it doesnt recognise it, so I cant save anything to computer, not that there is anything on there.
The problem is, because it says MEMORY FULL, it wont recharge, even when the charger is plugged in and switched on. Which means basically the phone is useless.
I think this has to be a softwear problem and not a Ive-misused-it-problem because the MEMORY FULL ! message comes up only with low battery.

Hi have you checked if your 920 memory is full via the Settings > Phone Storage to ensure that your 920 has got enough memory? Otherwise, have you checked your car stereo itself (is it a model that has built-in flash storage or hard drive storage) for its memory capacity?

"memory full" error while saving. Can I recover VI?

While I was saving a VI, a "memory full" error is occurred. I tried to
save again and there was no other error. Now, when I try to open the
VI, the error dialog: "Labview load error code 16:Could not load data
space link information" appear. It seems that I lost all my work, but
there is a method to recovery the VI?
Thanks to all for any suggestion.
Max

"Only another question. My computer has 1GB RAM and I seen in windows task manager, after the memory problem, that LV used about 400MB of memory and there was still 300MB of free RAM(the other RAM was used by .othr programs).
Memory full is the erro returned if LV attempts to allocate memory and it can not. When allocating, the memory MUST BE CONTIGUOUS!
Warning: The following may change version to version and is based on my observations.
As i understand it, LV will enusre a buffer is larege enough to handle new data before the data is added. If the buffer needs expanded. LV will DOUBLE (Note: My understading, NOT known to be true) the size of the buffer. Under this scheme, if your buffer was 200MB and needed expanded, LV would have to acquire a block of 400MB from the OS.
Just my understading....
If someone knows better, please chime in.
Trying to help,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

E72 adnormal "Memory full" error

RE: E72 "Memory full" error with 10MB data reception by widget
RE: Continuous "Memory full" error after all applications are closed
Device: E72-1 HK versoin, software version:021.024
Phone Free Memory: 216MB
Memory Card Free Memory: 3GB
App: "Apple Daily" by Ovi store; this software preloads news with photos to memory card
Firstly reboot the device in test run, when the app Apple Daily receives data up to about 10MB, there is "Memory full" error and stops the data reception. Other embedded softwares by E72 also reports "Memory error" once the above error happened.
This situation is not resolved by closing all applications. This can only be resolved by re-booting the device.
This problem is odd that the device report memory full with lots of memory available. Even devices such as E66 and XM5530 with lower spec and less memory can run the app perfectly.
And this is odd that the device does not release memory when closing applications.
Does anyone face this problem? And anyone knows this is a bug or what is the cause?
Thanks.

g3cube wrote:
RE: E72 "Memory full" error with 10MB data reception by widget
RE: Continuous "Memory full" error after all applications are closed
Device: E72-1 HK versoin, software version:021.024
Phone Free Memory: 216MB
Memory Card Free Memory: 3GB
App: "Apple Daily" by Ovi store; this software preloads news with photos to memory card
Firstly reboot the device in test run, when the app Apple Daily receives data up to about 10MB, there is "Memory full" error and stops the data reception. Other embedded softwares by E72 also reports "Memory error" once the above error happened.
This situation is not resolved by closing all applications. This can only be resolved by re-booting the device.
This problem is odd that the device report memory full with lots of memory available. Even devices such as E66 and XM5530 with lower spec and less memory can run the app perfectly.
And this is odd that the device does not release memory when closing applications.
Does anyone face this problem? And anyone knows this is a bug or what is the cause?
Thanks.
WELCOME MESELF ! to the group of users with Memory FULL !
I have the E72 for a couple of days now. After a bitter experience with the n97 with the same woes, i decided to go for a stable business phone... given the very good review of the e71...
Could not open a csv file of 1.83 MB... due to memory full error... However the same file opened very easily on my other devices...
Also the way the browser handles various files can be optimised. I think Nokia can pick up a few good things from other business phones....
Hope there is a fix soon.

XI3.0-WEB INTELLIGENCE SERVER MEMORY FULL - ERROR (WIS -30280)

Hi All
when i try to open the webi report i get error
WEB INTELLIGENCE SERVER MEMORY FULL - ERROR (WIS -30280)
JAVA Deployment and XIR2 Edit the webi.properties file :
1) Go to windows explorer.
2) Go to C drive (or wherever your Tomcat is installed) c:\programfiles\Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\WEB-INF\classes\webi.properties
3) open this file webi.properties with a notepad and add MAX_HEAP_SIZE=1024000000 as the bottom most line of the file.
4) Save the file.
5) Restart the tomcat server and webi as well.
(This works for xir2 and this is not the permanent fix I guess)
For Xi3.0 : XI3.0-WEB INTELLIGENCE SERVER MEMORY FULL - ERROR (WIS -30280)
Cause
The error message appears because the Web Intelligence server stresses the memory resources when processing many reports containing a large amount of data.
Resolution
To resolve the error message, it is necessary to increase the memory heap size value. Complete these steps:
Click Start > Run. The Run dialog box appears.
Type "regedit" in the Open text field. Click OK. The Registry Editor appears.
Navigate to the HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/Session Manager.
Click Subsystems > right-click Windows key > click Modify.
Edit the SharedSection value from 1024,3072,512 to 1024,3072,1024.
Also, set this to a value higher than the Web Intelligence Report Server connection time out value found in the Central Management Console. This value is written in minutes. The default value is 20.
Close the Registry Editor.
Restart the Web Intelligence Report Server for the changes to take effect.
So gurus please suggest for any alternative or permanent fix ,as this seems to be workaround.
please suggest me ..........for fixing this webi memory issue in XI3.0 .
Thank You.

Hi,
Anybody has found any solution to this problem? The forum say in XIR2 we have to modify the webi.properties file in c:\programfiles\Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\WEB-INF\classes\webi.properties to add MAX_HEAP_SIZE=1024000000 as the bottom most line of the file.
My first question is where can i find this file to add the parameter in XIR3.0? I have many webi.properties. Second question, is it the solution?
Thanks in advance,
Sandra.

Memory full error

I'm getting "memory full error" during generation of report. CR version is 8.5. The report contains 2 sub reports. Can anyone suggest what exactly the problem is and what could be the solution ... ??
Thanks in advance ...

And if you run the report int he Designer do you get the same error?
If not then what is the application doing when it gets the error?
What have you done to debug the issue?
Yes, getting the same error in designer also. My application is actually passing data to CR for some inventory related display. The report contains 3 sub reports linked with main report. I'm debugging all the sub reports as I doubt that it can be bcoz of one of the sub reports. Will check and update you ...

Memory full error while playing video in N8.... Pl...

Hi All,
I am getting memory full error while playing movie..... it plays for abt 5 minutes & then the error message pops up and the application shuts down.....
I have checked C:, D: & E: & they have enough free space..... but i did find any solution......
please if anyone can help....
Thanks in advance!!

This might happen if some memory extensive application ,like an antivirus or some other mobile management softwares are running in the background.
You can start by checking if stopping /removing these apps correct the problem.
Else sometimes viruses in the memory card can cause this, try removing any external memory and play something from the phone memory.

HDMI Out memory full errors

Almost every time I go to play my HD videos i recorded via the HDMI out port, i get memory full errors.
Even when there are no apps running in the background.
Some times a reboot will help, but not always.
Is this a bug?

Hi Kristopher,
Is the GPIB-ENET connected to a larger network, or is this an isolated network just for the GPIB-ENET? Make sure that other network traffic isn't causing a problem. If you can, try connecting the GPIP-ENET directly to a PC using a crossover cable (be sure to set a static IP address on the PC). This should eliminate the hub or any network traffic as the cause. If the issue is only with one particular device, try to remove the other devices to see if you still have the problem. There shouldn't be a memory leak if all other devices are working properly. Try to isolate the cause by removing devices and steps in the network. Good luck.
Michael Chaney
Systems Engineer - TestStand
National Instruments

X6 mass memory full error

I want to copy some MP3 files to the X6 phone mass memory through windows explorer but it give me a memory full error message.
Before I start to copy, it indicated 8.40G free out of 15.0G (not sure why it is 15G), but once I start to copy, it pops up the error message. I disconnect the phone and use the phone file manager to check and it has about 8.4G free. Try it again, the same happened.
While in windows explorer it indicated it is full full, under the ovi suite->view->device information, it has 8,4G free! I know I have the space because I deleted a lot of files recently.
Firmware: V21.0.004. OS: Windows 7

I received an email from Nokia support about the issue however unfortunately their advice was useless...
I will copy/paste it here in-case it might be useful to anyone else.
Thank you for contacting Nokia Care.
We sincerely apologise for any inconvenience this issue may have caused you. In response to your concern with your device, the phone notifies you if the phone memory is getting low.
To free phone memory, transfer data to a mass memory in the File mgr application. Mark files to be moved, select Move to folder (or Organise > Move to folder) and then the destination folder.
In order to free memory, you could also remove or move the following:
a. Messages from Inbox, Drafts and Sent folders in Messaging
b. Retrieved e-mail messages from the phone memory Saved Web pages. Clear the web browser cache to free some memory.
c. Saved images, videos, or sound files
d.Contact information
e.Calendar notes
f.Downloaded application packages
g.If there are applications which are not needed any more, uninstall them
h.Any other data that you no longer need
If possible, use the mass memory instead of phone memory in the Camera application. You can also use Image Store available in the Nokia PC Suite or Ovi Suite to transfer images and video clips for example to a compatible PC.
If you are deleting multiple items and any of the following notes are shown: Not enough memory to perform operation. Delete some data first or Memory low. Delete some data, try deleting items one by one (starting from the smallest item).
For future reference, please feel free to check our website. Kindly refer to the link below:
http://www.nokia.co.uk/home
You may also call our Customer Care Hotline at 0845 -045-5555,
Mon-Fri 9am - 7pm (except bank and public holidays)
Please do not hesitate to contact us again if you have any questions.
Yours sincerely,
Jacklyn B.
Nokia Service Professional
UK & Ireland Team
Nokia Care

Memory Full error when opening Opera & Mobile brow...

Similar Messages

Maybe you are looking for