Memory heat 60*c when idling...should I worry?

The other day I bought off ebay 8 gig of mac pro ram for a very good price.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=11 0346089118
now on the item description it had photos of normal mac pro ram *with the big heat syncs* but the ram I receieved actually looked like this.
http://www.memso.de/downloads/fotoarchiv/produkte/fb4096hym9101280x12801.jpg
Now as you can see this has significantly smaller heat syncs, now my old ram *offical apple stuff* used to be about 45*c when idle and this stuff is idling at about 60-61 *c.
The question I have is should I worry about the temps this stuff is running at or am I safe, Or should I send it back and spend the same about to get a bit less but better quality ram?
I run a recording studio off this machine and I do alot of intensive video rendering too so I assume when its being taxed the ram will get even hotter.
Any suggestions?
Will

The temps are fine. You are lucky to have 45C temps but anything 70C or below is fine. It is when you get above 78-82C that you should be concerned.
http://developer.apple.com/technotes/tn2006/tn2156.html
And you want to stress them to death to see how well they behave if you decide to stick with them or search elsewhere.
But, they do look unique and unlike anything.
http://support.apple.com/kb/HT2813
There use to be kits to add RAM heat sinks. Don't recall who sold them.
Hynix in the news
http://www.hardmac.com/news/2008-04-04/#8065

Similar Messages

Virtual memory exhaustion when idle

Everytime I leave my laptop for a long period of time (couple of hours) and then come back I get the popup that windows ran out of memory.
So I tried to look into event viewer and here is what I see ( http://goo.gl/TLpkV6 ) //Sorry I'm not allowed to post pictures for whatever reason
The event details display those values:
SystemCommitLimit 34 235 564 032
SystemCommitCharge 34 088 890 368
ProcessCommitCharge 4 058 849 280
PagedPoolUsage 438 538 240
PhysicalMemorySize 8 465 760 256
PhysicalMemoryUsage 4 248 018 944
NonPagedPoolUsage 183 934 976
Processes 129
I have the default Pagefile size (maintained by system) and it looks like something is using it all even though the physical memory has still about 50% free space
So I tried to attach a task to this event and I used PsList to dump all the processes when this event occurs. However I didn't find anything abnormal in the log.
Here it is:
Process memory detail for MARTIN:
Name Pid VM WS Priv Priv Pk Faults NonP Page
Idle 0 64 24 0 0 1 0 0
System 4 44948 2380 21108 228560 8444074 0 0
smss 344 4288 376 284 352 1272 2 12
csrss 488 53624 2636 2588 2824 54974 15 161
wininit 552 41132 908 1184 1488 8246 7 96
services 608 27584 5424 4356 4992 366546 9 118
lsass 616 59556 13156 10120 10364 357942 22 150
svchost 696 88640 14252 11896 32748 466830 23 716
svchost 740 55916 9788 9416 9708 1381645 20 134
DpHostW 908 613672 20828 44632 48784 362592 58 334
svchost 944 234420 45628 118704 127504 1211691 34 240
svchost 976 4194303 133876 138580 650168 26413408 51 288
svchost 508 539936 323232 321124 401704 14494875 68 763
svchost 764 119072 17068 16124 17808 245309 42 225
stacsv64 1100 73788 4904 6732 6820 80241 13 139
L4301_Solar 1228 53316 1608 1604 1736 5520 7 103
vcsFPService 1244 119864 1304 1852 1976 5405 9 123
svchost 1308 1279312 23372 22836 71916 643069 51 243
wlanext 1468 96560 5028 5408 5596 62101 19 193
conhost 1484 27444 344 556 672 1006 4 57
spoolsv 1572 100792 7212 8392 10204 104349 28 197
svchost 1640 184960 33980 34616 152996 6586884 38 180
armsvc 1904 45088 680 1020 1204 2935 7 87
EvtEng 1964 98744 4888 5048 5404 89611 18 175
RegSrvc 872 69036 1428 1872 1968 7757 9 134
svchost 1728 69600 5356 2912 4428 33407 11 132
TeamViewer_Service 1940 94344 2476 4544 4848 13215 26 189
vmnat 2060 47524 1348 1736 1988 24619 10 86
MsMpEng 2080 315092 91516 107944 467692 107216375 42 353
ZeroConfigService 2132 123908 7808 8060 10168 449651 23 233
vmware-authd 2200 89456 3196 4648 5156 1113449 16 167
dasHost 2272 72276 2616 3840 4392 8943 12 149
vmnetdhcp 2340 30012 7152 7276 7428 6320 6 43
unsecapp 2352 29152 1776 1444 1564 37631 6 55
WmiPrvSE 2380 112300 12716 12716 25488 2320161 17 153
WmiPrvSE 2400 56676 9260 7112 10024 183028 11 91
vmware-usbarbitrator64 2556 66780 2284 2284 2372 6278 11 130
vmware-hostd 2728 176176 18572 31296 31736 855061 37 276
svchost 2880 97028 10448 8704 10112 90687 33 184
svchost 1944 24112 2388 2012 3176 84187 8 43
NisSrv 3324 52048 1068 7476 10260 733397 13 91
SearchIndexer 4916 759956 143660 160300 332296 9081293 81 443
hpqWmiEx 5288 60704 1920 1644 1840 93044 10 121
ICCProxy 5824 36876 956 1292 1528 5712 8 71
BTHSAmpPalService 8896 32404 696 1008 1100 2369 9 53
BTHSSecurityMgr 8980 46472 1264 2316 2448 4122 21 91
OSPPSVC 13052 45928 2752 2424 3080 12738 7 88
GoogleCrashHandler 100572 49036 380 1488 2236 167778 8 104
GoogleCrashHandler64 100484 51000 372 1300 1424 6990 7 97
csrss 11176 422268 57940 3760 32944 1391841 66 937
winlogon 78752 54140 1848 1356 1708 15016 8 116
dwm 91476 302424 30572 25404 53948 130614867 34 1722
taskhostex 63852 299524 8256 5116 18880 133406 24 194
SynTPEnh 63772 106584 900 5424 5520 174946 17 253
taskhost 17264 186240 11576 8772 11504 23811 18 343
SynTPHelper 27516 43820 380 688 712 15527 5 86
DPAgent 55256 114168 6920 6432 6732 6873 27 210
explorer 49704 735052 160792 129124 161524 3884908 141 1450
livecomm 53652 933972 30468 28752 30772 474614 40 415
SkyDrive 48624 184764 4340 15328 31776 273178 29 280
RuntimeBroker 18164 178608 18956 11160 18028 233418 22 332
DpAgent 75992 43424 684 784 784 946 5 85
igfxsrvc 131912 72348 4476 2820 2908 4329 10 130
hkcmd 53396 79700 2004 1636 1936 2063 10 153
igfxpers 2892 90844 4016 2064 2204 3311 12 170
SetPoint 9680 190380 19776 17160 17460 3482400 31 302
KHALMNPR 49724 117620 5620 3856 4300 4245 23 190
GoogleUpdate 59208 87456 508 2124 2284 31183 14 165
SettingSyncHost 39820 170220 3272 10492 87284 795172 26 316
chrome 32212 151068 10916 8016 8580 18894 23 275
chrome 57844 625224 316396 243820 281988 16606915 184 713
chrome 792 711600 239160 241528 424620 48754082 46 607
chrome 57636 228016 70036 70196 113280 239994 32 246
chrome 64324 199036 35636 35796 46792 25561 28 246
chrome 101752 181488 18540 22908 27984 41914 25 250
chrome 5260 389224 206556 198692 305988 2114575 87 262
chrome 88672 228632 56516 56968 73048 166525 38 259
chrome 55272 187292 16628 22920 28016 12477 25 253
chrome 56228 183512 16572 24960 25184 9840 25 253
chrome 52452 286576 101576 100304 117124 371134 52 263
chrome 23584 193628 16380 23172 27108 13208 26 253
chrome 55360 210408 46884 52016 62664 128337 35 259
chrome 50344 182360 11080 21420 22992 7483 25 253
chrome 54624 199704 23472 30180 36216 67469 28 253
chrome 23668 185828 12440 22960 24180 8424 25 253
chrome 22488 191268 18576 24228 27204 16644 26 253
chrome 35332 263972 77000 85008 162044 837404 33 253
chrome 14744 204912 40872 40124 51996 165195 32 253
chrome 19152 191140 16184 24512 27596 15582 25 253
chrome 60048 186788 11468 21816 23364 7680 25 253
chrome 90376 184932 16672 23836 27316 14870 25 253
chrome 57780 189156 11752 21836 24424 7886 25 253
chrome 70696 189156 21800 27152 31228 30965 26 253
chrome 34788 185688 18016 24640 24664 11659 25 253
chrome 101608 184600 18472 25408 28348 12283 25 253
chrome 129208 159432 8084 10000 10000 5155 18 275
nacl64 35080 73064 1204 1520 1552 1370 8 148
nacl64 51044 4194303 3908 25772 264924 4608 8203 611
Skype 49672 389896 115448 103248 111760 54060700 103 561
chrome 10376 149068 5600 4536 4536 3774 21 270
flux 54068 141824 9156 10876 11304 7486 18 242
Dropbox 42008 307004 84720 82012 96064 205381 52 359
googletalkplugin 31032 116036 11368 10704 10992 64808 23 203
ONENOTEM 62328 74860 1560 1432 1504 3772 10 143
chrome 7356 224828 25884 34544 44348 185826 33 304
CSISYN~1 130496 283012 9632 8324 8408 10926 22 400
ielowutil 6072 56400 380 1220 1436 10104 9 110
chrome 11112 216252 32368 39096 59100 85374 33 256
chrome 51680 225488 56272 38272 55140 2913643 33 304
chrome 127188 231316 29080 36380 49956 2040427 33 304
chrome 86452 227412 31384 38664 48576 2291522 33 304
chrome 22668 230776 35792 43212 53256 3765469 33 304
chrome 43700 337968 22184 21140 203600 1259954 37 270
chrome 44120 203040 28756 38612 42168 321797 28 202
chrome 136084 260288 94204 91316 115484 959115 44 264
chrome 91392 146412 4104 4116 4116 3241 16 266
Taskmgr 6588 159648 29828 21432 26412 109347485 26 370
chrome 45096 181232 27744 23260 27376 10676 25 250
chrome 49304 205380 52352 43268 59156 73829 35 256
chrome 27828 222748 49120 41348 67412 56080 34 256
chrome 94756 203760 52196 38084 69612 54674 30 260
chrome 81884 203100 44132 34600 52912 32984 31 256
chrome 132092 228924 70200 38252 48608 955996 33 302
chrome 142004 216936 59136 36936 45512 671152 33 284
chrome 105208 232456 67812 57488 91232 85132 38 254
mmc 110996 796588 32032 52276 67112 314694 51 744
WmiPrvSE 131672 29476 5992 2332 2768 1873 8 55
svchost 120260 31156 4712 1196 1352 1262 7 62
audiodg 33452 72356 13272 9308 9316 3679 17 161
WWAHost 97396 654624 38364 26476 29484 11234 41 463
WWAHost 99776 175564 25788 9672 13272 8122 27 313
taskhost 116388 98356 11344 3116 3116 2964 15 188
cmd 108636 14524 2432 1568 1568 605 3 28
conhost 125200 59244 5844 1224 1224 1516 8 116
pslist 111172 73476 5908 2248 2248 4230 8 139
When I did the SUM, I got these results:
VM: 33,601,910
WS: 4,038,504
Priv: 4,041,576
Priv Pk: 7,109,352
So it looks like VM is really 33GB. So I tried to run the same dump again manually when I was using the computer, because I never get out of memory dialog when I actually use my laptop and I got total size of used VM of 39,035,346 KB
However the task manager says only 7.6 GB of virtual memory is used and like I said I never get out of memory error when I actually use the laptop.
Task manager screenshot here: http://goo.gl/20lyjA
I've never had this problem until I upgraded my laptop to Windows 8.1 through Windows Store. Now I see the out of memory error every morning when I come back to my laptop.
Any ideas how to solve those memory issues when my laptop is idle?
UPDATE:
I just found out that it only happens when I have a monitor plugged into the DisplayPort (even though the monitor is turned off). My laptop has Core i5 3210M with the latest graphics drivers installed (10.18.10.3496)

Today I killed Chrome for the night but the result is the same
Also Windows Defender didn't find anything.
SystemCommitLimit 34,235,564,032
SystemCommitCharge 34,092,351,488
ProcessCommitCharge 10,08,476,160
PagedPoolUsage 447,950,848
PhysicalMemorySize 8,465,760,256
PhysicalMemoryUsage 1,730,576,384
NonPagedPoolUsage 154,148,864
Processes 79
http://goo.gl/uwPJN1
And the process dump (sorted by VM desc)
Name Pid VM WS Priv PrivPk Faults NonP Page
svchost 988 4,194,303 103,444 107,520 632,152 1,040,920 48 231
svchost 1,312 1,188,268 8,632 8,256 10,024 8,024 36 129
livecomm 4,836 927,052 28,356 24,380 25,108 84,802 43 391
WWAHost 3,388 655,556 38,528 26,476 29,624 11,318 42 463
explorer 3,840 650,372 76,368 90,880 129,928 548,431 179 1,382
DpHostW 892 587,908 19,316 36,372 38,836 21,219 56 326
SearchIndexer 4,572 568,896 53,580 62,328 98,488 354,458 73 528
svchost 436 441,112 25,880 25,632 360,828 300,035 55 375
explorer 6,360 359,384 28,236 36,104 39,280 35,612 71 624
Skype 7,724 338,140 86,724 90,528 95,108 28,164,574 69 533
csrss 552 314,260 13,108 2,884 31,632 216,171 41 674
taskhostex 3,332 306,036 13,056 11,220 11,352 31,744 51 210
MsMpEng 2,112 305,492 48,216 76,448 183,144 3,187,826 42 319
Dropbox 6,184 296,472 66,392 76,524 83,444 133,920 50 346
CSISYN~1 5,212 280,972 6,516 7,460 7,840 6,159 23 400
dwm 884 274,864 16,256 16,696 45,532 7,151,518 23 1,783
SetPoint 5,596 184,192 16,624 17,592 17,956 260,341 30 289
SkyDrive 3,924 181,984 4,192 13,880 30,544 115,647 29 274
WWAHost 9,124 177,500 25,568 9,744 13,480 8,066 27 315
taskhost 1,720 175,724 10,076 7,324 7,340 6,689 19 345
vmware-hostd 2,696 165,648 25,436 27,856 28,156 82,271 33 253
Taskmgr 5,448 160,580 20,160 21,156 28,524 27,600,455 28 364
SettingSyncHost 4,036 147,452 2,416 7,656 11,752 38,943 25 288
chrome 6,028 143,320 6,416 7,300 8,972 6,793 22 266
flux 7,720 137,636 6,696 10,864 11,304 5,423 18 234
svchost 948 134,080 18,484 23,020 25,756 25,985 34 196
WSHost 1,772 130,696 6,604 6,864 8,700 8,366 21 255
RuntimeBroker 3,580 125,732 13,464 6,320 7,036 42,007 18 247
svchost 1,552 119,240 20,320 21,460 141,868 156,549 37 128
vcsFPService 1,248 115,824 1,308 1,748 1,884 1,556 9 115
KHALMNPR 5,620 112,556 4,128 3,824 3,916 3,366 24 178
DPAgent 4,056 107,152 5,384 5,696 6,044 4,669 24 188
ZeroConfigService 2,144 103,648 5,992 5,128 5,316 21,611 19 193
svchost 736 99,752 9,884 9,576 9,836 7,358 41 212
SynTPEnh 3,340 97,304 1,048 3,660 3,804 11,269 15 242
spoolsv 1,512 93,648 6,668 6,916 9,004 9,866 28 191
EvtEng 2,044 93,364 4,240 3,872 3,956 3,793 17 167
wlanext 1,832 90,316 4,452 4,056 4,396 6,735 19 184
GoogleUpdate 5,972 87,440 448 2,088 2,356 7,617 13 165
igfxpers 5,912 85,784 1,728 1,960 2,112 2,313 11 162
vmware-authd 2,224 85,024 3,192 3,996 4,260 39,321 15 150
svchost 680 80,904 9,296 6,984 20,752 13,699 22 230
hkcmd 5,884 79,684 1,412 1,608 1,920 1,892 9 153
svchost 3,016 75,528 5,024 4,264 5,256 5,146 30 155
ONENOTEM 7,896 74,848 924 1,460 1,660 2,407 10 143
pslist 4,328 74,408 5,740 2,184 2,184 4,187 8 141
audiodg 4,556 73,288 13,256 9,292 9,300 3,671 17 131
WmiPrvSE 2,324 69,348 4,728 2,948 3,640 5,745 14 129
stacsv64 1,108 68,724 3,464 5,008 5,416 4,675 13 131
igfxsrvc 5,860 68,308 1,696 2,320 2,456 2,469 10 122
SearchProtocolHost 1,844 67,896 7,184 1,796 1,848 1,952 11 141
RegSrvc 1,544 64,904 1,372 1,560 1,708 1,814 8 126
vmware-usbarbitrator64 2,536 63,640 1,696 1,972 2,076 2,569 11 124
conhost 5,968 61,448 5,720 1,240 1,240 1,487 8 121
svchost 1,200 60,780 1,824 2,112 3,444 2,892 11 119
hpqWmiEx 4,356 56,608 1,876 1,536 1,820 3,092 10 105
lsass 604 54,704 7,776 6,680 6,696 8,785 25 131
winlogon 796 54,372 1,096 1,312 2,884 7,921 8 117
GoogleCrashHandler64 4,024 51,000 356 1,232 1,352 1,604 7 97
csrss 492 48,656 2,144 2,084 2,252 3,583 14 151
GoogleCrashHandler 4,016 48,420 1,068 1,320 1,580 4,005 8 99
L4301_Solar 1,224 48,252 1,256 1,200 1,408 1,390 7 95
vmnat 2,068 45,372 1,120 1,260 1,512 1,611 9 85
NisSrv 3,548 44,732 748 4,664 7,696 13,624 179 85
svchost 724 44,612 6,552 5,920 6,084 32,460 19 103
SynTPHelper 4,088 43,820 324 684 756 1,226 5 86
DpAgent 4,316 43,408 696 800 864 914 5 85
BTHSSecurityMgr 7,344 41,936 2,076 2,208 2,340 2,161 22 82
WmiPrvSE 2,332 41,576 4,164 4,476 6,288 14,053 11 80
wininit 536 40,700 656 732 956 1,282 7 94
IntelCpHeciSvc 1,920 36,908 1,052 1,328 1,616 1,430 9 67
ICCProxy 5,932 32,744 1,008 1,160 1,352 1,446 8 63
SearchFilterHost 4,452 32,292 4,204 1,016 1,120 1,077 6 80
unsecapp 2,304 30,184 1,784 1,316 1,316 1,825 6 57
vmnetdhcp 2,504 29,548 7,212 7,256 7,388 4,223 6 43
taskeng 8,012 28,520 4,528 1,096 1,280 1,214 7 54
BTHSAmpPalService 7,280 28,364 932 988 1,084 1,060 10 45
conhost 1,848 23,360 528 548 620 702 4 49
services 596 22,724 4,216 3,552 4,024 7,784 9 106
svchost 2,960 22,064 1,208 1,340 2,652 2,526 8 43
dasHost 1,220 19,732 1,120 1,124 1,760 1,196 5 42
System 4 19,604 1,656 9,496 20,760 80,340 - -
cmd 7,320 14,524 2,440 1,572 1,572 607 3 28
smss 356 4,288 300 276 340 555 2 12
Idle - 64 24 - - 1 - -
SUM 279,328 16,881,479 984,992 1,046,188 2,374,864 70,032,042 2,079 18,465

Severe Memory Leak in Mavericks When Downloading

I have a Macbook Pro running 10.9.3 with 10 gigs of RAM. The RAM works fine and checked out fine in AHT. Since updating to 10.9.3 when I download things from Steam, iTunes, Mac App Store, etc. the available memory goes significantly down when only running one of the programs at a time. It gets to dangerously low points around 7-8 MB available (monitored by memory clean and activity monitor.). The faster the internet connection, the faster the memory is depleted. It's like its downloading to ram and then writing to disk instead. When it gets too low I purge the memory through a terminal program I wrote as it clears up more memory than memory clean.
Even after cleaning the memory it still depletes fast if I'm downloading something. However If I'm not downloading anything on those apps they use little to no memory at all.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

High CPU Usage when Idle

Hello Crew!!!
I have been using a ThinkPad Z60t, running the OS WinXP Pro that came bundled with the Thinkvantage Software. I have had no problems with my computer for the two years I have been using it. I use it as much if not more then a traditional desktop, covering all aspects of my life, from business to gaming (although it is not a gaming comp, it does me fine). Recently, within the last week or so, I noticed a huge lag-like spike every minute or less, including when the system is idle and isn't playing anything. I ran McAfee as well as AdAware and found no issues out of the ordinary. After reading a few forumn posts, on other websites, I ran a processes check, with Microsoft based software "Sysinternals" and found that over 50-80% of my processor was being used by Deffered Procedure Calls (DPC's) and Hardware interrupts. I chose to reinitialize my entire system, back to factory settings, wiped it all. Guess what it is still doing it!!!!
I have completely updated my OS, and other forumns suggest that there is a hardware issue, or intermittent signal with the CPU or Motherboard, what can I do to test this theory or to find solutions, please help me!!!!!

ron App wrote:
bMaNoNe wrote:
...but considering it's normal it's ok I guess.
It is not "normal" and cannot be "normal". Programmers like that must be fired immediately.
It's like iTunes - scroll cover flow fast enough, and you can get memory usage up to 1GB (!!?) which is even not fully returned after you stop scrolling.
And those people are making jokes about Windows? Yes, it is ugly but when they have blunders like this, at least they correct them. Just returned from the shop, wanted to buy 27" iMac. 3.06GHz model was running Parallels with Vista, processor usage continuously like 3-5%. iMac was cooking - if I put my face 0.5m from the screen, I could feel the heat!
I don't know about iTunes... some of the recent Mac apps (Safari, iTunes) are so slow/inefficient I stay away from them. However, Logic's CPU use when idle is completely normal for a "real time" application that starts approx 20 threads minimum. All DAW application do this to some extent, some more than Logic.
What's not normal is how much heat the new Macbook, MBP and iMacs are generating, the folks over on the Macbook forums are starting to see heat related failures.
As a side note, Windows 7 is much more efficient than Windows XP_Professional, that's saying something as XP is a good real time DAW OS. After Vista I didn't expect much but Win_7 is a nice OS.
pancenter-

Is it normal to use over 9,000,000k of memory (Private Working Set) when working on 3-4 photos with approx. 10-12 layers each while running CC??

I started using CC in December with absolutely no issues. In April, CC suddenly started crashing on me when I would run certain actions that I have used for years. My first thought was that my computer was going bad. This began a two month process of eliminating any potential computer problems. Fixes were as follows:
Installed new SSD.
Installed new 2T storage drive.
Installed new video card and power source to run new video card.
I am operating Windows 7 with 16G of RAM on a quad core, which should be more than sufficient to handle the demands of CC. It worked fine for four months, so obviously it is capable of doing the job.
$400 later, CC still crashed while using certain actions.
As a test, I tried running the same files with the same actions on my husband's computer, which is a year newer. CC crashed on his as well when the actions were ran. After much head banging, tears, and communication with Adobe, it was determined that it's not uncommon for older actions to not be compatible with newer versions of photoshop. As a result, I spent weeks reworking my entire workflow to redo/remove the actions I had come to rely on.
Fast forward to today. I have fixed everything I possibly know how to fix, yet I still have to be VERY careful not to push CC too hard. I used to be able to work on 6 photos at a time, with 10-15 layers on each photo. CC NEVER crashed on me. Now, I can barely work on 2 or 3 photos and it will crash if I'm not careful about running one action at a time (instead of batching) and I have to keep my layers to a minimum. During the time I was trying to figure out my computer problems, I started paying more attention to my memory usage while CC was opened. Before all the changes, I would use 5-6,000,000k of memory with only 2 or 3 photos opened. AFTER all the fixes, I still continue to use an insane amount of memory.
Things to consider before offering any suggestions:
*Yes, I have re-installed CC about 5 times after my computer upgrades, mainly because I could not get my actions to populate. So I don't think a re-install will help.
*I tried removing most of my actions from CC, and it made no difference in memory usage. Besides, when I did the test on my husband's computer, the only actions installed were the few I was trying to test.
*I disabled auto-save and the recovery feature. Still no difference.
So, bottom line, my question is if it is normal to use so much memory when doing such simple tasks?? Most of my layers are levels, curves, fill, and a sharpening layer and noise filter. It doesn't seem those would be considered task intensive. Not only that, but also when I did the test on my husband's computer, I checked his memory usage and he didn't even break 2,000,000k at the same time I was using 5-6,000,000k for the same task. And he only has 12G of RAM. So SOMETHING is not right! Is there a setting I need to change so that CC is not so memory intensive?? I could see if I were doing 3D graphics of something, but these are simple photo edits that I have done for years without any problems.
Sincerely hope that somebody has some/any suggestions on how I can get the memory usage down so I can run CC as it's meant to be - fast and efficient!
Thanks in advance for any help!!

Thanks again for your suggestions Noel! I do hope that resetting my preferences will be a last resort. After my re-install it took me a week or two to get everything back to where I wanted it! For some reason, the way the computer techs set up my new drives, CC did not populate any of my actions/preferences/etc. I figured a round about way to get my actions to load, but it was a real pain in the butt!! I certainly hope I don't have to do that all over again. Although I will say that even before I got everything reset in photoshop, I was still having problems. The only thing I pulled into a fresh install of CC were the few actions that were giving me problems ( I worked with the defaults until I could figure out how to reconfigure everything). Before and after my changes, CC was still crashing on me and using tons of memory. Just something to keep in mind regarding my preferences being an issue.
Here is the information you requested. Hopefully the answer lies within! I have been in tears many times since April trying to get my CC/computer back to running the way it used to. This has put me SO far behind on editing I've even had to stop taking sessions for now. So I am VERY appreciative of any and all suggestions you can offer!
Adobe Photoshop Version: 14.2.1 (14.2.1 20140207.r.570 2014/02/07:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: AMD CPU Family:15, Model:1, Stepping:0 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 4
Processor speed: 2399 MHz
Built-in memory: 16361 MB
Free memory: 4728 MB
Memory available to Photoshop: 14679 MB
Memory used by Photoshop: 71 %
Image tile size: 1028K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGPUs=1
gpu[0].OGLVersion="3.0"
gpu[0].MemoryMB=2048
gpu[0].RectTextureSize=16384
gpu[0].Renderer="AMD Radeon R7 200 Series"
gpu[0].RendererID=26131
gpu[0].Vendor="ATI Technologies Inc."
gpu[0].VendorID=4098
gpu[0].HasNPOTSupport=1
gpu[0].DriverVersion="14.100.0.0"
gpu[0].Driver="aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64. dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dl l"
gpu[0].DriverDate="20140417000000.000000-000"
gpu[0].CompileProgramGLSL=1
gpu[0].TestFrameBuffer=1
gpu[0].OCLPresent=1
gpu[0].OCLVersion="1.2 AMD-APP (1445.5)"
gpu[0].CUDASupported=0
gpu[0].OCLBandwidth=2.25491e+010
gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.30"
gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[214748 3647]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[1024]
gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[1024]
gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[128]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[29]
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
gpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
License Type: Subscription
Serial number: 96040756894339264519
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\
Temporary file path: D:\Users\Coleen\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
E:\, 930.0G, 665.3G free
D:\, 933.0G, 852.8G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\
Installed components:
   ACE.dll   ACE 2013/10/29-11:47:16   79.548223   79.548223
   adbeape.dll   Adobe APE 2013/02/04-09:52:32   0.1160850   0.1160850
   AdobeLinguistic.dll   Adobe Linguisitc Library   7.0.0
   AdobeOwl.dll   Adobe Owl 2013/10/25-12:15:59   5.0.24   79.547804
   AdobePDFL.dll   PDFL 2013/10/29-11:47:16   79.508720   79.508720
   AdobePIP.dll   Adobe Product Improvement Program   7.0.0.1786
   AdobeXMP.dll   Adobe XMP Core 2013/10/29-11:47:16   79.154911   79.154911
   AdobeXMPFiles.dll   Adobe XMP Files 2013/10/29-11:47:16   79.154911   79.154911
   AdobeXMPScript.dll   Adobe XMP Script 2013/10/29-11:47:16   79.154911   79.154911
   adobe_caps.dll   Adobe CAPS   7,0,0,21
   AGM.dll   AGM 2013/10/29-11:47:16   79.548223   79.548223
   ahclient.dll    AdobeHelp Dynamic Link Library   1,8,0,31
   aif_core.dll   AIF   5.0   79.534508
   aif_ocl.dll   AIF   5.0   79.534508
   aif_ogl.dll   AIF   5.0   79.534508
   amtlib.dll   AMTLib (64 Bit)   7.0.0.249 BuildVersion: 7.0; BuildDate: Thu Nov 14 2013 15:55:50)   1.000000
   ARE.dll   ARE 2013/10/29-11:47:16   79.548223   79.548223
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2013/10/29-11:47:16   79.548223   79.548223
   BIBUtils.dll   BIBUtils 2013/10/29-11:47:16   79.548223   79.548223
   boost_date_time.dll   DVA Product   7.0.0
   boost_signals.dll   DVA Product   7.0.0
   boost_system.dll   DVA Product   7.0.0
   boost_threads.dll   DVA Product   7.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.1.6.30929   2.1.6.30929
   CITThreading.dll   Adobe CITThreading   2.1.6.30929   2.1.6.30929
   CoolType.dll   CoolType 2013/10/29-11:47:16   79.548223   79.548223
   dvaaudiodevice.dll   DVA Product   7.0.0
   dvacore.dll   DVA Product   7.0.0
   dvamarshal.dll   DVA Product   7.0.0
   dvamediatypes.dll   DVA Product   7.0.0
   dvaplayer.dll   DVA Product   7.0.0
   dvatransport.dll   DVA Product   7.0.0
   dvaunittesting.dll   DVA Product   7.0.0
   dynamiclink.dll   DVA Product   7.0.0
   ExtendScript.dll   ExtendScript 2013/10/30-13:12:12   79.546835   79.546835
   FileInfo.dll   Adobe XMP FileInfo 2013/10/25-03:51:33   79.154511   79.154511
   filter_graph.dll   AIF   5.0   79.534508
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   imslib.dll   IMSLib DLL   7.0.0.145
   JP2KLib.dll   JP2KLib 2013/10/29-11:47:16   79.248139   79.248139
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libiomp5md.dll   Intel(R) OMP Runtime Library   5.0
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   LogSession.dll   LogSession   2.1.2.1785
   mediacoreif.dll   DVA Product   7.0.0
   MPS.dll   MPS 2013/10/29-11:47:16   79.535029   79.535029
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   PatchMatch.dll   PatchMatch 2013/10/29-11:47:16   79.542390   79.542390
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CC   CC
   Plugin.dll   Adobe Photoshop CC   CC
   PlugPlugOwl.dll   Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit)   4.2.0.36
   PSArt.dll   Adobe Photoshop CC   CC
   PSViews.dll   Adobe Photoshop CC   CC
   SCCore.dll   ScCore 2013/10/30-13:12:12   79.546835   79.546835
   ScriptUIFlex.dll   ScriptUIFlex 2013/10/30-13:12:12   79.546835   79.546835
   svml_dispmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   tbb.dll   Intel(R) Threading Building Blocks for Windows   4, 1, 2012, 1003
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   4, 1, 2012, 1003
   updaternotifications.dll   Adobe Updater Notifications Library   7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   7.0.1.102
   WRServices.dll   WRServices Mon Feb 25 2013 16:09:10   Build 0.19078   0.19078
Required plug-ins:
   3D Studio 14.2.1 (14.2.1 x001)
   Accented Edges 14.2.1
   Adaptive Wide Angle 14.2.1
   Angled Strokes 14.2.1
   Average 14.2.1 (14.2.1 x001)
   Bas Relief 14.2.1
   BMP 14.2.1
   Camera Raw 8.4.1
   Camera Raw Filter 8.4.1
   Chalk & Charcoal 14.2.1
   Charcoal 14.2.1
   Chrome 14.2.1
   Cineon 14.2.1 (14.2.1 x001)
   Clouds 14.2.1 (14.2.1 x001)
   Collada 14.2.1 (14.2.1 x001)
   Color Halftone 14.2.1
   Colored Pencil 14.2.1
   CompuServe GIF 14.2.1
   Conté Crayon 14.2.1
   Craquelure 14.2.1
   Crop and Straighten Photos 14.2.1 (14.2.1 x001)
   Crop and Straighten Photos Filter 14.2.1
   Crosshatch 14.2.1
   Crystallize 14.2.1
   Cutout 14.2.1
   Dark Strokes 14.2.1
   De-Interlace 14.2.1
   Dicom 14.2.1
   Difference Clouds 14.2.1 (14.2.1 x001)
   Diffuse Glow 14.2.1
   Displace 14.2.1
   Dry Brush 14.2.1
   Eazel Acquire 14.2.1 (14.2.1 x001)
   Embed Watermark 4.0
   Entropy 14.2.1 (14.2.1 x001)
   Extrude 14.2.1
   FastCore Routines 14.2.1 (14.2.1 x001)
   Fibers 14.2.1
   Film Grain 14.2.1
   Filter Gallery 14.2.1
   Flash 3D 14.2.1 (14.2.1 x001)
   Fresco 14.2.1
   Glass 14.2.1
   Glowing Edges 14.2.1
   Google Earth 4 14.2.1 (14.2.1 x001)
   Grain 14.2.1
   Graphic Pen 14.2.1
   Halftone Pattern 14.2.1
   HDRMergeUI 14.2.1
   IFF Format 14.2.1
   Ink Outlines 14.2.1
   JPEG 2000 14.2.1
   Kurtosis 14.2.1 (14.2.1 x001)
   Lens Blur 14.2.1
   Lens Correction 14.2.1
   Lens Flare 14.2.1
   Liquify 14.2.1
   Matlab Operation 14.2.1 (14.2.1 x001)
   Maximum 14.2.1 (14.2.1 x001)
   Mean 14.2.1 (14.2.1 x001)
   Measurement Core 14.2.1 (14.2.1 x001)
   Median 14.2.1 (14.2.1 x001)
   Mezzotint 14.2.1
   Minimum 14.2.1 (14.2.1 x001)
   MMXCore Routines 14.2.1 (14.2.1 x001)
   Mosaic Tiles 14.2.1
   Multiprocessor Support 14.2.1 (14.2.1 x001)
   Neon Glow 14.2.1
   Note Paper 14.2.1
   NTSC Colors 14.2.1 (14.2.1 x001)
   Ocean Ripple 14.2.1
   Oil Paint 14.2.1
   OpenEXR 14.2.1
   Paint Daubs 14.2.1
   Palette Knife 14.2.1
   Patchwork 14.2.1
   Paths to Illustrator 14.2.1
   PCX 14.2.1 (14.2.1 x001)
   Photocopy 14.2.1
   Photoshop 3D Engine 14.2.1 (14.2.1 x001)
   Photoshop Touch 14.0
   Picture Package Filter 14.2.1 (14.2.1 x001)
   Pinch 14.2.1
   Pixar 14.2.1 (14.2.1 x001)
   Plaster 14.2.1
   Plastic Wrap 14.2.1
   PNG 14.2.1
   Pointillize 14.2.1
   Polar Coordinates 14.2.1
   Portable Bit Map 14.2.1 (14.2.1 x001)
   Poster Edges 14.2.1
   Radial Blur 14.2.1
   Radiance 14.2.1 (14.2.1 x001)
   Range 14.2.1 (14.2.1 x001)
   Read Watermark 4.0
   Reticulation 14.2.1
   Ripple 14.2.1
   Rough Pastels 14.2.1
   Save for Web 14.2.1
   ScriptingSupport 14.2.1
   Shake Reduction 14.2.1
   Shear 14.2.1
   Skewness 14.2.1 (14.2.1 x001)
   Smart Blur 14.2.1
   Smudge Stick 14.2.1
   Solarize 14.2.1 (14.2.1 x001)
   Spatter 14.2.1
   Spherize 14.2.1
   Sponge 14.2.1
   Sprayed Strokes 14.2.1
   Stained Glass 14.2.1
   Stamp 14.2.1
   Standard Deviation 14.2.1 (14.2.1 x001)
   STL 14.2.1 (14.2.1 x001)
   Sumi-e 14.2.1
   Summation 14.2.1 (14.2.1 x001)
   Targa 14.2.1
   Texturizer 14.2.1
   Tiles 14.2.1
   Torn Edges 14.2.1
   Twirl 14.2.1
   Underpainting 14.2.1
   Vanishing Point 14.2.1
   Variance 14.2.1 (14.2.1 x001)
   Variations 14.2.1 (14.2.1 x001)
   Water Paper 14.2.1
   Watercolor 14.2.1
   Wave 14.2.1
   Wavefront|OBJ 14.2.1 (14.2.1 x001)
   WIA Support 14.2.1 (14.2.1 x001)
   Wind 14.2.1
   Wireless Bitmap 14.2.1 (14.2.1 x001)
   ZigZag 14.2.1
Optional and third party plug-ins:
   Imagenomic Plug-in Console 1, 2, 0, 0
   Portraiture 2.3.3.0
Plug-ins that failed to load: NONE
Flash:
   Adobe Exchange
   Kuler
Installed TWAIN devices: NONE

New option: "Export XMP when idle"

like many, for performance reason i do not have "Automatically write changes into XMP" checked. yet i am a firm believer that the changes *belong* in the files themselves (for portability), so i must constantly do manual XMP exports when im finished w/ a set.
in my book, "dumb" (not image-specific) manual steps are, well, dumb, and should be removed for an ideal workflow.
therefore, i think it would be cool if LR handled XMP-to-file in a slightly different way -- a new checkbox for:
"Export XMP metadata to files when idle"
...so whenever you leave LR open and you arent doing anything w/ it, it will auto-export all not-yet-embedded XMP changes to the files. this gives you portability, and piece of mind at no manual cost.
just my thought.
matt

> Select only the images you want to write the metadata and/or settings
> to!
that is an added manual step. as i said, dumb (generic) manual steps that dont relate to the images in question are to be avoided.

P67A-C43 / Windows 7 64-bit freezes when idle or during low activity

Greetings,
I've seen a few similar topics regarding freezes when idle or near-idle, but the troubleshooting steps I've tried don't seem to work. My P67A-C43 with an Intel 2500K Core i5 is not overclocked. It is repeatedly freezing in Windows 7 64-bit. It also did this when I was running Vista 64-bit. I also have Mac OS X Lion on this PC, and I never get freezes under OS X. This appears to be something related to how Windows interacts with idling or lower-power states. But I can't figure out what.
I have tried this with windows on a mechanical HDD and with the current SSD - no change.
I have tried running just one RAM module at a time - they both individually exhibit the behavior.
I have tried switching graphics cards from a GeForce 6500 GT to the current Radeon HD 6850 - no change.
I have tried switching power supplies from an Inland Gold 500W to the current OCZ 650W - no change.
I have tried switching from Intel SVID to APS mode stepping - no change.
I have tried switching C-States off - the system didn't freeze, but it got VERY hot under no load. Without C-states turned on, the CPU temperatures quickly reach 95C to 98C.
I've got the latest BIOS, the latest drivers, and everything else I can think of. Any more ideas?

WOW do I feel silly.
I opened the case to take a good look at the processor cooling, and found that the fan/heatsink assembly was not snapped in on one of the posts. The pre-applied thermal paste was only flattened on one side of the copper contacts for the heatsink.
I re-attached and snapped it all back in, and now my BIOS temperature reading is about 55C, whether C-State is on or off. In Windows without much of a load, it was 40-45C with C-States off, and 33-45C with C-States on.
What I've learned:
- double check your connections
- C-States is an amazingly effective system
- Intel makes some darn tough chips. They'll work (sort of) even if you install them wrong.
I'm still not sure if the freezing is fixed - I don't know how long I've been running without a proper heat sink. I'll leave it idling overnight (It's 23:30 here now), and see if it freezes.
Thanks for the help, guys. This is a nice forum.

Continual HD activity, high CPU usage when idle

I got my first notebook, a Compaq V2000, a few weeks ago and have Arch set up pretty well on it but I have a few issues. Even when the machine is sitting idle it sounds like the HD is doing a read (or whatever) about every 5 seconds. This only starts after I log into Gnome and stops if I log out.
I tried a couple of things with hdparm:
If I try 'hdparm -y /dev/hda' the drive goes to standby but immediately spins up again.
'hdparm -B 255 /dev/hda' disables APM and stops the cyclic behavior. This would seem to be good but during the 5 second cycle the drive alternates between quiet and noisy and this leaves it in the noisy state.
I tried to determine what might be causing all this disk activity so I edited lilo.conf to remove "acpi=on apm=off" from the "append=" line and in rc.conf I put a ! in front of all modules and daemons and rebooted. I removed the applets from task bar. No change.
I ran top to see if I could tell what was accessing the HD but I'm not knowledgable enough to make much sense of it. I did notice that on my notebook the top summary shows:
CPU: ~30% user, ~10% system, ~60% idle with 'wait' bouncing between 0 and 5%
On my main computer, also running Arch/Gnome, I get
CPU: ~2% user, ~1% system, ~97% idle with 'wait' solid at 0%
On the notebook, if I run hdparm -B 255 /dev/hda the CPU #'s for user and system remain high but the wait # drops to zero and stays there.
I don't think all this HD activity could be good for my machine, and I know I find it very annoying. If anyone could help me stop all the HD accesses and understand the high CPU usage I would appreciate it.

I loaded lsof and frankly it scared me. It listed what looked like a couple hundred files and I didn't know exactly how to use that information.
Then I tried laptop-mode-tools. The man pages didn't sound too promising since it uses, among other things, hdparm, which I already tried with mixed results. I gave it a try anyway and right out of the box, with no configuration, it worked. HD access when idle dropped to essentially none, the drive spins down and the cooling fan runs much less frequently.
So far all I have changed in the config file are the HD idle timeouts. The default of 5 seconds was starting and stopping the HD too often so I changed that to 20 seconds for now.
Whatever laptop-mode did to stop the 5-second HD accesses the effect persists even if I run 'laptop_mode stop' and '/etc/rc.d/laptop-mode stop'. When I get the time I should be able to use 'laptop_mode status' and laptop-mode.conf settings to determine exactly what the magic bullet was.
Thanks, lucke. I never would have tried laptop-mode on my own because I thought it only duplicated functionality that I already had with hdparm and powernowd.

[Bug] Email - Doesn't check email when it should and plays alert muliple times

There is a bug in webOS 2.0.1 on ither a verizon or unlocked Pre 2 where the email app does not check email when it should. For example, if it is set to "as the arrive" it only checks ever 30 min.
In addition, when emails do arrive it will play the alert tone as many times as there are new emails in the current check. For example if it checks for email and there is 4 new messages the phone tires to play the email alert ringtone 4 times at once.
Post relates to: Pre 2 p102eww (Verizon)

There is a bug in webOS 2.0.1 on ither a verizon or unlocked Pre 2
where the email app does not check email when it should. For example,
if it is set to "as the arrive" it only checks ever 30 min.
Do you have more than one device checking the email acct? If so, please have only the Pre2 getting that email acct using as items arrive (IDLE) and see how that fairs. I can replicate this issue with certain mail providers if I use IDLE on more than one deivce to it. Keep me posted.

Firefox uses up 10% of processor even when idle. Why?

Firefox 3.6 uses at 10% of processor power even when idle, parked on Google. I have McAfee, which uses 5% to 10% on top.
Firefox loses keystrokes. It gobbles up a lot of memory very fast (did not do this before). After about 2-3 hours of surfing, it uses up 6-% to 70% of processor power to the point I have to reboot.

Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

My wifi suddenly wont work on my i4s. i already reset network, forget network, restart, and put it in the refrigerator (coz some people said maybe theres something wrong with the heat of wifi inside ). what should i do?

my wifi suddenly wont work on my i4s. i already reset network, forget network, restart, and put it in the refrigerator (coz some people said maybe theres something wrong with the heat of wifi inside ). what should i do?
but sometimes, it can read,but wont connect.
sometimes it even wont read the wifi .
sometimes, when it can connect, the password already correct, but it didnt want to connect.
it suddenly happened, without i changed the seeetinggs or else.
i read every solutiuon on google., etc2, and tried the way, but it still wont work.
anyone can help ? pleasee ;(

This is a totally absurd suggestion, except that it worked for me with my iPad. Forget the network, then when asked for the password, enter a wrong one. Try again and enter the correct password. Good luck.

[Solved] High load average even when idle after update

Hello arch fellows!
I have a Dell Inspiron N4110 intel i5 4gb ram. I think it is a decent laptop and should run Arch Linux pretty well, right? Well, it does until I run 'pacman -Syu'. After the update, the load average gets over 1.00 even when idle. It hardly gets under 0.40. Before updating, the average is under 0.10 most times. The command top doesn't show me anything. All the processes are practically 0%. It seems to me the problem would be the kernel, am I right? But I tried the fallback option when booting but it is the same.
Does anybody have an idea of what could be the problem? I appreciate any help.
Last edited by sollidsnake (2012-05-18 00:32:52)

Thanks for the reply. It was really a kernel problem. I downgraded it to an older version and it looks normal now

Is it normal for 10-20% cpu to be used when idle and watching activity monitor?

Is it normal for 10-20% cpu to be used when idle and watching activity monitor?
I have a macbook 6,1, 4gb of ram, and my os seems to be spinning the rainbow quite often and laggy. I watch my activity monitor and it never drops below 90% cpu available. Is this normal? if not what can I do to clean up my os. Does anyone have any resources or help? Thanks

Hello:
Answer - no.
The activity monitor should indicate what is consuming the processor when your system is idle.
I just looked at my own system with Safari running and the usage is about 3%.
Barry

To set HOTSPOT for a field in ALV-oops and when clecked should call transac

Hi,
I need to set HOTSPOT for a field in O/P list using ALV-oops and when clecked should take me to Transaction VA01. Please help....
Thanks,
Prabhu

Hi,
Please go through this code it may help u.
REPORT zcls_alv_oops MESSAGE-ID z1.
TABLES : mara.
Types Declaration..\
TYPES :
BEGIN OF t_mara,
matnr TYPE matnr,
mtart TYPE mtart,
maktx TYPE maktx,
END OF t_mara,
BEGIN OF t_marc,
matnr TYPE matnr,
werks TYPE werks_d,
mtart TYPE mtart,
maktx TYPE maktx,
END OF t_marc.
Internal Tables Declaration..\
DATA :
i_mara TYPE TABLE OF t_mara,
i_marc TYPE TABLE OF t_marc,
i_fcat1 TYPE lvc_t_fcat,
i_fcat2 TYPE lvc_t_fcat.
Constants Declaration..\
CONSTANTS :
c_cont1 TYPE scrfname VALUE 'CONT1',
c_cont2 TYPE scrfname VALUE 'CONT2'.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
SELECT-OPTIONS:
s_matnr FOR mara-matnr NO INTERVALS.
SELECTION-SCREEN SKIP 1.
PARAMETERS :
p_hotspt RADIOBUTTON GROUP r1 DEFAULT 'X',
p_bttn RADIOBUTTON GROUP r1.
SELECTION-SCREEN END OF BLOCK b1.
\* Class forward referncing.
CLASS lcl_rcvr_class DEFINITION DEFERRED.
\* Pointers Declaration..
DATA :
lp_rcvr TYPE REF TO lcl_rcvr_class,
lp_cont1 TYPE REF TO cl_gui_custom_container,
lp_cont2 TYPE REF TO cl_gui_custom_container,
lp_grid1 TYPE REF TO cl_gui_alv_grid,
lp_grid2 TYPE REF TO cl_gui_alv_grid.
\* Local Class Definiton.
CLASS lcl_rcvr_class DEFINITION.
PUBLIC SECTION.
METHODS :
hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id e_column_id es_row_no,
handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING e_row e_column.
ENDCLASS.
\* Local Class Implementation.
CLASS lcl_rcvr_class IMPLEMENTATION.
METHOD hotspot_click.
DATA :
wa_mara TYPE t_mara,
wa_marc TYPE t_marc.
DATA :
l_index TYPE sy-tabix.
READ TABLE i_mara INTO wa_mara INDEX e_row_id-index.
IF sy-subrc EQ 0.
REFRESH i_marc.
SELECT matnr
werks
INTO TABLE i_marc
FROM marc
WHERE matnr EQ wa_mara-matnr.
IF sy-subrc EQ 0.
LOOP AT i_marc INTO wa_marc.
l_index = sy-tabix.
wa_marc-mtart = wa_mara-mtart.
wa_marc-maktx = wa_mara-maktx.
MODIFY i_marc FROM wa_marc INDEX l_index
TRANSPORTING mtart maktx.
ENDLOOP.
CALL SCREEN 200.
ELSE.
MESSAGE e121 WITH text-005 wa_mara-matnr.
ENDIF.
ENDIF.
ENDMETHOD.
METHOD handle_double_click.
DATA :
wa_mara TYPE t_mara,
wa_marc TYPE t_marc.
DATA :
l_index TYPE sy-tabix.
READ TABLE i_mara INTO wa_mara INDEX e_row-index.
IF sy-subrc EQ 0.
REFRESH i_marc.
SELECT matnr
werks
INTO TABLE i_marc
FROM marc
WHERE matnr EQ wa_mara-matnr.
IF sy-subrc EQ 0.
LOOP AT i_marc INTO wa_marc.
l_index = sy-tabix.
wa_marc-mtart = wa_mara-mtart.
wa_marc-maktx = wa_mara-maktx.
MODIFY i_marc FROM wa_marc INDEX l_index
TRANSPORTING mtart maktx.
ENDLOOP.
CALL SCREEN 200.
ELSE.
MESSAGE e121 WITH text-005 wa_mara-matnr.
ENDIF.
ENDIF.
ENDMETHOD.
ENDCLASS.
\* Start of Selection
START-OF-SELECTION.
\* Extract the Material Master data for the Input Material.
SELECT a~matnr
a~mtart
b~maktx
INTO TABLE i_mara
FROM mara AS a
INNER JOIN makt AS b
ON a~matnr EQ b~matnr
WHERE a~matnr IN s_matnr
AND b~spras EQ sy-langu.
END-OF-SELECTION.
IF NOT i_mara\[\] IS INITIAL.
\* Call Screen to display the Material Master data.
CALL SCREEN 100.
ELSE.
MESSAGE s121 WITH text-006.
ENDIF.
\*& Module DISP_GRID OUTPUT
\* text
MODULE disp_grid OUTPUT.
\* Build the Field catelog for Material Master data.
PERFORM build_fcat.
\* Display the Material Master data using ALV.
PERFORM disp_alv.
ENDMODULE. " DISP_GRID OUTPUT
\*& Module USER_COMMAND_0100 INPUT
\* text
MODULE user_command_0100 INPUT.
\*when exit or cancel is clicked program has to come out
CASE sy-ucomm.
WHEN 'EXIT' OR 'CANC'.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
\*& Form build_fcat
\* text
\* \--> p1 text
\* <-\- p2 text
FORM build_fcat.
DATA : ws_fcat TYPE lvc_s_fcat.
ws_fcat-fieldname = 'MATNR'.
ws_fcat-scrtext_m = text-001.
ws_fcat-tabname = 'I_MARA'.
IF p_hotspt EQ 'X'.
ws_fcat-hotspot = 'X'.
ENDIF.
APPEND ws_fcat TO i_fcat1.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MTART'.
ws_fcat-scrtext_m = text-002.
ws_fcat-tabname = 'I_MARA'.
APPEND ws_fcat TO i_fcat1.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MAKTX'.
ws_fcat-scrtext_m = text-003.
ws_fcat-tabname = 'I_MARA'.
APPEND ws_fcat TO i_fcat1.
CLEAR ws_fcat.
ENDFORM. " build_fcat
\*& Form disp_alv
\* text
\* \--> p1 text
\* <-\- p2 text
FORM disp_alv.
IF lp_cont1 IS INITIAL.
\* Create the Container Object of Material Master.
CREATE OBJECT lp_cont1
EXPORTING
container_name = c_cont1
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6 .
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Create the Object for Grid of Material Master.
CREATE OBJECT lp_grid1
EXPORTING
i_parent = lp_cont1
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
others = 5.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Dipslay Material Master data by calling method.
CALL METHOD lp_grid1->set_table_for_first_display
CHANGING
it_outtab = i_mara
it_fieldcatalog = i_fcat1
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Set Handler for the Hot Spot Event.
CREATE OBJECT lp_rcvr.
IF p_hotspt EQ 'X'.
SET HANDLER lp_rcvr->hotspot_click FOR lp_grid1.
ELSE.
SET HANDLER lp_rcvr->handle_double_click FOR lp_grid1.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " disp_alv
\*& Module STATUS_0100 OUTPUT
\* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'MAIN_STAT'.
SET TITLEBAR 'T_100'.
ENDMODULE. " STATUS_0100 OUTPUT
\*& Module STATUS_0200 OUTPUT
\* text
MODULE status_0200 OUTPUT.
SET PF-STATUS 'PLANT_STAT'.
SET TITLEBAR 'T_200'.
ENDMODULE. " STATUS_0200 OUTPUT
\*& Module DISP_GRID_plant OUTPUT
\* text
MODULE disp_grid_plant OUTPUT.
\* Build the Field catelog for Material Plant data.
PERFORM build_fcat_plant.
\* Display the Material Master Plant data using ALV.
PERFORM disp_alv_plant.
ENDMODULE. " DISP_GRID_plant OUTPUT
\*& Module USER_COMMAND_0200 INPUT
\* text
MODULE user_command_0200 INPUT.
\*when exit or cancel is clicked program has to come out
CASE sy-ucomm.
WHEN 'EXIT' OR 'CANC'.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
\*& Form build_fcat_plant
\* text
\* \--> p1 text
\* <-\- p2 text
FORM build_fcat_plant.
DATA : ws_fcat TYPE lvc_s_fcat.
ws_fcat-fieldname = 'MATNR'.
ws_fcat-scrtext_m = text-001.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ws_fcat-fieldname = 'WERKS'.
ws_fcat-scrtext_m = text-004.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MTART'.
ws_fcat-scrtext_m = text-002.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MAKTX'.
ws_fcat-scrtext_m = text-003.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ENDFORM. " build_fcat_plant
\*& Form disp_alv_plant
\* text
\* \--> p1 text
\* <-\- p2 text
FORM disp_alv_plant.
IF lp_cont2 IS INITIAL.
\* Create the Container Object of Material Plant data.
CREATE OBJECT lp_cont2
EXPORTING
container_name = c_cont2
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Create the Object for Grid of Material Plant data.
CREATE OBJECT lp_grid2
EXPORTING
i_parent = lp_cont2
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
others = 5.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Dipslay Material Plant data by calling method.
CALL METHOD lp_grid2->set_table_for_first_display
CHANGING
it_outtab = i_marc
it_fieldcatalog = i_fcat2
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ENDIF.
ELSE.
\* Call method 'REFRESH_TABLE_DISPLAY' to refresh the grid data.
CALL METHOD lp_grid2->refresh_table_display.
ENDIF.
ENDFORM. " disp_alv_plant

CRASH "Not enough memory to create clipboard. This should never happen."

CRASH Error message: "Not enough memory to create clipboard. This should never happen."
What the F???
SvK

i was talking to someone at frankfurt about this (possibly logic had crashed on something we were looking at - i don't remember) and they said error messages like that were for the developers. the fact you saw the error message yourself was in itself a bug.
i don't know for sure, but i think you are seeing some kind of bug relating to memory management. try deleting history and reorganizing memory if you get this error a lot.

Memory heat 60*c when idling...should I worry?

Similar Messages

Maybe you are looking for