Memory Issue Bug

Found one critcal bug.
Step to repro:
1. Attach N8 to PC as Mass Storage.
2. Add in or categorize or move image to another folder.
3. Detach N8 in the appropriate way from the PC.
4. Go to Contact in N8 and try to edit by Adding a image. (Pic tagging)
5. The Photo Gallery will show up and scroll all the way down.
6. Memory Error all the way until quitting Photo Gallery.
7. Go to Photo Gallery and let it refresh the photo library.
8. Re-do the same procedure as adding the image to contact.
9. No more memory error.
10. Happen to my wife and my N8.

Hi Prolle,
I was unaware that Snow Leopard lifted a physical hardware limitation imposed by the memory controller on the logic board. Leopard is more than capable of handling 8GB+ configurations (we have, two 12GB Mac Pros in my office that run 10.5.8 like a champ).
Regrettably I was unable to track down the same exact MacBook you to put 8GB into and try to run Snow Leopard via the unit. But I do have a similar machine that also choked with a 2x4GB configuration. The MacBook 13-inch Late 2007, Early 2008 and Late 2008 all list as 4GB max supported by Apple but the ability to go 6GB. The Early 2008 I tested did not show any additional RAM allocation under Snow Leopard.

Similar Messages

Memory issues in java3d1.2(openGL ver) and 1.2.1-03 sdk(openGL ver)

hi ,
i am working in java 3d and handling memory issues .I have made following observations.
In java3d 1.2 version,when we close a primitive ,(transform group,point3d,transform 3d release) about 80% of memory used by the primitive when it was opened.but point4d releases only 2% of memory.
on a contrary when i use java3d1.2-03 sdk point4d releases about 75% of memory and others(transform3d,transform group,point3d ) releases about 40% of memory allocated to them.
can somebody tell me if there is some kind of difference in these two versions related to memory?or is there any memory bug in the later version?
thanks
sangeeta

hi,
We r using memory management tools like Jprobe and optimizer IT to count the rate of memory released.
Thanks
sangeeta

More Yosemite memory issues

Whoa. What is happening here? I've been monitoring the Activity Monitor this
last week, and this evening the memory values seem to be going crazy (see screenshot).
What is backupd and why is it using 51 GB of memory? And why is kernel_task suddenly over 9 GB?
I can feel my MacBook Pro retina late 2013 13" with 16 GB of RAM slowing down, and the "memory pressure" is way up.
I hate having to restart because I have so much work open, but I guess I have no choice.
Any idea what might be happening?
doug

Yes, it must have been a memory issue with Time Machine. I see the last backup was some 9 hours ago, so I guess it has been sitting there twiddling its thumbs since then, eating away at memory.
I restarted. Fortunately it only takes a minute with the SSD drives. All the same apps and windows are open as before, but as you can see in the screenshot, memory is back to normal.
Plus there is no more input lag. Everything is fast again.
It must be a memory leak or something in Time Machine I imagine.
After restarting and forcing Time Machine to "backup now" it finished the backup successfully very quickly. And while backing up it was way down in the list, using only 25 MB of memory.
I think in this case there is no doubt it's another Yosemite memory bug of some kind.
doug

Oracle 11g - memory issue.

hi,
Recently we have upgraded to oracle 11.2.0.1 from 10.2.0.4. Below memory issues shows up and system crashes.
We included parameter MEMORYIMM_MODE_WITHOUT_AUTOSGA=FALSE in init file. Despite this happens.
ORA-04031: unable to allocate 264 bytes of shared memory ("shared pool","unknown object","CCUR^4e9657a","kglob")
Fri May 20 18:43:45 2011
Sweep [inc][64733]: completed
Sweep [inc][64732]: completed
We increased db_cache and shared_pool memory, does not help.
Would appreciate any feedback on this.
Thanks,
RajS

Hi Raj
with experience I noticed these memory issues (ORA-0403 ) issues with 11.2.0.1
say some bugs, which aren't easy to fix.
Better upgrade to 11.2.0.2.
May be not the proper answer to your question Just a tip.
BR
Venkat

IPhoto crashes on Snow Leopard, Memory Deallocation Bug

I have on the order of 10 Macs. I also have several sizeable iPhoto libraries that I work on regularly. The libraries are on removable media that can be moved between different computers (eSata and Firewire drives).
For some reason, many months after Snow Leopard was introduced, I still cannot use any of my photo libraries under the new OS. Every time I try, I get a crash almost immediately. I have reported this bug to Apple many many times. If you look at the stack dump, it is quite obviously a memory deallocation bug that causes a stack overflow. I cannot comprehend how Apple has been unable to fix this 5 months after I first reported it and how it can still be there.
Yesterday, I purchased a brand new MacBook 15" with an i7 processor and a 500GB SSD. I was hoping that the bug in iPhoto or the OS had finally been fixed and eagerly loaded one of my photo libraries onto the built-in 500GB SSD of the new MacBook.
Alas, it took less than an hour to get iPhoto to crash - while it was searching for Faces. This is absurd. I have been using this same library across many different computers running Leopard as recently as two days ago. The library works on any computer running Leopard and crashes any computer running Snow Leopard almost immediately.
Unfortunately, it also doesn't appear to be a specific problem related to the file structure of this particular library. I have at least 4 iPhoto libraries, containing entirely different photos, that all manage to crash Snow Leopard and all run for days of nonstop work on Leopard.
Apple, please fix this. This is ridiculous. Just look at the crash report below and you can see what is wrong. And I have been sending full detailed crash dumps to Apple on this at least 20 times including the full binary.
-- Michael
Process: iPhoto [989]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: 8.1.2 (8.1.2)
Build Info: iPhotoProject-4240000~8
Code Type: X86 (Native)
Parent Process: launchd [134]
Date/Time: 2010-05-08 14:06:38.299 -0700
OS Version: Mac OS X 10.6.3 (10D2094)
Report Version: 6
Interval Since Last Report: 9502 sec
Crashes Since Last Report: 1
Per-App Interval Since Last Report: 1651 sec
Per-App Crashes Since Last Report: 1
Anonymous UUID: 7667D7E3-B8CE-41CD-ABA2-90F1C60BBBA5
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x00000000b0419ffc
Crashed Thread: 8
Thread 8 Crashed:
0 libSystem.B.dylib 0x94e7c017 szonefree_definitesize + 12
1 libSystem.B.dylib 0x94e7bda8 free + 244
2 libobjc.A.dylib 0x92df96e7 internal_objectdispose + 81
3 com.apple.CoreFoundation 0x901088d8 -[NSObject(NSObject) dealloc] + 56
4 com.apple.Foundation 0x93c230c8 -[_NSIndexPathUniqueTreeNode dealloc] + 227
5 com.apple.Foundation 0x93c23076 -[_NSIndexPathUniqueTreeNode dealloc] + 145
6 com.apple.Foundation 0x93c23076 -[_NSIndexPathUniqueTreeNode dealloc] + 145
7 com.apple.Foundation 0x93c23092 -[_NSIndexPathUniqueTreeNode dealloc] + 173
… same line repeated 501 times… !
509 com.apple.Foundation 0x93c23092 -[_NSIndexPathUniqueTreeNode dealloc] + 173
510 com.apple.Foundation 0x93c23092 -[_NSIndexPathUniqueTreeNode dealloc] + 173
511 com.apple.Foundation 0x93c23092 -[_NSIndexPathUniqueTreeNode dealloc] + 173
Thread 8 crashed with X86 Thread State (32-bit):
eax: 0x00000020 ebx: 0x94e7bcc2 ecx: 0x00000000 edx: 0x28659160
edi: 0x015f6000 esi: 0x00000000 ebp: 0xb041a158 esp: 0xb041a000
ss: 0x0000001f efl: 0x00010286 eip: 0x94e7c017 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
cr2: 0xb0419ffc
System Profile:
Model: MacBookPro6,2, BootROM MBP61.0057.B09, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.14.7)
Bluetooth: Version 2.3.2f5, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: APPLE SSD TS512B, 465.92 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000

Do you remember the Terms of Use at all? You agreed to them when you signed up and there's a link to them on the right hand side of every page. As they explain, this is a forum for Users to discuss technical issues with other Users. Apple's developers aren’t here. They don’t promise to read anything here.
I would comment though: that this is not common to other users of iPhoto 09 and 10.6. And, as I'm sure you are aware, that
Exception Codes: KERNPROTECTIONFAILURE at...
is pretty much always a data-related issue.
What format are these removable media?
Regards
TD

TO NOKIA SUPPORT: Application Manager Memory issue...

There is a STRANGE memory issue with Application Manager and Nokia N80 device. It's present in both N80 and N80IE and tried with Firmware versions from v3.x to lastest v4.x one.
When you have installed many programs, tested with more than 150 counting SIS plus JAVA, Application Manager gets unusuable reporting continuosly "Memory Full - Please close apps..." and you can't do anything with it...
This issue happens even after starting device without any resident app loaded and 14 Mbytes of free RAM so I think this is a limited memory issue available for Application Manager
A curious thing is that you can Run and Enter Application Manager and installed App list is showed but not complete, it list all the SIS files installed (I think it start to list that type) and then the JAVA ones is cutted and dont appear the full list of installed apps of this type.
Another curious thing is that if you uninstall a SIS app and Run again Application Manager the list is filled with one more app of JAVA type so this sound like a MEMORY ISSUE or deliberating restricting number of app listed?
Perhaps app listing could be stored in a temp file and partially loaded in pages so memory don't get overheaded... :-?
Today with 1 or 2 GB memory cards, this is a SERIOUS ISSUE.
Please, could you confirm this and point me where to report this issue so it can be solved in future firmware updates?
Many thanks in advance.

So hope i.I'm preparing a bug report to post here.Maybe with our reports the new firmwares will be even better...if some Nokia guy is looking at what we're speaking
Ever dreamed of earning money online without wasting a single cent?Now you can:
http:// tinyurl.com/2pfgv2

IOS memory issues & springboard app crashing

I'm having an issue with my iPhone (and a 2nd level support tech had me run a diagnostic on my iPad and he said it is happening there too). Over the last month I've reset me iPhone four times and been given a new one in an effort to fix this and I'm kind of losing faith here.
What happens with my iPhone is that the battery appears to be off to the races in an effort to get to 0 as quickly as possible. I have all but one application (OmniFocus) with background app refresh disabled. Bluetooth is turned off. Location services are enabled but nothing is using them.
When I go in to see someone at the Genius bar they tele that the Springboard app is crashing and/or I'm having memory issues on my iPhone. Both my iPhone and iPad are running iOS 8.1.2.
Does anyone have any idea why this is happening? My guess is this is a bug in iOS 8 but I'm open to whatever idea will help me resolve this.

There is no "callibration" for the home button. Anyone that tells you otherwise is as full of it as the Genius bar employee that says the button and device are working properly.
To prove it is hardware, restore the device as new. Do not install any apps. Try using the home button. Does it work consistently every time? If it does... there is an issue with an App or something in your backup. If it does not, then there is defnitively a hardware issue.
Press Apple on this to ensure the issue is resolved before your warrnaty is up. Might be as simple as having another Genuis at the Apple store evaluate the device.

CF10 Update 14 and possible memory issues

One of my associates is complaining that since I applied the Coldfusion 10 Update 14 we are experiencing memory issues. Has anyone else had issues with Update 14?
Just a System Admin fighting the good fight!

I’ll throw in that even if changing the JVM helped, it would still leave the question open as to whether/why Chad experienced a change in heap usage on solely updating CF.
Chad, really? Nothing else changed? I just find that so odd. I’ve not yet heard about it (or seen it) being an issue. Of course, update 14 did do quite a bit: beyond bug fixes it also updated Tomcat. I would be surprised that that could lead to memory leaks (assuming that’s what this is, if really NOTHING else changed).
What about the database you’re using? Update 14 did change the JDBC drivers for Postgres. Are you using that DBMS?
Just trying to think what else could contribute to this, if indeed nothing else changed for you.
It is possible that something else changed, either in the config or coding (and you didn’t know it), or perhaps in the load against the server (I see that all the time: someone adds a new site, perhaps brought over from another server, and they assume “it doesn’t get much traffic”, but they don’t realize how heavily spiders and bots may hit that newly added site, which could definitely put pressure on the heap whether from increased sessions, caching, and so on.)
Of course, you can always uninstall the update easily, in the same CF Admin page where you install it. That would help you prove if that alone was it. (Just be sure to rebuild the connectors back to the version as per the CF update you would revert to. I don’t think it’s appropriate to run the update 14 connector with an earlier update.)
Finally, FWIW, if you really wanted to go nuts, you could change CF to using Java 8. That’s another thing added in 14: support of 8. But to clear, it does not “change it” for you, so that’s not what happened here. But just as the two Carl’s proposed changing the JVM to see if it “would help”, you could consider moving to Java 8. That’s all the more worth considering if indeed the issue is that something changed in your environment (config/code/load) and you simply do need more heap (in Java 7).
Of course CF will use the same GC you have specified even if you update it to use 8, so you may need to make some changes to see a real impact. But for instance one thing Java 8 does by default is no longer use the permanent generation. That should have no effect on your your observed use of heap. Just saying that 8 is indeed different, and you never know if updating to it could help (or hurt. It’s so new that CF supports it in 10, and only to come in update 3 of 11, that there’s relatively little known experience about the combination.)
Anyway, do let us know if you find more.
/charlie

Application is not working due to memory issue

Hi Friesnds,
Kindly help me regarding settings in java. Scenario is like that. I have one server having two jboss versions (jboss-4.2.3 GA and jboss- 3.2.6). Each having java memory (JVM settings) 1 GB. The total memory of that server is 3 GB.
Problem is that every two days my application is not working due to memory issue. Once i freed the memory (through run the commands - (1). sync
(2). echo 3 > /proc/sys/vm/drop_caches
Application works fine.
I heared that the above command (echo 3 > /proc/sys/vm/drop_caches) can't run frequently because of server crash.
Kindly help me regarding this issue and provide the resolution.
Let me know if you need more information from my side.
Thanks
Ashish Shukla

All of the above. I tested on 4 different networks and had no luck, I also had friends test my network and the other networks with their iPhones and all had no issues using FaceTime.
Also after I wiped my phone (erased all content and settings) I was able to successfully initiate a FaceTime call with no changes to my network and was also able to initiate another call when connected to another previously tested network that didn't work before. Once I restored from backup though, FaceTime stopped working again.
I did find this discussion: https://discussions.apple.com/thread/5163024?start=0&tstart=0
and tried the suggestions found there too. That discussion describes my issue I am having as well.

How to correct internal memory issue

This is related to the standard SAP program SAPRCKM_MR11 in which there is one include RCKM_MR11F01 which contains a select statement :
SELECT *
     INTO CORRESPONDING FIELDS OF TABLE t_bhistory
     FROM v_ckmlgrir
     WHERE bukrs EQ p_bukrs
     AND   ebeln IN r_ebeln
     AND   ebelp IN r_ebelp
     AND   lifnr IN r_lifnr
     AND   ekorg IN r_ekorg
     AND   ekgrp IN r_ekgrp
     AND   werks IN r_werks
     AND   bedat IN r_bedat
     AND   bsart IN r_bsart
     AND   bstyp IN ht_bstyp
     AND   vgabe IN ('1', '2', '3') "Wareneingang/Rechnung/Nachbel.
     AND   loekz_k NE 'L'            "Loeschkz. Bestellkopf
     AND   loekz_p NOT IN ('L', 'S') "Loeschkz. Bestellposition
     AND ( frgrl   EQ space          "Freigabe unvollständig
     OR    frgrl   IS NULL )
     AND ( memory EQ space          "Bestellung noch nicht komplett
     OR    memory IS NULL )         "falls Feld nicht initialisiert
     AND ( xwoff   EQ space          "Wertbildung offen
     OR    xwoff   IS NULL )         "falls Feld nicht initialisiert
bei Dienstleistungsbestellungen werden mehrfach kontierte
Bestell-Pos. gegen das WE/RE-Konto gebucht, deshalb dürfen
mehrfach kontierte Pos. nicht generell überlesen werden.
      AND   vrtkz   EQ space          "keine Mehrfachkontierung
     AND   wepos   EQ 'X'            "Wareneingang wird erwartet
     AND   repos   EQ 'X'            "Rechnung wird erwartet
     AND   weunb   EQ space          "Wareneingang unbewertet
     AND   stapo   EQ space.         "Item is not statistical
There is one job FMT612P which contains this standard program and the job is going to abend
because of the select statement given above which is because of some memory issue with the internal table t_bhistory, please give us a suggestion how we can avoid the same.

Hi,
I am also facing the same issue. We had copied this report into a custom report and are trying to improve performance by breaking the view into separate queries on EKKO, EKPO and EKBE.
Can someone advise the best way to deal with this view v_ckmlgrir or a best approach to break down the view into separate queries.
Thanks
Edited by: Shreyas Shrikant Kulkarni on Jun 29, 2009 4:56 PM

Memory issue with Podcast !!!

Hi,
I have several issues with the Podcast App.
- i cannot sync podcast that i have downloaded on my laptop using itunes to the iphone,
- when i download some podcast directly on the iphone, i cannot play them, i still have to stream them,
- i have uge memory issues and i think that the downloaded version of the podcast might be somewhere on the iphone, but cannot access / delete them (over 16 GO, i have more than 4.5 GO used for 'other', that are not related to anything...)
i have tried to delete / reinstall the app, but this does not change anything...
Any help ?
Rgds

Quote
I have a MSI 975X Platinum rev 2 mb with a e6300 processor overclocked to 2.24ghz.
If your CPU operates @2.24 GHz, it means that you increased FSB frequency to about 348 MHz.
To make sure there is no misunderstanding here, let me point out the following:
Memory frequency is ALWAYS linked to FSB frequency by the FSB/DRAM Ratio you can select in BIOS. If you select 1:1 for example, the BIOS will show that memory frequency is 533 MHz. This value however, only applies to the default FSB clock speed of 266 MHz:
266 MHz x 1 = 266 MHz (or 533 MHz effective DDR2-frequency).
If your system is overclocked, what counts is only FSB/DRAM ratio, not the memory speed displayed in BIOS. That means, if you set FSB/DRAM ration to 1:1 and FSB frequency to 348 MHz, your RAM will operate @:
348 MHz x 1 = 348 MHz (or 696 MHz effective DDR2-frequency).
The main question is:
What are you talking about when you say, you can't make your RAM operate @800 MHz?
The BIOS does not offer a proper divider to get your RAM to 800 MHz @348 FSB clock speed to begin with.
You have the following choices if your overclock your system:
FSB=300 + FSB/DRAM ratio = 1.33
300 MHz x 1.33 ~ 400 MHz (or 800 MHz effective DDR2-frequency)
FSB=320 MHz + FSB/DRAM ratio = 1:1.25
320 MHz x 1.25 = 400 MHz (or 800 MHz effective DDR2-frequency)
FSB=400 MHz + FSB/DRAM ratio = 1:1
400 MHz x 1 = 400 MHz (or 800 MHz effective DDR2-frequency)
Use CPU-Z to monitor the DRAM frequency that is actually set if you are overclocking.

Memory issues

I have a 2008 Macpro...remarkable up-to -date for its age...I plan to use it for some time yet. Lately I have been a having what seems to be a memory issue. There are 12 gig of Ram installed...6x2 gig each in pairs. Sometimes on boot the screen only shows a flashing folder. I shut down and reboot, and it seems fine...but only 8gig of ram shows installed. I opened it up, unseated the boards that hod the ram, and unseated and reset all he ram, and replaced the boards. Great, all he ram shows, 12 gig again. This morning, a few days later, it did it again, showing 8. So, when I run Crucial's memory analyzer, it shows first four slots full, last four empty. A few questions...are the first four slots the top board, the last four the bottom board? This, BTW, is what it was also showing before I reseated the ram. If so, the ram in question s on a separate board. Opinions, is the ram bad, or the board, or neither? Should I reseat again and flush with contact/tuner cleaner/degreaser? Could this hurt? (it is made to clean electronics) the machine does seem ever so slightly unstable. FCP crashed once in a 5 hour edit, which it has done before but rarely. The machine itself did not crash, just the program. Can using the machine like this do more damage, or will it just not boot? I feel it is a seating or connection issue, as I have never seen ram come and go, once it is fried it's fried. The ram is still pretty pricy, but I was going to buy 4 more gigs just to fill it out. Are the two board that hold the ram identical, top and bottom? If so, is a good diagnostic tool to swap them and see what happens? Move all the ram and swap board positions, or do I risk blowing ram ? Remember, the ram did show up when I reseated, so it seems like it is I damaged. My goal would be to see if top ram stops appearing. Does ram need to be filled in order? I know in pairs, but can I just swap the boards and leave the ram, which should look like filling slots 1,2,5,6,7,8...as opposed to 1,2,3,4,5,6. Can the boards be swapped, or are they set somehow to be 1-4 and 5-8, or is that determined automatically by their upper or lower insertion? Any other advice is appreciated. Funds are low, so I need to keep this machine running. Other info, 3.06ghz (2 quad core) Xeon CPUs, 1tb system drive, 4 TB raid5' OSX 10.6.8 dual graphics display with 512MB (can't remember card model right now). Also, can I update graphic card in this machine? I looked at it a few years ago, but the I for I found was confusing and I never got to it. I figure I might be able to get a better card pretty cheap by now. Thanks all.

You have typed a huge list of ideas all as one paragraph with many questions in it without a single bit of white space. My eyes are not good enough to read a question, attempt to answer it, then dig through the sea of letters to find the next question.
Your writing needs white space, which gives it a peculiar overall shape, and allows a reader with poor eyesight to return to a particular spot in the text. So I will attempt to answer some parts of your query, but will be forced to do so from memory of what you wrote.
The Mac Pro uses Error Correcting Code (ECC) RAM. Eight extra bits are stored with each word, and checked when read back. Single-bit errors are detected, and the check bits are used to make a correction on the fly. More complicated errors are detected, and can cause your Mac to halt on a kernel panic to prevent bad data from propagating.
ECC RAM means your Mac can detect bad memory easily at Startup, and can declare pairs of DIMMs "absent" to avoid using them.
Contact corrosion, which was an issue with much older DIMMs, is rarely an issue with these FBDIMMs. Once re-Inserted ONCE, corrosion will not recur for a year or more.
The upper and lower Riser-cards are identical.
The FBDIMMs in these machines are subject to overheating and death. If Mac OS X or any program reports DIMMs as missing, at least one of the DIMMs in that pair has died (but since they are installed in pairs, both are marked absent).

Question for those with memory issues on k8n neo plat

I have been having issues with my memory on the k8n neo platinum board since i built the system last month and i just recently discovered a fact I had overlooked.
I Have discovered that if i test the system while it is cool (having sat turned off overnight for example), then memtest will pass the ram just fine and the system will be stable for a short period of time, generally longer if no intensive applications are used, ie. doom3 vs. websurfing).
This system, once it heats up ( seems mostly to be the nvidia 3 nb that needs to be "hot"- that is, a probe placed in contact with the module reaches about 58+ degrees c) then the system becomes unstable and memtest, if used, fails.
Prime95, if used on it when its cool, will usually take about an hour or so to fail, but if its used on the system when its been running a bit ( temps from nb at 58c+ and memory module hot to the touch) then it fails after about 20-30 seconds.
I have placed an active hs on the nb in an attempt to correct this, but temps still remain high with failures occuring.
I have spent the better part of three days testing the sytem this way and the above facts have held true in all these tests.
I have tested at stock ratings ( not using "auto" in bios, but using "approved ratings" of 10 x 200 for fsb and timings of 2-3-3-7 for my ram at 1:1 (which is recommended as well) since i am testing for base stability at this point;Voltages have been left at auto settings, however.
I was wondering if anyone else with memory issues could try this out and post if this seems to be the case for you as well.
Perhaps the memory issues on these boards are directly related to a problem with the nvidia 3 chipset running too hot?
Does anyone have a memory issue with these boards who is using water cooling on the NB ?
Lack of issues from people using 'problem" memory, but having no failures with water cooled nb's would support my assumption.

Yes i did mean chipset.
I am using a stock hs/fan from amd, which seems to run a tad hot but, considering that I wont overclock until I can get board stable, its not an issue. (runs 35-40 idle and up to 72 intensive). I need the warranty more then the extra mhz at present.
I removed the stock heatsink from the nvidia chipset and bought a generic chipset cooler (green, very little in the way of fins and seems to be aluminum) with a small fan.
I used a generic silver paste from Compusa to adhere both the cpu hs and the chipset.
I didnt lap either hs, just installed each as per instructions on artic silvers website (figured it had to go on the same way even generic).
I also bought a kingwin thermal center which i ran probes from to the cpu, case, and nb chipset.
I am not using it to adjust fans so those arent connected - its just a reference temp I can see at a glance, esp considering the funky bios reading this boards been known to give.
I assume from these responces that even a nvidia 3 250 chipset shouldnt get as hot as mine?
I asked about that from the retailer i bought this from but he seemed to think it was "ok" at 50ish celcius, but then again he didnt look too confident when he said it, lol.
Idle right now reads on Corecenter at 28 celcius for cpu and 33 celcius for the chipset, although, I have readings of 37 c and 43 c from the kingwin thermal center, which i believe to be more accurate.
My voltage reads at 11.67 for the 12v line at idle right now.
The psu i got is stick from the xblade case i bought in store. (http://www.xoxide.com/xblade2.html)
I have a dvd burner, cd drive, and two maxtor ide hd's attached to the system;The only card is the agp.
Is there a way to check and see if the cpu ispower starved? software monitor or even an external probe perhaps?
I havent put a probe on it, but the ram came in its own heatspreader, which gets very hot to the touch as well.
What temps should I be looking for on these items?

Firefox 3.6.8 and memory issues

After the last update to 3.6.6, I disabled plugin-container per the instructions given on the forum, and my RAM problems went away. However, after the automatic update to 3.6.8, the memory problems came back, with memory usage going up to 92%. I downgraded to 3.6.4, and turned plugin-container off again; while memory usage is currently at 84%, it is not as low as it was before the upgrade to 3.6.8. (79-80%) (There is very little difference in the websites being opened on the various tabs.)
== This happened ==
Every time Firefox opened
== I upgraded to 3.6.8

ffs guys. It's a free browser. It's cool. We love it. But can we do something about memory issues? Almost every release has huge memory leaks.
How about halving the release points and focus on memory issues for the other half of the time. I am a long time user since way back in the day and it seems to me that instead of trying to release so many versions, we should be focused more fixing the current release.
I say put a moratorium on new features until bloat can be fixed. These experiences are starting to give me a hardon for IE again.
Screw new features. I can deal with plain old tabs like they are. I don't need more bells and whistles. This browser has been kicking ass and taking names for a loonnnggggg time. We don't need more bloat. Keep the security fixes coming but everything else can wait. Take a breath. Stop and smell the roses for a few weeks.

Regarding Memory issues((error) while scheduling the job

Hi Friends
I am facing memory issue while rerunning BODS jobs in production.As we have rapid mart when jobs got failed i rerun the
job suddenly job got failed and in logs i found Memory issue
please help me what i have to do in steps
Thanks

I think there is no one solution to buffer pool issue. Buffer pool issue happens due to many reasons like how you design the data flow, requirement of push down or even insufficient memory in the running environment.
You can check by checking 'collect statistics for optimization' during running the job. Also in the data flow, try changing from pageable cache to memory cache by right clicking and selecting properties. The below link give some details on caching, might be helpful.
https://wiki.sdn.sap.com/wiki/display/BOBJ/CachinginDI
Arun

Memory Issue Bug

Similar Messages

Maybe you are looking for