Memory leaks in NSURLConnection when using with ssl.

Hi,
I am experiencing a memory leak while using nsurlconnection with https request.
I have a web-service over http and as well as HTTPS. When i call the web-service with HTTP i don't get any memory leak while when I call the web-service over HTTPS i got memory leaks, responsible library for this memory leak is cfnnetwork and responsible caller is nsurlrequest::setsslrequest.
I just wanna make sure that should we have to set any property in nsurl for HTTPS request..
I will be really helpful If someone can help me out.
thanks in advance.

I get the same(Or similar) issue... 48 Bytes for every call is being leaked. Instruments says that it's NSURLConnection that's leaking an NSString somewhere... Blowed if I can find why, build and analyse doesn't complain about that piece of code (Except that I'm releasing the url request late... i.e. by the caller instead of the method that allocates it. Naughty I know, but autorelease'ing the object had the same problem).
This is on the simulator BTW...
H

Similar Messages

Will the memory leak for queue when used in producer and consumer mode in DAQ to transfer different sized array.

In the data acquisition, I use one loop to poll data from hardware, another loop to receive the data from polling loop sent by queue.
But everytime the size of the transferred data array may not be the same, so the system may assign different array size and recycle very frequently.
Will it cost memory leak. Or will it slow down the performance, since the array size is not fixed, so every time need to create a new sized array.
Any suggestion or better method.
Solved!
Go to Solution.

As i understand your description, your DAQ-loop acquires data with the setting '-1' for samples to read at the DAQmx read function. This results in the different array sizes.
Passing those arrays directly to a queue is valid and it does not have significant drawback in performance (at least as far as i know) and it definetly does not leak memory.
So the question is more or less:
Is it valid that your consumer receives different array sizes for analysis? How does your consumer handle those arrays?
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Memory leak when "Use JSSE SSL" is enabled

I'm investigating a memory leak that occurs in WebLogic 11g (10.3.3 and 10.3.5) when "Use JSSE SSL" is checked using the Sun/Oracle JVM and JCE/JSSE providers. The leak is reproducible just by hitting the WebLogic Admin Console login page repeatedly using SSL. Running the app server under JProfiler shows byte arrays (among other objects) leaking from the socket handling code. I thought it might be a general problem with the default JSSE provider, but Tomcat does not exhibit the problem.
Anyone else seeing this?

Yes, we are seeing it as well on Oracle 11g while running a GWT 2.1.1 application using GWT RPC. Our current fix is to remove the JSSE SSL configuration check, however this might not be an option if you really need it for your application. Have you found anything else about it?

Memory leak in JCO when calling an ABAP-function that returns larg tables

Hello everybody,
I think discovered a memory leak in JCO when the calling functionions that have exporting tables with large datasets. For example the ABAP-function RFC_READ_TABLE, which in this example I use to retrieve data from a table called "RSZELTTXT", which contains ~ 120000 datasets. RFC_READ_TABLE exports the data as table "DATA".
Here a simple JUnit test:
http://pastebin.ca/1420451
When running it with Sun Java 1.6 with standard heap size of 64mb I get a heapsize OutOfMemory error:
http://pastebin.ca/1420472
Looking at the heap dump (which I unfortunately cannot post here, because of it' size), I can see that I've 65000 char[512] array objects in my heap, which don't get cleaned up. I think, each char[512] array stands for one dataset in the exporting table "DATA", since the table contains 120000 datasets, the heap is full after the first 65000 datasets are parsed. Apparently, JCO tries to read all datasets in memory instead of justing reading the dataset to which the pointer (JCoTable.setRow(i)) currently points to and releasing it from memory after the pointer moves forward ...
Did anybody else experience this?
Is SAP going to remove to issue in upcoming versions of JCO?
regards Samir

Hi,
Check Below links
1) How To Analyze Performance Problems JCO
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3fbea790-0201-0010-6481-8370ebc3c17d
2) How to Avoid Memory Leaks
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c3e598fe-0601-0010-e990-b8622840c8c2
Salil...
Edited by: salil chavan on Jun 2, 2009 5:21 AM

Memory leak in a client using EJBs deployed in a Bea Weblogic 10.0.0 cluste

Hi all,
We are having a memory leak in a client using stateless EJBs deployed in cluster. The client is a Tomcat 6.0.18 with java 6 but it is reproduced using Tomcat 5 with java 5. The client is calling a Weblogic Server 10.0 making
calls to an EJB deployed in cluster that has two instances installed in two different machines.
The client works fine if we shutdown one of the server instances and so when the client is using only one instance.
Resuming the environment:
Client Side:
1 HP-Itanium machine with HP-UX.
1 Tomcat 6 with java 6 (reproduced with java 5)
Bea Weblogic client (wlclient.jar) for Weblogic 10.0.0
Server Side:
2 HP-Itanium machines with HP-UX
Bea Weblogic Server 10.0.0 installed in both machines
An unique domain
Two Bea instances (one per machines) associated to a Bea Cluster
EJBs deployed in both instances
We have monitored the memory consumed in Tomcat and we have noticed that the VM memory PS OLD GEN grows up permanently when we make tests having the two server side Bea Instances up. We have extended
the memory VM parameters in Tomcat client till 1G and it's only a way to delay the end: the free memory is empty, the GC is not able to free no more byte and the CPU is 100% consumed by the GC work. At the end Tomcat Client
doesn't accept more http petitions and must be restarted.
Besides, we have studied the VM memory in Tomcat using jmap and importing it using Eclipse Memory Analyzer. We have seen some strange memory blocks of several Mbytes that are always growing up and that are stored
under data structures in the package com.sun.corba:
com.sun.corba.se.impl.legacy.connection.SocketFactoryConnectionImpl (4.5Mb)
|
-> com.sun.corba.se.impl.transport.CorbaResponseWaitingRoomImpl
|
-> java.util.Hashtable
|
-> java.util.Hashtable$Entry
|
-> java.util.Hashtable$Entry
-> java.util.Hashtable$Entry
-> java.util.Hashtable$Entry
Has anybody any idea about this problem?
Thanks in advance.

Hi all,
We are having a memory leak in a client using stateless EJBs deployed in cluster. The client is a Tomcat 6.0.18 with java 6 but it is reproduced using Tomcat 5 with java 5. The client is calling a Weblogic Server 10.0 making
calls to an EJB deployed in cluster that has two instances installed in two different machines.
The client works fine if we shutdown one of the server instances and so when the client is using only one instance.
Resuming the environment:
Client Side:
1 HP-Itanium machine with HP-UX.
1 Tomcat 6 with java 6 (reproduced with java 5)
Bea Weblogic client (wlclient.jar) for Weblogic 10.0.0
Server Side:
2 HP-Itanium machines with HP-UX
Bea Weblogic Server 10.0.0 installed in both machines
An unique domain
Two Bea instances (one per machines) associated to a Bea Cluster
EJBs deployed in both instances
We have monitored the memory consumed in Tomcat and we have noticed that the VM memory PS OLD GEN grows up permanently when we make tests having the two server side Bea Instances up. We have extended
the memory VM parameters in Tomcat client till 1G and it's only a way to delay the end: the free memory is empty, the GC is not able to free no more byte and the CPU is 100% consumed by the GC work. At the end Tomcat Client
doesn't accept more http petitions and must be restarted.
Besides, we have studied the VM memory in Tomcat using jmap and importing it using Eclipse Memory Analyzer. We have seen some strange memory blocks of several Mbytes that are always growing up and that are stored
under data structures in the package com.sun.corba:
com.sun.corba.se.impl.legacy.connection.SocketFactoryConnectionImpl (4.5Mb)
|
-> com.sun.corba.se.impl.transport.CorbaResponseWaitingRoomImpl
|
-> java.util.Hashtable
|
-> java.util.Hashtable$Entry
|
-> java.util.Hashtable$Entry
-> java.util.Hashtable$Entry
-> java.util.Hashtable$Entry
Has anybody any idea about this problem?
Thanks in advance.

Test runner freezing when used with Dynamics CRM (and other apps) - Both applications freeze and never come back...

We are trying to use test runner with dynamics CRM.
MS Dynamics CRM will freeze and will not respond (even after 10 - 15 minutes). When this happens, the test manager will either freeze or a message will apear saying "waiting for application under test".
We are not recording action recordings...This makes using test manager impossible. It happens consistently, starting with slowing the PC down (mouse moving slowly, slow to load in new screens, drop downs etc) eventually leading to the app freezing.
Tried on windows xp, windows 7 etc on various specs of pcs.

I am experiencing this same issue with
Test runner freezing when used with Dynamics CRM. I notice this was first posted in June of 2010 and so far no
resolution? I was wondering if it could be related to memory issues? Do you have any troubleshooting ideas? The
issue for me seems to be sporadic and I can't
reproduce it every time.
The message I get is "waiting on application under test".
DLM

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

adobe42135678 wrote:
the audio does not play when hosted on a website...
When viewing in what browser?

ExecuteNonQuery doesnt return number of rows affected when used with PL/SQL

ExecuteNonQuery doesn't return number of rows affected when used with PL/SQL but returns -1. The documentation says ExecuteNonQuery method of OracleCommand returns the number of raws affected but when used with PL/SQL, it returns -1 even the update statement successfully executes and affects multiple records with no exeptions thrown.
However, if ExecuteNonQuery is used with update sql statement in the asp.net code it returns number of rows affected correctly. Does anybody know why ExecuteNonQuery behaves like this?
I am using ODP.NET that comes with Oracle Client 11g. The version is 2.111.6.20 of ODP.NET, Oracle database server is 10g.
Marat

You can get the rowcount in the stored procedure via SQL%ROWCOUNT and then pass it out as a parameter.
For example:
SQL> create or replace procedure updatesal(v_deptno in number, v_rowsaff out number) as
2 begin
3 update emp set sal = sal * 5 where deptno = v_deptno;
4 v_rowsaff := SQL%ROWCOUNT;
5 end;
6 /
Procedure created.Cheers

Quicktime Player with the magic mouse, when used with a bug -

On 10.7 Lion, Quicktime Player with the magic mouse, when used with a bug …
Quicktime Player will not respond, but use the USB mouse with no problem

Message was edited by: b j t

Msi x99 gaming 9 ack does not detect capture card when using with xsplit

msi x99 gaming 9 ack does not detect capture card when using with xsplit
i install every but still it does not work.

Hi
It wasn't hard to find your motherboard version:
http://www.msi.com/support/mb/Z68AGD80_B3.html#down-bios
Since your BIOS is v20.1, it couldn't be G3
Apart from checking BIOS, you can only check motherboard or moth...

Camera is hanging when using with flash

Hi Lenovo Team,
In lenovo vibe x2, camera is hanging when using with flash.Getting "Lenovo snapit isnt responding" error and screen hanged for sometime.after that when tried to open camera "Cannt cannot to camera " error is coming till when restart the phone.
Even tried Factory reset and software update.
Please provide the solution for the above issue.
Thanks,

Hi vijayprabhu,
I just tested the X2 however am not having the issue. I set flash to always on then took a picture using SnapIt however its fine.
Please check if you have the latest firmware S125.
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

Memory leak in OCI while using AQ

There seems to be a serious memory leak in the OCI driver (9.2.0.1) when using a JAVA client to dequeue a database queue (Advanced Queuing).
Continuous dequeuing causes the heap memory to increase, and this memory never gets freed which leads me to suspect a memory leak in the OCI components (as the memory allocated for the JVM is constant). The heap memory increases by 3-4 MB after a dequeue of 1000 RAW messages,
Has anyone come across this problem before and if so are there any solutions? Changing to a thin driver is not a solution for me due to other requirements.
I'm using using Oracle client v9.2.0.1 libraries running on Solaris 8.
The source code for my JAVA test client is as below:
/* JAVA dequeue */
package com.ubsw.risk.pce.eventqueues.test;
import oracle.AQ.*;
import java.sql.*;
import oracle.jdbc.*;
public class testRawDequeue {
public testRawDequeue() {
public static void main(String[] args) {
Connection conn = null;
AQSession aq_sess = null;
try {
Class.forName("oracle.jdbc.driver.OracleDriver");
//Use OCI connection
conn = DriverManager.getConnection("jdbc:oracle:oci:@DB_NAME.world","user","password");
conn.setAutoCommit(false);
Class.forName("oracle.AQ.AQOracleDriver");
while(true) {
aq_sess = AQDriverManager.createAQSession(conn);
runTest(aq_sess);
aq_sess.close();
aq_sess = null;
System.gc();
} catch (Exception e) {
e.printStackTrace();
System.out.println(e.toString());
try {
if (aq_sess != null) {
aq_sess.close();
if (conn != null) {
conn.close();
} catch (SQLException sqle) {
public static void runTest(AQSession aq_sess) throws AQException, SQLException
AQQueueTable q_table;
AQQueue queue;
AQMessage message;
AQRawPayload raw_payload;
AQEnqueueOption enq_option;
String test_data = "new message";
AQDequeueOption deq_option;
byte[] b_array;
/* Get a handle to a queue - in aquser schema: */
queue = aq_sess.getQueue ("user", "raw_msg_queue");
System.out.println("Successful getQueue");
/* Creating a AQDequeueOption object with default options: */
deq_option = new AQDequeueOption();
/* Dequeue a message: */
message = queue.dequeue(deq_option);
System.out.println("Successful dequeue");
/* Retrieve raw data from the message: */
raw_payload = message.getRawPayload();
b_array = raw_payload.getBytes();
System.out.println("bytes:" + b_array.toString());
queue.close();
((AQOracleSession)aq_sess).getDBConnection().commit();

This sounds very similar to the memory leak I have in Oracle 9i using Pro*C++. Everytime a connect is made memory appears to leak and it only happens in multithreaded mode not default mode. There is a thread about this under the Oracle C++ call interface. Under 9i it appears to leak about 60K per connect rather than 60 bytes.
Paul

Possible memory leak in e4x or HTTPService with e4x format

Hello,
I think I have found a memory leak in e4x.
In very special cases (=xml) the player swallows the memory.
The little test program connects to a web server for an xml
file, and the result is converted to an array.
The array is displayed in a DataGrid.
There are two files:
leaktest.xml doesn't leak in any cases (format: e4x or xml)
pbentries.xml leaks when the format is e4x.
Choose e4x format and check Use "Leak" file! Than the program
leaks.
For the whole test case (mxml file, html file and xml files)
please contact me at
[email protected]
or
[email protected]
and I send a zip file as soon as possible.
Probably there is a bug in my test program. If so than please
send me a feedback.
Thanks,
Lacito
------ For the program cut here ------
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:Script>
<![CDATA[
import mx.managers.PopUpManager;
import mx.core.Application;
import mx.controls.Alert;
import mx.rpc.events.FaultEvent;
import mx.rpc.events.ResultEvent;
import mx.rpc.http.mxml.HTTPService;
protected var records_:Array = null;
protected var httpService:HTTPService = null;
[Bindable("recordsChange")]
public function set records(_records:Array):void
this.records_ = _records;
var e:Event = new Event("recordsChange");
dispatchEvent(e);
public function get records():Array
return records_;
protected function getXML():void
var resultFormat:String = cbResultFormat.selectedItem as
String;
var params:Object = new Object();
httpService = new HTTPService();
httpService.concurrency = "single";
httpService.showBusyCursor = true;
var lastIndex:int = url.lastIndexOf("/");
var fileName:String = null;
if(chbUseLeakFile.selected)
// It leaks... :(
fileName = "pbentries.xml";
else
// It doesn't leak... :)
fileName = "leaktest.xml";
var _url:String = url.substr(0, lastIndex+1) + fileName;
httpService.url = _url;
httpService.resultFormat = resultFormat;
httpService.method = "POST";
httpService.addEventListener(ResultEvent.RESULT,
processResult);
httpService.addEventListener(FaultEvent.FAULT,
processFault);
httpService.send(params);
protected function processResult(e:ResultEvent):void
var resultFormat:String = cbResultFormat.selectedItem as
String;
removeListeners();
if(resultFormat==mx.rpc.http.HTTPService.RESULT_FORMAT_XML)
setArrayFromXMLNode();
else
setArrayFromXML();
destroyHttpService();
// format= "e4x"
protected function setArrayFromXML():void
var xml_:XML = httpService.lastResult as XML;
var ar:Array = new Array();
var x:XML = null;
var xl:XMLList = xml_.phonebookEntries[0].phonebookEntry;
for each(x in xl)
var record:Object = new Object();
var prop:XML = null;
var props:XMLList = x.children();
for each(prop in props)
record[prop.localName()] = prop.toString();
ar.push(record);
records = ar;
// format= "xml"
protected function setArrayFromXMLNode():void
var xml_:XMLNode = httpService.lastResult as XMLNode;
var ar:Array = new Array();
var x:XMLNode = null;
var xl:Array = xml_.lastChild.childNodes;
for each(x in xl)
var record:Object = new Object();
var prop:XMLNode = null;
var props:Array = x.childNodes;
for each(prop in props)
record[prop.localName] = prop.firstChild!=null ?
prop.firstChild.nodeValue : null;
ar.push(record);
records = ar;
protected function destroyHttpService():void
httpService.clearResult(false);
httpService.disconnect();
httpService = null;
protected function processFault(e:FaultEvent):void
removeListeners();
Alert.show(e.fault.faultString, e.fault.faultCode);
destroyHttpService();
protected function removeListeners():void
httpService.removeEventListener(ResultEvent.RESULT,
processResult);
httpService.removeEventListener(FaultEvent.FAULT,
processFault);
protected function collect():void
// Garbage Collection
try
new LocalConnection().connect('foo');
new LocalConnection().connect('foo');
catch(e:*)
]]>
</mx:Script>
<mx:ArrayCollection id="alRecords" source="{records}"
/>
<mx:Label x="10" y="10" text="Result format:"
id="lResultFormat"/>
<mx:ComboBox x="104" y="8" id="cbResultFormat">
<mx:Array>
<mx:String>e4x</mx:String>
<mx:String>xml</mx:String>
</mx:Array>
</mx:ComboBox>
<mx:DataGrid id="dgRecords" x="10" y="36" width="936"
height="437"
dataProvider="{alRecords}"
verticalScrollPolicy="auto"
horizontalScrollPolicy="auto">
</mx:DataGrid>
<mx:Button x="355" y="496" label="Get xml" id="btnGetXML"
click="{getXML();}" />
<mx:Button x="155" y="496" label="GC" id="btnGC"
click="{collect();}" />
<mx:CheckBox x="276" y="10" label="Use
"LEAK" file:" labelPlacement="left"
id="chbUseLeakFile" selected="true"/>
</mx:Application>

Hello,
After 3 months (and a new version of flex and flash player)
my test program is still leaking.
If somebody could confirm the leak it would be appreciated.
Thanks,
Lacito
P.S.: I heard that Adobe had donated ActionScript 3 VM to
Mozilla.org. Should I disturb them with my problem?

Severe Memory Leak in Mavericks When Downloading

I have a Macbook Pro running 10.9.3 with 10 gigs of RAM. The RAM works fine and checked out fine in AHT. Since updating to 10.9.3 when I download things from Steam, iTunes, Mac App Store, etc. the available memory goes significantly down when only running one of the programs at a time. It gets to dangerously low points around 7-8 MB available (monitored by memory clean and activity monitor.). The faster the internet connection, the faster the memory is depleted. It's like its downloading to ram and then writing to disk instead. When it gets too low I purge the memory through a terminal program I wrote as it clears up more memory than memory clean.
Even after cleaning the memory it still depletes fast if I'm downloading something. However If I'm not downloading anything on those apps they use little to no memory at all.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Memory leaks in MFC while using CDatabase::OpenEx()

Hi,
This question has been asked previously but the explanation was not in detail and i could never reach to the bottom of it.
I hope i can elaborate more on the problem statement and i can get a resolution/explanation from the experts here.
Consider the following two sample codes;
1.
int count = 200;
for (int i=0; i <count; ++i)
try
CDatabase *db = new CDatabase;
BOOL bRes = db->OpenEx(_T("DSN=MyData;UID=anon;PWD=pass"));
db->Close();
delete db;
db=NULL;
catch (CDBException* e)
e->Delete();
2.
CDatabase *db = new CDatabase;
int count = 200;
for (int i=0; i <count; ++i)
try
BOOL bRes = db->OpenEx(_T("DSN=MyData;UID=anon;PWD=pass"));
db->Close();
catch (CDBException* e)
e->Delete();
delete db;
db=NULL;
return 0;
delete db;
db=NULL;
The first sample code leaks a lot of memory and it can be easily observed from the task manager, the memory usage keeps on growing.
The second sample code does not leak any memory if i observe the memory usage from the task manager.
To find out the cause of the memory leak i ran the code through rational purify, both the codes are leaking memory according to rational purify. The first code leaks significantly more memory than the second one. The DLL pointed by rational purify are MFC
DLLs (inserting the screen shot below)
Is this a known issue with the MFC DLL or am i doing something wrong?
I have a server application where i have to create CDatabase object multiple times and i end up leaking a lot of memory over a period of time.
I can provide more information about this issue if required. Thanks in advance.

I am trying to reproduce this issue on my side, but it seem there is no memory leak in my simple sample. I use _CrtDumpMemoryLeaks() to test the memory leak.
https://msdn.microsoft.com/en-us/library/d41t22sb.aspx
If I comment this line: db->Close();
I can detect the memory leak at CDatabase
*db =
new CDatabase;
See the screenshot.
If follow your sample code, there is memory leak message in the output view pane.
#define CRTDBG_MAP_ALLOC
#include <stdlib.h>
#include <crtdbg.h>
#ifdef _DEBUG
#define new DEBUG_NEW
#endif.....int CMFCCdbMLTestApp::ExitInstance()
// TODO: Add your specialized code here and/or call the base class
_CrtDumpMemoryLeaks();
return CWinApp::ExitInstance();
May you can use some use tool like WinDbg tool to find more information about this issue.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Memory leaks in NSURLConnection when using with ssl.

Similar Messages

Maybe you are looking for