Memory limitation work around

Hello, I'm working on a project that has 4 compositions of roto brushing that are time stretched to run faster and then all brought into another composition to add effects. When I try to export this I get a memory error. I assume it's just too much my machine to handle. Is there a way I can segment this so the processing is done differently? Can I export the roto brushing into a separate file and just use it as footage? Is there a way to export so the background is gone (like what roto brushing does)?
Thanks for any help you can provide.

You have given little specific information. We need to know a lot more to help you. Please provide answers to the questions listed here:
http://forums.adobe.com/thread/961743

Similar Messages

BizTalk 2006 map page limitation work around

Hi
I have run into the 20 pages per map limitation in BizTalk. When I go to add another page in
my map the button is grayed out.
What is the best way to get around this problem? I am thinking of creating another
Transform shape underneath my current one and continuing with my 21st map in my
scope. But I don't think this is the way to go.
Thanks !! <o:p></o:p>
Greg

I think the best way would be one of the following:
-Get all of your logic to fit inside the 20 pages
-Use Custom XSLT (if you need 20+ pages, I assume your map is pretty complex and here custom XSLT can sometimes be easier)
-Upgrade to 2010 where more pages are available
I wouldn't split my mapping into two map ever!
Morten la Cour

FIrefox betrayed by its own "developers"? Memory Leak Work Around at Bottom

Firefox SUCKS memory and holds onto it. Try this test: Open it, leave ONE tab, open and sit back and and watch the damn thing crash.
Funny, as soon as the project people started getting so much money from Google that they had to restructure to avoid losing its non-profit status Firefox developed an insatiable thirst for RAM that has only gotten worse in the YEARS since. They won't fix the problem, they won't acknowledge the problem, the ignore every post about it . . . . So, is killing FF's user base the price for the continued Google money that they so quickly whored themselves out for? Has FF been run by Google these last few years? They certainly couldn't wreck any better.
Posted by Wahoo at https://support.mozilla.org/en-US/questions/939920
"Using ADD-ons to remove memory leak. Mozilla says to remove add-ons to fix leak. Firefox sucks memory. it always has and always will. Nobody wants to admit it exsists on the Mozilla side must less fix it. Firewalls , etc do not cause the leak. You can remove all your ad-ons and leave firefox open and it will suck memory. Every tab you open drains your memory and continues to climb without opening any more. You can then close all your tabs and Firefox will not release the memory. Just fix it guys, it cant be that difficult "
Posteby Onmicide at https://support.mozilla.org/en-US/questions/939920
"There is a way to stay on top of the memory usage:
Go to about:memory and scroll to the bottom. There are buttons there for garbage collection and minimizing memory usage. "

Please try this two minute test.
'''Create a new Firefox profile'''
A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should have completely fresh settings databases and a fresh cache folder.
Exit Firefox and start up in the Profile Manager using Start > search box (or Run):
firefox.exe -P
Any time you want to switch profiles, exit Firefox and return to this dialog.
You'll click the Create Profile button. I recommend using the default location suggested, and to avoid data loss, not re-using any existing folder. Then start Firefox in the new profile you created.
What happens with memory usage with the two default tabs open, or another tab of your choice?
When returning to the Profile Manager, you might be tempted to use the Delete Profile button. But... it's a bit too easy to accidentally delete your "real" profile, so I recommend resisting the temptation. If you do want to clean up later, I suggest making a backup of all your profiles first in case something were to go wrong.

JSPC try/catch size limitations , work-arounds ? CR094190

Hi Folks:
          When a problem occurs during JSPC Compilation because of the size of the generated
          try/catch block, are there any suggestions or patches?
          As I was typing this, a colleague stopped by and said there are patches for this under
          CR094190. Instead of aborting the message, I figured this would be more useful.
          Wayne Scott
          Liberty Corner, NJ


          U can move some of the codes to the new jsp and u can include the new jsp in
          your original one.What i mean is that spit your JSP and use include tag. and
          run.
          Thanks
          "Wayne W. Scott" <[email protected]> wrote:
          >Hi Folks:
          >
          >When a problem occurs during JSPC Compilation because of the size of
          >the generated
          >try/catch block, are there any suggestions or patches?
          >
          >As I was typing this, a colleague stopped by and said there are patches
          >for this under
          >CR094190. Instead of aborting the message, I figured this would be more
          >useful.
          >
          >Wayne Scott
          >Liberty Corner, NJ
          >

I can no longer manually select podcast episodes to download. It automatically downloads the most recent. I have been downloading a few episodes at a time due to the limited memory of my Shuffle. Is there a work-around?

I can no longer manually select podcast episodes to download. It automatically downloads the most recent. I have been downloading a few past episodes at a time due to limited memory of my Shuffle. Is there a work-around for this?

Similar problem here. My Ical refuses to edit or delete events. Viewing is possible, though sometimes the whole screen turns grey. Adding new events from mail is still possible. The task-pane completely disappeared. My local apple technic-centre messed about with disk utility for a bit and than told me to reinstall leopard. I could of course do that, but it seems to me that reinstalling Leopard just to fix iCal events is a bit invasive.
I tried also tried removing everything, installing a new copy of iCal from the leopard-cd, software updates, all to no avail.
At the moment I'm open to all suggestions that do not include a complete leopard reinstall.

Work around for User ID 32 character limitation in CCX Agent?

Are there any kind of creative work arounds for getting past the ridiculous 32 character limit when logging into the CCX Agent?
We are moving toward using the User Principal Name (UPN) in CUCM LDAP which means that the domain is now tacked onto the end of their existing User IDs. We are doing this so that users from multiple domains can authenticate to various Cisco tools and apps. It works very well, except when firing up the Agent!
I've already been playing around with UPN suffixes, and while I can get them to show up in CUCM (and subsequently), I can't seem to get them to authenticate.
I shouldn't even have to get this creative, just remove the 32 character limit, Cisco!
We are running CCX 8.5 and CUCM 8.6

Hi ,
I am not aware about any such workarounds.
After referring to the below guide,
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/configuration/guide/uccx851ag.pdf
On page 78, it is mentioned as,
Caution : When logging into Cisco Agent Desktop, agents use the Unified CM user ID and password. While the Unified CM limits agent IDs to 128 alphanumeric characters, the Unified CCX limits agent IDs to 31 alphanumeric characters. Be sure to abide by the 31 character-limit when configuring agents in Unified CM.
I am sure even if it works by some workarounds also, you may see some issues specially from the CAD\CSD\CDA side, which Cisco will not support it quoting the same above reason.
Hope it helps,
Anand
Please Rate helpful posts !!

Work around for 60 column limitation

All,
Does anyone know of a work around for the 60 column table limitation?
Will this be changed in a future release?
Thank you.

I also need a workaround for this. I have users that want to download data as excel files, and the built in export to csv was working great until the dynamic sql statement pushed itself to more then 60 columns. Is there some other way to provide a link to the data as csv? Can I hook into the csv functionality of HTML DB? Can I create a page template that modifies the Content-Disposition and/or Content-Type so the browser thinks the page is csv/excel so that I could dump out a clob of data I put together? Should I just have a button that provides a link to something outside HTML DB to query and dump data from the database?
As it is, the users really don't need to see the data on the screen. I just need a way to dump 60+ columns of data to the user as csv.

Work around for spry:repeat="ds1 ds2" limitation

I need to have both data sets repeat when using a Spry repeating region:
<div id="apDiv4" spry:region="ds1 ds2">
    <table class="sprytable" border="1">
      <tr>
        <th spry:sort="Q#">Q#</th>
        <th spry:sort="Category">Category</th>
        <th spry:sort="Question">Question</th>
        <th spry:sort="You">You</th>
      </tr>
      <tr spry:repeat="ds1 ds2">
        <td>{ds1::Q#}</td>
        <td>{ds1::Category}</td>
        <td>{ds1::Question}</td>
        <td>{ds2::You}</td>
      </tr>
    </table>
</div>
If I use ds1 in the spry:repeat, ds1 data will repeat (but ds2 will use the first value); or if I specify ds2, ds1 will use the first value.
I need them both to repeat.
I have spent so much time in forums, etc. and can't seem to find a workaround.
My only work around is to combine ds1 and ds2 and reload them together from the server - yuk!
ds1 is fixed and large. ds2 is small and dynamic so reloading really sucks.
Following are the ds Vars - probably irrelevent:
var ds1 = new Spry.Data.HTMLDataSet(null, "rsfamily", {sortOnLoad: "Q#", sortOrderOnLoad: "ascending" }); ds1.setColumnType("Q#", "number"); var ds2 = new Spry.Data.HTMLDataSet("youranswersIRtab.php", "youranswerstab", {}); I will worship the person who gives me an idea.
Thanks

Thanks V1, timkho and coolsanwa for your thoughts. Since you've been so patient (and understanding) let me briefly tell you what I'm trying to do.
I'm considered good at multi-dimensional databases and have recently fallen in love with DreamWeaver to build a pretty complex site so I don't have to be a real expert at PHP, Spry, Ajax, JavaScript, DOM, HTML, CSS etc (I suck, but most everything is working).
I wish I could point you to a site but I need to keep it secret for a bit - its strictly on my PC for now.
Let me explain the snippit, which I still don't have working .
ds1 has three columns and ds2 has one.
ds1          ds1               ds1                         ds2               ds3
Q#          Category         Question                 You               Compare1
1          Boats               How big?                    24               36
2          Boats               What color?               Blue               Red
3          House               Number rooms?          3                    6
4          House               Sq feet?                    1000               3000
5          House               Have garage?               No               Yes
etc to 200+
ds1 doesn't change and I don't want to reload it
ds2 are your saved answers (I will have a form to fill in and a Submit- different subject)
ds3 is user selected comparisons, retrieved from a MD database (academic because ds2 has me stopped).
Category has table row classes (to whole row), which will drive Tabbed Panels.
ds1, ds2, ds3 data have the class assigned to each row (setRowSelector) classes for columns(setColumnSelector).
I want a Spry Table with its many neat features (eg. sorting) that combines the 3 ds's (lets worry about 2 for now).
Incredibly simple but I'm stuck.
Timko suggestion results in syntax error- removing single quotes.
Collsanwa suggestion creates new columns so repeat is done for each row after You column:
24,Blue,3,1000,No
24,Blue,3,1000,No
24,Blue,3,1000,No
24,Blue,3,1000,No
24,Blue,3,1000,No
24,Blue,3,1000,No
200+ times
(I'll repeat the snippit) . Could you point me to an explanation for the spry:if id/mmid
Thanks so much.
<div id="apDiv4" spry:region="ds1 ds2">
    <table class="sprytable" border="1">
      <tr>
        <th spry:sort="Q#">Q#</th>
        <th spry:sort="Category">Category</th>
        <th spry:sort="Question">Question</th>
        <th spry:sort="You">You</th>
      </tr>
      <tr spry:repeat="ds1">
        <td>{ds1::Q#}</td>
        <td>{ds1::Category}</td>
        <td>{ds1::Question}</td>
        <td spry:repeat="ds2" spry:if="'{ds1::id}' == '{ds2::mmid}'">{ds2::You}</td>

      </tr>
    </table>
</div>

Memory limitation on 32-bit Server 2000 pltfrm

Looking for the definitive explanation of why/what is limiting the ability to allocate more than 1/2 of the available system memory to Oracle SGA & PGA. Specifically: 4GB total system RAM on a MS Server 2000 32-bit system platform. Unable to appropriate/allocate more than 1/2 (2GB) of memory to Oracle 9.2.0.4 processes - SGA & PGA. I've read some discussion that Windows appropriates certain amounts - perhaps half - of all available RAM on 32-bit systems. e.g. 2GB total RAM results in 1GB to Server 2000 system processes and 1GB available to Oracle. Is this thinking on the right track.
Need Oracle to utilze more memory. Can anyone offer or point to an explanation of this limitation..... a work around
Thanks,
-- rl

Following an excerpt of Note 225349.1 in MetaLink
"Implementing Address Windowing Extensions (AWE) or VLM on Windows Platforms"
AWE Memory implementation on Windows 2000
A common question on the Windows NT/Windows 2000 platform revolves around
how to take advantage of systems with more than 4 GB of RAM. As discussed
in Metalink NOTE:46001.1 and NOTE:46053.1, the 32-Bit process address
space for any process on Windows equates to a total of 4GB of addressable
RAM. Of this, by default, 2GB is reserved for the process itself, and 2GB
for the kernel. On systems running either Windows 2000 Advanced Server,
or Windows NT 4.0 Enterprise Edition, this ratio can be changed by adding
the /3GB switch to the boot.ini, allowing a process to address 3GB and
reserving 1GB for the kernel. However, the total addressable memory for
a single process is still only 4GB.
See also Note:1036312.6 : Utilizing Up to 3GB Virtual Memory on Windows NT Server 4.0

[Universal Apps] Working around XamlRenderingBackgroundTask restrictions

Hi,
I'm still trying to wrap my head around the introduction of the XamlRenderingBackgroundTask for Universal apps. I'm currently planning my next app and I want it to have custom XAML bitmaps on tiles. Now I have a few questions on this:
All samples and references recommend to write the XamlRenderingBackgroundTask in C++. While I'm generally not opposed to that, I still have a few problems regarding to accessing the app's functionality while rendering the tile. E.g. I want to get
the newest updates from a server and calculate locally on what I should show on the tile. The same functionality is used within the full app and is written in C#, and I think implementing the whole functionality in C++ would be a lot of work (server
communication, SQLite and Linq usage). This
sample here shows one implementation of the XamlRenderingBackgroundTask but it is fairly limited in functionality because it only displays in time.
I have thought of a two possibilites to work around the XamlRenderingBackgroundTask restrictions and I wanted to get some opinions on what the best way would be:
Create two background tasks, one in C# and one in C++. The C# background task calculates the data that will be used and stores it locally for the C++ background task.
The problem here is: Will the memory/CPU quotas hit the limit here? How can I guarantee the sequence (First C#, then C++)?
Store the C# logic in a WinRT component and reference it from the C++ background task.
I can't imagine this works, because the C# component will load the CLR runtime and I will hit the memory limit.
Also I have another question regarding background tasks:
Are the memory restrictions cummulative or is 16 MB on a 512 MB RAM phone device an upper limit that shall never be exceeded? E.g.:
I create an image and update the tile which takes 14 MB. If I flush the tile correclty etc. do I again have 16 MB to work with or only the remaining 2 MB?
The reason I ask is, because I wanted to allow the user to pin multiple (secondary) tiles to the start screen. If I only can create a tile once, it could never update (with XAML images) the other tiles.
I'd be thankful for any thoughts on this.

Hey, thanks for the replies so far!
I don't control the server side, so I can't create the image there and push it to the device.
I definitely want to create it in a BackgroundTask, otherwise there would be no value to these Live Tiles. Now, I did some digging around and played with the XAMLRenderingBackgroundTask types in both C# and C++. I created a sample app, which monitors
the memory usage of a C++ and a C# background task and saves the results to files in the pictures library whenever the time zone is changed. You can download the source code here:
Download solution
My findings:
1. If you have two separate Background tasks registered (e.g. one C# and one C++) and both tasks are run at the same time the limit will sum up, e.g. I got 60 MB as a limit and not 30, which is nice :) This means, that I can go ahead with the two
Background tasks mailbox scenario, which will only result in a small time delay.
2. Weirdly, it appears that the memory usage of the C# Background task is sometimes lower than the C++ one. Also, I never really got the C++ one below the C# Background task. Both Background tasks inherit from XamlRenderingBackgroundTask,
but I never really try to render an image, is this the problem? Otherwise, I fail to see the reason why I can't use the XamlRenderingBackgroundTask on low memory devices ...
Sample results from the tasks:
C#
Limit: 40
Current usage: 3.296875
Usage after memory allocation: 8.59375
Concurrent: false
C++
Limit: 40
Current usage: 4.50781
Usage after memory allocation: 9.63672
Concurrent: false
C#
Limit: 60
Current usage: 6.0703125
Usage after memory allocation: 6.4921875
Concurrent: true
C++
Limit: 60
Current usage: 6.12109
Usage after memory allocation: 11.6563
Concurrent: true
Limit 40 means the debugger is still attached, otherwise the limit is 30 because I have a Lumia 925.
Any ideas?

Memory limitation on T61

I have the following Lenovo notebook :
Product: ThinkPad T61 8898-55G [change]
Operating system: All [change]
Original description: T7100(1.8GHz), 1GB RAM, 120GB 5400rpm HD, 14.1in 1024x768 LCD, Intel X3100, CDRW/DVDRW, Intel 802.11abg wireless, Bluetooth, Modem, 1Gb Ethernet, UltraNav, Secure chip, Fingerprint reader, 4c Li-Ion, WinVista Business 32
I configured my Notebook with a Dual-boot Windowx XP Pro SP3 and Windows Vista Bussines SP1 (32 bit)
I have 2x 512 MB PC2-5300 667 MHz DDR2 memory inside.
I read on the Lenovo site :
Memory Compatibility
(**) Windows Vista supports up to 4GB maximum memory (32-bit versions of Windows Vista cannot support 4GB). Windows XP supports up to 3GB maximum memory
I like to update my memory with
2x 40Y7734 1 GB PC2-5300 667 MHz DDR2
or
2x 40Y7735 2 GB PC2-5300 667 MHz DDR2
I like to know if I choose for 2x 2GB , will :
Windows XP SP3 work just fine only it works with 3GB instead of 4GB installed memory
Window Vista SP1 (32-bit) with the 4GB (even not supported) work stable ?
Because the prices of 1 GB and 2 GB won't change much nowadays.
I prefer to use 2x 2GB modules, but I like to know will it work (even with the memory limitation) stable on XP or on Vista
or it is better/safer to use 2x 1GB modules
Can anybody help/explain me or advice me ?
Electronic
Message Edited by electronic on 01-16-2009 09:51 PM

You're better off with 2x2GB, you may decide to run a 64-bit OS someday...and you will notice a difference between 2GB and 3GB when running a 32-bit OS.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Insane XML Import, Huge Project, Duplicate file names work around...

I planned on kicking off my journey attempting to edit a massive multi year documentary on FCPX with a nice introduction of the blog I'm going to keep about the experience, but I've run into a bit of a roadblock, or maybe major speed bump at least before even getting to that point. I wanted to share what is working as a work around for me and you guys can tell me how I'm doing it wrong.
Ok, I will try to explain this as succinctly as possible. I'll write in somewhat stream of consciousness just to try and get through it quicker... Basically, after discovering the work around below, I am now utterly confused on how FCPX handles the relationship between its own database of where media is stored, and the actual media itself. I have plenty experience on FCPX now, probably done 30-40 pro commercial jobs on it over the last year since XML became doable as I'm also a Resolve Colorist and all the FCPX projects where hardcore coloring product spots. For commercial work, I never needed to worry about splitting up footage up over multiple Events. Everything, all in one, FCPX handled it no problem. (well the occasional beach ball, but that seems to be a thing with FCPX in general)
This will be my 10th feature documentary as an Editor. Every one before it was either on Avid's many flavors over the last 12 years or FCP Studio. When this new film came along, I made the decision a few months ago to use FCPX for a few reasons, but mostly because I'm insane and I like to try to mix it up for myself in a career that can get stale quick if you aren't willing to be that way. The film was shot over 2+ years, every shoot was multi cam 5D (yes i know, looks great, but please kill me), I haven't done the math on length, but there is over 10,000 clips of video (this is actually medium in size compared to what I've dealt with before). Its 5D, so theres external audio for everything. FCPX's syncing is great, but I've learned that theres an unsaid window of heads and tales clips must fall within to sync properly with the nearby clips, if they are too far apart FCPX gives up. One shoot day could have 3 cams, 50 clips each, and 2 audio files to sync to, FCPX simply cannot handle this, so off to Plural eyes they went, no problems.
Ok, all this is relevant eventually I swear! Again, in the past, all in one event, no problem. I tried for fun to bring all media into one Event on this film. It worked, but there is a 10+ second spinning beach ball for every single move you make, so thats no good. Ok, I'll separate the Events out to, lets say, each shoot month. Well that's dumb, in verite documentary, any shot could be the first, any shot could be the last, you need a command over all searchable footage at all times. Shift selecting all events to search *****, and it actually takes longer for FCP to reload each event each time than it does to just have the one massive one. So no go there. Next hair brained idea... What if make a new Event that is just Compound Clips of all the other Event's contents and do more with Markers and Favorites in logging that I was planning to parse it all out. That way I'm working with and FCPX is dealing with 50-60 clips instead of 10,000+ Quick test, Cmd-A, Opt-G, boom, boom, boom, move all to dedicated to Event, hide huge Event, BEHOLD, that works! FCPX chokes a little bit on the insane length of some of the clips, but searching, and general performance is back on par!
So your saying to yourself "Ok *********, sounds like you figured it out, what's the problem." Well to you I say, "Not so fast!" Remember, that was just a quick test using the media I had imported into the massive 10,000+ clip Event. To do this project proper, I am having to import Multicam sync'd XMLs from Plural Eyes. And this is where it all starts to fall apart. A little foreshadowing for your eager eyes. 10,000+ files all shot with multiple 5D's over the course of years. What does that mean? many, many duplicate file names!
FCPX as well all know irritatingly imports XML's as new Events, not into existing ones. This obviously takes a lot of burden off media management because with a new Event comes a new database referencing its own version of the raw media. All well and good, and I'm betting its starting to click for some if you advanced users where I'm finally going with this. So I have 50 or so XMLs to bring in, all done no problem. Now I want to replicate that singular Event like I did with the Compound Clip test and have it all in one place to be my master as extensive logging begins for easy searching once editing begins. Highlight the Events, click Merge Events. NOPE. I get a new "Kill Yourself Now" error (a term I coined for Out of Memory and General Error messages in FCP Legacy meaning there ain't much you can do about it): "Two or more files have the same name. Change the names and try again, because I don't know what the **** to do with them." Ok I made up that last part but that's basically what it's saying. Just take the variable out of the equation, this happens with every which way you could try to get the clips together. Merge Events, dragging events on top of each other, dragging just the Multicam clip alone, nothing gets passed that message. What's worse is that while Batch Renaming seems like a solution, the renames do not populate inside the created clips and there is no way to Batch Rename those. Renaming everything at the finder level isn't so great because then I'd have to resync and theres an offline/online thing going here where the film has to be reconformed eventually.
Basically, I've found that FCPX handles media management in completely different ways depending on whether you are importing into one Event yourself or doing essentially what is a new import with FCPX moving or merging Events. If you bring in all the media to one Event, on a macro level FCPX goes through file by file making aliases referencing the master file. If it hits a duplicate, it makes a parenthesis counter, and keeps going. And with the genius of FCPX metadata, that file name doesn't even matter, you can change it at the Finder level and FCPX will keep the link intact. BUT for some reason if you try to do this outside the realm of a single Event and combine files after the fact a different process takes over in creating this database system and can't handle the duplicates. I can't totally figure the reason other than it probably is scared to change the originally referenced alias to something else (which it shouldn't be scared of since Merge Events deletes the original anyway).
This is where it gets INSANE and where I lose all understanding of what is going on, and believe me it was a delicate understanding to begin with. It comes in to play with the work around I figured out. I make the master Event with the 10,000+ clips. Then I import all the XMLs as dedicated Events. Now, I then drag the Multicam clips into the master Event, it WORKS! just takes it, no "Kill Yourself Now" error. Stranger still, now with the switched referenced Event, it even takes into account which aliased duplicate file name it's referencing in the Original Media folder. Somehow, it's taking into account the original file path and saying "Ok, I see 5 instances of MVI_5834.mov. Based on the original file path or maybe creation date or god knows what, it must be MVI_5834 (fcp3).mov." It connects perfectly. I can even remove the old XML imported Event with no problem. Crazier yet, I can now move those again to the dedicated Event I wanted originally that only contains those Multicam or Compound Clips.
So instead of going straight from A to C, going from A to B to C works even though that actually seems way more complicated. Why can't FCPX handle Merge Events and dragging clips the same way it handles media imported into a single Event. And weirder still, why can't FCPX handle the (fcp1,2,3...) appending in the same scenario. But if the appended links are already there, No Problem. And for the love of god, it'd be nice to important XML's into existing Events and make the correct referencing happen right from the get go, which is really the source of all the above headache. I'd have no problem helping FCPX with a little manual pointing in the right direction just like any other NLE needs.
Ok, having said all of that crap above, my question is, have I missed something completely simple I should have done instead? Now that I have everything in place how I originally envisioned, I think I will still play around a little bit more to make sure FCPX is really going to be able to handle this project. I'm at a stage right now where going another direction is still an option, although the dare devil in me wants to make this work. Media management aside, once you start editing on a FCPX timeline, its hard to go back to anything else. Apple is going to have to figure out some way not to access to everything at all times to work fluidly or big projects like this are never going to be practical in FCPX.
Sorry for the long confusing post....

I'm having the exact same problem, but I know nothing of ruby scripts. I've exhausted my resources with tech support, and after literally hours of work with them it seems I now am faced with either re-rating each individual song, or pointing iTunes to each song that it can't locate. Is yours a solution that could help me? How can I find out more about Ruby Scripts? Thanks for your help, hellolylo (or anyone else who might also be able to help...)
Kenn

The App Store asks to "verify" my personal information, For my name, state, credit card, etc. I don't even live in the US and I don't have a CC, nor do I want to give away my personal information. I just want to download free apps. Any work-arounds?

Title says it all.
I'm really getting sick of websites getting more and more into your business. Google forcing you to get a G+ account and asking for your identifying information, for example (like your phone number).
It's extremely irritating, and I'm opting out of everything that enforces the such. If Apple begins pushing like this, I will just close my relationship with the company and obtain apps by using third-party software to force them onto the phone.
But before going that far, I'd like to find work arounds.
First of all, I don't even know why it asks me for my "state". I don't even live in the USA anymore, as I moved to China (though I won't use the Chinese store as I don't speak or understand the local language, which is Chinese).
All I want... is to continue using the English App Store to get free apps from here in my home in China, without getting stopped by Apple asking for more info on me. I don't want to share my name, I don't want to share my address, and I can't even complete the form as I no longer have a "state" and don't have any credit info.
So that's just that. If there's no way around it I'll find another way to install apps without the App Store.
Sorry for the message tone, I'm just really irritated with the way the internet is getting.
Thanks in advance!
- Alex

The living issue is complex in my case. Legally speaking, I have no personal residence globally. I just live wherever my father goes, which is everywhere. I'm an expat and it seems that these sites aren't really expat-friendly. They seem to be built for localization and assume everyone stays in the same place.
I don't know what I'd be considered. I'm a US passport holder and live in China, but I only speak some Chinese and I can't read it (it using non-latin characters is just too much for my mind's memory to handle). Besides that, I'm not interested in popular Chinese apps. They tend to just be annoying and kooky and generic and put together badly, often full adware and spyware (speaking for most Chinese software, in fact). In fact, a lot of apps I want are illegal in China (YouTube, Facebook, etc) and I use a VPN to use the services. I assume I wouldn't find these apps on the Chinese store. In fact, last I checked, there wasn't many English apps on the Chinese app store. This is probably due to their strict moderation or something.
I've been going to international schools since I got here and college would be in English too. I can speak some Chinese, but not read it.
Well, I guess the answer is that I can't use the App Store in English. So I guess I'll just sign out everything on my phone involving my Apple account and just start using third-party tools to do my business.

ABAP+JAVA STACK STARTING ISSUE a Work Around

Dear Users,
I recently got an issue in duel stack where in Java stack was not coming up. According to the Trace file i was about to follow the SAP Note: 940893. But everything was fine for me. Then i tried a work around. I started Java first and then after sometime ABAP. It worked for me. Might be useful for others as a work around. If useful make know. If i am wrong again let me know.

Hi Manjesh,
Then i tried a work around. I started Java first and then after sometime ABAP. It worked for me.
It looks like Server has insufficient memory to hold ABAP+ JAVA stack.
You can think of the following
1) Reduce the no of WPs in ABAP stack
2) Reduce the JAVA memory settings to half using configtool
3) Restart both ABAP and JAVA
4) Check the results.
Hope this helps.
Regards,
Deepak Kori

FCPX 10.0.7 hangs when loading multiple projects - a non-destructive work around

FCPX 10.0.7 hangs when loading multiple projects - a non-destructive work around....
Hi Guys, I upgraded from FCPX 10.0.6 to 10.0.78 and discovered to my immense frustration that many of my 100+ FCPX projects would not load.
Symptom:
FCPX 10.0.7 appears to hang ("spinning beachball") with either high CPU% on a single core or with 1-2% CPU busy (activity monitor.app) when a FINAL CUT PROJECT is selected. No logs error information in /var/logs ..hmm
notices that the "status circle" spins around endlessly.
Actvity Monitor.app shows "Final Cut Pro (Not Responding)
and also I notice in some cases that an OEM filter ("NEAT VIDEO NOISE REDUCTION") is in progress to be loaded. FCPX V10.0.7 must be FORCED QUITtted to remove it from system.
History: Upgraded FCPX from V10.0.6 to V10.0.07.
"FINAL CUT EVENTS" and "FINAL CUT PROJECTS" on a single file system on SAS 16TB disk array (768MB/sec read via AJA system test) and 60% utilised capacity… FCP EVENTS has 400 events in it .. some 5.2TB of Prores essence etc .. all works fine! (i.e. the storage system is first class and is NOT the issue)
32GB of RAM on MAC PRO 2009 Nehalem 16 x Vcore with ATI 5780 card and ATTO HBA's (i.e. plenty of resources!)
As usual with any "upgrade" to FCPX 10.0.? all the EVENT objects need to be upgraded. In my case this takes an hour or two.. so I do that when asleep.
After experiencing above, I restored the FCPX EVENTS LIbrary of that file system from LTO4 tape archive (BRU-PE ) and still had the same issues as above.
WORKAROUND:
FORCEd QUIT FCPX V10.0.7
RENAMEd "/volumes/some_file_system_volume/Final Cut Projects" to "/volumes/some_file_system_volume/Final Cut Projects_original"
created (make) a new "/volumes/some_file_system_volume/Final Cut Projects" (use finder)
For each project !!! in "/volumes/some_file_system_volume/Final Cut Projects_original", (do one project at a time!!!)
MOVE "/volumes/some_file_system_volume/Final Cut Projects_original/one_fcpx_projext_nnnn_folder" to "/volumes/some_file_system_volume/Final Cut Projects"
Make sure you move ONLY one project at a time. If you have a subfolder of projects, please do each project one at a time (serially!)
Launch FCPX V10.0.7 and BE PATIENT!!! .. DONT click or fiddle with the UI.. it seems when you intervene it locks up as well…
Let FCPX V10.0.7 settle….
select the project you just added above and RELINK any objects it needs. Thumbnails and proxies will be rendered again.. just be patient
wait until ALL the rendering as stopped.
QUIT FCPX V10.0.7
(now if FCPX locks up, just force it out and start again as above).
repeat for all projects in "/volumes/some_file_system_volume/Final Cut Projects_original" (go to step 4 ad do until all projects moved)
When all is COMPLETED MAKE SURE YOU ARCHIVE an instance (or make a backup ) of "/volumes/some_file_system_volume/Final Cut Projects"
If this procedure has worked the folder "/volumes/some_file_system_volume/Final Cut Projects_original" will have zero (nill, none) projects in it.
I have managed to restore ALL my "/volumes/some_file_system_volume/Final Cut Projects" this xmas between drinking etc. I'm satisfied that its all ok.
Other issues:
use DISK WARRIOR or TT PRO 6 to make sure that the file system volume where your "/volumes/some_file_system_volume/Final Cut Projects" are is physically ok. I noticed some entries in file system's volume table that represented objects in "/volumes/some_file_system_volume/Final Cut Projects" were at fault when I used these utilities… FWIW.
SUMMARY: yes this took ages to d, however luckily I had everything in at least 3 instances in an archive which has saved me many time in the old FCP& and prior days… it was just a matter of time to put it back together.
I put this outage down to may be my own impatience when I first fired up FCPX 10.0.7 after the upgrade.
I'm interested if this workaround is helpful to others and in addtiion if others have a more satisfactory remedy.
HTH
warwick
Hong Kong

Hi Eb, yeah I could not see any "memory leak" or unusual consumption of REAL memory whose less availability would cause excessive PAGEing and SWAPping as seen in the Activty Monitor.app
I watch this carefully especially the use of REAL MEMORY by 3rd Paryy apps. BTW there are a few that cause ALLOCATED but NOT USED memory (blue in the A.M.app UI). Simply a unix PURGE command can release that memory and help clean up the PAGE and VM swap files (its alleged!).
Yes, you may be might with the element of "Luck" involved. I would add though, that having MULTIPLE project displaying in the STORYLINE window and loading always caused my FCP 10.0.7 jam up at startup with h symtoms and observations I described.
TIP: I might also add that for a super speedy launch of FCPX one may also emply setting each PROJECT's UI to show only AUDIO thus negating the need to contstruct or reneder out a PREVIEW ui in each clip in the storyline.
Your/Apples suggestion of the movememt (rename) of "Final Cut Pro Projects" to "Final Cut Pro Projects Hidden" is similar to what I proposed above to stop FCPX 10.0.7 accessing and building it up at startup. This workaround has been useful inthe past as well.
ALso one might also get the stick out and remove (delete/rm) the ~/Library/Saved Application State/com.apple.FinalCut.savedState in one's home ~/Library so that FCPX wont do such a neat job reinstating FCPX last time you crashed it... This has been helpful also in diagnosing my issues.
Lastly I have noticed that:
impatience clicking on the FCPX UI when in the unstable state causes it to lock up with NO visible CPU% busy.... as if its waiting on something which is usually me MEMTERMing it via FORCE QUIT and
the projects where I have employed the NEAT VIDEO Noise Reduction OEM filter for FCPX seem to exasserbate the PROJECT loading issues when several PROJECTS are available at FCPX startup time.
As of yesterday I have some 400+ EVENTS Final Cut Pro Events and 130+ projects of varying compexites in a single file system on Final Cut Pro Projects all working fine and as good as gold again!
Oh and one more thing, I had to RE-RENDER many projects of them again... strange as the FCP PROJECT library was renstated from a recent LTO archive as of V10.0.6 FCPX.. strange that...I would have expected if the projects and events were 10.0.6/7 compatable as proposed by Tom, that this would not be necessary... hmm straneg that
I'll monitor this thread.
Thanks for your comments lads!

Memory limitation work around

Similar Messages

Maybe you are looking for