MEMORY_MANAGEMENT Issues with newly built PC.

Hey guys,
I just had a new PC built and it was working great for about a month and a half. I use it mostly for Gaming. Yesterday I got a MEMORY_MANAGEMENT crash while just being on the web. Today, I was searching though folders on my PC when I got
the cash again. It seems to be random and not related to anything I'm doing specifically.
I don't know where to start so maybe you guys can help me out? I'm currently updating all my drivers using SlimDrivers, but maybe you'll find something in the DMP logs?
I've uploaded them here: https://skydrive.live.com/redir?resid=DE651BF1564E49D2!107&authkey=!AH3rnFdUDlCY68Y&ithint=file%2c.zip
Thanks for any help!
Vlad.

VladiPHD
These crashes were related to memory management (probably caused by a driver). I would start with driver verifier as it is most likely a driver..
Please run these tests to verify your memory and find which driver is causing the problem.
If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't
know what it is you probably are not overclocking.
1-Memtest. (You can read more about running memtest here)
2-Driver verifier (for complete directions see our wiki here)
Co-Authored by JMH3143
Wanikiya and Dyami--Team Zigzag

Similar Messages

Anyone else having issues with iMac built-in microphone?

My mom's brand new 24" iMac (running the latest version of Leopard) keeps having issues with the built-in microphone going dead. It can be resurrected with a restart and PRAM reset (command-option-P-R), but it is kind of annoying to have to do this every time she wants to Skype or iChat. Any ideas what might be causing this? She runs a fairly clean system with few peripherals or third-party software (except occasionally an external FW drive for backups, a Blu-Ray burner [not connected at the same time], and Toast). Thanks.

Even on restart with nothing else running, she can go into the System Preferences/Sound/Input and try testing the microphone and it is DOA. We did go through all of the prefs in Skype and they are all set right, she does try the Sound Test call in Skype to see if her audio is working and that is usually the indication that something is not right. Her broadband connection varies too much to have iChat work reliably if at all. She will be installing Snow Leopard soon, and I read that iChat only requires 300kbps bandwidth as opposed to 900kbps under Leopard so there is a possibility that there will be an alternative to Skype in the near future.
All her updates are installed. Repairing permissions was done less than a month ago, but it is worth a try again. Also will have her fire up Activity Monitor to see if there is anything else taxing the CPU. I am 2000 miles away so it is sometimes hard to maintain this machine properly from a distance.
Thanks for your input in trying to solve this mystery. BTW what do you think of using an external dedicated microphone? Kind of defeats the purpose/beauty of having it built-in with the iMac...

GUI issues with newly installed IllustratorCC.

We've just purchased and installed Adobe Creative Cloud for our shop. Intallation went smoothly, but usage is not. Anybody experiencing these issues?
OSX 10.6.8
• Outline/Preview does not work dynamically. (without acivating a new tool or zooming in/out)
• Fit Artboard in Window does not work dynamically.
• Separations Preview does not work dynamically.
• Cannot quit application with unsaved document open.
• Cannot close unsaved document.
• Revert closes document.
Thank you for your time.
~dannO
UPDATE:
Possible OS issue? Testing with OSX 10.7.5 seems to work fine. Why does OSX 10.6.8 use Adobe Application Manager and OSX 10.7.5 use Adobe Creative Cloud as gateways to sync and login to CC? Unable to sync settings withing illustrator preferences on OSX 10.6.8.

Problem solved!
Ensure that Tahoma and Verdana are active in your system fonts on OSX 10.6.8!
~dannO

Issue with newly installed harddrive

My original harddrive crashed reacently, the odd thing was that it worked sometimes when I booted, but after a while the system froze again.
I bought a new harddrive which I was able to install macos onto. After a few hours of usage I experienced the same problems with this drive, and now I only get the question mark screen when I boot.
What can the issue be here?
I was at first thinking that the issue was the old harddrive, but now I am thinking that it might be the controller.
Is there a fix for that, or do I need to buy a new computer all together?

The SATA cable may be the cause of the problem.
You can test the hard drive, if you place it in an external enclosure and boot off it while holding the option key at startup.

Problem with newly built computer

I just built a computer (first time ever) and here are my specs:
350 watt PSU that came with Enermax case (28A@+3.3V, 35A@+5V, 16A@+12V)
MSI K8N Neo Platinum
AMD Athlon 64 3000+
2x512 MB Kingston DDR400
ATI Radeon 9700 pro
When I turn it on, everthing works great...... it runs perfectly. Unfortunately, when I tried to install Windows XP pro, after it formatted my HD and tried to auto-reboot, the screen just went blank. The fans kept running, the DVD drive still looked active, everything looked fine except that nothing showed up on the monitor. In fact, because of this, I thought the monitor might be the problem so I swapped monitors but same thing happened.
I soon discovered that everytime I restart, the screen just goes blank. If I turn off the PSU and then back on and start the computer back up, it works fine again - it's only when I reboot.
BTW, my D-bracket stays at CPU initialization when I try to restart.
Over at http://www.techimo.com a guy suggested that the PSU probably was too weak. Is that the problem, or is my mobo screwed up or something else?
Thanks,
-Robert

Quote
Originally posted by vlovich
As far as I remember, you can't install WinXP on one computer and then put the hard drive into another computer if the motherboards are different.
As for the error, does it occur on the new computer or the old computer. If it's on the old computer, could it be that the hard drive is beyond the 137GB limit of old BIOSs?
Also, I've come across this when I overclocked to much. I solved it by resetting the CMOS with the jumper. You can look in the manual but its the jumper to the right of your CMOS batter (which is to the right of the 4th PCI slots).
It kind of looks like this:
Pin Pin Pin 3
Pin Pin Pin 2 --->Jumpered (little cap)
|
Pin Pin Pin 1 ---
To reset, physically unplug your power supply and wait a bit (like 5 seconds). Then move the jumper so that it connects pin 2 and 3. Wait 30 seconds. Then put it back to connect pin 1 and 2 (important or your motherboard may break). Voila, CMOS reset.
I was lucky, I just toke my HD from my old computer, putted it n my new config. And yes it worked after installing the additional drivers.

My mac book air 2014 is having issues with its built in speakers it does not come on after i take my headset out

am having speakers issue after i plug in my headsets into my mac air laptop internal speakers dont work anymore

Open System Preferences > Sound then select the Output tab.
Make sure you have the correct device selected.

Connection Test issue with newly created INTEGRATION_DIRECTORY_HMI in PI7.0

Hi Pals,
Due to change in password for user "PIISUSER" in our system, i changed the login credentials in sm59 -> INTEGRATION_DIRECTORY_HMI.
But the test connection failed, popping up the username/password login dialog again and again.
So i deleted the RFC Connection "INTEGRATION_DIRECTORY_HMI" and recreated it with all the care mentioned in the XI installation guide, manually, step by step.
But again the test connection failed, popping up the username/password login dialog again and again.
I tried this exercise for almost 15 times but without success.
NOTE: I am able to login with "PIISUSER" from SAP system Login successfully.
Looking forward for your kind suggestions.
Thank you!
Saravanan

hi
could be the problem with password..we also faced the same problem while using an alphanumeric one.
after changing to a completely numeric one it started working fine
rgds
Arun

Syncing Issues With Newly Downloaded CDs

For some reason, my IPOD is not syncing the new music I've recently put on my laptop. The sync folder seems to be in order and podcasts sync correctly. Any ideas?

Goodbye, just don't let the door hits you on your way out.

Small issue with Open_Form Built-In Usage

I want to use Open_Form and not Call_Form to open a new form. The problem is that I want to run some more code when the new form is closed. This is fired in a WHEN_BUTTON_PRESSED trigger, but the code following the OPEN_FORM never fires.
Can I put this other code into another trigger, or is there any way to do what I want??
OPEN_FORM('C:\Forms\WHAREHOUSE', NO_ACTIVATE);
message('Test'); --never shown
GO_BLOCK('INV_DETAIL');
DECLARE
CURSOR C1 IS SELECT A.WHSE_LOCATION FROM INV_DETAIL_WHSELOC A
WHERE A.INV_DETAIL_ID = :ITEM_DETAIL_ID;
LV_dname INV_DETAIL_WHSELOC.WHSE_LOCATION%TYPE;
LN_count NUMBER := 1;
list_id ITEM;
counter                number(2) := 1;
BEGIN
     :LOCATION1 := '';
     :LOCATION2 := '';
     :LOCATION3 := '';
          while :inv_detail.oh_qty is not null
          loop
OPEN C1;
LOOP
FETCH C1 INTO LV_Dname;
EXIT WHEN C1%NOTFOUND;
          if counter = 1 then
                                                  :LOCATION1 := LV_Dname;
                                             elsif counter = 2 then
                                                  :LOCATION2 := LV_Dname;
                                             elsif counter = 3 then
                                                  :LOCATION3 := LV_Dname;
                                             end if;
                                             counter := counter + 1;
END LOOP;
CLOSE C1;
                         counter := 1;
     next_record;
          end loop;
END;

hi
place open_form builtin at the end of your code
GO_BLOCK('INV_DETAIL');
DECLARE
CURSOR C1 IS SELECT A.WHSE_LOCATION FROM INV_DETAIL_WHSELOC A
WHERE A.INV_DETAIL_ID = :ITEM_DETAIL_ID;
LV_dname INV_DETAIL_WHSELOC.WHSE_LOCATION%TYPE;
LN_count NUMBER := 1;
list_id ITEM;
counter number(2) := 1;
BEGIN
:LOCATION1 := '';
:LOCATION2 := '';
:LOCATION3 := '';
while :inv_detail.oh_qty is not null
loop
OPEN C1;
LOOP
FETCH C1 INTO LV_Dname;
EXIT WHEN C1%NOTFOUND;
if counter = 1 then
:LOCATION1 := LV_Dname;
elsif counter = 2 then
:LOCATION2 := LV_Dname;
elsif counter = 3 then
:LOCATION3 := LV_Dname;
end if;
counter := counter + 1;
END LOOP;
CLOSE C1;
counter := 1;
next_record;
end loop;
END;
OPEN_FORM('C:\Forms\WHAREHOUSE', NO_ACTIVATE);
hope it will work.
Faisal

Lion - Issues with MacBook Pro Keyboards

I have a 17" early 2008 MacBook Pro. It's Intel Core Duo 2.
Since installing Lion, I seem to be having issues with its built-in keyboard, such as Command + C randomly not working on some apps, most recently Google Docs. But also with Bean and another text edit app I use.
Does anyone know if this issue will be addressed, maybe via a firmware update at some point for the older MacBook Pros?
Thanks,
Alisa

Well, if you are on the road you could try to do this:
1. boot with the Alt key pressed
2. select the recovery drive
3. reinstall Lion
Hope you left a backup at home!
Good luck...

Online Streaming Authentication issues with Chrome

I get caught in a never ending login loop when I try to authenticate with my Verizon ID for online streaming services such as stream.nbcsports.com/liveextra, stream.golfchannel.com, nflonline.nfl.com, etc. Others have reported the same issue with showtime's online streaming service. I have cookies enabled and I continue to get caught in login loops when I'm using Chrome. I do not have the same issue with Internet explorer or Mozilla Firefox. This has been reported before but it doesn't seem to be a high priority. Please fix this issue ASAP.
Solved!
Go to Solution.

Looks like its an issue with the built in "Pepper" Flash player in Chrome. I disabled the built in Chrome flash player and enabled the system flash player and all my authentication issues have gone away on Chrome. WatchESPN, NBC Sports Live Extra, Watch NFL Network all work now.
Verizon...please work with Google on a permanent fix for this!!!
To anyone else having authentication issues on Chrome... use this link to disable the pepper flash player: http://newtriks.com/2012/12/01/how-to-disable-the-chrome-pepper-flash-player/

Issue with Apple Camera VendorID_0x106B ProductID_0x1570 green light blinks continually...camera does not work in photo booth or face time

Green light blinks continually...camera does not work in photo booth or face time.Any suggestions?

Hi Rogerya,
Thanks for using the Apple Support Communities. It sounds like you may be experiencing issues with the built-in FaceTime camera (also known as iSight) on your MacBook Air. The following resource provides relevant troubleshooting information that you can try:
How to Troubleshoot iSight - Apple Support
https://support.apple.com/en-us/HT2090
Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
1. See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
2. See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
3. Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
4. Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
- Matt M.

I bought a few songs on itunes but the songs appear in grey letters and I cannot transfer them to my iphone. I've bought/rented TV shows/movies since so there isn't an issue with my account. How can I get these newly purchased songs onto my iphone?

I bought a few songs on itunes but the songs appear in grey letters and I cannot transfer them to my iphone. I've bought/rented TV shows/movies since so there isn't an issue with my account. How can I get these newly purchased songs onto my iphone?

You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.

Built in iSight issue with Vonage softphone?

I'm not certain if this is similar to the post by Francisco Viana but I've lost my built in iSight too, and as far as I can tell started after having loaded Vonage's softphone which has a known issue with the Intell processor in MacBook.
I'll remove softphone from my MacBook but is there any way to tell if this is the culprit otherwise?
John

I'm not certain if this is similar to the post by
Francisco Viana but I've lost my built in iSight too,
and as far as I can tell started after having loaded
Vonage's softphone which has a known issue with the
Intell processor in MacBook.
I'll remove softphone from my MacBook but is there
any way to tell if this is the culprit otherwise?
John
Removed softphone, then tried to see if I could find the driver in extensions, couldn't so then ran a test and got this:
090154.054092 Loading hardware rules from hardwarerulesH264-G4.plist
090154.054195 Checking H264 hardware rules
090154.054244 Satisfied rule #1 (20:640x480)
090154.054515 setLocalUserName: John [email protected]
090154.091405 Default video size is (640x480)
090154.102408 ### NEW STATE: to: VC_INIT, from: VC_INVALID
090154.103163 ### NEW STATE: to: VC_IDLE, from: VC_INIT
090154.103258 ++++++++ confStatusMapRemoveAll
090154.103311 ( ) -- mapUserIDToSecurityInfo cleared --
090154.103553 UPnP init passed
090154.103779 NATTraversal created
090154.103916 QT automatic setting = 16777216
090154.103932 Bandwidth based on QT prefs = 0
090154.108016 BWD: GotBandwidth: 481403/1335882 (up/down) @[192.168.0.2:255.255.255.0]
090154.108088 BWD bandwidth: 481 kbits up, 1335 kbits down.
090154.108130 videoNetworkCapable: 1 -- 3 max participants.
090154.108164 audioNetworkCapable: 1 -- 9 max participants.
090154.108230 vcCapabilities returns: 0x0000003f
090154.108273 VCCapAudio
090154.108308 VCCapVideo
090154.108349 VCCapMultiAudio
090154.108378 VCCapMultiVideo
090154.108407 VCCapMultiAudioHost
090154.108446 VCCapMultiVideoHost
090154.164494 Found 0 cameras:
090154.164828 Found 0 cameras:
090154.164879 selectCamera: returned 0
090154.178749 Microphone devices:
090154.179078 Internal microphone
090154.179182 Line In
090154.179266 Selected mic: Built-in Microphone / imic
090154.179404 Found 0 cameras:
090154.179506 Found 0 cameras:
090154.179543 selectCamera: returned 0
090154.181861 Microphone devices:
090154.181962 Internal microphone
090154.182056 Line In
090154.182116 Selected mic: Built-in Microphone / imic
090154.185927 Found 0 cameras:
090154.186151 Found 0 cameras:
090154.186193 selectCamera: returned 0
090154.189079 Microphone devices:
090154.189190 Internal microphone
090154.189347 Line In
090154.189418 Selected mic: Built-in Microphone / imic
090154.352672 UPnP Router Info:
- manufacturer []
- friendly name [Residential Gateway]
- model name [Residential Gateway]
- model desc [Residential Gateway]
090154.353258 UPnP: Begin TCPProc
090154.507120 UPnP: TCPProc begin loop
090155.568456 Found 0 cameras:
090155.568727 Found 0 cameras:
090155.568827 selectCamera: returned 0
090155.571801 Microphone devices:
090155.571954 Internal microphone
090155.572178 Line In
090155.572252 Selected mic: Built-in Microphone / imic

Today I get issues with thte device. When I in a phone call, the screen don't auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently.

today I get issues with my z10 device. When I in a phone call, the screen don’t auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently. can anyone help me with this?

Same issue already several weeks.
And we are not alone:
http://forums.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/i...
At all there is, I think, 4 threads in parallel about this issue at CB forums. One of the:
ms.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/index5.html
I already contacted BB Help at Twitter. Answer:
Thanks for the information. It seems that you have installed an OS version higher than the one supported by your carrier on your device. Please contact your carrier to get the supported OS version and try the proximity and light sensors. Let us know if you need further assistance. Cheers. ^LFC.
I did replay:
You are confused me. Phone got updates over network automatically. On crackberry forum a lot of people from different countries and with Different OS version, but with the same problem. Hi, this is thread at CrackBerry: http://forums.crackberry.com/blackberry-z10-f254/proximity-sensor-906493/index3.html
This my replay was 22 of march. No more answer from BB.
I can't contact my operator - 3UK, because I bought my from on Amazon from Amazon. This phone not from operator - seller is Amazon.
What I already done:
For last week, I read, how to install OS using Sachesi and Autoloader. I used Sachesi to load 3 UK version, I installed autoloader from this links:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
This
For Z10 models STL100-1, 2, -3, -4: Download 10.2.1.1925
Doesn't help
And this:
For Z10 models STL100-2, -3, -4: Download the 10.2.0.1803 OS
No result.
After install all of them phone wants to update to 10.2.1.2102 by air.
BBVE in all versions sais: Can not obtain data from sensors.
Dear BB support, please, can you explain, how to resolve this issue?

MEMORY_MANAGEMENT Issues with newly built PC.

Similar Messages

Maybe you are looking for