Memory module upgrade on Satellite Pro L450D -12X

I want to up grade my Pro L450D -12x with a new memory.
Could some one more knowledgable than myself confirm, or not that
this is the correct module.
Thanks
ordep
2GB,200-pin SODIMM, DDR2 PC2-6400

Thanks Macius.
So would this on do th job, I dont want to spend to much on an old lappy.
http://www.amazon.co.uk/Hypertec-PA3669U-1M2G-HY-PC2-6400-Toshiba-Equivalent/dp/B00564QQI0

Similar Messages

Memory Upgrade on Satellite Pro A10

Can anyone advise me as to the correct RAM type to upgrade my Satellite Pro A10. Its a standard 256mB at the minute and I'm thinking of slotting in an additional 512mB next to it - but am bemused by the array of memory types and nomenclatures - DDR - SODIMM etc !!!
Handy with the screw drivers but not so hot with the acronyms. Many thanks to you all out there who know the score!

Hi
I understand you very well and sometimes Im also a little bit confused because of the whole notations in the computer world.
The Sat Pro A10 supports 200-Pin PC2700 (333Mhz) DDR SODIMM modules and you can upgrade the memory on this notebook up to 1024MB (2 x 512MB)
You could check this memory module page:
http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=21046&ft=m&st=3

How to install memory modules on a macbook pro 15"

I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?

how to install memory modules on a macbook pro 15"
Read the manual / user guide that came with your comptuer or download it from http://support.apple.com/manuals/
I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?
Post your question on the Paralells forums: http://forums.parallels.com

Satellite Pro L450D - Slight ripple effect on external monitor

I am hoping someone can help me. Have just bought a new Satellite Pro L450D and also bought a separate lcd screen (Viewsonic) to use with the laptop.
When using the lcd screen there is a slight ripple effect across the background when you look at the screen which is not nice on the eyes. Its not the screen that has a problem as I have tried it on other pcs/laptops and its fine. Have also tried another screen on the laptop and the same problem occurs. However, this problem does not occur of the laptop screen itself.
Does anyone have any idea how I can solve this problem.
Thank you
Sam

Hi
It seems that the native resolution of this screen is 1920 x 1080.
I use the same resolution on my external wide screen monitor.
But I have connected the external screen to my notebook using the DVI cable.
I tried a HDMI cable but the picture on the external screen was not clear usign1920 x 1080. I have no idea why.
Anyway I have tried the external monitors DVI port and the picture was perfect!
Seems your monitor supports only RGB analog port.
In order to view real HD videos, picture you would need an HDMI or DVI port.
Of course its possible to use an RGB analog port as well, but there are differences in picture quality.

Re: Satellite Pro L450D - Downgrade from Windows 7 to Windows XP

I have a Satellite Pro L450D which has Windows 7 on it. I want to change to Windows XP
When I try to install XP to Laptop I get this blue screen and will not let me go to the install process. Would I have to take out Hard Drive and format it on another computer or is there another solution?
I have no Windows XP recovery disk for Laptop. There is a windows 7 recovery on hidden directory.

Hi djxxx,
What blue screen you get exactly?
Generally speaking its not necessary to format the HDD first because this can be done from XP installation disk.
I assume it has something to do with the SATA option in BIOS You should change it from AHCI to Compatible.

Memory upgrade on Satellite Pro A200

Have two Satellite Pro A200 #PSAE1E-00T002EN laptops and wanted to know if I can upgrade the 2 x 1GB memory to 2 x 2GB?

As I understand you request, you want to upgrade the notebooks memory to 4GB.
Well, I think its not possible.
The Satellite Pro A200 supports max 2GB RAM (2 x 1GB) so you will be not able to use 2 x 2GB modules.
Best regards dude

Memory upgrade on Satellite Pro L40-15d

Hi
I have Satellite Pro L40-15d with 512 memory (Samsung) but I wont upgrade to 1GB. I have Kingston ktt667d2/1g I have tray to put in to both slots but nothing work I cant switch on computer.
But when I change for old one laptop is ok. What can I do? Install special program or update BIOS or maybe the memory stick is broken.
Regards

Hi
The notebook doesnt boot after the memory upgrade due to these different issues;
- memory modules are not compatible together
- memory modules are not compatible with the notebook
- memory modules are faulty
- one of memory slots is faulty
In most case the memory module replacement helps.
One hint; did you try to switch the memory modules in the slots? Sometimes this helps.
Several weeks ago I have updated my memory and the notebook didnt boot.
I thought its a memory malfunction but after module switching the notebook booted correctly.
Good luck

Memory upgrade on Satellite Pro A40

Can anyone please advise where is the best place I can get a memory upgrade for my Satellite Pro A40 laptop.
I think my machine is a PC2700 DDR. I am looking for either 512mb or 1gb.
Thanks in advance.
Christine

Hi
On the Satellite Pro A40 you will find 2 memory slots and you can upgrade the memory to max 2GB (2x1024MB)
It should be possible to use these modules:
PC2100 512MB (PA3164U-1M51)
PC2100 1GB (PA3278U-1M1G)
And
PC2700 512MB (PA3312U-1M51)
PC2700 1024MB (PA3313U-1M1G
I purchase the compatible parts and devices always form the Toshiba service partner in my country because so I'm 100% sure that this parts are compatible.
So I would recommend you also to buy the modules form the ASP in your country.

Memory Upgrade on Satellite Pro A60

I have upgraded an A60 Pro with a 1GB memory up but the Control Panel /System/ General tab still shows it as having 192MB RAM. This limits me downloading some Security Software from BT Yahoo.
Can anyone advise on how I can make the machine recognise the new RAM or is the 192 MB RAM noted different memory from the new memory upgrade?

If you use non-compatible RAM module it is logic that system can not recognize it correctly. I do not know who is the manufacturer of this 1 GB RAM module but if you want to use compatible one pick up some info about PC2700 1024MB (PA3313U-1M1G) or check Kingston web page.

Memory Upgrade for Satellite Pro L10

Can i add 512MB to the 256MB memory already on my laptop? And also what is the name of the memory supported by Satellite Pro L10.
Thanx
Femi

Hi Femi,
Your L10 has two memory slots available and will support a maximum of 2Gb RAM (2 X 1Gb modules).
Check out the following URL for details of compatible modules for your notebook :-
http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=11979&ft=m&st=3
HTH

Memory Upgrade at Satellite Pro A120-185 PSAC1E

The original installed memory of 1GB in my trusty old A120 is now becoming a bit of a limiting factor and I want to upgrade it to the full 4GB. I've checked on this site and it says that the memory runs at 533 MHz.
However looking at various other websites it suggests that certain varieties of this laptop can run memory running at 667 MHz - depending on its region!
Does anybody know which the correct speed is?
Obviously I'd like to put faster RAM in it when I upgrade it, but if it can't run it, I don't particularly want to waste money on memory I can't use.
Thanks in advance.
Tony

Hi
> However looking at various other websites it suggests that certain varieties of this laptop can run memory running at 667 MHz - depending on its region!
Everything depends on the FSB (front side bus)
If the FSB would allow the 667Mhz then the memory modules would run also on 667Mhz. If the FSB supports only 533Mhz then your modules will run max at 533Mhz even if the modules would support 667Mhz.
Simply said; the FSB can slow down the memory speed.
Greets

Where can I find Vista drivers for Satellite Pro L450D?

Hi, can anyone offer any help please?
My toshiba Satellite Pro (Model L450D) came with Win 7 preinstalled. Unfortunately due to virus, I had to format the HDD and reinstall an operating system, but only had a legal copy of Vista. Now Toshiba utilities keeps coming up with a message saying it is blocked at start-up because it is not compatible with this version of Windows (vista).
All the options to download anything for this laptop model is in Win 7, of course. Where can I find everything I need to be compatible with Vista please?
Thanks in advance.

And you think best solution for you is to use Vista or what?
The whole problem is that you didnt follow Toshiba advice and create recovery disc. Can you confirm this?
Using this disc you can have factory settings and Win7 again.
In my opinion Vista is not solution. At first Vista is not supported so if you cannot find Vista stuff on Toshiba download page you will not be able to find it anywhere. Best option for you is to order original Toshiba recovery disc for your machine. You will get Win7 recovery image and you can use it anytime you want.
For order check please https://backupmedia.toshiba.eu/landing.aspx
If you have more questions you are welcome.

Upgrading Toshiba Satellite Pro A10 hard drive

Hi
I have a Toshiba Satellite Pro A10. It is an old laptop, but rather than change it, I would like to install a new hard drive. I have previously put in new RAM to this laptop, but I know the Hard drive change is more complex, so I need as much help as I can get
The laptop is running well, but the 20GB HDD is obviously too small. I have an external USB hard drive for multimedia stuff etc, but the main HDD, even with just the Windows XP and other software on it is always near to the 20GB and the time has come to change
I know I can handle the 'hardware' changeover without much problem. I am intending to get a USB enclosure to allow a clone of the old drive to be copied to the new one, so that when I do install it, the only difference to the laptop will be the larger storage capacity on the internal HDD
I have read extensively about the variety of issues and I am still quite confused. The main issues for me seem to be
-Whether the BIOS affects the type of internal HDD I can install
-I am fairly sure the interface I need is ATA-100/IDE. So does this mean I cannot use SATA?
-What size of HDD can I install? Is there a limit?
-Does the current internal HDD have partitions? I am not sure? It is the same as it was when I bought it, so would Toshiba have put a partition on it containing OS or software? I don't know. I have 'recovery discs' but no Specific windows disc, as one did not come with the laptop. So considering this, how do I go about 'cloning' the old drive onto the new, and then installing it 'seamlessly'?
-Do I need specific software for a 'clone'? Otherwise, how do I do it?
-What do I need to look for in a HDD, when buying? Some sellers seem to see potential issues to do with the capacity, others do not. Im confused
So, as I say, all I want, is to get a larger internal HDD and install it without problems. Im willing to do the work involved, but only when Im confident I have all the necessary information and 'boxes ticked'. Otherwise I fear it may be a disaster.
I am not able to afford to buy a new laptop, so all help is very much appreciated
All advice welcome. Also, if you have any questions just ask
Thanks in advance
Jason

Can you provide the COMPLETE model number and the part number for that model? I don't want to give you any incorrect information. The part number would look like this. PSA10U-3V1JG8
But based on what you have stated so far I would say you need an EIDE or ATA hard drive. Due to bios limitations that I am 95% certain will be in place with your model you will be limited to a 120GB or smaller 9.5mm thick 2.5" ATA/EIDE hard drive. I recommend Western Digital Scorpio BLue drives for their combination of price, performance, and reliability.
Once you post the model and part number I can verify this so you can order the correct drive for you system.
Western Digital has a free version of Acronis True Image that you can download that you can use to clone your old drive to your new drive if you purchase a WD drive.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Need repair manual for CD-rom upgrade on Satellite Pro L20

Hi
Is there anywhere I can download a repair manual for the Satellite Pro L20 as I've just purchased a dvdrw drive & want to fit it myself
TIA

Hi
Unfortunately, you will not find any repair manuals on the Toshiba website. Only the Toshiba service partners have such documents and have possibility to use notebook manuals.
As far as I know the drive is secured with a screw which is placed at the bottom of the unit and under the keyboard.
After removing of these two screws you can disconnect an optical drive from the connector on the system board.
But without any experience you should remove any drives. I think you should ask the Toshiba service to help you because he has more experience in such cases

Memory upgrade for Satellite Pro A60

I would like to put in a 1gb memory chip in my current A60 as it only has 256mb built in.
When viewing the parts on the Toshiba site, it is not showing the part available. Are these no longer available?
Thanks,
Manic

Hello
Compatible PC2700 1024MB RAM has part number PA3313U-1M1G. you can add it to existing 256 MB.

Memory module upgrade on Satellite Pro L450D -12X

Similar Messages

Maybe you are looking for