Memory modules not working on HP Touchsmart 600-1050sc desktop - update BIOS ?

Hi
I just bought 2 x 4GB DDR3 PC3 12800 memory modules from Cruical (see http://eu.crucial.com/eur/en/touchsmart-600-1050sc/CT5311446)
The modules does not work on my HP Touchsmart 600-1050 sc desktop. Acc to HP specs it should support 2 x 4GB (max 8 GB in total).
But the computer does not start (I have installed the modules correct). The manufacturer advises me to update my BIOS.
I wanna ask you guys, before I try suhc a thing, is there any chance this could help?
Thanks

Hi,
Its specs:
Memory upgrade information
Dual channel memory architecture
Two DDR3 SO-DIMMs (200-pin) sockets
SO-DIMM type-PC3-10600 (DDR3-1333)
Non-ECC memory only, unbuffered
Supports 2 GB DDR3 SO-DIMMs
Maximum memory only if using 2GB DDR3 DIMM modules.
Supports up to 8 GB on 64-bit PCs
Supports up to 4 GB* on 32-bit PCs
Please try PC-10600 RAM
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Function Module not working for old Role

Dears
Function Module not working for old Role
Function Module: /VIRSA/BAPI_AE_USERS_FOR_ROLES
Before EHP4 upgrade this functional module working fine, but after updated users are not visible.
We have chekced if the users are assigned directly users are visible but indirect (Position Based) assignment users are not apprearing.
Pl check the fucntion module with given roles below and identify the root cause,
EP_TRVL_ALL_CAB - Old Role
EP_TRN_TRVL_DRGC_V2 - New Role
Regards
Krishna Mohan CH
9704500717

Krishna,
I do not think this BAPI is meant to be called by anyone but the application using it, and its functionality may therefore change without notice.
What are you trying to achieve? Maybe there's a better way to do that...
Frank.

Max Memory Settings Not Working (SQL Server 2008 R2)

I have 12 GB ram in sql server 2008 R2 of 64 bit server (Windows 2008 R2).
I have set the Max memory setting to 12288 MB Memory setting.
Still the usage of sql server process is around 14 GB.
Is Max memory setting not working?
I have also enabled AWE after all it is 64 bit.
Thanks

Problem is that: my OS is halting due to this RAM. I have 16 GB of ram and assigning 12 GB to SQL SERVER and rest is using for OS. Please guide me how to get information about actual memory usage from all sql server processes. like
all CLR etc
Hi,
Are you also running SSIS/SSAS/SSRS with database engine services. What do you mean by OS is halting ?
If you want to check whether SQL Server is facing memory crunch please have a look at perfmon counters from
this link
Sys.dm_OS_memory_clerks would be DMV helpful in tracking memory utilized by various processes
I have also enabled AWE after all it is 64 bit. Thanks
Please note AWE doe snot have any notable affect in 64 bit system.
Below will tell you memory used by SQLCLR
select single_pages_kb + multi_pages_kb + virtual_memory_committed_kb from sys.dm_os_memory_clerks where type = 'MEMORYCLERK_SQLCLR'
Below query will give you memory consumed by various clerk
SELECT type, SUM(multi_pages_kb)
FROM sys.dm_os_memory_clerks
WHERE multi_pages_kb <> 0
GROUP BY type
ORDER BY SUM(multi_pages_kb) DESC
Can you reduce max server memory to 11 G and see if it gives some relief
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

HELP! - Lumia 800 memory card not working :/

My phone decided to go into the notorious restart loop - So following everyones advice on teh internet I performed a hard reset.
It loads the orange sign - then the Nokia sign - then the windows mobile sign as if the phone is about to start with the noises etc... then it decides to goto a screen says
"MEMORY CARD NOT WORKING
Your memory card has changed, is damaged or is non-compatible.
To fix this, turn your phone off and either remove the memory card or replace it with a new compatible card. Then reset your phone to the original factory settings.
To learn how to reset your phone, refer to the owner's manual"
I also get the option to make an "emergency" call or "turn off" the phone. the volume buttons also work the volume fine aswell as the option to change the phones mode from silent to vibrate or vibrate and ring.
Tried hard reset numerous times, tried charing the phone for hours on end and trying it, tried soft resets. Basically the only options i've found.
Just to add.... Why would a phone with no memory card slot even have a message stating that the memory card is faulty and that i could even remove or replace it???
I hope someone manages to help me without having to cough up £50 excess to my insurance.
Anyone come across this before?

Sorry, it's my standard response, but your phone doesn't work. Take it back to whoever sold it to you. It's a consumer good, consumer protection rules apply.
Your problem certainly has novelty value but if you've done the hard reset and it didn't work you're at the end of the fix it yourself stage.

Hp touchsmart 600-1000 desktop

i just upgraded or add to my HP touchsmart 600-1000 desktop pc memory module to 1 DDR3 PC3 10600 8GB, by factory default what was installed was only 2 x 2gb ddr3, total of 4gb installed in my desktop as memory. The problem now, it wont start normally, it keeps on rebooting.... is my desktop pc memory ram not upgradable? if no, how much is the maximum memory module and what specification other than pc3 10600mhz i can install? is the dd3 pc3 12800 not compatible?

Hello @Harvey26,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are looking to upgrade the RAM on your desktop computer, and that it is not able to boot properly with the new RAM installed. I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. I
How Do I Find My Model Number or Product Number?
I will also need to know if there are any error messages being displayed, or if there is a beeping sound. If there is a beeping sound, how many are heard in a row?
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Heating problem with HP TouchSmart 600-1050sc

Hi There..
Got this recurring problem on my HP TouchSmart 600-1050sc. (No changes made to org. config)
Every time i open more then 2 browser windows, or set up more than one game client, the cooling fan goes into a frenzy. ;o(
On my old stationary computer, I would rip the computer apart, and clean all cooling modules with cuetips and a small wacuumcleaner to bring down overheating, but on this mashine it's not the obvious task. (Well seems like it would be a humongous job)
Anyone have experienced same problems, and have a clever solution ?
Kind regards, Agger

Hi Ashik_ch,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are concerned over the heat coming off your Envy. 60 degrees isn't overly hot for a CPU but here is an HP support document on Reducing Heat Inside the PC to Prevent Overheating. It will show you how to clean out the inside of your notebook.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Dashcode is not working in Mountain Lion. I tried updating to Xcode 4.4 and it still did not work . . .

Dashcode is not working in Mountain Lion. I tried updating to Xcode 4.4 and it still did not work . . .
I use dashcode for most of my coding needs, so it is very important to me!

I have the same problem too. dashcode shows up in the finder but its just a question mark (see screenshot). Anyone found a way to address this?
Thanks!

I want to know, why the update process of firefox is not work correctly. Because of i begin update that is not work for along time(Connecting to the update server). So why should i do this problem. Please help me.

Update process is not work

See:
* [[Software Update Failed]]
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder.<br />
You may need to delete active-update.xml and updates.xml as well if present.
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
(%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)

I upgraded to Mountain Lion yesterday, but since doing so I find that my 1Password app will not work. I have checked for 1Password updates but there are none. Is there a compatibility issue

I upgraded to Mountain Lion yesterday, but since doing so I find that my 1Password app will not work. I have checked for 1Password updates but there are none. Is there a compatibility issue

Hmmm...I'm using 1Password Version 3.8.20 (build 31499) with a fresh install (scrape and pave) of Mt. Lion on my iMac and it's working fine.
I use Dropbox to sync 1Password so for my fresh install I simply downloaded 1Password from Agilbits website and installed it.
Have you tried reinstalling 1Password? Depending on how you purchased it, download it from their website or from the Mac App store to reinstall/replace it. (IIRC v3.8.x comes directly from Agilbits and v3.9 from the Mac App store.) You shouldn't have to uninstall it, the new download should overwrite the existing copy.
As with anything else, be sure to run a backup first!
More here:
http://support.agilebits.com/discussions/1password-38-for-mac-from-agilebits-web site/17861-finding-existing-data-file-when-reinstalling-1password
http://support.agilebits.com/discussions/1password-in-mac-app-store/3377-how-to- reinstall
http://support.agilebits.com/discussions/1password-38-for-mac-from-agilebits-web site/13769-reinstall
http://support.agilebits.com/discussions/1password-in-mac-app-store/2394-reinsta lling-1-password
Hope that helps.
D'oh! Mende1 beat me to it!

My 3G I Phone Not Working With My SIM Card After I Updated my phone

my 3g iphone now ner not working with my sim card aftet i updated my iphone

Was your phone originally locked to a different carrier?

Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

GO to Setting > Cellar Data > VPN Settings > Add any user and password under Personal Hotspot, then you will see it's activated again as usual

FaceTime is not working on my iPad. I've updated my iPad to the latest version of I0S and tried all the things that come up when I do a Google search. Any ideas? Thanks

FaceTime is not working on my iPad. I've updated my iPad to the latest version of I0S and tried all the things that come up when I do a Google search. Any ideas? Thanks

Have you tried the troubleshooting advice here:
If you can't make or receive FaceTime calls - Apple Support
If you get an error when trying to activate iMessage or FaceTime - Apple Support
What exactly is not working?

Hi my iPad 2 is not working right is sayed I need to update it so I did and now I turn It on and it shows the USB and iTunes and I plugged it in and still nothing

Hi my iPad 2 is not working right is sayed I need to update it so I did and now I turn It on and it shows the USB and iTunes and I plugged it in and still nothing

Next try the remaining items of
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Memory upgrade not working

I ordered 8GB memory for my imac mid-2011 model.
I then tried to install and all I'm getting is three beeps telling me there's something wrong with my memory.
I've tried all configurations but can't get the 2x4gb modules to work.
I've had to stay with only the original 2x2gb ones it came with.
Can anyone please help.
The only difference, besides the size, between the two modules is that on the 4gb ones is says PC3-10600S-9-10-F2 and the 2gb ones say all the same except instead of F2 at the end it's F1.
Cheers.

Which would seem to suggest that you may (unusually) have a doubtful memory module. Less unusually, you would have paid over the top for it.
Many people on these forums speak well of the following suppliers.
In North America contact OWC … Upgrade Apple iMac Memory
In Europe contact Crucial.com … RAM Memory Upgrade
Both companies have facilities to guide you and will recommend the correct memory package to meet whatever needs you describe to them.
There may be benefits buying from your own geographical location insofar as Shipping charges, Local sales taxes and Exchange rates. Check out the basic memory costs and do your sums next time you buy.

Memory module not recognized on K7T266 Pro2

Hello.
I have a computer with only 256 Mb of RAM and I wanted to add 256 Mb but my second memory module of 256 Mo is not recognized whereas it functions very wel.
Here are details :
- Mother board : MSI K7T266 Pro2 (ms-6380 v2.0) with 3 memory slots
- BIOS : Award Modular W6380F1 V3.0 071902
- Memory module of origin : Samsung 256 Mo PC2100 (2 Sides)
- New memory module : Corsair Value 256 Mo PC3200 (1 Side)
Configs Tested :
- Samsung only : OK
- Corsair only : OK
- Samsung in Slot 1 and Corsair in Slot 2 or 3 : the computer starts but with only 256 Mb of RAM (in this config, Everest Ultimate Edition finds both memory modules but also only 256 Mb of RAM)
- Corsair in Slot 1 and Samsung in Slot 2 or 3 : the computer starts with a blank screen and several beeps.
Can somebody help me so that my second memory module is recognized correctly ? I specify that I did not modify the BIOS.
I thank you by advance.

I'm no memory expert, but from being around here I've learned that there is more to a stick of RAM than the MHz speed. If timings etc were perfectly the same for the 3200 and the 2100, the system (the Northbridge) could simply set down memory speed to the slowest of the sticks.
However, I also know that many have been helped by entering BIOS, Advanced Chipset..., and go to the subtitle Memory timings controlled by..., and change from By SPD to By User. Then manually set down to 133 (266 effectively). This is if you absolutely want these two sticks.

Memory modules not working on HP Touchsmart 600-1050sc desktop - update BIOS ?

Similar Messages

Maybe you are looking for