Memory problem with apps on Lenovo IdeaTab A3000-F

I currently have a standard model with a 64Gb SD card installed. At the moment the internal stoarage still has roughly 12Gb of space whilst the SD card still has nearly 40Gb of space. However the last few times I have been asked to update current apps or add new ones I am told there is an error due to a lack of sapce. To give context the biggest file I have pending is 46MB in size.
Is this a problem with the Tablet or a problem with Google Play?

Thanks a lot for your help,
I left the tab until the battery drained, then it accept to charge, & worked normally.

Similar Messages

How to reinstall stock firmware for Lenovo ideatab A3000-H

Is anyone help me Please? I lost firmware of my lenovo ideatab A3000-H new model. I want to reinstall. Please help me.

Hi Hasheb,
Welcome to Lenovo Community Forums!
I’m sorry to hear that the inbuilt memory of the Tablet is displayed low, below is the link where it explains the reason for the same and I suggest you to update software in the tablet by connecting it to a Wireless network and then go to Settings > About phone > System update > Online update.
Why is my device internal storage less than advertised?
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Problems with APP World

Just got back into the Curve from a WM phone and I forgot how easy this phone is to use!!! Having a problem with App world though. I;m receiving an error message stating I'm unable to connect to the server. Anyone have any suggestions on how to rectify the problem? I'm sure it's a super easy fix and I'm just missing it online somewhere. Thanks!

Here's a few steps I've recommended that have worked for some...
There have been some issues with the AppWorld services lately...most are reported to be cleared up. Please try again. Also, please try removing and re-installing AppWorld...some have reported that to be helpful. In addition...RIM has released AppWorld version 1.1.0.15...it is highly recommended to be on that version.
Also please try a hard reset: With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
In addition, you can try this sequence:
1) Remove AppWorld from your BB (Homescreen > Options > Advanced Options > Applications) -- if it requests that you reboot the BB, do so.
2) Do a Batt-Pull reboot as described above.
3) Get a new link and install a fresh copy of AppWorld
http://na.blackberry.com/eng/services/appworld/download.jsp#tab_tab_download
Again, if it requests to reboot, do so.
4) Do another Batt-Pull reboot
5) See if it now works.
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Memory problems with PreparedStatements

Driver: 9.0.1 JDBC Thin
I am having memory problems using "PreparedStatement" via jdbc.
After profiling our application, we found that a large number oracle.jdbc.ttc7.TTCItem objects were being created, but not released, even though we were "closing" the ResultSets of a prepared statements.
Tracing through the application, it appears that most of these TTCItem objects are created when the statement is executed (not when prepared), therefore I would have assumed that they would be released when the ResultSet is close, but this does not seem to be the case.
We tend to have a large number of PreparedStatement objects in use (over 100, most with closed ResultSets) and find that our application is using huge amounts of memory when compared to using the same code, but closing the PreparedStatement at the same time as closing the ResultSet.
Has anyone else found similar problems? If so, does anyone have a work-around or know if this is something that Oracle is looking at fixing?
Thanks
Bruce Crosgrove

From your mail, it is not very clear:
a) whether your session is an HTTPSession or an application defined
session.
b) What is meant by saying: JSP/Servlet is growing.
However, some pointers:
a) Are there any timeouts associated with session.
b) Try to profile your code to see what is causing the memory leak.
c) Are there references to stale data in your application code.
Marilla Bax wrote:
hi,
we have some memory - problems with the WebLogic Application Server
4.5.1 on Sun Solaris
In our Customer Projects we are working with EJB's. for each customer
transaction we create a session to the weblogic application server.
now there are some urgent problems with the java process on the server.
for each session there were allocated 200 - 500 kb memory, within a day
the JSP process on our server is growing for each session and don't
reallocate the reserved memory for the old session. as a work around we
now restart the server every night.
How can we solve this problem ?? Is it a problem with the operating
system or the application server or the EJB's ?? Do you have problems
like this before ?
greetings from germany,

Memory problem with jdk/jre 1.1.8

My name is BERGMANN Yannick.
I'm working for IRM in Li?ge and we developped an application (user interface for an industrial measurement system) in Java (JDK/JRE version : 1.1.8).
We have a big memory problem with this application :
- This user interface is running on a WINDOWS NT PC with 128MB.
- This is the command to lanch our application :
C:\Program Files\JavaSoft\JRE\1.1\bin\jrew.exe" -ms32m -mx32m -cp "\Program Files\HMI\HMI.zip;\Velocis\Add_On\Jdbc\raima.jar;\Program Files\Swing-1.1.1\swingall.jar" be.irm.hmi.kernel.HMI -t15 -d"Velocis rdstcp" -newdb -mf1m -mr20
- When our application is running, everything seems to be OK in memory for it. The garbage collector seems to work properly and our application has always at least 5MB free memory (We use the java instruction "Runtime.getRuntime().freeMemory()" to know this).
- But when we look in the "Windows NT task manager" for the "jrew" application, the memory increases ALWAYS.
- After 5 days our application is completely frozen and blocked ...???
- here is a memory map of our Windows NT PC :
     "jre.exe"     "commit total"     "commit limit"     "commit peak"     "physical total"     "physical available"     "physical file cache"
Monday     92264     109256     194944     109424     130484     19492     6216
Thuesday     106196     123072     194944     123348     130484     6072     5840
Wednesday     110836     132288     194944     132416     130484     4408     5140
Thursday     108200     144980     194944     145140     130484     4888     5148
Friday     109440     158319     194944     161334     130484     4911     4992
Monday     111600     209060     228548     209148     130484     5184     3484
Have you any idea of what is happening with "jrew" in memory ?
We have had this problem for six month and we are totaly out of idea.
If you can give us any idea, we'll appreciate a lot.
Thanks in advance,
BERGMANN Yannick
IRM SA - Software Engineer
Tel. (32)4/239.90.10
Tel. (32)4/239.90.74 (direct)
Fax (32)4/263.40.97
E-mail [email protected]

We had a memory problem with a swing applet in our company. The major reason for this was that we added new components in a JTree and removed them later again, and the components we removed were never garbage collected. This was because with these components we added different listeners, and we didn't remove the listeners after we didn't need the components anymore. After we corrected this, the components where garbage collected.
Perhaps it's a similar problem you have, or I have no idea. Check that you remove actionlisteners, mouselisteners etc from components you want to be garbage collected.
You could also test your application with OptimizeIt to see what objects you create and how many you get of them over time: http://www.vmgear.com

Memory problem with 5330 XpressMusic

Hi,
I seem to have a memory problem with my 5330, I have a 1Gb micro disc installed. My son sent me a photo from his phone, when it arrived I got a warning on the scren that 'there is not enough memory to receive messages', I have tried to delete as much as I can, a lot tells me I can't delete it, but I still get the same warning. This warnig shows up each time I switch on the phone. How can I get myself more space? Can I move things from the phone memory to the memory card?
Gerald
Message Edited by warmbells on 01-Nov-2009 06:19 PM

Are you sure you're using a 5330 XpressMusic? Or is it a 5320 XpressMusic? The former is yet to be released, AFAIK.
Assuming that you are using a 5320, try these steps:
-> Move all photos, music, videos stored in the phone memory to the memory card. You can use the built-in File Manager to accomplish this.
-> Delete all files that you would've received via bluetooth, present in your Inbox. You can save them to the mass storage.
-> Clear the browser cache.
-> Clear the Sent Items folder.
-> Make sure you don't have too many messages in your inbox.
Hope this helps
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

Memory problem with ITS

Hello friends,
we are having memory problem with integrated ITS.. on one application server all memory of ITS is getting exhausted. We think few users take lots of memory and it never gets released.
I checked Note 742048 - Integrated ITS, memory requirement in application server but parameters looks ok. Sometime, when i kill a user session in SM04, some part of memory was released. However i am not able to find which sessions are taking max memory as i do not see any workproess active in SM50.
in SITSPMON :
Memory Consumption: Overview
Sessions:     27      24,710,431 Bytes       915,201 Bytes/Session       2,433,8
Templates:            14,793,306 Bytes
    Sess. & Templ.    39,503,737 Bytes     Currently available to ITS: 81.92MB o
ITS Session     memory type     Peak          Memory     Total     Current
USER 001 2463     Session Memory     1,955,757     938,597     7,574     723
USER 001 2503     Session Memory     2,008,621     965,245     9,181     930
USER 001 2523     Session Memory     2,412,477     856,925     11,327     82
thanks
ashish

and what is 2463 is line : USER(user ID) 001(Client) 2463(??) Session Memory 1,955,757 938,597 7,574 723 as this is not a work process ID.]
Basically i am trying to correlate ITS session with SM04 Session of user.

Memory problem with my Nokia 3220

Hi,I am new here and I have a memory problem with my Nokia 3220.I deleted all of my stuff in galery exept the BlueSquare theme and Nokia Tune but it says that i only have 483kb free memory and galery has 1,7mb memory taken. What should i do ?...I hope you understood my problem and i hope you can help me!
Shibuy
Thank You!!

I have the same problem recently. I bought my nokia 3220, 3 years ago and all was ok but now I download some free themes from a web site and suddenly I realized that my cellphone has less memory. In the phone options says that I have 2,2 MB in my Gallery when actually I have only 800 KB in my Gallery. I don't know what happen!! Maybe it's a virus or what is the solution?? Can I restart the cellphone ?

Memory Problem With 4gb Crucial Ballistix and Asus M4A785TD-V EVO

motherBoard: ASUS M4A785TD-V EVO
bios Version :2005
Video: amd hd5750
Processor: AMD PHENON II X2 550 3.100MHZ
Memory: Crucial
Modele Memory: blt4g3d1608dt1tx0
Capacity: 4GB
greetings to all
i have asus m4a785td-v evo mobo. i ve bought 4 gb crucial ballistix ram today. it says on product its 1600 mhz and cl8 but it shows on my pc 1333 mhz and cl9. when i was searching for this problem i came across this topic: http://forum.crucial.com/t5/Crucial-Ballistix-gaming-memory/Memory-Probleme-With-8GO-Crucial-Ballistix-and-Asus-M4A785TD-V/td-p/9464 can i apply the same settings? how can i fix that? is it possible via bios settings? thx in advance and sry for my bad english. here is some screenshots:

I am not good at RAM setting but the 'Timings Table' shows there is XMP-1600 profile available so I believe it would be enough to turn on that memory profile in BIOS.

Problem with app The App Store is temporarily unavailable. Please try again later.

I have Problem with app Store did conect say is temporarily unavailable.

I'm having the same problem here for the past day or so. I even checked my firewall settings and everything seems to be fine. Can anyone help us?
Message was edited by: BevGB

I have a problem with app store , they say my credict card security code is incorrect but it's correct

I have a problem with app store , they say my credict card security code is incorrect but it's correct

Did you check to see if your credit card has expired or has been frozen? My dad bought some hardware from Canada and it froze his card because it was an out of the country purchase. He called the bank and they turned it back on.

HT204152 hello i have a problem with app store cant download program get this error verification required and no accept my visa card

hello i have a problem with app store cant download program get this error verification required and no accept my visa card

what i can start to download and updated programs

I HAVE PROBLEM WITH APP STORE

I HAVE PROBLEM WITH APP IN APP STORE, IN MY APP STORE I HAVE MANY PURCHASED APPS, BUT NOW I DON'T HAVE ANY PURCHASED IN MY ACCOUNT,WHAT IS PROBLEM
BEST REGARDS!!

Likewise. I have over 1000 apps that I've downloaded. and my screen just shows this:
So it's a global issue for sure. I'm sure Apple is aware of it.

Does anyone has problems with Apps store whenever u rotate the ipad the 4th generation?

Hi,
I have problems with Apps Store whenever I rotate the device it will just auto exit from the apps store and back to home screen.

Try a rest: Simultaneously hold down the Home and On buttons until the iPad shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the iPad back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.

Strange problem with App Id on developer account

Hi,
I have very strange problem with App Id on developer account.
We have uploaded one project with App Id(com.yourcompany.app) and its ready for sale now. Now we have to release update for this application but we could not find that App Id(com.yourcompany.app) on developer account. But strange is that i could not see delete option for App Id.
If i try to create new App Id with com.yourcompany.app name then it shows that it is already being used please select any other name.
Does anyone has faced this type of problem.
Regards,

You shouldn't need to enter the App Id when updating your app. Could you please describe the page in which you're asked for the App Id, and describe how you got to that page?
For example, if I wanted to update Version 1.2 of Ray'sApp, I would log into ITC, then click on +Manage Your Applications+ to get to the "Manage Your Applications" page. On this page I see the icon for every app I have in the store. I then click on the icon for Ray'sApp 1.2 to get to the page titled "Ray'sApp". Next I click the 4th selection to the right on that page: +Update Application+, click No and Continue on the "Export Compliance" page, and get to the "Upload Application" page. On that page I fill in Version Number: 1.3, Language English, Name: Ray'sApp, Keywords ..., What's New in this Version: ..., and the Apple Content Descriptions table. Then I upload the binary.
Following the above example, show us how you got to a step that requested the App Id. Else you might refer to Page 86: Version Updates in the iTunes Connect Developer Guide. In that case, please explain how your update experience differed from the steps in the Guide.
\- Ray

Memory problem with apps on Lenovo IdeaTab A3000-F

Similar Messages

Maybe you are looking for