Memory Requirements Are Ridiculous in Aud C6

I know Adobe support is non-existent because I've tried relentlessly to get the same kind of company support that any other s'ware company would consider a walk in the park, and have yet to have succeeded, and I don't intend to get any support this time.  So, my comment is the fact that when I had Audition 2.0 on my PC that had only 2 Gigs of RAM, or even Cool Edit when I only had 12Meg of RAM (remember those days) I could run the Noise Reduction module with NO PROBLEM AT ALL, and it did a WONDERFUL job.  Further, it was pretty easy to understand.  However, now I have a PC with 16GIGS of RAM, and when I try to run the original NR module, and use the exact settings they suggest, and the same that I used to use it doesn't reduce the noise at all.  I know how to work it because I've been using it since the late 90's, but I reread the instructions anyway, and I WAS doing it correctly; but as I said, no results.  So, I tried the Adaptive NR, and it just spits, and sputters.  It's useless.  When I read the manual it warns that it's memory intensive.  REALLY?  I use Sonar X3 Studio, and Samplitude 12X, and neither one of those chokes like Audition.
That's not the only part of Audition that sucks memory like the govt sux our $$$.  The pitch correction software can't even correct pitches without the same spitting and sputtering.  As some of you may know, Sonar X3 comes with Melodyne Essential, which I think everyone will agree that they are pretty much the reference standard, and pioneer when it comes to pitch correction, yet they have no problem digesting the same files Audition chokes on like a baby.  And Samplitude, which is also a much higher reference software than Audition has no problem.
So, I know someone is going to come back and say with a snarky tone "Well, why don't you use 1 of those programs?".  Well, for my pitch correction issues, I DO use Melodyne.  However, one of the main reasons I upgraded to CS6 was because I THOUGHT it had a great NR module.  And how was I to know that it's such a freakin' memory hog?  After all, even the Sys Requirements only say 2Gig RECOMMENDED, so you would THINK 16Gig MIGHT get the job done.
I just wish I could see the President of Adobe bobbing in the Pacific waiting for some help.

I could happily run all of those Audition effects in CS6 when I only had the maximum of 3.2GB of memory that Win 7 32 bit would allow. So you certainly should not be having any problems with 16GB of memory. AFAIAA the NR in CS6 works just the same as it did before.
The help file doesn't actually say "When I read the manual it warns that it's memory intensive". It says "Important: This effect requires significant processing." which is a bit different.
Lack of memory doesn't usually show itself as what you call "spitting and sputtering" in Audition. Although if the audio buffer is too small it can cause problems. Can you tell us a bit more about the rest of your system. What processor, which OS, where are Audition's audio caches assigned and what audio hardware and drivers are you using?

Similar Messages

  • What are the minimum CPU and Memory requirements for R12 Vision instance?

    We are in the process of trying to figure out what the minimum hardware requirements are for installing the R12 Vision instance. This Vision instance would only have 5 or less concurrent users. We may have to order a new server and we are wondering what the minimum CPU and memory would be? Oracle Support will not give us this information.
    We aleady know how much disk space it will need.
    Dan

    Hi,
    See these links.
    A Primer on Hardware Sizing for Oracle E-Business Suite
    http://blogs.oracle.com/stevenChan/2010/08/ebs_sizing_primer.html
    What Are the Minimum Desktop Requirements for EBS?
    http://blogs.oracle.com/stevenChan/2010/09/ebs_pc_clients.html
    Also, please see old threads for similar discussion.
    Hardware Requirements
    http://forums.oracle.com/forums/search.jspa?threadID=&q=Hardware+Requirements&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Benchmark
    http://forums.oracle.com/forums/search.jspa?threadID=&q=Benchmark&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • What are the disc space and memory requirements for the apps?

    What are the disc-space and memory requirements to run the apps

    Hello John!
    thank you for the info. However, as I have only 1Gb memory and a 32Gb
    solid-state disc, I think that I will stay with Acrobate.com for a while
    longer.
    Regards
    Brianb

  • Is there any tool or method to find the exact disk space/memory required for a query to execute in certain time

    Hi,
    We have SSIS Package, which in-turn executes some Stored procedures . 
    This Package runs fine at certain time, say 30 minutes which is acceptable. But sometimes, it takes around 1.5 hr. There was no modification done to the package, and the amount of data handled by the package is also same.
    I have a doubt that some other big process may be running in parallel when this package is getting executed.
    All the Databases are on D drive in the server and currently there is 140 GB free space out of 1 TB.
    Now, using sp_who2 I can check what are the big processes which are running in parallel when this package is getting executed and get their Disk I/O.   
    Now having these information, is there any way to determine, amount of space/memory required to execute a particular query in 30 minutes.
    Or to put a question in other way, I have a query and I know its acceptable execution time(30 min). Now is there any way to determine the criteria to get that execution time.
    NOTE: The query is optimized and required indexes are created. It was running fine, until 1 week back. Suddenly the execution time has increased.
    Can some one please help me in this. Please let me know if you need any further information on this.
    Also whenever these jobs are running, sometimes job activity monitor and SSMS gets frozen. Any idea what does this indicate?
    Thanks in advance,
    Raksha

    Perhaps blocking?
    Take a look at Adam's great stored procedure to see who is running on the server
    Who Is Active? v10.00 (2010-10-21)
    (C) 2007-2010, Adam Machanic
    Feedback: mailto:[email protected]
    Updates: http://sqlblog.com/blogs/adam_machanic/archive/tags/who+is+active/default.aspx
    "Beta" Builds: http://sqlblog.com/files/folders/beta/tags/who+is+active/default.aspx
    License: 
    Who is Active? is free to download and use for personal, educational, and internal 
    corporate purposes, provided that this header is preserved. Redistribution or sale 
    of Who is Active?, in whole or in part, is prohibited without the author's express 
    written consent.
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • Application Server Memory Requirements from 4.6C to ECC 6.0

    The projected physical memory increase for the Application servers from 46C to ECC6 appears to between 45% - 66%.  This is based on the delta notes 517085, 752532, 778774 and 901070.  It also appears from a presentation from Christian Oehler called "Transition and Upgrade to SAP ERP" to be the case.
    I cannot find anything in the above referenced SAP notes that indicates where this additional memory is consumed, so I'm concerned SAP is factoring in new functionality and/or JAVA stack in this.  Furthermore we have upgraded our HR system from 46C to ECC6 sometime ago and included JAVA and saw around a 20% memory increase.
    We are doing a strictly technical upgrade and are not turning on new functionality at this point (no JAVA stack), we are also not increasing user population.  Our Test Systems, which have production data volumes do not reflect any growth in this area,  but we are not stressing it with user load.
    Does anyone have an idea of what we could/should see given the nature of our upgrade?  We are preparing for a 25% increase in App server memory, but not for 50% plus.  We are not doing a sizing exercise since this is just a technical upgrade and the GLFU service has yet to start.
    If anyone has any insight into what should be expected or what they have seen for memory requirements from 4.6C to ECC 6.0 Application Server sit would be greatly appreciated.
    Thanks

    Hi Mark,
    More memory is required because ECC 6.0 is much more huge system than 4.6C. If you are planning to increase server memory by 25% only, than you can see performance problems if system will be heavyly used. But it depends mainly on number of WP and active users. 25-50% more memory is required if you are not installing J2EE addin afterwards. If you are planning to convert the database to Unicode, than you will need an additional memory....
    It's not easy to say 25% will be enought or 50% is required, but I would suggest to go to 50% at least.
    Jiri

  • How do I determine memory requirements?

    A development team asked me to determine memory requirements for Oracle Portal 10.1.4 implementation. I don't know how to do that, since I am not a software engineer or a systems analyst. The assumptions are: 1.) 6,000 users at peak, with incremental build out over a 24 month period, 2.) about 1,000 users that are actively submitting requests at any one time through their browsers (generating actual load on the servers), 3.) total storage usage for the portal is approximately 5 gigabytes, and 4.) OracleAS 10g architecture (with infrastructure and middle tier servers) would be the proposed HA architecture. 5.) access to the portal would be 18 hours per day, possibly 24 hours a day for a period of 4 months.
    How would I estimate the memory requirements for access and storage for this critical mission portal?

    http://www.oracle.com/technology/products/ias/portal/pdf/oow_10gr2_1337_pepper.pdf

  • Is it possible to bypass Sun ONE's memory requirement?

    Dose anyone know how to bypass the memory requirement of Sun ONE Application Server at installation time?
    We have to install Sun ONE on to some of the laptops (for mobility) but some of these laptops have a maximum memory configuration of 192MB, in which the Sun ONE App Server requires 256.
    The platforms we are using are Windows 2000 Server and Windows 2000 Professional. We are thinking of possible patches or modifying the config files to bypass this requirement.

    Could you describe what exactly seems to be the problem?
    While installer is checking for available amount of memory on Windows platform, it should show warning screen but still let you proceed with product installation.

  • SOS...Cant Install CS5, Exit Code 7, memory requirement not met, etc.

    I am attempting installation of newly purchased CS5 Design Premium.  My system will not support InDesign so I unchecked that before attempting install. I ran install under normal and safe boot and the following messages occur in each..
    Exit Code: 7......0 fatal error(s), 65 error(s), 124 warning(s) 
    WARNING: DW036: Payload cannot be installed due to dependent operation failure, and so on...
    and the first of the errors....
    ERROR: Updating driver data failed. Driver entry was not added. ARP estimated size 3726KB
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe WinSoft Linguistics Plugin CS5: Install failed
    ERROR: DW050:  - Adobe CSXS Infrastructure CS5: Install failed
    ERROR: DW050:  - SiteCatalyst NetAverages: Install failed,
    and so on, stating all installations had failed.      
    My file system is Journaled HFS+ , (is this case-insensitive??) with 30 GB free. I am running a 32bit MacBook with OSX 10.6.8  I have been on with tech support where I purchased the CS5 design premium. I have 1GB RAM, I was told by them that I need 2GB, the box system requirements state it needs 1GB and the read me file says I need 500MB.
    Is this something that would prevent my install and cause these install errors under exit code 7?  The warning pertaining to dependent operation failure seems too generic to help at all.  I have been trying to get this program up and running for a week and my work is piling up, please help or advise.  My head is spinning!
    Note: Please keep in mind that I am new to Mac OS. I always been stuck with a Windows PC until recently. Therefore some things are difficult for me to grasp at this point.
    THANK YOU FOR ANY AND ALL HELP!SOS...Cant Install CS5, Exit Code 7, memory requirement not met, etc.

    Exit Code: 6, Exit Code: 7 Installation Errors - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs

  • CUCM OIDS (CPU, Memory , IO are not available)

    Hello CISCO,
    The below CUCM OIDS (CPU, Memory , IO are not available)
    Can you please  review and confirm they are valid from you end please?..
        cpu_idle cpu_sys cpu_usr memory_free._total memory_total._total memory_used._total os_iorawin os_iorawout os_loadavg.2 os_loadavg._total os_rawcontxts os_rawinterps swap_free._total swap_total._total swap_used._total 
        vg_snmp_driver: bad response for .1.3.6.1.4.1.2021.11.11.0: .iso.org.dod.internet.private.enterprises.ucdavis.systemStats.ssCpuIdle.0 = No Such Object available on this agent at this OID
    vg_snmp_driver: bad response for .1.3.6.1.4.1.2021.11.10.0: .iso.org.dod.internet.private.enterprises.ucdavis.systemStats.ssCpuSystem.0 = No Such Object available on this agent at this OID
    vg_snmp_driver: bad response for .1.3.6.1.4.1.2021.11.60.0: .iso.org.dod.internet.private.enterprises.ucdavis.systemStats.ssRawContexts.0 = No Such Object available on this agent at this OID
    vg_snmp_driver: bad response for .1.3.6.1.4.1.2021.11.59.0: .iso.org.dod.internet.private.enterprises.ucdavis.systemStats.ssRawInterrupts.0 = No Such Object available on this agent at this OID
    vg_snmp_driver: bad response for .1.3.6.1.4.1.2021.4.4.0: .iso.org.dod.internet.private.enterprises.ucdavis.memory.memAvailSwap.0 = No Such Object available on this agent at this OID
    vg_snmp_driver: bad response for .1.3.6.1.4.1.2021.4.3.0: .iso.org.dod.internet.private.enterprises.ucdavis.memory.memTotalSwap.0 = No Such Object available on this agent at this OID
    vg_snmp_driver: bad response for .1.3.6.1.4.1.2021.11.9.0: .iso.org.dod.internet.private.enterprises.ucdavis.systemStats.ssCpuUser.0 = No Such Object available on this agent at this OID
    vg_snmp_driver: bad response for .1.3.6.1.4.1.2021.4.6.0: .iso.org.dod.internet.private.enterprises.ucdavis.memory.memAvailReal.0 = No Such Object available on this agent at this OID
    vg_snmp_driver: bad response for .1.3.6.1.4.1.2021.4.5.0: .iso.org.dod.internet.private.enterprises.ucdavis.memory.memTotalReal.0 = No Such Object available on this agent at this OID
    vg_snmp_driver: bad response for .1.3.6.1.4.1.2021.11.58.0: .iso.org.dod.internet.private.enterprises.ucdavis.systemStats.ssIORawReceived.0 = No Such Object available on this agent at this OID
    vg_snmp_driver: bad response for .1.3.6.1.4.1.2021.11.57.0: .iso.org.dod.internet.private.enterprises.ucdavis.systemStats.ssIORawSent.0 = No Such Object available on this agent at this OID
    vg_snmp_driver: bad response for .1.3.6.1.4.1.2021.10.1.5.2: .iso.org.dod.internet.private.enterprises.ucdavis.laTable.laEntry.laLoadInt.2 = No Such Object available on this agent at this OID 

    Whiile 4-core cpus are common in home machines still, 4 cores is pretty low nowadays in performance servers like a R730. If you aren't seeing an option for a 4-core cpu, it is likely no longer available.Remember, just because it SUPPORTS 4-core and greater cpu's doesn't mean that they OFFER them anymore.I'd guess (without actually speccing one out) that 6 or 8 is the lowest-core CPU available for a R730 now.All I see on this spec sheet for the R730 is "Intel Xeon processor E5-2600 v3 product family". If there is a 4-core in that family, that doesn't mean it is going to be sold with the server.
    R730 Spec SheetDoes your client need a 4-core machine? Seems a bit behind the times.
    dharmendrajaiswal wrote:While dealing with Dell & HP for our customer requirement, received revert that 4 cores are no more available with recent servers.What does...

  • SQL server client memory required

    Hy
    I want to ask, that I have a MS SQL 2000 Enterprise edition server. How much memory required per client. I know, the SQL system memory required (more 1 G) but my question is, if my SQL server use plus one client, how much memory must take in my blade?
    pls help

    Although there are some thumb rules out there, it is hard to tell as you did not specify which kind of access the users are doing at the database. For ressource intensive querying you should put more memory in your server, where on the other hand you would not have that much memory for users doing plain and simple (Select / DML ) operations. How many users do you have, how many are connected on average, what are they doing on the database ?
    Jens K. Suessmeyer.
    http://www.sqlserver2005.de
    ---

  • Memory requirement is continiously increased when i am running my application program in an infinite loop,after certain time it shows an error called low virtual memory

    memory requirement is continiously increased when i am running my application program in an infinite loop,after certain time it shows an error called low virtual memory

    What are you doing with your program. Lots of improper programming techniques can cause this - building arrays, concantanating strings, opening but not closing refrences, etc. Need more details or post your VI. Also, have you looked at "LabVIEW Performance and Memory Management"? It's part of the shipping documentation and available from Help>Search the LabVIEW Bookshelf.

  • % waas enable failed: WAAS memory requirements not met

    Dear Team,
    We have upgraded our WAAS devices to 5.0.1 and upgraded the brach router that having waas express license to 15.2 3 T. Now we are getting following error while we are enabling the waas from WAN interface.
    % waas enable failed: WAAS memory requirements not met.
    before upgrading the branch router itsWAAS  working fine and we are facing this issue after upgrading the router from 15.1 to 15.2.
    Branch router Model: 1941.
    Kindly suggest why we are getting these error while we are enabling the WAAS in Wan interface.
    Please find the below mentioned show version output from branch router.
    BRouter#sh ver
    Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.2(3)T, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2012 by Cisco Systems, Inc.
    Compiled Fri 23-Mar-12 15:35 by prod_rel_team
    ROM: System Bootstrap, Version 15.0(1r)M12, RELEASE SOFTWARE (fc1)
    HB2503R0 uptime is 4 hours, 50 minutes
    System returned to ROM by reload at 17:25:07 IST Sat Sep 22 2012
    System restarted at 17:26:42 IST Sat Sep 22 2012
    System image file is "flash:c1900-universalk9-mz.SPA.152-3.T.bin"
    Last reload type: Normal Reload
    Last reload reason: Reload Command
    Cisco CISCO1941/K9 (revision 1.0) with 2269152K/90112K bytes of memory.
    Processor board ID FGL1549221B
    2 Gigabit Ethernet interfaces
    2 Serial(sync/async) interfaces
    1 terminal line
    1 Virtual Private Network (VPN) Module
    1 cisco Embedded service engine(s)
    DRAM configuration is 64 bits wide with parity disabled.
    255K bytes of non-volatile configuration memory.
    250880K bytes of ATA System CompactFlash 0 (Read/Write)
    License Info:
    License UDI:
    Device#   PID                   SN
    *0        CISCO1941/K9          FGL1549221B
    Technology Package License Information for Module:'c1900'
    Technology    Technology-package           Technology-package
                   Current       Type           Next reboot
    ipbase        ipbasek9      Permanent      ipbasek9
    security      securityk9    Permanent      securityk9
    data          None          None           None
    Configuration register is 0x2102
    Brouter#
    Brouter#sh flash
    -#- --length-- -----date/time------ path
    1     55398712 Nov 29 2011 20:37:04 +05:30 c1900-universalk9-mz.SPA.151-4.M2.bin
    2         2903 Nov 29 2011 20:58:52 +05:30 cpconfig-19xx.cfg
    3      3000320 Nov 29 2011 20:59:06 +05:30 cpexpress.tar
    4         1038 Nov 29 2011 20:59:16 +05:30 home.shtml
    5       122880 Nov 29 2011 20:59:24 +05:30 home.tar
    6      1697952 Nov 29 2011 20:59:38 +05:30 securedesktop-ios-3.1.1.45-k9.pkg
    7       415956 Nov 29 2011 20:59:52 +05:30 sslclient-win-1.1.4.176.pkg
    8     66415436 Sep 22 2012 17:24:06 +05:30 c1900-universalk9-mz.SPA.152-3.T.bin
    129417216 bytes available (127070208 bytes used)
    Brouter#sh hardware
    Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.2(3)T, RELEASE SOFTW
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2012 by Cisco Systems, Inc.
    Compiled Fri 23-Mar-12 15:35 by prod_rel_team
    ROM: System Bootstrap, Version 15.0(1r)M12, RELEASE SOFTWARE (fc1)
    Brouter uptime is 4 hours, 51 minutes
    System returned to ROM by reload at 17:25:07 IST Sat Sep 22 2012
    System restarted at 17:26:42 IST Sat Sep 22 2012
    System image file is "flash:c1900-universalk9-mz.SPA.152-3.T.bin"
    Last reload type: Normal Reload
    Last reload reason: Reload Command
    Cisco CISCO1941/K9 (revision 1.0) with 2269152K/90112K bytes of memory.
    Processor board ID FGL1549221B
    2 Gigabit Ethernet interfaces
    2 Serial(sync/async) interfaces
    1 terminal line
    1 Virtual Private Network (VPN) Module
    1 cisco Embedded service engine(s)
    DRAM configuration is 64 bits wide with parity disabled.
    255K bytes of non-volatile configuration memory.
    250880K bytes of ATA System CompactFlash 0 (Read/Write)
    We are geeting the "SSL hand shake failed while communicating with WAAS express device " critical warning from Central manger GUI for the same branch express. Kindly suggest how we can resplve this issue.
    Thamks in Advance.
    Regards.
    Ranjith

    Hi Ranjith,
    Can you try the following commands on your router and see if it helps:
    configmemory-size iomem 5
    If it doesn't and that you are sure you have enough memory on your router to support WAAS Express, I would advise you to open a TAC case to have this investigated in depth.
    Regards,
    Nicolas

  • TS2986 I installed Snow Leopard, upgraded it to OS X 10.6.8, paid for and spent the hours necessary to download Lion, but Lion will not install.  Even though it says the requirements are 10.6.6 or greater, when I try to install, it says I need 10.7.

    I installed Snow Leopard, upgraded it to OS X 10.6.8, paid for and spent the hours necessary to download Lion, but Lion will not install.  Even though it says the requirements are 10.6.6 or greater, when I try to install, I get a message saying I need 10.7. to install Lion.  What should I do?

    Hi..
    Make sure your Mac meets Lion's requirements.
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OSX v10.6.6 or later (V10.6.8 recommended)
    7GB of available spare
    From here > Apple - OS X Lion - Technical specifications
    If your Mac meets the requirements, installing the Mac OS X 10.6.8 Update Combo reinstalls the App Store for you which may help.
    Restart your Mac after instaling the combo installed. It's ok to do this even though you are already running v10.6.8.
    If you have anti virus software installed, you may need to disable that in order to install Lion.

  • CUCM 6.X - VmWare Memory Requirement

    Hi there,
    I just installed a CUCM 6.x on a VmWarare and it's seems to works fine except....
    From another PC, I access it by web and it is so slow.. It's pretty much if I can't login because it's too slow.
    What are the physical memory requirement on the PC that I've install the Vm to run CUCM.
    thanks a lot

    Hi Philippe,
    What OS are you running? Have you thought of running Linux?
    Linux would run this more smoothly then windows will especially with so little ram.
    I would set the OS as linux and install VMWare Server. Load the VMWare Image. Back online.
    or
    Upgrade your ram to atleast 1gb. Set your pagefille to 1.5 GB min and 1.5 max with the Windows OS as this will help in stoping your windows os in pagefile allocation.
    HTH, Please Rate
    Regards,
    Justin

  • Memory Slot Utility "memory modules are installed in the recommended slots"

    I've got two Mac Pros that give me this message. Every time I boot them up the Memory Slot Utility gives me the message that my memory modules are installed in the recommended slots.
    This started after I installed an additional 8GB of RAM, bringing them up to 16GB. 8x2GB sticks.
    I checked the login items and it's not there, so what else could I be missing?

    I have this problem too on a Mac Pro Quad Early 2009.
    Has 2x4GB + 2x1GB Runs fine with 10GB, but everytime I log in the memory utility pops up as if I have a problem.
    How do I stop it annoying me?

Maybe you are looking for