Memory Slot Utility "memory modules are installed in the recommended slots"
I've got two Mac Pros that give me this message. Every time I boot them up the Memory Slot Utility gives me the message that my memory modules are installed in the recommended slots.
This started after I installed an additional 8GB of RAM, bringing them up to 16GB. 8x2GB sticks.
I checked the login items and it's not there, so what else could I be missing?
I have this problem too on a Mac Pro Quad Early 2009.
Has 2x4GB + 2x1GB Runs fine with 10GB, but everytime I log in the memory utility pops up as if I have a problem.
How do I stop it annoying me?
Similar Messages
-
Can I use 2gb memory in one slot in my 2006 Mac mini as the 2 slots of 1gb only reports as 1gb memory, both memory work ok in the one slot as I have swapped them over
To my knowledge 1GB modules are the max. size for the 2006 Mini.
2GB modules are not recognized/useable.
Sorry
Stefan -
Beta or prerelease versions of Creative Suite 5 Master Collection are installed on the machine
Hi,
I try to re install the CS5 master collection that I have but this message appear :
Beta or prerelease versions of Creative Suite 5 Master Collection are installed on the machine, and must be uninstalled before this installation can proceed. Please uninstall these products, restart your computer, then run this installer again.
I erase all that is link to Cs5 but I think something still there.
Can someone help me ?
Thanks a lot
RochOk will you can try running the uninstaller which is located in Applications/Utilities/Adobe Installer. It may not function due to the method you utilized to remove the software. If you still have problems then you can try running the CS5 Cleanup Script - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
-
why am I still getting this message after logging in? "This computer is no longer authorized for apps that are installed on the iPhone “*************s iPhone”. Would you like to authorize this computer for items purchased from the iTunes Store?" - after I have logged in and get the message that the computer is already authorized!!!?? - and then the above message pops up again?
Click here and follow the instructions.
(71175) -
while trying to sync with my iphone I recieve the message: This computer is no longer authorized for apps that are installed on the iPhone “Terri George’s iPhone”. Would you like to authorize this computer for items purchased from the iTunes Store? When I put in my password and hit authorize, I get a message telling me there was an unknown error (-50). Would love to sync today. Any help would be appreciated.
The -50 error is documented in this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
Here is a synopsis:
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network. -
when syncing iPad to MacBook Pro itunes says "this computer is no longer authorized for apps that are installed on the ipad" . When I enter my id and password it tells me the computer is authorized.
http://support.apple.com/kb/TS1389
-
When I use my iMac (os x 10.6.8) with iTunes (11.0.01) to sync my iPod and ipad all of the selected viedos are installed on the iPod touch and only one or two are install on my iPad (model MD513LL/A)? With the same selections???
Has no one seen this anomaly, all of the videos are mp4's mostlly frokm U-tube.?
-
Hello.
I get this error message
iTunes can not sync apps to the iPhone because it can not be determined which apps are installed on the iPhone.
iTunes kann keine Apps mit dem iPhone synchronisieren weil nicht festgestellt werden kann welche Apps auf dem iPhone installiert sind.
Need HelpBasic troubleshooting is reset, restart, restore. Have the first two been tried?
How about simply unplugging the iPhone and plugging it back in to sync?
What has been done in an attempt to troubleshoot the issue? -
There must be threads about this, but apologies for my inability to find any.
As the title says: I plug my iPhone or iPad into my iMac, and when I look at the memory allocation as displayed in iTunes, 6GB or whatever are free. Then I sync again, and suddenly 8GB are free. Sync again, and now 2GB are free - even though nothing has changed. I get this with both iOS devices.
Additionally, often what iTunes shows has no relationship to what the device says when I go into Settings: last week iTunes believed there were 0GB in Photos - because after all I had erased them! - but the iPad recorded 25GB, somehow.
Is this a known issue, or is something screwy with my system?
Thanks in advance!Thanks, but that's not really the issue. I do manage it manually - I've got a lot of smart lists, smart photo albums, and so on, all set up to sync with the iOS devices.
The problem is that the iPhone/iPad memory, as displayed in iTunes when the device is plugged in, seems to be very inaccurate and variable. When I plug the iPhone or iPad in, iTunes tells me (for example) that, with current settings, 5GB will be free. It syncs, and then suddenly 2GB are free. I sync again - changing nothing, so there should be no change in memory allocation - and suddenly 6GB are free. Somehow, despite syncing no books at all, there's a bizarre 60MB "Book" that iTunes tells me is sometimes on the iPhone, and sometimes not. That little stretch of purple just suddenly appears some days.
At times it tells me it's too full and can't sync at all. So I wipe, for example, 6GB off the "too full" iOS device, and after doing that suddenly 10GB are free, so I put the 6GB back on no problem. And after I add that 6GB back on, maybe there are 8GB free, or maybe 2GB, or maybe 4GB. In my world, 10GB-6GB=4GB, but iTunes is using quantum arithmetic or something.
Wiping a lot of photos off was great fun. I had iTunes unsync and remove all photos - so, in that line at the bottom, all the photo memory allocation disappeared. Cool. Mission accomplished. Then I clicked to another tab in iTunes, and suddenly the photo memory jumped back up to 15GB. Looked back in the Photos tab - nope, I'd told it to sync no photos at all. Checked the iPhone itself: oh, neat. 25GB of photos, despite not syncing any. Eventually, after repeating the process several times, all the photos were eventually gone, but the whole process was bizarrely complicated.
Basically, when I plug the iPhone or iPad into iTunes, iTunes seems to have no idea what the memory allocation actually is - which occasionally makes syncing complicated.
It's not a giant issue, but it's quite annoying - and I'm wondering if this is just me, or if this is a common issue. I think this issue may also be discussed in some of the "can't delete songs" or "can't delete photos" threads, but some of those threads are so long and cover so many different problems that they're kind of hard to read. -
We have PCI-6110 S series installed in our computer. We are planing to purchase PCI-6024 E series card. They will be both installed at the same computer.
1) I am wondering if we run both of them at the same time, would we have any problem?
2) To run PID real time, can any E series of PCI card be used?
Thanks...Hello Baho,
1) Using Traditional NI-DAQ, there could be problems with the fact that the NI-DAQ driver is not multi-threaded; meaning that while waiting for one operation to complete, the driver could cause another operation to time out. On the other hand, DAQmx is multi-threaded, and would eliminate this problem. At the time of this writing though, DAQmx does not yet support simultaneous-sampling boards like the PCI-6110S. A good solution then would be to use Traditional DAQ for the 6110S and DAQmx for the E-series board, and they would by default run in separate threads.
2) No, using a PCI E-Series board, the LabVIEW VI would have to run in a Windows OS and would not be Real Time or run deterministically. You can run the PID program in Windows, but the
results could be inconsistent. The advantage of a Real Time is that the OS is deterministic or that the OS allows you to tightly control or determine the maximum time any function takes to operate. This kind of control of the maximum operation time is not possible with non-Real Time OSs such as Windows.
If you would like to get set up with a Real Time System, I suggest you contact your Technical Sales Representative.
Regards,
Chad Evans
National Instruments -
When I try to authorize the computer it says that it already is. I say OK, and it goes around and asks the same question. Not sure what to do. Can you help?
The -50 error is documented in this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
Here is a synopsis:
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network. -
How to identify Which function modules are used in the planning area?
Hi all,
there are couple of function module derviation is used to derive the calendar year, month, fiscal period etc.
But how to identify which function module is used in which planning area?
I cant find out from the where used list from function modules?
Thanks
poojaHi Pooja,
Go to characteristic relationship tab,click on detail icon on extreme left of the derivation,there you will get the name and the details of function module used for derivation.
Regards,
Indu -
How to determine which packs are installed on the Oracle Enterprise Edition
IS there any way to determine which option packs have been installed on 10g oracle enterprise edition . i don't seem to have grid control installed ?
Is there some easier way to determine this ?
regards
AjayNo orainventory directory found However, it's the best way to know what are the installed product against your ORACLE_HOME.
You can run the OUI and look for the installed components if any.
Nicolas.
PS : you need to log on your server. -
The following windows 2000 hotfix patches were installed on
windows 2000 operating system -
KB917537
KB917159
KB914388
Coldfusion service stopped working and wouldn't restart
later...When I uninstalled the patches. I got back coldfusion. Do I
have to make changes in the settings of coldfusion administrator
for having hotfix patches?Princess MX wrote:
> Please see the attached in response.
All of these are old and show CF working just fine. Do you
have any
errors from the time CF stopped working? Is there anything in
the event
viewer? When you say "stop working", do you mean fails to
start, throws
errors, silently fails? How have you configured CF?
Multiserver? Single
server? Does CF still work through the built-in webserver?
Can you start
CF from the command line jrun?
Jochem
Jochem van Dieten
Adobe Community Expert for ColdFusion -
Check details about which products are installed in the Oracle Home
I cheked one PDF: <epm-tips-issue 73-102>
This command should return with details but giving some errors-
1)
opatch lsinventory -oh /scratch/aime1/work/Oracle/Middleware/EPMSystem11R1 -jre /scratch/
aime1/work/Oracle/Middleware/jdk160_11
2)
opatch lsinventory –detail -oh /scratch/aime1/work/Oracle/Middleware/EPMSystem11R1 -jre /
scratch/aime1/work/Oracle/Middleware/jdk160_11
Please suggest if i am making mistake as i am using as it is (not making any alteration>
Please suggest any other better process if possible
Regards
KumarWhat errors are you getting, I take it you have updated the Oracle home and JRE location to match your environment.
Cheers
John
http://john-goodwin.blogspot.com/
Maybe you are looking for
-
When I navigate from one report to another report on a dashboard, is it possible to stay in the same window/section, i.e. the navigated report replace the report I'm on, instead of having a new window? I went to the dashboard Edit Page. I enabled 'Dr
-
Migrating SAP NetWeaver WebDynpro 7.0 Applications to WebDynpro 7.3/7.4
Hi, We are trying to migrate applications from SAP NetWeaver Portal 7.0 to 7.4. The applications were created using SAP NetWeaver WebDynpro Java 7.0 and we're trying to import the Development Components (DC) using SAP NetWeaver Development Studio CE
-
Hi! I 've a problem with my ipad mini. Does anyone know if there is a way to get out from recovery mode without reinstall iOS?
-
We have a wireless internet conundrum (who doesn't).
We have a wireless internet conundrum (who doesn't). I have a new Airport Extreme Base-station (n-standard) in our basement. I bought this after frustrations with linksys and belkin routers as far as distance from router connection is concerned. My i
-
Photoshop elements 3 Bilder in tif laden
Wenn ich meine Bilder von der Kamera lade, erscheinen sie in elements als jpg-Datei (so hat die Kamera sie auch geschrieben). Gibt es eine Möglichkeit, dass Photoshop elements diese Bilder beim Herunterladen gleich in tif-Dateien umwandelt?