Memory timing setting at BIOS not working

Question

hi,
Before I start, this is my PC:
Mobo: MSI X58 Pro-E
BIOS: 8.F
CPU: Intel Core I7 930 (2,8 GHz)
RAM: 2 x (OCZ3P1333LV6GK) 12 GB
Vid: Saphire HD5870 Vapor-X OC Edition
PSU: Ultra LSP750
HDD: WD 1.5 TB 32 MB Buffer 7200 RPM
Chipset: Intel X58+ICH10R
OS: Windows Ultimate 7 64 bit
My system was running ok with 3 DIMMs at 1066Mhz, but now with 12GB I am getting BSODAND and programs are crashing. I noticed that when I try to manually set the timing at BIOS advanced memory setup and reboot, I press F5 (Memory-Z) and the timings are always the same 7-7-7-16 even if I put any other timing at the BIOS menu. Maybe am I missing some other setup? How can I change that timing?

Answer 1

I already did that but with 1.65V at 1066 and 1333MHz. I changed in BIOS but it seems its not really working to change the timing. I try to change at BIOS to 7-7-7-24 8-8-8-24 9-9-9-30.
CPU-Z doesnt work here but I got PC wizard and these are the infos:
Memory Information :   
DRAM/FSB Ratio :   8/2
Supported Channels :   Triple
ECC Diagnostic :   Yes   -   Disabled
CAS Latency (tCL) :   7 clocks
RAS to CAS (tRCD) :   7 clocks
RAS Precharge (tRP) :   7 clocks
Cycle Time (tRAS) :   24 clocks
Row Refresh Cycle Time (tRF...   59 clocks
Command Rate :   2 T
And
Supported Frequencies :   381MHz, 457MHz, 533MHz, 610MHz
CAS Latency (tCL) :   5 clocks @ 381MHz, 6 clocks @ 457MHz, 7 clocks @ 533MHz, 8 clocks @ 610MHz
RAS to CAS (tRCD) :   5 clocks @ 381MHz, 6 clocks @ 457MHz, 7 clocks @ 533MHz, 8 clocks @ 610MHz
RAS Precharge (tRP) :   5 clocks @ 381MHz, 6 clocks @ 457MHz, 7 clocks @ 533MHz, 8 clocks @ 610MHz
Cycle Time (tRAS) :   12 clocks @ 381MHz, 14 clocks @ 457MHz, 16 clocks @ 533MHz, 19 clocks @ 610MHz
Min TRC :   19 clocks @ 381MHz, 23 clocks @ 457MHz, 27 clocks @ 533MHz, 31 clocks @ 610MHz
I am running only 3 DIMMs at the moment so I can use the pc without problem.