Memory to go website...

Anybody use the www.memorytogo.com website to purchase memory. I noticed they have several selections for the PowerMac G5. An OEM version and Samsung. Just curious which is better? The prices seem to be pretty good compared to some of the local stores.

DVX100Shooter-
I never used that company. I have used memory from www.datamem.com. The prices seem comparable to the memorytogo site, and they are located in NH so the shipping to you should be fairly quick.
I have never had anything but excellent service from these folks.
Luck-
-DaddyPaycheck

Similar Messages

Memory Question for min 2011 iMac

I want to add more memory for my imac. I done the searches but I'm getting bits and pices of info so here are my questions ( I have 8gb of memory installed now. 2x4 gb)
1. how much can i put in the 16 apple says or 32 ive read? (or any inbetween)?
2. Apple sells the memory on their website ($200 is a lot for 8 gb) where can i find the same for less? ie. waht's the best memory for my imac out there?
3. It looks esy to install. Is it?
Thanks!

Your first line is just incorrect. It is what Apple TESTED the unit with when it was first in production.
Apple recommends only 8Gbs in both the late 2011 model MBPs and even on the Mid 2012 model MBPs when it can actually take 16GBs of RAM with No Problems. Other manufacturers do that also. I have a Dell E6420 that Dell and even Crucial state that it can only take 8GBs. I have 16GBs installed.
To order that 16GBs from Crucial I had to punch in my late 2011 MBP as the model. When I used the Dell E6420 it came up with 8GBs. The package I got from crucial stated Mac Memory. Works fine in my Dell as the Mac and Dell use the Same Intel Chipset.
It is up to the Intel Chipset as to how much memory can be installed. If the intel chipset supports 16GB you can use 16GBs. if it supports 32GBs you can install 32GBs
ComputerFixer wrote:
1) I would stick with the 16 apple says. While others may have gotten it to work on 32, there is a reason apple recommends 16.
2) Crucial and OWC are the best memory you can find. If you are looking for cheaper memory, PNY may work as well, but I would highly recommend using Crucial memory.

Memory Upgrade for T61

Hi friends,
I have a T61 7663-xxx system, with 1 GB PC2-5300 667 MHz RAM. My Front Side Bus is 800 MHz ( I think so!), Everest software reports my memory controller is dual channel capable, and ~ 85% physical utilization of RAM. I have a nVidia Quadro NVS 140M 128 MB graphics card, but Everest reports 512 MB ?
I would like to upgrade my RAM, and buy some online.
a) Should I buy a similar 2 GB PC2-5300 RAM for my system for performance boost, running Windows XP 32 bit? If so, should I buy Lenovo RAM only, for maintaining my 3 year warranty intact?
Only ThinkPad and Lenovo memory will assume ThinkPad and Lenovo notebook systems limited warranty
b) What are the other best alternatives for good quality, reliable laptop memory, besides Lenovo?
c) Would it be better if I am able to buy RAM which can match my FSB? Will this have any performance benefit? Do these similar FSB speed RAM exist?
Kindly suggest top memory makers, if any.
I could not find any Lenovo 800 MHz memory from their website.
Kindly help me solve my memory upgrade problem.
I am a mechanical engineering student, hence I don't have any idea about FSB and the like, so I request the learned members to cast light on this area.
Info about reputed online sites in US, with fast delivery will be very much appreciated.
Thanks in advance.
Best Regards,
Raiden
TU Hamburg, Germany
Solved!
Go to Solution.

Hmm. As far as I know, the internal graphics card can't be upgraded. There's some dock you can buy that lets you add a graphics card for use with an external monitor, but I don't know much about it. The cpu is more likely to be upgradeable, but don't attempt unless you know a decent amount about hardware servicing. Also, make sure the cpu will be supported by the motherboard! Best not to buy one with a clockspeed higher than what Lenovo sold (core 2 duo at 2.6 ghz).
Why do you want to upgrade so much? I run 2.1ghz with discrete graphics and 2gb ram under Vista, and it runs beautifully. If you have integrated graphics, then that might be a bit of a pain, but hey, you've got better battery life!
Anyway, I'd look more into de-cluttering your computer to speed stuff up. Remove anything you don't need, especially Lenovo tools that run in the background and you may not need. Turn off search indexing (slower searches, but faster overall performance). There are some nice guides online, if you google "vista tuneup."
Good luck! Enjoy your T61 as it is! It's a lovely laptop

How do i add memory to my imac?

I plan on buying 1gb of Ram to add to my iMAC, however i don't see any spot on the system where the RAM card would fit in. The last thing I want to do is buy the memory and have no idea how to apply it so can anyone tell me like a step by step procedure to adding memory.
Also i'm a little thrown off by the prices of the memory.
One website tells me 1gb of Ram will cost me 300 bucks... and another tells me it will only cost about 100... can anyone explain that as well?

One website tells me 1gb of Ram will cost me 300 bucks... and another tells me it will only cost about 100... can anyone explain that as well?
You get what you pay for. IMO, quality RAM is well worth the $$$$ in terms of reliable performance. Seconding the previous poster, purchase the RAM from a reputable firm who carry Apple certified chips.
I purchase my RAM from MacRam Direct. Been a customer of theirs since 1999. Very dependable service and product.
iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD Mac OS X (10.4.7) LaCie 160gb d2 HD Canon i960 printer

Java heap memory errors..

I make a spider program, but it runs out of memory after ~200 websites.
after that it crashes.. or becomes so slow its useless.
The problem is in this Spider class , that cant be garbage collected (But I dont see any reason why not)
These profilers i have seen show you that memory is allocated and cant be garbage collected , but not where ? Can anyone give suggestions what can be wrong with this class or tell how they fix memory problems?
peter
import java.util.*;
import java.net.*;
import java.net.MalformedURLException;
import java.net.URL;
import java.net.URLConnection;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.io.PrintWriter;
import org.htmlparser.util.ParserException;
import org.htmlparser.Node;
import org.htmlparser.NodeFilter;
import org.htmlparser.Parser;
import org.htmlparser.PrototypicalNodeFactory;
import org.htmlparser.tags.BaseHrefTag;
import org.htmlparser.tags.FrameTag;
import org.htmlparser.tags.TitleTag;
import org.htmlparser.tags.HeadingTag;
import org.htmlparser.tags.LinkTag;
import org.htmlparser.tags.MetaTag;
import org.htmlparser.util.EncodingChangeException;
import org.htmlparser.util.NodeIterator;
import org.htmlparser.util.NodeList;
import org.htmlparser.util.ParserException;
import org.htmlparser.beans.StringBean;
public class Spider implements Runnable {
   private URL base;
   private int siteid;
   private int companyid;
   private int MaxPaginas;
   protected Collection workloadPath = new ArrayList(3);
   protected Collection workloadError = new ArrayList(3);
   protected Collection workloadWaiting = new ArrayList(3);
   protected Collection workloadProcessed = new ArrayList(3);
   protected ISpiderReportable report;
   protected Done done;
   protected Parser mParser;
   String content = "";
   String meta = "";
   String titel = "";
   String kopjes = "";
   static private int count = 0;
   private int taskNumber;
public Spider(int DBcompanyid, int DBsiteid, URL DBbase, ISpiderReportable report)
     base = DBbase;
     siteid = DBsiteid;
     companyid = DBcompanyid;
     MaxPaginas = 20;
     this.report = report;
     count++;
     taskNumber = count;
     mParser = new Parser ();
     PrototypicalNodeFactory factory = new PrototypicalNodeFactory ();
     factory.registerTag (new LocalLinkTag ());
     factory.registerTag (new LocalMetaTag ());
     factory.registerTag (new LocalFrameTag ());
     factory.registerTag (new LocalTitleTag ());
     factory.registerTag (new LocalHeadingTag ());
     mParser.setNodeFactory (factory);
public void run()
      clear();
      report.koppelDB(siteid,companyid);
      addURL(base);
      begin();
public Collection getWorkloadPath()
    return workloadPath;
public Collection getWorkloadError()
    return workloadError;
public Collection getWorkloadWaiting()
    return workloadWaiting;
public Collection getWorkloadProcessed()
    return workloadProcessed;
public void clear()
    getWorkloadError().clear();
    getWorkloadWaiting().clear();
    getWorkloadProcessed().clear();
    getWorkloadPath().clear();
public void addURL(URL url)
    if ( getWorkloadWaiting().contains(url) )
      return;
    if ( getWorkloadError().contains(url) )
      return;
    if ( getWorkloadProcessed().contains(url) )
      return;
    if ( getWorkloadPath().contains(url.getPath()) )
      return;
     getWorkloadPath().add(url.getPath());
     log("PROCES: " + taskNumber + " Adding to workload: " + url );
     getWorkloadWaiting().add(url);
     MaxPaginas--;
   protected void processURL (URL Furl) throws ParserException
          NodeList Nlist;
         getWorkloadWaiting().remove(Furl);
         getWorkloadProcessed().add(Furl);
         String url = Furl.toString();
         StringExtractor se = new StringExtractor (url);
         try
            content = se.extractStrings ();
        catch (ParserException e)
                e.printStackTrace ();
        try
        mParser.setURL (url);
            try
               Nlist = new NodeList ();
                for (NodeIterator e = mParser.elements (); e.hasMoreNodes (); )
                    Nlist.add (e.nextNode ());
            catch (EncodingChangeException ece)
                mParser.reset ();
                Nlist = new NodeList ();
                for (NodeIterator e = mParser.elements (); e.hasMoreNodes (); )
                    Nlist.add (e.nextNode ());
        catch (ParserException pe)
           String message;
           message = pe.getMessage ();
           if ((null != message) && (message.endsWith ("does not contain text")))
                System.out.println("Is geen text bestand...");
            else
                throw pe;
        report.writeDB(siteid,(String)Furl.getPath(),content, titel, meta, kopjes);
        String content = "";
        String meta = "";
        String titel = "";
        String kopjes = "";
        log("Complete: " + url);
    class LocalLinkTag extends LinkTag
        public void doSemanticAction ()
            throws
                ParserException
            if(!isHTTPLikeLink())
                return;
            String link = getLink();
           int index = link.indexOf('#');
             if (index != -1)
                 link = link.substring(0, index);
            if(MaxPaginas>1)
               handleLink(base,link);
            else
                return;
    class LocalFrameTag extends FrameTag
        public void doSemanticAction ()
            throws
                ParserException
            String link = getFrameLocation ();
            if(MaxPaginas>1){
                handleLink(base,link);
   public class StringExtractor
     private String resource;
     public StringExtractor (String resource)
        this.resource = resource;
     public String extractStrings ()
        throws
           ParserException
        StringBean sb;
        sb = new StringBean ();
        sb.setLinks (false);
        sb.setURL (resource);
        return (sb.getStrings ());
    class LocalTitleTag extends TitleTag
        public void doSemanticAction ()
            throws
                ParserException
            titel = getTitle();
    class LocalHeadingTag extends HeadingTag
       public void doSemanticAction ()
            throws
                ParserException
            kopjes = kopjes + " " + toPlainTextString();
      class LocalMetaTag extends MetaTag
        public void doSemanticAction ()
            throws
                ParserException
            String metaNaam = null;
            metaNaam = getMetaTagName();
            if(metaNaam!=null)
                if(metaNaam.equals("keywords") || metaNaam.equals("description"))
                        meta = meta + " " + getMetaContent();
public void begin()
    while ( !getWorkloadWaiting().isEmpty()) {
       Object list[] = getWorkloadWaiting().toArray();
      for ( int i=0;(i<list.length);i++ )
      try{
         processURL((URL)list);
}catch(ParserException pe){
System.out.println("Parser error:"+pe);
MaxPaginas++;
protected void handleLink(URL base,String str)
try {
URL url = new URL(base,str);
if ( report.spiderFoundURL(base,url)){
addURL(url);
} catch ( MalformedURLException e ) {}
public void log(String entry)
System.out.println(entry );
It must have something to do with the inner classes and processURL since i replaced only this code Swing parser with htmlparser.
I dont expect anyone to exactly say this is wrong or that, but maybe some tools and suggestions how to solve would be very welcome.
thanks

The structure is like this:
public class test{
public static void main(String args[])
         test x = new test();
         x.execute();
public void execute()
     ThreadPool pool = new ThreadPool(10);
      for (int i = 0; i < size; i++ )
          pool.assign(new Spider(DBcompanyid, DBsiteid, base,this));
     pool.complete();
}

Lenovo B590 Memory

First of all, I hope this is the right section for the Lenovo B series laptops, particularly the Lenovo B590. If it's the wrong place I apologize.
Does anyone know what RAM is supported in the Lenovo B590? Specifically the 20208 model. I got one of these laptops through my school and it only has 2GB of RAM which simply isn't enough when you are used to a computer rocking 8GB of DDR3 RAM. Does anyone know what the supported RAM specs are for this model Lenovo? I tried to Google it, and I got to Crucials website where they have a set that is 2x4GB, CL11, 1.35v, and 204 pin, which I assumed would be the recommended specs to shoot for, but I wanted to be absolutely positive before I dumped money into some RAM kits.
Is Crucial the main RAM supplier for these laptops? Also would memory with a different CL work? I use this computer exclusively for school work, so the cheaper the better for this computer (long as it's of good quality). Does it have to be 1.35v RAM or would 1.5v RAM work as well?
I was searching Newegg and found Crucial 8GB (2 x 4GB) 204-Pin DDR3 SO-DIMM DDR3 1600 (PC3 12800) Laptop Memory Model CT2KIT51264BF160B, CL11, 1.35v for $67.99. Would this type of RAM be suppoprted with this laptop? Looks almost identical in terms of specs to the memory on Crucials website for $22 cheaper. There is even cheaper RAM, but it's 1.5v RAM, and I want to make sure I know what will positively work before I drop the money.
I'm a noob when it comes to laptop hardware. I've always dealt with desktops. This is the first laptop I've ever owned so I'm learning as I go when it comes to laptop hardware, so any information would be appreciated.
Thanks!

Hi Shashi,
Welcome to Lenovo Community Forums!
I’m glad to inform you that any RAM/Memory with the specifications provided in the image below will be compatible with the computer.
Spoiler (Highlight to read)
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Can't load drivers for KT4A-V with Sempron 2800

I have a kt4a-v board with Sempron 2800 chip
256mb geforce FX5500-TD256 TV DVI AGP card
also 512 Mb PC2700 DDR
Loading windows 98SE works fine until I try to load the drivers that come with the motherboard.
Windows will then not load in anything other than safe mode.

Hello,
Memory module, 1 of them could be faulty but I know windows 98se does not like a lot of memory.
This website says it is made worse with large memory video cards.
http://www.dewassoc.com/support/win98/win9x_512memory.htm
Try this then out the other stick in.
http://support.microsoft.com/?kbid=304943
If you swap the sticks around what happens?
Here is a program that can test the memory.
http://www.memtest.org/download/1.51/memtest86+-1.51.floppy.zip
Download, extract it to a folder, run the install.bat and it will make a memtest bootdisk.

5800 sync address book with Landrover phone kit

I have succesfully connected the 5800 via bluetooth with a Landrover Freelander 2 car kit. But I cannot get the address book to down load - it says downloding, but then the in car address book is empty. Does anyone know how to solve this?
Thanks

For the benefit of anyone else reading....I've found a partial solution.
Land Rover website (http://bluetooth.landrover.com/dial.aspx) says Nokia 5800 should be campatible with exception of call lists and automatic phonebook download - so the "copy from phone" won't work, but you should be able to select contacts on the phone and send them as business cards to the Freelander via bluetooth (you can "mark" more than one to send at once).
Unfortunately, I can't get this to work for contacts in my phone memory (though the website says it should work). You can get around it by copying your contacts to your SIM first, and then sending them as business cards.
A bits fiddly, but it does work. You can then delete all the SIM contacts - see the phone handbook for details.
Hope that helps someone!

300 GB hard drive IN an iBook?

I was just looking at the memory to go website and saw a section for hard drives for ibooks.
http://www.memorytogo.com/e-store/prod_details~pid~86186.htm
Am I wrong or is this an actual 300gb internal hard drive upgrade option for an ibook? If so, how could you get it installed? Apple store? How would this impact the applecare protection on the rest of the notebook.
Any advice would be great. I would love to have 300 gigs at 7200rpms IN my ibook for 150 bucks!
Nate

That is certainly a mistake. As Eddi says, there are no hard drives physically small enough to fit inside an iBook with more than 120GB of capacity. That must be a 3.5" hard drive meant for a desktop computer, but that online description is NOT very helpful!
-Doug

DKA790GX platinum problems

hi there, please bear with me as i am pretty new to building computers, i recently bought and installed a 25.g phenom, and a dka790gx platinum board.
i also have a radeon 3850 hd card installed. since doing this, formatting my hard drive and using a clean install of windows vista i have been plagued with programs crashing, one or two blue screens and other such instability. i only have 3 1 gig ram sticks installed, do i need to use pairs? i ran the windows memory checker as i play world of warcraft and when that crashes it said memory could not be wriiten, or read, on two diff occasions.
i would really appreciate some help on this. firefox seems to be a program that has a lot of problems, as does windows live messenger and yahoo messenger, these problems do see intermittent though.
regards, and hoping for help.

What works good on one board doesn't always work on another.
Take a look at the other user signatures on this and other forums and look for users with the same motherboard, see what memory they're using.
Don't mix and match memory, pick a brand and part number and stick with it. If you change brands, or part numbers within a brand, change ALL
of your memory to that brand/ part number.
If your running dual channel, buy matched pairs, They're matched at the factory to work together, and will have closer to identical specs than two sticks
you buy separately.
Check your memory manufacturer's website for compatibility with your motherboard (OCZ doesn't list your motherboard on their site, but it's a new board , so it might be worth a call).
Search for reviews of your motherboard or the memory your thinking about purchasing and see if any of the sites have used your motherboard and/or memory for a review.
If it's a popular motherboard, odds are somebody will be using it as a test bed, If your lucky, they used or reviewed the memory your interested in, on your board.
Hang out here for a bit and see if anyone is using or tried your motherboard/memory combination.

Spinning wheel but not switching on

when i switch on iMac I get white screen with Apple logo and spinning wheel but it doesn't go any further

Hi,
I'm going to write all of this in case it may be of use to someone else!!!
IT'S WORKING, hurray.
This is what I did. I used two Macs, a laptop, portable HD and memory stick, various websites and forums and all afternoon!
As I could boot up in Windows I downloaded a copy of Mac Drive (had to do this on a laptop/memory stick as my copy of Vista is 32 bit and so have no internet through Windows). Installed this on my Windows partition and after trying various ways of getting in and a few complaints from computer I managed to see my Mac HD (think I had to double click on it, right click wouldn't do it and got various warnings) and extract all of the important files (photos and music mainly). Put these on a portable HD that I have.
Then rebooted from OSX install DVD, erased Mac partition and reinstalled Mac OS.
Thanks baltwo for your suggestions, it all helped narrow things down.

MOVED: DKA790GX platinum problems

This topic has been moved to AMD64 ATI/SiS/VIA boards.
https://forum-en.msi.com/index.php?topic=124194.0

What works good on one board doesn't always work on another.
Take a look at the other user signatures on this and other forums and look for users with the same motherboard, see what memory they're using.
Don't mix and match memory, pick a brand and part number and stick with it. If you change brands, or part numbers within a brand, change ALL
of your memory to that brand/ part number.
If your running dual channel, buy matched pairs, They're matched at the factory to work together, and will have closer to identical specs than two sticks
you buy separately.
Check your memory manufacturer's website for compatibility with your motherboard (OCZ doesn't list your motherboard on their site, but it's a new board , so it might be worth a call).
Search for reviews of your motherboard or the memory your thinking about purchasing and see if any of the sites have used your motherboard and/or memory for a review.
If it's a popular motherboard, odds are somebody will be using it as a test bed, If your lucky, they used or reviewed the memory your interested in, on your board.
Hang out here for a bit and see if anyone is using or tried your motherboard/memory combination.

GX600 notebook ram upgrade

Hello everyone,
I 've had a GX600-009 for 1 year and half now, and I am very pleased with it. However I would like to upgrade the RAM from 2GB to 4GB (2x2GB modules).
On the notebook details, it is said the maximum amount of ram you can put is 2GB.
I would like to know if anyone succeeded to upgrade the GX600 to more than 2GB of ram ?
Has there been a BIOS update to add the > 2GB ram support ?
Thank you for your help

Which memory modules did you tried? Did you followed the instructions on memory vendor's website? For example, when you search for MSI GX600 on Kingston's website, you'll get selection of tested compatible modules for three variants:
http://tinyurl.com/cb34x8
http://tinyurl.com/c7ntxv
http://tinyurl.com/ct5ese
From those three, only one 4GB combo is KVR667D2S5K2/4G kit. This one should work fine as it was tested to work for GX600.
http://tinyurl.com/dnm5ep
However, BIOS update might be also helpful - since there is no real changelog included (why MSI did stopped using this?) nobody knows for real - but compatibility fixes are common even in silent updates. I would go for the latest one, IMO.

Is there any difference between DDR3 memory and LPDDR3 memory? As i brought my macbook air 2013 recently and i saw the specifications it is indicating DDR3, buy apple website stated LPDDR3. Anyone can advise on this?

Hi
Is there any difference between DDR3 memory and LPDDR3 memory? As i brought my macbook air 2013 recently and i saw the specifications in the system info that is indicating DDR3, but apple website stated LPDDR3. Anyone can advise on this?

Welcome to Apple Support Communities
Read > http://en.wikipedia.org/wiki/Mobile_DDR DDR is the RAM used in computers, and LPDDR is common in mobile computers

Norton Anti Virus says Firefox Memory is 108MB. What this means have you downloaded my documents or visited websites?

Sir,
Yesterday Norton Anti Virus message came as "Firefox Memory 108MB" What this means, is it you have downloaded any documents from my desktop or from my visited websites is not known.
So kindly clarify and clear my doubt.
With Regards,
pubba
03-03-2012.

Screenshots: https://support.mozilla.org/en-US/kb/how-do-i-create-screenshot-my-problem
Norton monitors activities on your system including the resources used by files/applications on your system. Below are links that explain the items and how to configure them. These are measurements taken by Norton only.
*About (Norton's) System Insight: https://www-secure.symantec.com/norton-support/jsp/help-solutions.jsp?lg=english&ct=united+states&product=home&version=1&pvid=f-home&docid=v23920532_NAV_Retail_BB_2012_en_us
*{Norton's) General Setting (''read section "Performance Monitoring"''): https://www-secure.symantec.com/norton-support/jsp/help-solutions.jsp?lg=english&ct=united+states&docid=v15978338_NIS_Retail_2012_en_us&product=home&version=1&pvid=f-home
*Configure Norton settings: https://www-secure.symantec.com/norton-support/jsp/help-solutions.jsp?docid=v1028331_NIS_Retail_2012_en_us&lg=english&ct=united%20states&product=home&version=1&pvid=f-home
*About (Norton's) Performance Alerting: https://www-secure.symantec.com/norton-support/jsp/help-solutions.jsp?docid=v36700885_NIS_Retail_2012_en_us&lg=english&ct=united%20states&product=home&version=1&pvid=f-home
*Configuring (Norton's) Performance Alerts: https://www-secure.symantec.com/norton-support/jsp/help-solutions.jsp?docid=v36700888_NIS_Retail_2012_en_us&lg=english&ct=united%20states&product=home&version=1&pvid=f-home
'''''Any other questions about Norton and/or Norton alerts should be posted on the Norton user forum''''': http://community.norton.com/t5/user/loginpage
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Memory to go website...

Similar Messages

Maybe you are looking for