Memory Upgrade for Lenovo 3000 Notebook N200 (Type 0769)

Hi I want upgrade my memory from 1Gb to 4Gb (x2 slices of 2Gb).
pc spec:-
s/w MS XP pro sp3.
Original mem
1off Hynix 1Gb 2Rx16 PC2-5300S-555-12 (Works fine)
1st mem pair tried
2off manufact? 2Gb PC2-5300 128X8 200 SODIMM
2nd mem pair tried
2off Hynix 2Gb PC2-5300 128X8 200 SODIMM
Ive tried two lots of memory from Mr Memory and both get stuck on the Lenovo boot screen. Ive tried all the combinations incl slots with same effect. Both pairs were not faulty as they tested ok at Mr Memory once returned.
Wondered if I need to upgrade the Bios or anythng else to run 2Gb or 4Gb of memory?
Anyone else seen this problem?
Any help would be most gratefully received!
Cheers

hi yan_c,
Welcome to the Lenovo Community.
Have you tried to check the timings of the 2x2GB RAM if they are identical to the original 1GB RAM? You can use CPU-Z to check the timings of the 1GB RAM inside of Windows. As for the 2x2GB RAM, the timings should be in the packaging material.
Sample timings:
Spoiler (Highlight to read)
Source: http://www.notebookcheck.net/Review-Lenovo-3000-N2​00-Notebook.9088.0.html
Source: http://www.notebookcheck.net/Review-Lenovo-3000-N2​00-Notebook.9088.0.html
It's possible that the Memory Reference Code under the BIOS can't initiate the RAM if it has different timings. Flashing the BIOS would be the second step in this scenario.
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • Memory upgrade for Lenovo 3000 V200 - only 2Gb seen :(

    I bought 2 Transcend DDR2 800 SO-DIMM modules 2Gb each to upgrade memory on Lenovo 3000 V200 notebook.
    When I installed them, BIOS (and Windows) sees only 2Gb instead of 4Gb (i use x64 OS so no prob with OS here).
    When I install one of new modules and original 1Gb that was in notebook initially - only 1Gb seen instead of 3.
    I already checked that all memory modules are OK, both memory slots (if used only one) are OK too.
    But when both slots used together only lowest volume memory module is seen.
    BIOS update to latest awailable (6th release, ...60WW) didn't help.
    In specification stated that this model support up to 4Gb memory but I can't force it to support even 3Gb, only 1 or 2.
    Is it possible to do something in this situation?

    Probably the Transcend memory is not compatible, it does happen.

  • Memory upgrade on Lenovo 3000 j100 (product number: 8254-E6G)

    First of all, sorry for my English (I'm trying to improve it)
    I run a Lenovo 3000 j100 Desktop with 1GB RAM with two modules of 512MB each one installed on the two slots that the mother board has.
    I want to upgrade that memory to 4GB, but I have some doubts about that upgrade that I need to solve before buying the new memory additions.
    I've read some commentaries about this topic and there are people who say that the maximum memory size for this models of Lenovo is 2GB RAM, I mean one module of 1GB on each slot.
    However, the manual says that these desktops can be upgraded to 4GB RAM.
    In consecuence, which is the maximum memory size supported by my Desktop's mother board ?
    Sorry for my English again, I hope someone could help me because I wrote this question to Lenovo support and this service answered that I had to read the manual, they didn't solve my question.
    Thank you for your attention.

    Many thanks for your answer, but the type of memory of my computer is not the same as yours.
    My Lenovo 3000 j100 memory sticks are not DDR2, they are DDR.
    They have a sticker with this text on: 
        NT512D64S88B0GY-5T
        512MB DDR-400MHz-CL3
        PC3200U-30331

  • Memory upgrade:. Lenovo 3000 N200 0769-B5G

    I just bought
    new memory for upgrade.
    My old was: 2 X 512MB. PC2 5300 DDR2 667
    The new: 2 X 2GB. PC2 5300 DDR2 667.
    When I installed the new memory the computer is turn on, i can enter to bios ( i see that it reconized 4gb)
    but i can't boot the computer after the bios. the system stuck.
    I can only boot the computer with 1 X 2GB , and 1 X 512MB (the old memory),
    and also the 2GB Sim must be in the upper slot, if not it will not boot.
    So now the system is running with 2.5GB...
    what can be the issue?
    btw: I upgraded the bios to new one. V 3.03
    Thanks,
    Eli.

    HE meant to say this software is usefull for testing whether the memory chips are still "good" for running (.i.e. were not damaged by static electricity while manually handled)
    if the test shows that they are not good, then buy new one
    if opposite, then something is wrong with your laptop (double check on ther laptop anyway)
    Message Edited by registoni on 02-26-2009 08:02 AM

  • Lenovo 3000 n200 Type: 0769 game graphics problem

    Hi,
    I have a Lenovo 3000 n200 Type 0769 laptop which served me well at university with my 3D modelling in SolidWorks for my projects. However, when I tried to run games on it, the games always crash, even on a very low setting graphics setting which is extremely frustrating. The only game I have managed to run successfully with no problems is Football Manager (providing I dont use the 3d game play as when I do, like all other games I have tried, it crashes.). What do I need to upgrade to successfully run games on my laptop and also, (if it is only a new graphics card that is required) where can I find out which cards are compatible with my laptop?
    Running games is the only problem I am finding with the laptop and any help anyone can give me will be very much appreciated as I see a few other people who have posted in the forum have had the same problem with no luck with help on here.
    Cheers.
    - Pete
    PS. The games I have tried running with no success include; The Sims 2, Lord Of The Rings - Battle For Middle Earth 1 & 2, Command & Conquer Generals, Command & Conquer 3 and Warhammer Dawn Of War

    I don't know about the desktops, but Lenovo laptops are the worst I have ever used. I have had mine nearly a year and the amount of problems I have had with it is rediculous, along with this problem, the hard drive has broken and needed to be replaced, the finger print scanner is broken and does not recognise the only finger prints that have been registered on the laptop, and now it has broken again and i cannot get passed the rescue and recovery screen. NO ONE should buy this laptop or any lenovo laptops like it, they are unbelievably unreliable!

  • Need a VGA driver for lenovo 3000 H100 5310-2AA.. pls need some help here..

    Hi,
    is anyone of u have the installer for the VGA driver ( for lenovo 3000 H100 5310-2AA) ??
    or if u know where to download it pls tell me..
    I tried download from the lenovo's official website but it didn't work, I dunno why?
    it says "the nvidia setup program couldn't located any driver that are compatible with your current hardware. Setup will now exit"
    I confuse now.. I didn't upgrade or change any hardware since I bought it..
    thx

    you seem to install Nvdia when you must have been using intel's drivers.
    check out this link once
    http://www-307.ibm.com/pc/support/site.wss/product.do?doccategoryind=121202&template=/productpage/la... 
    Cheers and regards,
    • » νιנαソѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • Re: Memory upgrade for a Satellite 1800-921 PIII 1.1GHz...

    I am trying to find out the memory upgrade for my Satellite 1800-921 PIII 1.1GHz... Part Number : PS183E-00HTT-EN .
    It currently has a Nanya 256MB SDR-133 Mhz-CL3 & I undestand it can be upgraded with an additional 256Mb card.
    The only problem is I cant seem to find one compatible! Any ideas what is require & where I could get it from?

    Hello
    The compatible module is PC100 256MB with part number PA3069U-1M25.

  • Pls i need help for audio driver for lenovo 3000 j series

    hello, can sombody help me to find driver for lenovo 3000 j series audio driver.
    i did format to my computer and reinstall windows XP and now i don't have audio, i already downloaded all drivers from lenovo website and nothing is working. pls pls help. thank's. 

    If you are using Windows Vista go to All Programs/Palm and click on the folder and select Hot Sync Manager and then try to sync with the USB cable. If you are using the Windows XP go to Start/Programs/Palm/Hot Sync Manager and then try to sync. If you don’t have the palm folder at all on your PC you have to install it. Here is the link http://kb.palm.com/wps/portal/kb/common/article/33219_en.html that version 4.2.1 will be working for your device Zire 72.

  • Drivers for Lenovo 3000 N500 4233-5FG notebook

    Hi everybody!
    yesterday I became my brandnew N500 4233-5FG notebook. Here are the specifications:
    http://www5.pc.ibm.com/europe/products.nsf/$wwwPartNumLookup/_NS75Fxx?open&OpenDocument&epi=w​eb_express
    A friend of mine and I tried to install Win XP, but most of the drivers from the lenovo support HP don´t work. We´ve  read  lots of threads in this forum and all over the internet, but nothing helped!
    Here is what we did till here:
    1.switch from sata to ide
    2.forcing the notebook to boot with the optical drive, because otherwise it showed no reaction on the Win Xp CD 
    3.installing Win XP
    4.installing the drivers from  http://www-307.ibm.com/pc/support/site.wss/product​.do?template=/product.do?template=%2Fproductpage%2​...
    5.Win XP "runs" but almost all the drivers are announcing conflicts and as consequence nothing works (sound, LAN, and so on)
    6.then we installed the net framework and tried the drivers described by the user voyager in this thread:
    http://forums.lenovo.com/lnv/board/message?board.i​d=N_Series_Lenovo_3000&thread.id=8077&view=by_date​...
    7.nothing worked
    8.then we installed Service Pack 3 for Win XP an tried again the drivers from the lenovo HP.
    9.there was no improvement, which means there are always the same problems as at the beginning...
    10. as it was 4 o clock in the morning and we had a very long day, we decided to go to sleep... ;.)) 
    Can anybody help me and/or has  anybody experience with exactly the same notebook than i have?? (n500 4233-5FG)
    It would be very helpfull to have some suggestions on how to do it right or perhaps anybody knows something about were to find the right drivers?!?
    Thank in advance and lots of greetings,
    Daniel 

    I reviewed the link provided for your Lenovo 3000 N500 [Model Name: 42335FG, Part Number: NS75Fxx]
    Link:
    http://www5.pc.ibm.com/europe/products.nsf/$wwwPar​tNumLookup/_NS75Fxx?open&OpenDocument&epi=web_expr​...
    At the bottom of the configuration table, under "SOFTWARE", it says "Supported operating systems" PC DOS 2000 (limited), Windows Vista Business, Windows Vista Home Basic, Windows Vista Home Premium.
    It doesn't appear that the 3000 N500 [Model Name: 42335FG, Part Number: NS75Fxx] is intended to support XP.
    What am I missing here?
    Thank you
    3000 C200 8922-2AU Laptop
    Windows XP Pro
    T5500(1.66GHz), 1.5GB RAM, 80GB 5400rpm HD, 15in 1024x768 LCD, Intel 950, CDRW/DVD, Intel 802.11abg wireless, Modem, 10/100 Ethernet, IEEE 1394, 6c Li-Ion batt.

  • Has anyone successfully upgraded a Lenovo 3000 N100 to Windows 7?

    I have a 3000 N100 with 2 GB of memory on Vista.  Do I need special drivers or firmware changes to successfully upgrade to Windows 7 (32 bit)?  I know I can't increase the memory and am getting a lot of paging with Vista.  Thanks for the help.

    You can see my 11/18/2009 post.
    The upgrade to windows 7 has been easy on both the Lenovo N100 Notebook (exception - soundMax audio drivers) an an E-Machine Desktop.
    I still have no Notebook  DVD audio - seems that there are no SoundMax Win 7 drivers and the Vista compatible option doesn't work.
    The Desktop has Realtek and Win 7 drivers are available so every thing now works OK.
    We did lose functionality for a 1996 game for which no patch will be made - it wants to control the graphics display and apparently can't use the Win 7 10yrs newer drivers.
    Our HP AIO Printer worked with the Win 7 included Drivers but I needed to download the Win 7 files to have the HP programs (Update, Scan, Fax, etc.,).
    The Desktop was done with the Upgrade option, the Notebook with the Custom one.

  • Memory Upgrade for T61

    Hi friends,
    I have a T61 7663-xxx system, with 1 GB PC2-5300 667 MHz RAM. My Front Side Bus is 800 MHz ( I think so!), Everest software reports my memory controller is dual channel capable, and ~ 85% physical utilization of RAM. I have a nVidia Quadro NVS 140M 128 MB graphics card, but Everest reports 512 MB ?
    I would like to upgrade my RAM, and buy some online.
    a) Should I buy a similar 2 GB PC2-5300 RAM for my system for performance boost, running Windows XP 32 bit? If so, should I buy Lenovo RAM only, for maintaining my 3 year warranty intact?
    Only ThinkPad and Lenovo memory will assume ThinkPad and Lenovo notebook systems limited warranty
    b) What are the other best alternatives for good quality, reliable laptop memory,  besides Lenovo?
    c) Would it be better if I am able to buy RAM which can match my FSB? Will this have any performance benefit? Do these similar FSB speed RAM exist?
    Kindly suggest top memory makers, if any.
    I could not find any Lenovo 800 MHz memory from their website.
    Kindly help me solve my memory upgrade problem.
    I am a mechanical engineering student, hence I don't have any idea about FSB and the like, so I request the learned members to cast light on this area.
    Info about reputed online sites in US, with fast delivery will be very much appreciated.
    Thanks in advance.
    Best Regards,
    Raiden
    TU Hamburg, Germany
    Solved!
    Go to Solution.

    Hmm.  As far as I know, the internal graphics card can't be upgraded.  There's some dock you can buy that lets you add a graphics card for use with an external monitor, but I don't know much about it.  The cpu is more likely to be upgradeable, but don't attempt unless you know a decent amount about hardware servicing.  Also, make sure the cpu will be supported by the motherboard!  Best not to buy one with a clockspeed higher than what Lenovo sold (core 2 duo at 2.6 ghz).
    Why do you want to upgrade so much?  I run 2.1ghz with discrete graphics and 2gb ram under Vista, and it runs beautifully.  If you have integrated graphics, then that might be a bit of a pain, but hey, you've got better battery life!
    Anyway, I'd look more into de-cluttering your computer to speed stuff up.  Remove anything you don't need, especially Lenovo tools that run in the background and you may not need.  Turn off search indexing (slower searches, but faster overall performance).  There are some nice guides online, if you google "vista tuneup."
    Good luck!  Enjoy your T61 as it is!  It's a lovely laptop

  • No boot after bios upgrade on lenovo 3000 k100

    I updated my Bios using the flash upgrade from the lenovo website and right after that my system would not boot into windows at all!!!!!!....I followed instructions from website to the "T" and now wont boot into windows at all....tried resetting the bios by removing the battery on it  what gives???....I am using Vist home ultimate and was up and running until this update....
    DAVE

    I also experienced a failure attempting to update the bios with the Flash download.  My current bios is 2SKG28 and I downloaded the   "2SJG33USA.EXE" (Flash from operating system version)
    Installing the package in Windows Vista
    ======================
    1.  Close all open applications.
    2.  Click 'Start' -> 'All Programs' -> 'Accesories'.
    3.  Right click 'Command Prompt', select 'Run as administrator'.
        If the User Access Control (UAC) dialog box pops up, select Allow.
    4.  Type "cd C:\LENOVOTOOLS\FLASH\2SJG33\" and press Enter
    5.  Type "FLASH.CMD" and press Enter.
    6.  Two windows will pop up, with the upper window showing the update process.***
    ***At this point I received the 'incorrect ROM ID' failure, and was able to exit.
    Thanks for the assist!
    Lenovo 3000 K100 5706-1330 Intel Desktop Computer - CPU C2Q Q6600 2.4GHz, 3GB DDR2, 500GB SATA, SATA 16XGSA-H60N DVDRW, Windows Vista Home Premium, System BD (IG33_AD1988_I82566) HH LX-317CT(W) Chassis (R), BFG GeForce 9600 GT 512MB, BFG GS-550W PSU

  • Memory Upgrade on DV7T-3000 (NQ339AV)

    Hello,
    I have a Pavilion DV7T-3000 with i7-820QM Processor. I am planning on a memory upgrade. Has any one tried upgrading it to 16GB RAM ? (2 x 8GB). As per specs it can only go up to 2x4 GB.
    Thank you for for any feed back.

    I believe you should try to PM a level 8 or higher expert here and see if they will access someone from HP.
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

  • CE Utility Diskette for Lenovo 3000 series ???

    Hello
    I'm searching for this Lenovo Tool ...
    Which was described in the Lenovo 3000 Hardware Maintenance Manual
    Can everybody help me ??
    Thanx
    Frankmen 

    frankmen, welcome to the forum,
    I wasn't aware that any Business Partners in Germany are allowed to provide warranty service on 3000 or IdeaPad systems, please correct me if I'm wrong on this; it would be interesting to know.
    Being a business partner you will be able to contact your Lenovo representative who will certainly be able to put you in touch with the person(s) to speak to about this.
    Also, if anyone were to post a link to the utility from these forums it would be immediately removed by moderators.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Service Videos for Lenovo 3000 Systems - features - component install / removal

    Here are some helpful video segments for removing and installing components in Lenovo 3000 systems
    Lenovo 3000 N100
    Lenovo 3000 N200
    Lenovo 3000 C100
    Lenovo 3000 C200
    Lenovo 3000 V100
    Lenovo 3000 Y300 / Y400
    Message Edited by Mark_Lenovo on 02-21-2008 03:10 PM
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

    The service videos for Y400 series can be used for your Y410.
    Edmund Tse
    V100 0763-68H :: R31 2656-7LH
    Member of #!SUITS. Visit my blog!

Maybe you are looking for

  • How do I get iTunes to read music from two drives?

    I recently bought an external hard drive for my laptop to transfer some of my music files that I don't use a lot. I have transfered these files but when I go to play them from iTunes it can't find them and I have to manually locate each song, after t

  • Tree Component within Accordion Component

    Hello all! I've done a navigation scheme that uses both the accordion and tree components. The data being gathered is from an XML file. The only problem i'm having is getting the tree components to display the data that they're being provided with. I

  • Bold in AppWorks  vs Pages

    We are attempting to convert our usage from Appleworks to Pages and have run into a problem. A document we converted has a font called Baker Signet in it. We could bold or italics to our heart's content. When we bring it into Pages we can only have p

  • What to do when the Macbook is hot that you cannot work with it?

    My four years old Mac book from the beginning was getting hot while in use. I decided that was due to the period of time it was switch on. However, I do not keep it on for more than four hours and I do also keep it still @ home, other than move it al

  • LAP to Autonomous upgradation

    I have Cisco AIR-LAP1131G-E-K9 but now I want to convert it to Autonomous. I am trying the method of IOS upgradation the way mention on the forum and cisco site but I am not able to do that. process_config_recovery: set IP address and config to defau