Memory vs. Processor upgrade? Processor upgrade requires OS 9?
I have a Power Mac G4 QS with a 733 MHz processor and 640 MB of RAM. I plan to use it mainly for video editing, and was thinking about upgrading the processor or RAM or perhaps both. My first question is, should I should upgrade just one (processor OR memory) or both?
My second question requires a bit of explaining. I've already installed all of the software I will be using before realizing that this computer didn't have a version of OS 9 installed (I'm running 10.3.8, I think; I'm actually not on that computer at the moment, so I can't check). I've read that in order to perform a processor upgrade, you have to run a firmware upgrade that only works in OS 9.2.2, so I was wondering, how add OS 9 on to the computer without messing up my OS and/or wiping out all of the software I've already installed?
(Yes, I'm a Mac newbie, at least as far as installation goes.)
Power Mac G4 Quicksilver 733 Mac OS X (10.3.8) 640 MB RAM, 40 GB HD
Hi,
CPU's:
This processor is available, it does NOT need a manufacturers Firmware installed. It is also a dual processor and will work very well for video processing. This is a bargain, very fast too.
http://www.yourmacstore.com/shop/shopexd.asp?id=548
This dual processor needs manufacturer's Firmware installed but does NOT need Mac OS 9.2 for the install. It starts the Mac from a Disk and installs the Firmware for it, simple - just follow directions.
http://eshop.macsales.com/item/Newer%20Technology/MAXG48D1700/
•••Only Sonnet upgrades still require you to boot into Mac OS 9.2.2 for the Firmware install.
Memory:
The prices are down right now, you can get a stick of 512MB RAM for $59, see this:
http://eshop.macsales.com/item/Other%20World%20Computing/133SD512328/
The above are some places to look at CPU's and memory. The first CPU and two sticks of 512MB RAM for a total of less than $600 will make your QS quite fast.
That seems a good deal to me, if you like the computer you currently have.
The new computer is always an option.
Regards,
Dave
no comp...
Similar Messages
-
Please help upgrade processor S10
I have a lenovo s10 . can i upgrade processor from atom N270 to intel dual core 2GHZ ????
it is not danger may net book ????Hi,
impossible mission...
hardsoldered cpu... size...power consumption..
thats a netbook not a notebook...
most "books" are not designed to upgrade ... its not a pc, where you can easy change parts (also limited intel/amd/via not compatible) (heatspreader,powerful psu.)...
many thing depends on each other...heat consumption (cooling system) power consumption...
chipset...grafics...
so the only things you can upgrade , and thats easy in case of S10 ... memory up to 2GB, harddrive (or SSD) up to 500GB (or more but bigger harddrive didnt see now) ... and with a little more experience faster wireless card (n) or bluetooth modul...
sincerely KalvinKlein
Message Edited by KalvinKlein on 06-24-2009 10:57 AM
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1 -
Time to upgrade processor?
Upgraded HD to 250 GB, added DVD read write now I need to upgrade processor. Help. Have had G4 since late 2001. Absolutly no problems. Have kept software updated also. Would like to upgrade to new OS Leopard but processor speed only 800mhz, need more. Any suggestions would be appreciated. Budget allows about $400 dollars. Also with a processor upgrade can I increase ram? Right now Im maxed at 1.5g
Thanks JoeyHi-
Welcome to Discussions!
For $400 you can bump the speed of your processor a lot, and give yourself a "new" machine:
http://eshop.macsales.com/MyOWC/Upgrades.cfm?model=153&type=Processor&TI=1526&sh oupgrds=Show+Upgrades
The dual 1.6ghz processor upgrades would really bring your machine to life.
If you like games, and other graphic intensive applications, a 7455 based processor upgrade might serve you even better. They max out at about 1.4ghz, but have an L3 cache that really helps the processors work "faster":
http://store.fastmac.com/productinfo.php?productsid=198
http://www.gigadesigns.com/index.asp?PageAction=VIEWPROD&ProdID=37
Even without moving to Leopard, the speed increase will improve your experience with Tiger, and all the applications that you have.
I, like Tom, am running a processor upgraded G4, and went ahead and ordered Leopard. Power of positive thinking.....
Will be posting results as soon as I receive my copy! -
I have a 2008 vintage iMac with 2.8GHz processor and recently upgraded to OS X 10.9.5. Soon after theupgrade the mail system started switching the senders address to another address, but same user name. How do you fix this?
Thanks for the reply,. I went to the site provided and executed the directions but this did not solve the issue.
Even more details:
If I send a message to the Jane Doe address from another account on this machine (all my family uses the same email services provider and each have accounts set up on this machine), when you open it, it shows Jane Doe then the <applejax.xx> address AND the picture associated with the Apple Jax account.
So the problem shows up when the message is sent to this account from this machine, AND when it is sent from this machine from this account. No other accounts on the machine are effected.
I have sent and received email messages from the mail service provider's website, and everything is fine. -
G50-45 Processor and RAM upgrade?
Hello, currently I own a Lenovo G50-45 Laptop with Windows 8.1 and I am looking to see if I can upgrade the upgrade the Processor and RAM. Currently in the system is the AMD A8 6410 APU with AMD Radeon R5 Graphics and 6 GB of RAM and I'd like to upgrade the RAM to 8 GB and the Processor to something with much higher performance. Thank you!
Hi Trident1,
Welcome to Lenovo Community Forums!
The Processor this unit is Embedded to the motherboard and can't be replaced or upgraded.
Your Processor AMD A8 6410 APU is part of the Beema Architecture which supports 16GB RAM
YES you can upgrade up to 8GB DDR3L 1600
This system can take up to 16GB MAX by using 2x 8GB Module
Regards
Solid Cruver
-
Dv6-6c40us upgrade processor?
I have an HP DV6-6c40us and would like to upgrade my current processor to a better one. I am inquiring if this is even possible. I have consulted the manual and it appears that the processor can be upgraded.
Current specs:
Win 7 ultimate
6GB RAM
AMD A8 3520M
This question was solved.
View Solution.The price of SSDs has come down and continues to decline but if you need a 500 gig size it is going to cost at least 50 cents a gig. Maybe consider a hybrid drive; you can get a 500 gig for $75, or about third of what an SSD would cost:
http://www.newegg.com/Product/Product.aspx?Item=N82E16822178339
No A10 processor is supported. A8-3550MX is the fastest one listed in the Manual, which you probably need:
Manual
Sometimes CPUs not listed in the manual will work but it is a bit of a long shot. CPU upgrades are not officially supported and if you ask HP directly it should not be done.
If this is "the Answer" please click "Accept as Solution" to help others find it. -
Memory and No. of Processor calculation for Oracle EBS R11 and R12
Can some one please tell me …. How to calculate required Memory and No. of Processors for Oracle EBS R11 and R12.
For example we have 50 Concurrent users and 100 named (i.e. the users which are doing only Data entry.), so how to How to calculate required Memory and No. of Processors
Please guide me on the same.
Thanks,Please refer to the following links, it may be helpful:
Oracle Applications Benchmark White Papers
http://www.oracle.com/apps_benchmark/html/white-papers-e-business.html
Oracle Applications Standard Benchmark White Papers
http://www.oracle.com/apps_benchmark/html/white-papers.html
Hardware requirements for Oracle APPS
Hardware requirements for Oracle APPS -
i have a late 2008 macbook running good now at 2012 when will i need to upgrade recently upgrade to 4g memory and 2ghrz
Nobody can tell you when you'll need to upgrade, as it depends on the software you're running, the operating system that software requires, and the state of your hardware. You've added memory, which you needed to do with Mountain Lion, and you could replace the hard drive with an SSD for better disk performance.
-
I have an ipod touch but i don't have enough memory and 0I get an upgrade soon for my phone and i want the iphone but the thing is, can i have an ipod touch and an iphone on the same itunes account like can i use my money on my ipod account for my iphone
Your iPhone and iPod can share the same iTunes account. Apps can be freely shared and used by one or both devices. You can't use money in your iTunes account to pay for your phone, but purchased apps can be used by both the iPod and iPhone.
-
Why these features aren't avaiable on iphone yet ?Internal radio, Bluetooth(work with any mobile), Memory slot, Better internal memory(>512 MB), Fast processor, 21Mbps HSDPA, Big display (feel the real experience of IOS) Will the next iphone resolve these issues ?
For the same reason my car hasn't got in-dash satnav, leather upholstery or a six litre engine. Because that's how the manufacturer chose to make it. If you are unhappy with the specs, don't buy one.
There is no information regarding any new iPhone. -
My upgrade to CS6 requires me to uninstall the beta or trial version; how do I do that?
My upgrade to CS6 requires me to uninstall the beta or trial version; how do I do that?
Use the Uninstallers provided to remove the software. Do *NOT* delete the files.
-
I have a MacBook Pro 17" Intel Core i7, 2.66 GHz running Mavericks 10.9.3. It currently has 2x4GB DDR3 1067MHz 240 pin memory cards. Can I upgrade to 2x8GB DDR3 1067MHz 240 pin cards?
These are the specs of my computer.
BANK 0/DIMM0:
Size: 4 GB
Type: DDR3
Speed: 1067 MHz
Status: OK
Manufacturer: 0x802C
Part Number: 0x31364A53463235363634485A2D3147314631
Serial Number: 0xFFFFFFFF
BANK 1/DIMM0:
Size: 4 GB
Type: DDR3
Speed: 1067 MHz
Status: OK
Manufacturer: 0x802C
Part Number: 0x31364A53463235363634485A2D3147314631
Serial Number: 0xFFFFFFFF
I have been on the net and found the following……
8GB (1X8GB) SODIMM Memory RAM 4 Apple MacBook Pro 17-inch Intel Core i7 2.2GHz (MC725LL/A
Price:
$85.00 & FREE Shipping
Only 4 left in stock.
Ships from and sold by Computer Memory Solutions.
204PIN SODIMM
DDR3 SDRAM
DDR3-PC10600
1PC SINGLE MODULE
16 CHIPS LOW DENSITYMaximum Memory
16 GB (Actual) 8 GB (Apple)
Memory Slots
2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM
Yes. -
Should I buy the imac with expandable memory slot for future os upgrade size?
Should I buy the imac with expandable 8gb memory slot for future os upgrade size?
I Always try to have a little more RAM on my computers that I think I'll need when I purchase them. Either have more ram installed when you order the iMac or purchase one with open slots for upgrading.
I Purchase my iMac 5K with only 8 GB RAM but it had two open slots. As soon as I received the iMac I purchased two 8 GB modules form Other World Computeing. That brought my RAM to 24 GB. I run multiple applications and the iMac runs smoothly. -
Oracle Upgrade -- Pre-Upgrade 10.2.0.4 to 11.2.0.1
Hello,
I want to do an Oracle Upgrade to version 11.2g!
At this point I did some things (in Windows Server 2003 X64):
1-) Install Oracle 10.2.0.1 (DVD Media);
2-) Installation of Oracle patchset 10.2.0.4 (note 871735);
3-) Installation of interim / last generics patch (note 1137346);
4-) Installation of SAP ECC 6.0 SR3 by SAPInst
5-) After SAP installation I did all the corrections in Oracle parameters as it mentioned in note 830576.
As you see above, all the SAP system was well installed!
But now I want to do the Oracle Upgrade process to the last version, Oracle DB 11.2g (11.2.0.1)... and so I´m following the Upgrade guide "Upgrade to Oracle Database 11g Release 2 (11.2) Windows.pdf" with some SAP notes for Upgrade process.
So I´m at this point in planning chapter where is recommended to check so things in actual database, one of this checks are running some SQL-scripts to perform an Oracle database upgrade with DBUA to release 11.2 (as mentioned in note 1431793 - Oracle 11.2.0: Upgrade Scripts)
I ran two Pre-Scripts, the @pre_upgrade_status.sql and @pre_upgrade_tasks.sql but both outputs showed some warnings and they are worrying me... so what I ask to you is some kind of help in analyse of them and tell me if this issues are relevant for the upgrading process and if so, what you recommend me to do to correct their!
Next I will post here this two log scripts... they are long!!!PRE_UPGRADE_TASKS.log:
SQL> @pre_upgrade_tasks.sql
PRE-UPGRADE Tasks: === START ===
2010-08-05 18:24:13
Recompiling invalid objects
This reduces the number of invalid objects as much as possible.
COMP_TIMESTAMP UTLRP_BGN 2010-08-05 18:24:13
DOC> The following PL/SQL block invokes UTL_RECOMP to recompile invalid
DOC> objects in the database. Recompilation time is proportional to the
DOC> number of invalid objects in the database, so this command may take
DOC> a long time to execute on a database with a large number of invalid
DOC> objects.
DOC>
DOC> Use the following queries to track recompilation progress:
DOC>
DOC> 1. Query returning the number of invalid objects remaining. This
DOC> number should decrease with time.
DOC> SELECT COUNT(*) FROM obj$ WHERE status IN (4, 5, 6);
DOC>
DOC> 2. Query returning the number of objects compiled so far. This number
DOC> should increase with time.
DOC> SELECT COUNT(*) FROM UTL_RECOMP_COMPILED;
DOC>
DOC> This script automatically chooses serial or parallel recompilation
DOC> based on the number of CPUs available (parameter cpu_count) multiplied
DOC> by the number of threads per CPU (parameter parallel_threads_per_cpu).
DOC> On RAC, this number is added across all RAC nodes.
DOC>
DOC> UTL_RECOMP uses DBMS_SCHEDULER to create jobs for parallel
DOC> recompilation. Jobs are created without instance affinity so that they
DOC> can migrate across RAC nodes. Use the following queries to verify
DOC> whether UTL_RECOMP jobs are being created and run correctly:
DOC>
DOC> 1. Query showing jobs created by UTL_RECOMP
DOC> SELECT job_name FROM dba_scheduler_jobs
DOC> WHERE job_name like 'UTL_RECOMP_SLAVE_%';
DOC>
DOC> 2. Query showing UTL_RECOMP jobs that are running
DOC> SELECT job_name FROM dba_scheduler_running_jobs
DOC> WHERE job_name like 'UTL_RECOMP_SLAVE_%';
DOC>#
COMP_TIMESTAMP UTLRP_END 2010-08-05 18:24:15
DOC> The following query reports the number of objects that have compiled
DOC> with errors (objects that compile with errors have status set to 3 in
DOC> obj$). If the number is higher than expected, please examine the error
DOC> messages reported with each object (using SHOW ERRORS) to see if they
DOC> point to system misconfiguration or resource constraints that must be
DOC> fixed before attempting to recompile these objects.
DOC>#
0
DOC> The following query reports the number of errors caught during
DOC> recompilation. If this number is non-zero, please query the error
DOC> messages in the table UTL_RECOMP_ERRORS to see if any of these errors
DOC> are due to misconfiguration or resource constraints that must be
DOC> fixed before objects can compile successfully.
DOC>#
0
Purging Recyclebin
This reduces the time needed for upgrading the database.
Truncating SYS.AUD$
This reduces the time needed for upgrading the database.
Gathering Oracle Dictionary Statistics
This reduces the time needed for upgrading the database.
Running Pre-Upgrade-Information Tool utlu112i.sql
This is a mandatory task for manual database upgrades.
This tool is also run in pre_upgrade_status.sql.
Oracle Database 11.2 Pre-Upgrade Information Tool 08-05-2010 18:24:45
Script Version: 11.2.0.1.0 Build: 003
Database:
--> name: PRD
--> version: 10.2.0.4.0
--> compatible: 10.2.0
--> blocksize: 8192
--> platform: Microsoft Windows x86 64-bit
--> timezone file: V4
Tablespaces: [make adjustments in the current environment]
--> SYSTEM tablespace is adequate for the upgrade.
.... minimum required size: 905 MB
--> PSAPUNDO tablespace is adequate for the upgrade.
.... minimum required size: 84 MB
--> SYSAUX tablespace is adequate for the upgrade.
.... minimum required size: 210 MB
--> PSAPTEMP tablespace is adequate for the upgrade.
.... minimum required size: 61 MB
Flashback: OFF
Update Parameters: [Update Oracle Database 11.2 init.ora or spfile]
Note: Pre-upgrade tool was run on a lower version 64-bit database.
--> If Target Oracle is 32-Bit, refer here for Update Parameters:
-- No update parameter changes are required.
--> If Target Oracle is 64-Bit, refer here for Update Parameters:
WARNING: --> "shared_pool_size" needs to be increased to at least 472 MB
Renamed Parameters: [Update Oracle Database 11.2 init.ora or spfile]
-- No renamed parameters found. No changes are required.
Obsolete/Deprecated Parameters: [Update Oracle Database 11.2 init.ora or spfile]
--> remote_os_authent 11.1 DEPRECATED
--> background_dump_dest 11.1 DEPRECATED replaced by "diagnostic_dest"
--> user_dump_dest 11.1 DEPRECATED replaced by "diagnostic_dest"
Components: [The following database components will be upgraded or installed]
--> Oracle Catalog Views [upgrade] VALID
--> Oracle Packages and Types [upgrade] VALID
Miscellaneous Warnings
WARNING: --> Database is using a timezone file older than version 11.
.... After the release migration, it is recommended that DBMS_DST package
.... be used to upgrade the 10.2.0.4.0 database timezone version
.... to the latest version which comes with the new release.
Recommendations
Oracle recommends gathering dictionary statistics prior to
upgrading the database.
To gather dictionary statistics execute the following command
while connected as SYSDBA:
EXECUTE dbms_stats.gather_dictionary_stats;
Oracle recommends removing all hidden parameters prior to upgrading.
To view existing hidden parameters execute the following command
while connected AS SYSDBA:
SELECT name,description from SYS.V$PARAMETER WHERE name
LIKE '\_%' ESCAPE '\'
Changes will need to be made in the init.ora or spfile.
Oracle recommends reviewing any defined events prior to upgrading.
To view existing non-default events execute the following commands
while connected AS SYSDBA:
Events:
SELECT (translate(value,chr(13)||chr(10),' ')) FROM sys.v$parameter2
WHERE UPPER(name) ='EVENT' AND isdefault='FALSE'
Trace Events:
SELECT (translate(value,chr(13)||chr(10),' ')) from sys.v$parameter2
WHERE UPPER(name) = '_TRACE_EVENTS' AND isdefault='FALSE'
Changes will need to be made in the init.ora or spfile.
PRE-UPGRADE Tasks: === FINISHED ===
SQL> spool off -
Trying to open old iPhoto library on osx 10.9.5 with iPhoto 9.5.1. iPhoto says I must upgrade but upgrade eventually hangs. Tried to rebuild/repair database but it always says you have to upgrade database first and eventually hangs
What version was the old library made with?
What is the exact message? when it hangs does it crash or do you have to force quit?
LN -
Tried to use Iphoto and was told I needed upgrade. Try to install upgrade . Upgrade should take an hour if photo library is large. It's now close to three hours and still upgrading. Can't use Iphoto and don't want to stop if still upgrading...3hours??
You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
Once you are using the "Firefox" button ...
Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface
Maybe you are looking for
-
Blue screen iphone 5S ...
Hello , i have Iphone 5S i got it now , when i press the on button it go to screen that want me to plug the iphone to itunes , when im doing this i got only one opion is to do Restore , when i try to do Restore the iphone go to loading screen and aft
-
How do I transfer data from an external drive?
I have a mac mini and i want to transfer some, but not all data from it to my new macbook air. The person at the Apple Store told me i could use my external drive to do this by connecting it to my macbook air. I'm a bit confused on how to get this do
-
Converting xmltype to document/node
I am trying to take XMLType and create a DOMDocument or DOMNode. How can this be done. Thank you, Jim
-
Printing black everything is grey
What happened? HP officejet always printed black but now everything is a grey. Checked ink levels and cleaned print head but can't get black. Is there a known problem with printing text using OS 10.9? thanks, jim
-
IPhoto Book w/ scanned pictures?
Has anyone scanned pictures to iPhoto and then made a book? I was thinking of doing it for a gift but I'm not sure of the picture quality to create a book. I have been reading up on all of the discussions to find out more. What I have been reading is