Menu and Bookmark toolbars are missing upon restart of Firefox, although they are recoverable by left clicking on remaining toolbar. V31 and Windows 7.
As question states, the menu toolbar and bookmark toolbars are missing upon restart.
Both are fully recoverable as customized, but then disappear again upon restart.
I deleted the localstore.rdf.
But, I usually run Norton's Utilities 2012 "clean disk" upon closing down computer. The problem is something Norton is doing.
Firefox is storing my configuration/profile related to showing the two toolbars in some fashion (perhaps as a temp file), that Norton is erasing it.
Norton isn't deleting the customization/uniqueness of the toolbars.
Just that they don't show upon restarting.
There is probably a way for Firefox to store this "permanently".
Thanks for the help so far. The fix may not be something Firefox can do.
Similar Messages
-
I just updated the imovie app and all the clips from the event library are now missing, although they seem to be on the external hard drive...I am a new mac user, so please help...thanks...
I just updated the imovie app and all the clips from the event library are now missing, although they seem to be on the external hard drive...I am a new mac user, so please help...thanks...
-
New toolbar always disappears upon restart of Firefox
I add a new toolbar (right click on toolbars, then "customize"), give it a name, and put a few buttons on it.
The new toolbar is visible and working, and can be seen for instance in the View/Toolbars pop-up menu.
However when I exit firefox and start it again - after this, the new toolbar is gone. Even in View/Toolbars it is not listed anymore, i.e. it is not a problem of being unselected, but it is completely gone.You can Start Firefox using Different Profiles to see the changes among them.
Profile Manager
* https://support.mozilla.com/en-US/kb/Managing-profiles#w_starting-the-profile-manager
To help other users find solutions, please return to this Thread and '''Sign-in''' to the forum with your Username and Password:
click on '''"Solved It"''' next to the reply ABOVE that '''BEST''' solved your question
'''DO NOT click "Solved It" next to this reply -
Question
My iGoogle homepage is not showing any gadgets but they are there in IE. If I restart with AddOns disabled they are shown. I have disabled all AddOns separately and it has made no difference.Any ideas?I found that the culprit was Adblockplus. To solve it : ABP>drop down menu>Report issue on this page>click bullet blocking too much and follow steps.
-
Upon upgrading to Yosemite, the Pages and Numbers apps will not open (although they are the latest versions) and Keynote will not upgrade; how do I go about getting the apps to open? Is this a common issue?
Hi Madhattanite,
Welcome to the Support Communities! When did you purchase your Mac? The first thing I would suggest is to review the information in the resource below for the Up-To-Date Program for Pages, Numbers, and Keynote.
Once Yosemite is installed, you should have the option to Accept the Pages, Numbers and Keynote apps in the Mac App Store Purchases pane.
Apple - Up-to-Date Program for Pages, Numbers, and Keynote
I hope this helps ...
- Judy -
I have an iMac, 2015 model. operating on OS X 10.10.2 and whenever I click on just about everything in safari it opens a new tab with an ad on it. sometimes the ads are mackeeper or video hosting sites but they are just so annoying.
There is no need to download anything to solve this problem. You may have installed a variant of the "VSearch" ad-injection malware. Follow Apple Support's instructions to remove it.
If you have trouble following those instructions, see below.
Malware is always changing to get around the defenses against it. This procedure works as of now, as far as I know. It may not work in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
/Library/LaunchDaemons
In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
com.something.daemon.plist
and
com.something.helper.plist
Here something is a variable string of characters, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes it's a meaningless string such as "e8dec5ae7fc75c28" rather than a word. Sometimes the string is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
/Library/LaunchAgents
In this folder, there may be a file named
com.something.agent.plist
where the string something is the same as before.
If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
Open this folder:
/Library/Application Support
If it has a subfolder named just
something
where something is the same string you saw before, drag that subfolder to the Trash and close the window.
Don't delete the "Application Support" folder or anything else inside it.
Finally, in this folder:
/System/Library/Frameworks
there may an item named exactly
v.framework
It's actually a folder, though it has a different icon than usual. This item always has the above name; it doesn't vary. Drag it to the Trash and close the window.
Don't delete the "Frameworks" folder or anything else inside it.
If you didn't find the files or you're not sure about the identification, post what you found.
If in doubt, or if you have no backups, change nothing at all.
The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
Photoshop Elements 12
Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience.
Error Code: c0000005
Address: 75e32f71
I clicked on the OK button and the downloader closed.
I did a search on this error code (c0000005) and there seems to be a workaround but no solutions, why is this? I ask that because this problem seems to be years and years old, going back to at least 2005 (do the math that is 10 years).
I don't even have the Camera hooked up and I get this error on download. I redownloaded everything and reinstalled. I allso saw the AVI issues reported with this proble so i updated Quicktime though without the camera being hooked up when I get this error I didn't expect that to work. I tried support and they wouldn't help because I bought it in March this year. Pretty frustrating as I have re-purchased Elements about every 2 years. I think I might need a new CODEC? I had this problem on an Earlier version And I seem to remember that being the Fix but this may be something completely differentI finally found that it was missing a picture so the Catalog was "corrupted". I just deleted the picture and it started working.
I hate Adobe and their total lack of support - thanks for nothing Adobe . Also get this - they offered me to upgrade to 13.0 ( My 12.0 is only 6 months old but they still don't support it on errors. Only install errors!
I have upgrade and repurchase this product 4 times now. I will find something else next time! -
what do you do when your phone numbers no longer have the contact persons name just a number. Also names are missing from the address book where contacts are.
I, too, love everything about my phone. The other day I tried to crash my Z10 by running multiple apps and having videos running in the background. Do you think my Z10 showed any signs of slowing down? Nothing doing! It ran as smooth as silk. I'm very impressed.
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated. -
Nearly every time I buy a VPP app and download the spreadsheet there are multiple redemption codes that say that they are invalid! HOW can a code I am getting directly from apple be invalid!!!!!!!! Seems like your system has A LOT of flaws.
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
I have a 2008 Macbook and have had a new ram module fitted and now i have no photos in I photo but they are there on the hard drive on mackintosh ,photos how do I get them into i photo as they were.
Frustrated
Thanks Andrewchanging the ram has nothing to do with the photos missing. Did you install the ram or someone else?
-
4 voice memos in iTunes backup from iPhone had ! marks and would not play so I deleted them and although they are still on the iPhone, they will not sync back to iTunes from iPhone.
You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.
-
I have an old version, 10.5. A few days ago, my Inbox stopped showing new messages received, although they are coming in and show under Messages on Server. How can I get the messages on the server to go to my Inbox so I can access them?
Make sure Mail is selected in System Preferences > iCloud
-
Every time I try to use apple ID for face time I got an error message "the username or password was incorrect" although they are right and I use them in App Store and I cloud even after resetting my password, the problem happens also with iMessage . Please help
For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa -
When I view photos on my devices some are not oriented correctly. I used Picassa to turn all photos upright and then copied those photos into the upload file but they are still not corrected when viewed on my devices (ipads)
Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
It sounds like you are using two methods to upload to Facebook:
1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
2. Exporting pics and uploading to Facebook from the browser.
I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
Your problem is not with Aperture, it is using Facebook for showing your work.
If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
If you insist to use Facebook as your way to share your work, then your workflow should be this:
1. Right click images you want to share.
2. Select Export version.
3. Export as 100% size and ensure the export settings are set at 100% quality.
4. Upload this pic into Facebook.
This will get you the best image size and resolution on Facebook.
See how you go. -
How can I attach several images to my Outlook Mac 2011 email message and have all of the images reduced in size while they are being sent out. Thank you
https://discussions.apple.com/message/11994130#11994130
Maybe you are looking for
-
Movies taking long time to start playing!
I like watching movies in Front Row but I have a problem, Whenever I try watching a full length movie it takes really long time to start playing. The screen is black for like 2-3min and nothing responds (Pressing ESC, or pressing menu etc...) after t
-
Sharpening in ACR has stopped working
I always open files as smart objects. When I sharpen a photo in ACR and open in Photoshop the sharpening doesn't appear; if I reopen in ACR, the changes I have made to radius are there, but the stregnth is zero. I have tried this on numerous photos,
-
Hi, I am using Eclipse to create a GUI application. My problem is this... When I run it in Eclipse it finds the images just fine and they show up perfectly... But when I export to a JAR file, the image files either are distorted or don't show up at a
-
My home computer system and work laptop shared an iTunes account, the home system crashed and took 125 or so songs with it that weren't on the work machine...work machine is now my home system but how do I retrieve those 125 songs? Calvin
-
Abandoned Call Rings on Agent Phone
Hello, I have a strange situation reported by a supervisor that, abandoned call keep rings on agent phones and when one of the agents answers the call she hears busy tone. To reproduce this issue, we made some test calls and hung up the call just bef