Menu Bar for Struts application

Hi All,
We are developing the Struts based Web Application using Hibernate and for this we need the Menu Bar for all the pages in the application.But we are unable to write the code for the menu bar using java classes.
If possible please send the code for the issue.
Thanking you.
Ram

tsith wrote:
georgemc wrote:
ramachandrarao_bandaru009 wrote:
We are developing the Struts based Web Application using Hibernate and for this we need the Menu Bar for all the pages in the application.But we are unable to write the code for the menu bar using java classes.Then you probably shouldn't have applied for a job that required Struts experience
Right, I'm off to post in some Neurosurgery forum, see how far I can blag my way in that profession:
>
I am attempting to remove a cerebral tumour but I don't know one end of a gamma knife from the other. If anyone knows how to do this please detail the exact steps in laymans terms below
>1) open up head
2) locate tumor (note correct spelling ;-)
3) remove tumor - be careful not to remove good stuff
4) close head
5) ???
6) profitYou spelt tumour wrong :p

Similar Messages

Menu bars for all applications are unusable

I have a new MacBook that was running Tiger when I opened up the box. I noticed that sometimes the Finder menu bar failed to respond when the cursor was passed over it or any item in it was clicked on (normally I'd expect to see the menu items drop down). I updated to OS to Leopard but although the menus worked for a bit, now they're acting up again. Oddly, the items to the right of the bar (Airport, Bluetooth, etc.) still work.
I looked through the threads and one of them suggested using the Disk Utility to repair permissions and zapping the PRAM, which I did. The logging from the repair didn't give up much -- just the following for a bunch of languages:
ACL found but not expected on "System/Library/User Template/English.lproj/Desktop".
Anyone think of anything that might be causing this? Maybe a software conflict with something I migrated over from the previous iBook?

Steps taken:
(1) slaved the iBook to the MacBook and migrated the configuration from the old to the new notebook. Both the iBook and the MacBook were at that time running Tiger -- the iBook has a 30GB stock hard drive in it and other than Office X and some shareware was relatively clean. The migration had one hiccup - I was using an olde version of iPhoto and when I opened it I was prompted to update the thumbnails in my picture library. This essentially froze the application when the progress bar was about a quarter done. In the end I fixed that.
When I noticed the problem with the menu bars (which by the way appear to be somewhat translucent), I tried rebooting a couple of times. At this point, the problem was random and appeared only to affect the Finder Menu bar. So a reboot had the effect of seeming like it was fixing it. When it didn't go away, I was looking arounf and hit About This Mac and discovered Leopard was uninstalled. I opened the software box and found the install disk, so I ran it. Again, the problem appeared to go away.
I didn't use the MacBook for about a week, maybe ten days, and thenlast night I noticed that the problem affected all menu bars regardless of application.Tried rebooting. No go. Tried reparing permissions - no problems found. Zapped he PRAM three or four times. No workee.
That's where I'm at now.
I have Disk Warrior and Drive Genius, but I haven't tried them yet because (a) I thought this miht be a simple issue resolvasble on the threads, and (b) I bought them when I was running 10.3 on G3s and G4s respectively, and wasn't sure they were Leopard or Intel compatible.

Hello i need help for adobe creative cloud...when i launch application adobe cc 2014 for photoshop or illustrator.....the apps launch and i can see the workspace and menu bar for a while and suddenly this application close automatic

hello i need help for adobe creative cloud...when i launch application adobe cc 2014 for photoshop or illustrator.....the apps launch and i can see the workspace and menu bar for a while and suddenly this application close automatic

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

Controlling Menu Bars of Windows Applications like IE and Editor with LabVIEW 6

Hi everybody !
I'm trying to develop a vi (LabVIEW 6) which controls menu bars in
Windows Applications (IE, Editor, etc.) like "File-Save As..." or
"View-Source...". I'm pretty sure I've got to use the ActiveX
possibilities in LabVIEW, but I haven't been succesful. Any comments
will help.
Thanks

You can use Win32 API to simulate a key-press (e.g. ctrl-S for Save)
for IE or any window applications, as long as the application has
short cut for menu items, and active.
You can use external code (VC, VB, dephi, etc..) to build DLL, CIN, or
ActiveX, call them in LabVIEW.
I made "Send Keys.vi" in G Toolbox.
If the menu item doesn't has a shortcut, you can send a message (use
spy tool to find out) to the application.
George Zou
http://gtoolbox.yeah.net

My safari menu bar is missing --the menu bar for desktop, HD, and apps appears, but when I click on Safari, it disappears, so I can no longer see my buttons for History, etc. I think my husband (pc user) clicked it away. Any ideas how to retrieve it?

My safari menu bar is missing. The menu bar for desktop, HD, and apps appears, but when I click on Safari, it disappears, so I can no longer see my buttons for History, etc. I think my husband (pc user) clicked it away when borrowing my computer. Any ideas how to retrieve it? Thanks.

I too was having the same problem However, I could access both the menu bar and the dock by hovering my mouse over them so it wasn't a huge problem but I prefered having it there anyway. I was not in full screen mode and I could still go into full screen mode if I wanted to. I found the easiest solution was to just quit safai and restart it, but it might not work for you considering you couldn't access you menu bar either way.
I found this article that allows you to hide/show the menu bar and the dock through TextEdit (didn't work for me) http://www.mactricksandtips.com/2009/07/hide-the-menubar-or-dock-in-specific-app s.html It is pretty old so it might not work for lion and a bit risky if you don't know what you're doing so I wouldn't really recommend doing it this way.
And KSheppard, I know it's not really any of my buisness, but the way to get answers to a question isn't by insulting others and being quick-tempered. Even if you feel like you were insulted first, don't try snapping at people who aren't obligated to help you. Honestly, it just makes everything easier if everybody is cooperative and polite.

After updating to Firefox 7.0.1, menu bar for Google,yahoo, Facebook (message,notification,profile,home) and others site are disabled. How can solve this problem?

after updating to Firefox 7.0.1, menu bar for Google(web ,image,video,map etc),yahoo, Facebook (message,notification,profile,home) and others site are disabled. even I cant log out from different sites cz the log out bar is completely disabled. I tried with Firefox 4;5 and 6, same problem exist . I tried by active all add ons for facebook, same problem exist. If I use internet explorer , I don't find such problem with it.
How can I solve this problem?

Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
Thanks for your help; hope this wasn't extremely long.

How to remove menu bar for a single tcode

Hi,
I created a Transaction iview with gui for html and now i want to deactive menu bar for a single tcode.
I'am able to remove menubar by passing parameter in Webgui but it will remove menu bar for all.
Can anybody provide me solution.
With regards,
Pradeep.B

Hi,
It's really possible. You can define an ITS service on your R/3 and apply parameter ~WEBGUI_SIMPLE_TOOLBAR. With this parameter you can hide all bars, using different values (3 bits). You can use, for example, value 132.
After that, you define an IAC iview on your portal with your ITS service.
Hope this helps,
Iván.

Menu Bar for RTL Laguages

Hi,
I am new to flex, but excited.
I took some courses in Lynda.com, and the videos reffer to
LTR languges.
I wonder if it possible to make the Menu Bar for Right to
Left languages as well, which means the bars open from the right.
Thank you for your help

I think for this you need to create a custom component. Flex
3 has some support for rendering RTL languages, but I think text
input of these languages has some weaknesses. RTL language aware
controls are not yet in Flex. Maybe Flex 4, but I'm not sure. I
know some of the RTL language weaknesses will be addressed in Flex
4. Until, gotta do extra work.

HT4929 how do I get ICloud on my menu bar for email only?

how do I get ICloud on my menu bar for email only? I have snow leopard so I do not have all the requirements for I Cloud.

I have asked for your email address to be edited out. Posting your address in an open thread is a sure way to be bombarded by unwanted email, remember it will be here long after you have resolved your problem, for automated detection software to find.
If you want people to contact you, enable others to see your email address in your profile.

Two menu entries for every application in Gnome-Shell?!

I have two menu entries for every application, which is kind of annoying, because the menu needs more time to load at startup!

bugs, bugs , bugs!!!!
I got rid of that preoblem by going back to fallback mode, booting one time and then going back
to shell menu! Hope it works for you people as well!!
edit: no seems only to work sometimes, the icons change arbitrarily each time you reboot!
Last edited by gunjah292 (2011-05-06 07:08:16)

Junit testcase for struts application

Hi All,
can anyone provide me the Junit sample testcase for struts application.

> can anyone provide me the Junit sample testcase for struts application.
The test code for the framework is downloadable with the source:
http://struts.apache.org/download.cgi#struts208
If you want unit tests for your web app, you'll need to write those yourself. Plenty examples can be found with Google:
http://www.google.com/search?q=unit+test+struts
~

I'm running Windows 7 on a laptop & Firefox has lost its Menu Bar for Firefox. It says it's turned on, but I can't see it. I have googled various options to try & get it back, but nothing works.

I am running Windows 7 on a laptop and I have lost my Menu Bar for Firefox. It says it's turned on, but I can't see it. I have googled various options to try & get it back, but nothing works. Any suggestions would be appreciated...

Downloaded Mozbackup & backed up all bookmarks, extensions, passwords (not settings)
Uninstalled Firefox completely (Using REVO Uninstaller)
Reboot
Re-install Firefox
...Ran MozBackup & restored profile
Woo HOO !!
The problem was an add on: Hide Caption Titlebar Plus
Once I uninstalled that - the menu returned
Thanks for your support anyway

Speach no longer activates menu bar items or application specific items

I have been using the speach capabilities of the IMAC 20" intel system. I was able to have the computer open items on the menu bar but this has stopped working. In the preferences for speach I have checked all the speakable items catagories but
Application Specific items, Applications switching, Front Window, and Menu bar do not have a configure button usage available. What would cause this and how can I get this capablity back?

I have just noticed this same issue, and would appreciate a fix, should anyone have one.
It was very convenient to have the menu bar and application commands.

Menu bar disappears when applications quit

Hello everyone,
I have this issue on my brand New iMac 27 (core i5 / Fusion drive) since it's out of the box : each Time i quit any application, the menu bar disappears and i have to click on the desktop to make it back.
Any clue anyone?

I just got a 27" Core i5 with the Fusion Drive and it was doing the same thing - Menu Bar would disappear from screen when I quit any application.
I called Apple, their guy (nice guy, btw) told me to do the following:
- power off/shut down the Mac
- unplug the power cord
- press and hold the power button for about 10 seconds
- plug in the power cord
- restart
I did this and the problem was resolved. He said this procedure resets the System Management Controller.
It worked for me - hope it works for you and others who experience this.

Standardization of Menu bar for many device

Hi everyone,
I develop a application which use formular with textfield, list and so on.
My application work. But when I test it on Nokia S60, on Siemens and on Sony Ericson : the result is different.
Every device add bouton in the menu bar.
For example : Nokia add "exit" bouton
On sony ericson : to enter something in a textfield we can't enter directlty, we have to choose the bouton "Modify" and after, the device open a new form with only my textfield. And the sony ericson add many bouton in the menu bar.
But I have read that we can create our own menu if we use the canvas. Is it correct?
But my problem it's here : if I use the canvas, how can I use the textfield and the list and recover my selection??? It is possible?
Thanks in advance.
Myriam.

Swipe down on the screen to reveal the URL field, etc. Touch the blue bookmark icon to the left of the URL field to hide the bookmark menu bar.

Menu Bar for Struts application

Similar Messages

Maybe you are looking for