Menu bar shows when I stop the error 8 occur during run mode of .exe file

when error 8 occured and I click on "stop"
option rather that "continue".then vi stop and file,edit menu shows. in
exe RUN mode,this is also happend so what is the solution for not
seeing the menu bar when i stop the error 8 option in run time. it
should be stop as it is condition..

Hi Milap,
have you read my comment in your other thread?
This error message pops up when you don't have programmed any error handling!
Well, you use "Write to spreadsheet file" for saving your data. Look inside this function (and it's subvi "Write Spreadsheet string") to see how to use low level file functions. After the "Open/Create/Replace File" you have to check for any error (like error 8)...
Message Edited by GerdW on 06-26-2008 10:44 AM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Similar Messages

How to rectify the errors occured during session method

how to rectify the errors occured during session method

HI
When the execution of session is completed: we can check the errors via the log.
Rectification of errors depends on the kind of errors. It is not specific that we have to approach the same way to handle all kinds of errors.
Errors can be due to data format, inconsistency due to the configuration, unavailability of master data...
Kind Regards
Eswar

TS3212 I purchased this computer today Windows 7; I have gone to the 64-bit download but at the end of the download I receive an error message saying the error occured during installation. Cannot download, any other way?

I purchased this computer today Windows 7; I have gone to the 64-bit download but at the end of the download I receive an error message saying the error occured during installation. Cannot download, any other way?

What does the error message say? (Precise text, please.)

Error occurred during automatic upgrade of MDL file

The MDL file is exported from 10.2, we were trying to imported it into 11.2 using OMBIMPORT, got following error message.
MDL1323: Error occurred during automatic upgrade of MDL file </opt/etl/etl.mdl>.
Detailed Error Message:
Error: MDL1122: Import data file auto_upgrade.src not found
Any suggestion is greatly appreciated.

I had the same problem
MDL1323: Error occurred during automatic upgrade of MDL file <>.
Detailed Error Message:
Error: MDL1122: Import data file auto_upgrade.src not found
Reason:
I exported mdl from 11.2.0.2 version to 11.2.0.1
Solution:
- Upgrade version DWH from 11.2.0.1 to 11.2.0.2
- Install separate client on the server DWH and run import script from client directory

The import was stopped, an error occurred during the phase DDIC_ACTIVATION

Dear all,
When I import the SAP_BASIS support package SAPKB70019 , it appears the error as below :
The import was stopped, since an error occurred during the phase
DDIC_ACTIVATION, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
     -   Error in phase: DDIC_ACTIVATION
     -   Reason for error: TP_STEP_FAILURE
     -   Return code: 0008
     -   Error message: OCS Package SAPKB70019, tp step A, return code
         0008
Notes on phase DDIC_ACTIVATION
In this phase the imported Dictionary objects are activated. This phase
can terminate due to the following reasons:
o   TP_INTERFACE_FAILURE: The tp interface could not be called.
o   TP_FAILURE: The program tp could not be executed. For more
     information, see the SLOG or ALOG log file.
o   TP_STEP_FAILURE: The tp step DDIC activation could not be performed
     successfully. To see the cause of the error in the activation log,
     choose Goto -> Log -> Queue.
     If you import two or more Support Packages in one queue, and you do
     not activate them in the correct sequence, activation errors may
     occur. In this case, the activation errors disappear when you repeat
     the activation run. To do this, choose Support Package -> Import
     Support Package Queue.
    A prerequisite of the Support Package Manager is that the Change and
    Transport System (CTS) is configured correctly. For more detailed
    information, read the online documentation available from Help -> SAP
    Library -> mySAP Technology Components -> SAP Web Application Server ->
    Change and Transport System .
    A list of the most important SAP Notes for Online Correction Support
    (OCS) is available in SAP Note 97620, which is updated regularly.
I have used se11 to avtive the domain SEFS_CRAWL_ALGORITHM , but the error still exist.
Hope anyone can help. Thanks!
B.R
Michael

P762713 wrote:>
> Hi ,
>
>     This is general issue now a days occuring in Support Packs .The only solution for this issue is to delete structure ::
>
> these were the structure deleted from system afterwards patches were installed successfully.
>
> /1PYXXFO/SAP_PAYSLIP_____L0001
> /1PYXXFO/SAP_PAYSLIP_____T0001
> /1PYXXFO/SAP_PAYSLIP
>
> /1PYXXFO/SAP_PAYSLIP_____L0020
> /1PYXXFO/SAP_PAYSLIP_____T0020
>
> You can do this via Tcode se11 .give these info in data type & in turn you have to delete 1PYXXFO/SAP_PAYSLIP also.This has solved my issue & after this support pack went fine.
>
> Thanks..
> Mohit
>
> Edited by: mohit gupta on Sep 23, 2009 9:15 AM
Hi, mohit
      I have tried to use the t-code se11 to delete the structures, but the system telled me that they are all not exist .
A part of the queue log as below:
   Field name KEY is reserved (Do not use structure as include in DB table)
   Field name PRIOR is reserved (Do not use structure as include in DB table)
   Field KEY: Component type or domain used not active or does not exist
   Exactly one field SPRAS of type LANG: Selection as text language possible
Nametab for table /1PYXXFO/SAP_PAYSLIP_____L0001 cannot be generated
   Enhancement category for table missing
   Enhancement category for include or subtype missing
   Field name KEY is reserved (Do not use structure as include in DB table)
   Field name PRIOR is reserved (Do not use structure as include in DB table)
   Field KEY: Component type or domain used not active or does not exist
   Nametab for table /1PYXXFO/SAP_PAYSLIP_____L0020 cannot be generated
   Enhancement category for table missing
   Enhancement category for include or subtype missing
   Field name KEY is reserved (Do not use structure as include in DB table)
   Field name PRIOR is reserved (Do not use structure as include in DB table)
   Exactly one field SPRAS of type LANG: Selection as text language possible
   Enhancement category for table missing
who can help me ?
thank you very much
BR.
Michael
Edited by: Michael Hong on Sep 23, 2009 12:36 PM

FF won't open and an error message appears on the screen "unresponsive script" it I open task manager and stop the error message FF runs normally, how do I fix this problem

This problem only started when I upgraded to FF 4.0. I am running Windows 7. When I go to the task manager I am able to see the error message in the processes area, if I highlight it and tell the task manager to stop it, FF immediately starts and runs normally. I have no idea where the error message is coming from.

This problem only started when I upgraded to FF 4.0. I am running Windows 7. When I go to the task manager I am able to see the error message in the processes area, if I highlight it and tell the task manager to stop it, FF immediately starts and runs normally. I have no idea where the error message is coming from.

What is said by an internal error occured during running the adobe reader?

when i try to run adobe reader or open a pdf file i get an error message saying an intenal error occured. even i re installed the softaware didnt work out.

It could be an issue with the user permissions (since other users are able to access the application without any issues). Could you please try and delete all the files from the following locations:
1. C:\Program Files\Adobe\Reader 10.0 (except for the Setup Files folder.)
2. C:\Program Files\Common Files\Adobe
Try running the repair operation (once again) from within the Control Panel and see if it solves the issue.
Thanks
Ankit

Facetime shows " An error occurred during activation Try again"

I have reset Ipod and tried other wifi connections. How can I get facetime to work when it says " An error occurred during activation"?

If you get an error when trying to activate iMessage or FaceTime
FaceTime, Game Center, Messages: Troubleshooting sign in issues

Error occurs during Asset Master Record Creation.

Hello SAP Gurus,
The error occurs during asset master record creation.
Our fiscal year variant is Z6 (July to June). The asset was acquired in June 15 (previous fiscal year) but was only set up on July 30 (this fiscal year) . When we put the depreciation start date as 15 June the error appeared. While saving the Asset master we are getting below error.
We tried the same with Post Capitalization of Asset (ABNAN) there also we are getting same error.
ERROR: - as below
u2003
SYST: *You cannot determine the period for rule 02 to 05.08.08 ( todayu2019s date )*
*Message no. AA613*
*Diagnosis*The system could not determine a depreciation period on 05.08.08 for period control 02 of the period control method of phase N1 of depreciation key INTERN-00001-0000.
Procedure
Maintain the assignment of the periods for the period control entered.
Proceed
If the period control you entered is a standard period control, you can assign the periods automatically.Proceed
Please find enclosed attachment for clear description of the error.
Please share your experiences regarding this subject.
Thanking you in anticipation.
Regards,
Suresh.
09986375966

Hi,
have you generated the period controls properly? If not, the error is raised correctly by the system.
To generate period controls go to:
IMG Asset Accounting -> Depreciation -> Valuation Methods -> Period Control -> Generate Period Controls / or you can use OA84
Regards,
Markus

Error occured during processing

Hi All Experts,
I would like to inform you, that the error occured during processing when i can click on any tab it can gives an Error Message " NULL_NO_CONTENT_LABEL1 Reload ".
But when i click on reload it opens the page but sometime again the same error occured .
For example:
If i create a Room Template inside there is muliple template so when i click on any template its gives the same message.
How i can reslove this issue please guide us.Waiting your valuable suggestions.
Guys can anyone let us guide me .
Regards
RS

Hope this thread helps you.
https://www.sdn.sap.com/irj/scn/thread?messageID=5640561#5640561

Error occurred during Oracle Enterprise Manager 12c (12.1.0.3) installation

Hello all,
I ran into some error during installation. And I need your help in solving this problem. The error occurs during Step Configure (Configuration assistant "Repository Configuration" has failed) and the Repository Configuration in the Installation Progress Details view.
And the error is shown below is from ViewLog and from the terminal where I launched runInstaller. Thank you all in advance for your helps.
ViewLog:
INFO: oracle.sysman.top.oms:Completed Prereq check
INFO: oracle.sysman.top.oms:The plug-in Plugins Prerequisites Check has successfully been performed
INFO: oracle.sysman.top.oms:About to execute plug-in Repository Configuration
INFO: oracle.sysman.top.oms:The plug-in Repository Configuration is running
INFO: oracle.sysman.top.oms:Internal PlugIn Class: oracle.sysman.oms.RepositoryConfiguration
INFO: oracle.sysman.top.oms:Classpath = /test/vince/em_install/oem_mgr/oms/sysman/jlib/emprereqkit.jar:/test/vince/em_install/oem_mgr/oms/sysman/jlib/emCoreSDK.jar:/test/vince/em_install/oem_mgr/oms/sysman/jlib/omsConfig.jar:/test/vince/em_install/oem_mgr/oms/jdbc/lib/ojdbc6.jar:/test/vince/em_install/oem_mgr/oms/sysman/jlib/emcore_client.jar:/test/vince/em_install/oem_mgr/oms/../modules/com.bea.core.apache.log4j_1.2.13.jar:/test/vince/em_install/oem_mgr/oms/jlib/rcucommon.jar:/test/vince/em_install/oem_mgr/oms/jdbc/lib/ojdbc6.jar:/test/vince/em_install/oem_mgr/oms/sysman/jlib/emagentSDK.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.xdk_11.1.0/xmlparserv2.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.xdk_11.1.0/xml.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.dms_11.1.1/dms.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/test/vince/em_install/oem_mgr/oms/jlib/rcu.jar
INFO: oracle.sysman.top.oms:BaseConfiguration:invoke:Starting BaseConfiguration invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=2:microstep=0
INFO: oracle.sysman.top.oms:Inside perform method
INFO: oracle.sysman.top.oms:Running the Schema Action...
INFO: oracle.sysman.top.oms:Setting required properties
INFO: oracle.sysman.top.oms:REPOS_USER: SYSMAN
INFO: oracle.sysman.top.oms:SYS_USER: SYS
INFO: oracle.sysman.top.oms:CONNECT_STRING: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:ORACLE_HOME: /test/vince/em_install/oem_mgr/oms
INFO: oracle.sysman.top.oms:mgmtTabLoc :
INFO: oracle.sysman.top.oms:confDataTabLoc :
INFO: oracle.sysman.top.oms:defaultDataFileLoc :
INFO: oracle.sysman.top.oms:ad4jDataTabLoc :
INFO: oracle.sysman.top.oms:EMSCHEMA MANAGER: oracle.sysman.emdrep.schemamanager.EMSchemaManager@31e5eb16
INFO: oracle.sysman.top.oms:The required parameters are set for schemamanager
INFO: oracle.sysman.top.oms:Starting both repos upgrade and transx loading in parallel
INFO: oracle.sysman.top.oms:EMSCHEMA MANAGER: create oracle.sysman.emdrep.schemamanager.EMSchemaManager@31e5eb16
INFO: oracle.sysman.top.oms:create_process_id:a5v5w4b86ftf
INFO: oracle.sysman.top.oms:The command run for transx is /test/vince/em_install/oem_mgr/oms/sysman/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl))) -action transx -repos_user SYSMAN -dbUser SYS -mwHome /test/vince/em_install/oem_mgr -mwOraHome /test/vince/em_install/oem_mgr/oms
INFO: oracle.sysman.top.oms:processing arguments
INFO: oracle.sysman.top.oms:compiling arguments for validation
INFO: oracle.sysman.top.oms:stty: standard input: Invalid argument
INFO: oracle.sysman.top.oms:stty: standard input: Invalid argument
INFO: oracle.sysman.top.oms: Enter SYSMAN repository password :
INFO: oracle.sysman.top.oms:stty: standard input: Invalid argument
INFO: oracle.sysman.top.oms:stty: standard input: Invalid argument
INFO: oracle.sysman.top.oms:Verify :
INFO: oracle.sysman.top.oms:Enter password for: SYSMAN
INFO: oracle.sysman.top.oms:   done checking required user credentials...
INFO: oracle.sysman.top.oms:done creating arguments...
INFO: oracle.sysman.top.oms:creating logger..
INFO: oracle.sysman.top.oms: Connection exception in action logger path calculated: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/
INFO: oracle.sysman.top.oms: action logger path calculated: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/
INFO: oracle.sysman.top.oms: no action logger file name from previous session
INFO: oracle.sysman.top.oms: action logger filename after search: emschema.log
INFO: oracle.sysman.top.oms: action logger filename finally: emschema.log
INFO: oracle.sysman.top.oms:Logger FileName:/test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/emschema.log
INFO: oracle.sysman.top.oms:already exists: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/emschema.log
INFO: oracle.sysman.top.oms:oracleHome: /test/vince/em_install/oem_mgr/oms
INFO: oracle.sysman.top.oms:connect_string: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:done connection validation without error
INFO: oracle.sysman.top.oms:action to perform is: transx
INFO: oracle.sysman.top.oms:action to be performed:TRANSX
INFO: oracle.sysman.top.oms:action is transx - non RCU based action
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/
INFO: oracle.sysman.top.oms: action logger filename finally: emschema.log.TRANSX
INFO: oracle.sysman.top.oms:Logger FileName:/test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/emschema.log.TRANSX
INFO: oracle.sysman.top.oms:newly created: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/emschema.log.TRANSX
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/
INFO: oracle.sysman.top.oms:process_id:132hgzixoqx34
INFO: oracle.sysman.top.oms:Initialization...
INFO: oracle.sysman.top.oms:Driver: oracle.jdbc.driver.OracleDriver
INFO: oracle.sysman.top.oms:jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:Failure...
INFO: oracle.sysman.top.oms:exiting the thread...
INFO: oracle.sysman.top.oms:[Initializing the EM RCU Runner, Failed Parameter Validation]
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/
INFO: oracle.sysman.top.oms:The transx command execution is completed with the status 255
INFO: oracle.sysman.top.oms:transx_retCode:255
INFO: oracle.sysman.top.oms:The transx action failed, Run the RepManager with -action transx
INFO: oracle.sysman.top.oms:process_id:a5v5w4b86ftf
INFO: oracle.sysman.top.oms:Failure...
INFO: oracle.sysman.top.oms:1 error(s) happened in performing the action:
INFO: oracle.sysman.top.oms:1):
ORA-65096: invalid common user or role name
File:/test/vince/em_install/oem_mgr/oms/sysman/admin/emdrep/sql/core/latest/admin/admin_create_repos_user.sql
Statement:CREATE USER SYSMAN IDENTIFIED BY ****** DEFAULT TABLESPACE MGMT_TABLESPACE   QUOTA UNLIMITED ON MGMT_TABLESPACE TEMPORARY TABLESPACE TEMP
INFO: oracle.sysman.top.oms:The plug-in Repository Configuration has failed its perform method
Terminal:
PLUGIN_DEP_LIST={}
PLUGIN_PURGE_LIST={}
jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
Processing command line ....
Repository Creation Utility - Checking Prerequisites
Checking Global Prerequisites
Repository Creation Utility - Checking Prerequisites
Checking Component Prerequisites
Repository Creation Utility - Creating Tablespaces
Validating and Creating Tablespaces
Repository Creation Utility - Create
Repository Create in progress.
Percent Complete: 5
Percent Complete: 30
Percent Complete: 55
Percent Complete: 80
RCU-6130:Action failed - RCU-6134:Error while trying to execute JDBC action.
Repository Creation Utility: Create - Completion Summary
Database details:
Connect Descriptor                      : (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
Connected As                    : SYS
RCU Logfile                     : /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0419_PM/m_092513_0419_PM.CREATE/rcu.log
RCU Checkpoint Object                   : /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager//RCUCheckpointObj
Component schemas created:
Component                       Status Logfile
EM Repository Creation Configuration            Failed No log created
EM Repository Init Configuration                Failed No log created
EM Repository Common            Failed /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0419_PM/m_092513_0419_PM.CREATE/em_repos_common.log
Repository Creation Utility - Create : Operation Completed

You are using DB12 as EM repository which is not certified. From the log, ORA-65096: invalid common user or role name , some people have reported similar issue while using DB12 as their repository.
If this not the case then log an SR with oracle support and upload the logs:
- $ORACLE_HOME/sysman/log/schemamanager zipped
- $ORACLE_HOME/cfgtoollogs/ zipped
- central inventory logs

I just got an IPAD2 on Saturday. With the Mac, I could always tell when programs were open/running by going to the menu bar. How can I tell what programs are running in the background. I am struggling with not being able to go to a menu bar at the top

I just got an IPAD2 on Saturday. With the Mac, I could always tell when programs were open/running by going to the menu bar. How can I tell what programs are running in the background. I am struggling with not being able to go to a menu bar at the top

You can see which apps are open and/or recently used by double-clicking the home button to bring up the taskbar at the bottom of the screen (not all apps that appear there are active) - you can then close apps on it by pressing and holding one of them for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar. If you have an app 'open' on-screen then it won't appear on the taskbar, you will need to go back to the homescreen first, and it should then show when you next open the taskbar.
If you haven't already got a copy then you can download the iPad manual from here : http://support.apple.com/manuals/#ipad

Can i have the orange firefox symbol AND the firefox menu bar showing at the same time?? and how??

hi, i just downloaded firefox 16 and would like to know, can i have the orange firefox symbol thats at the top left corner of the page, AND the firefox menu bar showing at the same time??? i'm new to this, and old, and hope i can do this..thanks for your help...joan albert

Here are two "Menu" add-ons which alter the Menu bar into one button.
With this one you can move the new "Menu" button into the Customize Palette, and then when you hit the '''Alt''' key the "Menu will open down from the Titlebar on the left. Won't affect the action of the Firefox button when you de-select the Menu Bar.<br />
https://addons.mozilla.org/en-US/firefox/addon/compact-menu-2/
This one I haven't used recently, but you can play with it to see what is possible. <br />
https://addons.mozilla.org/en-US/firefox/addon/tiny-menu/
https://support.mozilla.org/en-US/kb/customize-firefox-controls-buttons-and-toolbars

My menu bar does not appear at the top of my homepage on a brand new 27" iMac only when i pull up an app. this does not allow me to shut down my mac when all apps are closed nor does it all me to use finder. any help would be awesome

My menu bar does not appear at the top of my homepage on a brand new 27" iMac only when i pull up an app. this does not allow me to shut down my mac when all apps are closed nor does it all me to use finder. any help would be awesome

Press the escape (esc) key to exit full-screen mode.

I cannot log onto the App Store, the page appears when I call it from the dock or the Apple menu. I can call the log-in box from the menu bar, but on signing in the spinning icon just keeps spinning,(not the beachball). Any suggestions? Using 10.6.7 and u

I cannot log onto the App Store, the page appears when I call it from the dock or the Apple menu and I can call the log-in box from the menu bar, but on signing in the spinning icon just keeps spinning,(not the beachball). Using 10.6.7 and up-to-date on all software. Any suggestions?

Could be a third party app preventing you from being able to login.
Mac App Store: Sign in sheet does not appear, or does not accept typed text
If it's not a third party issue, follow the instructions here.
Quit the MAS if it's open.
Open a Finder window. Select your Home folder in the Sidebar on the left then open the Library folder then the Caches folder.
Move the com.apple.appstore and the com.apple.storeagent files from the Caches folder to the Trash
From the same Library folder open the Preferences folder.
Move these files Preferences folder to the Trash: com.apple.appstore.plist and com.apple.storeagent.plist
Same Library folder open the Cookies folder. Move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Relaunch the MAS.

Menu bar shows when I stop the error 8 occur during run mode of .exe file

Similar Messages

Maybe you are looking for