MENU button doesn't work and iPod won't turn off!!
For some reason, my menu button won't work nor will my iPod turn off when I hold down the play/pause button.
I've reset it, updated it, restored it and nothing is working. I bought it in the States last year so have no idea how the warranty works or where to get it serviced since I don't live near London.
Any help would be appreciated
Ring your local Apple dealer, My older mini done the same thing several times before it just died on me and never turned back on. So if its still covered under warrenty i seriously think you should ring apple and get it serviced to see whats wrong, it could be just a fault with the click wheel
Try letting the battery run completly dead, then put it into a Wall charger or computer USB cable and then move the hold on and off, then try reseting it by pressing the menu and select buttons at the same time.
Similar Messages
-
Frecuently the earphone and the microphone doesn't work, specially with skype and the music (ipod), and I have torestart (turn off) my Ipad !.
What I have to do?
Thanks in advance for your support.Have you reset the iPad by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen? If that doesn't resolve this, you can try resetting all settings. Settings>General>Reset>Reset All Settings. You will not lose any data, but all device settings will have to be entered again.
If that doesn't fix it, your next step might be to backup then erase all content and settings or restore the iPad to factory settings. See how if goes if you reset all settings first. -
My Firefox 8 Menu button doesn't work and neither does the right click in the firefox window
It seems that all the drop down buttons in the browser, including the bookmarks dropdown menu in the toolbar and the main menu button (firefox button), no longer work. This happened after i upgraded to firefox 8. I've tried uninstalling and reinstalling several times while also deleting user preferences and stuff but that doesnt work. But everything seems to work in safe mode properly. So i disabled all my addons in the normal mode but it still doesn't solve the problem. My right-click doesnt work anywhere in the browser window either. And also, although the menus are not showing, it seems that they are still there because if i click in the area that a button would be in the function activates, this is how i was able to disable the addons.
Perhaps, it's a multi-monitor setup issue. I noticed that the problem happens on my right monitor, but it doesn't happen on my left monitor! I have an nvidia card.
-
Lock/power button doesn't work and phone tries to turn itself off
So this morning i woke up and for some reason my power/lock button on my iphone 4s doesn't work, but that's not the biggest problem because there are work around's. the real weird thing is that now my phone just decides its going to shut down. It will randomly bring up the screen to swipe to shut down even when im not even holding my phone. Unfortunately my phone is out of warranty so I am getting ready to do a restore but other than that i have no idea what else i might be able to do.
any help is welcomed.Here is Apple's article on jailbreaking. It is against the terms of this Apple forum to help with jailbroken devices. Jailbreaking frequently causes problems.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues -
Try:
- iOS: Not responding or does not turn on
When it says place in recovery mode use one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Sleep button doesn't work and computer won't recognize phone anymore. help!
I woke up this morning to find that my Iphone was not going to sleep. pressing the top right bumper button does nothing for me. the screen randomly flashes that charging isn't supported even when i don't have it plugged in. when i plug it into my computer, it will not recognize it at all. i need your help!
If it is an iPhone 3GS then it should be covered under warranty, as the device has not been out for a year yet. I would suggest that you make a genius appointment at an Apple Store near you, give Apple support a call, or setup a call with an Apple Expert...
http://www.apple.com/support/expert/ -
My button doesn't work, and I have two scratches on the bottom, and my iPod won't turn on also I have no more warranty
Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem besides the button and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i turned my ipod off, and it won't turn back on. charging doesn't work and it won't be recognised by wi-fi or usb connections. how do i fix it?
Check your cable whether it is good. If it is use the wall plug to charge at least half an hour. See how it goes.
-
The menu button doesn't work! Please help me!
I own a really cute ipod mini and i love it. But I had some trouble lately...the latest problem: my menu button doesn't work. well, i did everything i could do...reset all setting etc etc. but the problem still persists. Please help me!
Windows XPI own a really cute ipod mini and i love it. But I
had some trouble lately...the latest problem: my menu
button doesn't work. well, i did everything i could
do...reset all setting etc etc. but the problem still
persists. Please help me!
Windows XP
same thing is happening to mine. i own a silver mini and recently it has been acting skrewy. the backlight goes on and off (without holding MENU and when the setting is at OFF) and the menu button doesnt work too. just today i discovered that when i do the HOLD switch it replaces the MENU process or ability.
PLEASE HELP! -
Help!! My menu button doesn't work anym
Hi, I have Nomad Zen jukebox usb 2.0 20Gb, suddenly my menu button doesn't work, there is no reaction when i press the menu button, but the other buttons work very well. Without menu button, i can't load any songs, so my mp3 player is useless. As an information, before i cleaned up the playlist, the player can play songs. Any response will be appreciated.
Thanks!Have you tried resetting the player and running a disk cleanup? To access the Rescue Mode hold down the play button and KEEP it held down, press the tiny reset switch once, and KEEP the play button held down until the player boots into the Rescue Mode. Choose Disk Cleanup from the menu.
-
My home button doesn't work and the password has changed itself
my home button doesn't work and same how my password changed on it's own so wha do I do ?
Place the iPod in recovery mode using one of these programs and then restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella -
Hp2311x menu button doesn't work
I have an hp 2311x monitor. I've been using is with a PC with DVI for a couple of years. I hooked it up to a new computer with VGA only. I can't get the menu to display so that I can change it to VGA. The menu button doesn't work. It did briefly one time, but it didn't take my input. How do I get the menu to come up? This is driving me crazy.
Hello tpferro,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that you are looking to connect your monitor to your computer, and I would be happy to assist you!
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at
http://h30499.www3.hp.com/t5/Monitors/bd-p/bsc-1255
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
HT3176 Menu button doesn't work
Menu button doesn't work I can scroll up and down but when I hit the menu it doesn't even push
This has happened to me before. What has happened (if it is the same problem as mine) is the spinwheel has been shifted. What I did was just poped it back in place. You can do this by just pressing the play/pause button down or the skip buttons, just mess around with it until it pops back in place. Otherwise, I don't know what is wrong with it.
-
Insert SIM no Signal Menu button doesn't work
Hi,
I have Virgin Nokia 5800 firmware V40, it's currently locked to the Virgin network. When I place another network SIM ( O2 or Orange) the phone boots up but shows no signal and the menu button doesn't work. I want to unlock and have been given a unlock code by Virgin but I'm expecting to see a SIM Restriction message but nothing. Confused - anyone help or had a similar problem?This has happened to me before. What has happened (if it is the same problem as mine) is the spinwheel has been shifted. What I did was just poped it back in place. You can do this by just pressing the play/pause button down or the skip buttons, just mess around with it until it pops back in place. Otherwise, I don't know what is wrong with it.
-
I have a virgin moble iphone that i found, the power button doesn't work and the phone is saying disabled,what can i do to fix it?
Probably nothing, the phone has a high likelihood of being stolen and if you try to Restore it you will run into Activation Lock. Turn it in to the local authorities.
Maybe you are looking for
-
Help, MacBook won't shut down properly!!
Hi, just hoping someone can help with the following as my MacBook is not a happy bunny. I recently reformatted my hdd and restored my system using Time machine. This was to allow me to create a new partition so I could run bootcamp. All was fine for
-
Set Default Date Format in 4.2 jQuery Mobile Smartphone
Hi guys, on "normal" Desktop interfaces you can set a default date format in the Globalization settings. Currently I'm working on a JQM app, and I noticed, that the same settings I have for date format in other apps, don't take affect. I now read in
-
I can burn cd's in logic and usual methods. Waveburner operates completely normally during the begining of the cd burn process then once it starts to burn and shows the meters - it stall's and does not progress to complete the burn. Before I reinstal
-
Error when opening report in Excel
Hi all, I'm trying to import an answer (which I made in OBI) to an Excel via sheet (Via the OBI office plugin). So what I do is: - I navigate to the report I want to open - I expand the report so I can see all the views - I double click the view I wa
-
Update multiple rows of DSO from Datasource
Hi, We have a custom DSO with 4 key characteristics. It is initially populated by a custom datasource correctly. We now need to update some of the data fields using a standard datasource, but it only has two of the key fields available. In the trans