Menu button not available

I cannot get to the menu button on my samsung galaxy 2 10.1 tablet. There is not a menu on the botton of the screen as many keep referring to either. Am I correct that customizing the app is just going to not be possible? Am about ready to give up and uninstall again.

Next steps: if the device does not have a 3 dot menu we need to file a bug and have qa repro.

Similar Messages

Sub menu buttons not working on mobiles

Why are my sub menu buttons not working on mobile phones but working fine on computers?
Sub menu buttons come under these buttons, Our funerals services, Advice and information.
http://www.vanessaroberts.co.uk/

You are using a Spry menubar widget. Spry was created pre-touch-screen systems and hence not designed for touch screens.
There are a number of solutions available to you
1. Don't have an active link on the main menu item
2. Place submenus in the page that is opened by the main menu item, e.g. as a vertical menu
3. Use Spry Menu Bar ver 2.0
3. Use a different menu system that is geared to accommodate touch screens
Because of the demise of Spry, see here http://blogs.adobe.com/dreamweaver/2012/08/update-on-adobe-spry-framework-availability.htm l, option 3 looks like the best option.
There are a number of free-of-charge jQuery menubars, you could also opt for one of the commercial menubars such as PVII, WebAssist or DMXZone

Title & Menu Buttons not working correctly on remote control/ set top player but work in preview.

Title & Menu Buttons not working correctly on remote control/ set top player but work in encore preview. This only happens for a Blu ray project. When a user presses the menu button it should go to the previous menu they were on but it goes to the main menu. When they press the title button they should go to the main menu but it doesn't do anything. My DVD projects work as expected.I've tried creating a new "test" project with different footage and still get the same undesirable results.
Overrides grayed out and set to "not set" for timelines and menus.Project settings and build are set to blu ray. Also I've noticed when I preview a Bluray project the preview window shows a red colored disc next to the Title button when viewing the timelines and green when playing the menus but not so for a DVD project it displays red if motion menus and or timelines are not rendered/encoded. I'm not using motion menus and all the media is encoded according to the project specs.
I've searched this forum but couldn't find the answer. Any help or redirects to a solution would be appreciated. Working with CS5. Thanks.

I found out on my Samsung Blu ray player the remote has a tools button on it that brings up audio, angle, chapter selection etc.and also title selection which is actually the menus and the timelines unfortunately. It's not as easy or direct as last menu selected but it's a workaround at least. I also plan on using a pop up menu. I'll let you know.

Cisco Presence Server 8.5 Application - Cisco Jabber menu option not available

                   Dear Support,
                   I am trying to configure cisco jabber with Presence Server 8.5. All the documentation indicate that jabber option in Presence must be configured in the Application -> Cisco Jabber menu, however this menu option is not available in my Presence Server. Anyone know why this is happening? I am using CUCM version 8.6.1. I installed the jabber client for windows in two Windows 7 machines and I have presence and IM funcitonalities but I can not make calls or activate other features like video, desktop sharing and so on.
                    Any help would be really appreciated.
                    Best Regards,
                    Roberto López.

Thanks a lot for pointing me to the right direction.
Just one more question. After installing jabber for windows on a couple of laptops and signing in, the call option (right click on contact or telephone icon located right to the contact) is not available right away meaning that I have to wait a long time for it to appear or if I start a call from the "search or enter number to call" field then all call button and options are enabled. Do you have any idea why this could be happening?
Best Regards,
Roberto.

Delete button not available for goods receipt when PO has GR-Based IV set

Hi ll,
the delete button for confirmations is greyed out when the PO has the GR-Based IV set, the return delivery button however is available.
There are several goods receipt on the PO some of which have linked invoices but the goods receipt I want to cancel is not linked to an invoice.
I've checked the backend config and it's the same for movement types 102 and 122. Also I can manually post a 102 in the backend.
For PO's without GR-Based IV both the delete and return delivery buttons are available.
Does anyone have any ideas? We are on SRM 4.0.
Cheers
Chris

Hi,
thanks for the response but I don't think this situation is related to backend settings as I can perform a 102 and a 122 against the same PO l;ine directly in R/3.
This appears to be an SRM "feature".
To claifry the situation
PO flagged as GR-Based IV
Purchase Order line has several goods receipts and several invoice receipts matched.
Tryning to cancel a confirmation in SRM for a goods receipt without a matched invoice receipt.
"Delete" button is not available but "Return Delivery" button is available.
In R/3 backend I can post a 102 (delete) or a 122 (return) without any issues.
Config settings are the same for 102 and 122 in the R/3 backend.
Any one any ideas?
Cheers
Chris

"Always Available off line" menu item not available for user on computer where another does see it. This is on Active Directory Computer

I have a lap top that I want to add files via Always available off line.
When I logon and right click on a folder share I can see the menu item all was available offline. When the user logs on this option is not available. I have turned the feature on and off, rebooted, I have deleted the cache folder but I cannot
see how to get this menu item to show up. It's odd that it shows up for one user but not another on the same computer. I have searched the web and tried the above things and others but cannot seem to resolve this problem. It seems pretty
common and their. This computer is on a domain.
thanks.

Hi,
So as we edited the group policy settings in the default domain policy, the menu item is now available?
And as we are in a domain environment and the settings is configured under the default domain policy, how the domain users behave different from each other? Which someone could see and the other not？
Could we please generate a
GPO report to take a check?
And regarding group policy issue, it is recommended to seek help in the group policy forum, experts there may share some insights:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverGP
Best regards
Michael Shao
TechNet Community Support

Menu Buttons not working

I have produced a DVD from movies made in imovie HD 6.0.3 using iDVD version 6.0.4 and find that the buttons cannot all be selected by the DVD player remote control and also the buttons do not appear to be navigated in the correct order. I would appreciate some advive, please.

Different themes seem to work differently, but in general I have found that the buttons in iDVD created DVDs don't always behave like commercial DVDs in respect to what happens when I hit buttons on my DVD player remote. It been that way as long as I remember.
iDVD includes MANY simplifying assumptions that make things easier for home users. If you want full control of what the menu buttons do, you need something like DVD Studio Pro. Most of us just live with the 'quirks'.

S110 menu button not working

Hi,
We're on our honeymoon and been taking good pictures without any problems with Canon S110 until yesterday. The camera suddenly has the following problems:
1. turn on normally but then immediately taking one photo no matter what mode it's on.
2. once the single photo was taken, the camera completely freeze except the display button working and the delete button (working but not be able to select delete)
3. shutter button and zoom in or out is completely useless
3. MENU button is NOT working at all
We have been trying the following:
- new fully charged batterry
- new SD card
- turn off and remove both battery and SD card overnight
It's very frustrated and we only have this camera on this trip. Please help!!!

Just registered to report my solution.
I have a similar problem with the PowerShot S110 of my wife's sister.
At some time a menu button and all joystick buttons stop working.
The problem was because of sticking zoom control (yeah it's very stupid).
At the normal state zoom control must return to central position!
When zoom control is on the left or right position - some buttons don't work.
I hope this info will be usefull to someone.

Menu button not working on iphone4

The lower menu button has stopped working on the iphone 4. Anyway to fix it or do we have to buy a new phone?

"I can't do the manual reboot as that requires you to be able to press menu which I can't do."
Are you sure? Have to actually tried holding the MENU and SELECT buttons to reset it? Sometimes this works even though the menu button doesn't appear to work otherwise.
If it's not working though, you might try restoring it.
http://docs.info.apple.com/article.html?artnum=60983
Cheers!
-Bryan

N8 menu button not woking correctly

If i press the menu button when the device is locked it works fine and brings up the clock. However when i press the menu button on the home scrren the menu does not appear. How should i go about solving this problem?

did u try turning your phone on and off, did you install any new apps that might be doing something funny to your phone? do you have the latest firmware? if the answer is yes and you have tried all these things then a nokia care visit might be in order
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Menu option not available in SAP GUI transaction in Portal

Hi all,
When accessing SAP Transaction iview via the portal 7.31 the drop down menu option is not available in the first session.
It is available in the second session and when accessing SAP Traansaction directly from the SAPLOGON pad, the option allows users to open other sessions and stop transactions.
How can we enable the menu option in Transaction iview in Portal?
Plz find the attaches screen shot of error.

Hi Chandra,
Can you try the same senario with broswer compatible mode?
Because these function will be over ride the style sheet.
Thanks
Patrick

5-Gen Nano Menu Button Not Working

My first post - Cannot get the Menu button to function on my 5th generaton Nano, always has functioned before. So I cannot get it to perform a reset! When I toggle the Hold switch & then hold the Center & Menu buttons down simultaneously, the Ipod turns off but I never see the Apple logo! Tried this while connected to different USB ports, while connected to external power, and while unconnected.
Also been through all the Apple Website directed-actions including uninstalling all Itunes, Quick-time, and related programs and folders (except was unable to delete Temp folder).
I have reinstalled Itunes, and restored the Ipod to no avail!
Anyone have a clue for me?
Thanking you all in advance…

You posted to the wrong area of discussions. This is the 5th Generation iPod group (the video full sized iPods that were released previous to the "Classic" models). If you are asking a Nano question, you want to post to this area...
http://discussions.apple.com/category.jspa?categoryID=265
Regards,
Patrick

Release button not available in Service entry sheet ML81

Dear All..
Release button is not available. while Creating Service entry sheet Through ML81. Any standard settings is Required.. ?..Pls. Give me the Details
Usefull Threads will be Rewarded..
REgards
Senthil

Dear Shentil,
You just get into ML81N and enter the doc no: then you click on the Change button . Now your data will be open to edit there you can find the option to release which looks like a flag.
Hope It helps you.
Thanks and Regards
Prabhul

Dreamweaver CS5.5 Template - Main menu button not going to correct page link

Hi,
Please help me, as i am new to Adobe Dreamweaver.
I created a website in Dreamweaver CS3, then recently changed to CS5.5, firstly i couldn't get the templates to update, but by playing around i managed to get the template up update all the pages. #
I am now having problems when i click on the link in the website, it seems to be looking in the templates folder for the html page.
Website addrerss: www.malegroominglounge.co.uk
Pages that i am having problems with when i click in the menu buttons : Male Waxing, Contact Us & Find us,
This is sometimes working but most of the time comes up with: 'Page cannot be found' and when looking at the URL it is e.g http://www.malegroominglounge.co.uk/Templates/malewaxing.html
Why is it looking at the templates folder?
I have checked the template file in menu url and it has not got an extension to look in the 'templates' folder.
Could someone please help?

Hi
Thanks for your investigation.
Yes i can now see on the source that it is using the templates folder e.g (www.malegroominglounge.co.uk/templates/findus.html), but when I go into dreamweaver template, the code i see is:
<div id="sidebar1">
    <ul id="MenuBar1" class="MenuBarVertical">
      <li><a href="index.html" class=" style1 style21">Home</a> </li>
      <li><a href="aboutus.html" class="style35">About Us</a></li>
      <li><a href="malewaxing.html" class="style35">Male Waxing</a> </li>
      <li><a href="malemassage.html" class="style35">Male Massage</a></li>
      <li><a href="manicure&pedicure.html" class="style35">Male Manicure & Pedicure</a></li>
      <li><a href="facials.html" class="style35">Male Facials</a></li>
      <li><a href="feedback.html" class="style35">Contact Us</a></li>
      <li><a href="findus.html" class="style35">Find Us</a></li>
      <p> </p>
      <li><img src="holisticguild300.jpg" width="130" height="46" hspace="3" /></li>
    </ul>
So not sure what i'm doing wrong.
Can I just check that the 'Don't rewrite relative document paths' check box should be unticked (this is found in DW CS5.5 - Site - Manage Site - Edit - Advanced Settings - Templates)
Any help much appreciated
Cheers

DVD Studio: 1st-Play menu buttons not "clickable" ...

hi Folks,
Using DVD Studio Pro 4.1.2 ... creating my first complex build; I have one "first play" menu,
offering 3 choices (via buttons), that lead to 2 sub-menu's or a 1st track choice.
I embedded a 5-min audio clip to play behind the "1st-play" menu, which I did get to work.
When I simulate the compilation, all buttons on all menus work fine.
When I burned the compilation to DVD, none of the 3 buttons on my first play
menu worked. None seem "clickable" while the music plays, hovering over
any with the mouse did not change the shape of the pointer, as is is expected.
Is there something in the playing of music that might be screwing up the
linking ability of the button?
Seems that once the music stopped, I could somehow get into one of the sub-menu's
playing the DVD on my iMac, playing it on a PC, nothing worked.
Any suggestions would be appreciated!
thanks

Tried Gary's suggestion, dropped in a 3-second black movie (.mov, rendered in FCE - not a graphic) for the 'first-play' menu, which is set to jump the 'main' menu with the 3 choices and the music in the background. It gets to the 2nd menu, but the 2nd menu buttons are also not clickable (again) in the final burn. They ARE in the simulation.
a little frustrated by my Mac world on this one, I sent my AC3 & M2V streams over to my PC - but these files - at least the M2V portions,(rendered by compressor) are not readable and bring up arcane error messages in both my DVD authoring programs on the PC (DVD Architect Studio & DVD Lab Pro). That's a different game altogether, though.
anyway, still wasting DVDs and no answer yet..
thanks for all attempts ...

Menu button not available

Similar Messages

Maybe you are looking for