Menu button not functioning properly

Hi everyone. After I upgraded my iPod Software to Version 1.2.3 I noticed that my menu button starting working improperly. Here is what it is doing, while listening to music I press the menu button to go back and it pauses the music that I am listening to. I press it again and it restarts the music, sometimes from the pause point and other times from the beginning. After I press the button a bunch more times, it goes back a menu but the music will pause, restart, and play a few seconds afterwards. Has anyone heard about this happening or does anyone got a suggestion? F.Y.I. I have completed the 5 R's twice with no luck.
I have an iPod 80GB 5G

Hi,
As this issue seems to be software (firmware) related, you might want to give a try to CopyTrans Doctor http://www.copytrans.net/doctor.php before sending your iPod for repair.
CopyTrans Doctor is said to be a "software iPod repair solution".
That may help.

Similar Messages

Lenovo K3 Note Menu Button Not Working Properly as Mentioned

Menu button shold show the running apps when I press it. But it showing settings. which needs to open when I press and hold it. Pls share the solution.

Just go to display in settings and there will be a check box saying use menu button as recent button. Check that box.

Buttons not functioning properly

Hi, i have 41 slides in my presentation. At the start there
is a Next button. The slide pauses after 12 seconds to allow the
user to click on it. It then goes to the next screen. However if
you use the Back button on the controls below to go back to that
screen and click on the Next button again......it no longer works.
Infact the fwd button on the controls dont work either. I pressed
it a few times and then all of a sudden it jumped to slide 35!!???
Which has a slide with two buttons - one to go to the next slide
and one to go back to the start.....neither of these work. I am
using the blue image buttons. How can I overcome this?
Thanks

Well that solved all but one of them. Thanks for that - but
there's one where it is playing about 10 frames of animation after
the click, so I can't use the gotoAndStop or it won't play the
animation. Its a little tough to describe, but Im using gotoAndPlay
and that sends it to a labeled frame, which plays an animation
where a white box fades in to cover everything. When the white box
is at 100% opacity I have a gotoAndPlay action on that frame which
tells it to start playing an embedded timeline. There's about 10
frames on that embedded timeline too and then a stop. The stop on
the main timeline comes before the embedded one - but those run
independently as far as I know. It all works fine for the first
click, but a second click, no matter how fast or slow I click
advances it to the second stop on the embedded timeline, the main
timeline replays the correct portion again. Hopefully that makes
some sense..
I have posted what I have so far so you can look at what I am
saying. The button I'm talking about is the "projects" button on
the bottom of the screen. A second click sends it to another page.
Here's the link:
http://www.chrismurraydesign.com/

Power button not working properly for iphone 5. Warranty expired on 22 nov 2013 what to do?

Hi,
Power button not functioning properly for my iphone 5. Kindly give advice on what to do. Its warranty expired on 22nd november 2013.

Read here:
https://ssl.apple.com/support/iphone5-sleepwakebutton/

Why are my firefox icons and tabs not functioning properly?

My firefox is not functioning properly since Monday. I have tried uninstalling and installing firefox but the problem is still there when I open it. Please help.

Unfortunately, the most likely explanation is an incompatibility with your graphics card/chipset driver software. One of the effects of Safe Mode is to disable Firefox from using hardware acceleration. To turn that feature off in normal mode as well:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
This takes effect the next time you exit Firefox and start it up again. Any difference?

Cropping tool does not function properly in Photoshop CS3

Cropping tool does not function properly in Photoshop CS3. Always crops to .004" x .004". Tried reinstall with no luck. Any fixes out there?

Reset the tool by right-clicking on the crop tool drop-down/fly-out menu in the top options bar (big crop tool icon above the tools panel, when the crop tool is selected). Be sure to check there aren't values in the crop tool by hitting the clear button in the options bar.

The u, j, m and 7 keys on the keyboard are not functioning properly on my macbook air. Please Help!

The u, j, m and 7 keys on the keyboard are not functioning properly on my macbook air. In its place are a random assortment of keys (Ex - u = "eqrw" or "IOUY"). This randomly happened when logging back in after sleep mode. No liquid damage at all. Please help!

OK, I fixed the problem by doing a SMC (System Management Controller) reset as follows:
1. Powered off my MacBook and removed everything connected except for the power chord.
2. When powered off, I held "Shift" + "ctrl" + "Option" + "Power button" for 5 seconds or so until the little light on the front started to blink rapidly.
3. Powered up my Mac, which took a little longer than usual to start and tested the "missing" keys which now works perfectly again.
Just added another couple of years usage with my aging mac :-)

Why do QTVR interactive images do not function properly or at all?

QTVR interactive images do not function properly. Check this page out in firefox and then in safari and see the difference.....
http://www.edfruinphotography.com/MILLCITY_2.html

I have Safari 5.1.7. I am using Mac Snow Leopard.
That page is using Flash as well as Quicktime. With Firefox, when I drag the cursor, there is no movement until I let go of the button. That makes it very jerky.
You could try disabling hardware acceleration and see if that works better with Firefox, in Preferences > Advanced > General.

Click and Drag in OS X Yosemite 10.10.3 is not functioning properly on desktop folders

The click and drag on my Mac 10.10.3 is not functioning properly. It won't allow me to click and drag folders on desktop or dropping them into emails. Thought I looked every where for solution....... Any input would be appreciated.....Thanks!

Select
View ▹ Show View Options
from the Finder menu bar. In the dialog that opens, select
Sort by: None

N95 8GB buttons not functioning

I've had my Nokia N95 8GB for 2 yeras now, when all of a sudden some of the top media buttons have stopped working, preventing me from accessing messages and contacts which is a complete pain. I have tried taking the phone apart to clean the board and performed a hard reset, but to no avail. Has anyone ever had this problem and have any solutions? Also, would I have lost all my contacts from reseting?
Any help would be appreciated as it's becoming increasingly frustrating not being able to read my new messages!

The likely cause of problem is the connecting foil cable between phone's main body and the sliding/screen section. It can easily be replaced with new unit which costs about $20. Make sure you purchase a quality unit. I purchased 2 (very cheap) units from China and 1 unit in USA and all did not function properly. Ended up buying it from reputable source, double the cost and it did work. This is your best option, just replace the part.
Other option is to use a Bluetooth keyboard. I used a mini bluetooth keyboard with my N95 and it controls all keys and shortcut funtions, etc. Not sure if you'll be able to configure keyboard at this stage (without use of some buttons).

HT4623 The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back to the main iPad screen. Any suggestions on how to fix this - all software has been updated to iOS 5.1.1 and no other updates are

The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back tot he main iPad screen. Any suggestions on to hoe to fix this? The software has been updated to iOS 5.1.1, and no furthe updates are available.

This is my boilerplate response when app downloads are stalled or in the "waiting" mode. There are a bunch of things here to try.
Tap on the "installing" icon and see if you can pause the install, then tap on it again in order to resume the install.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download and install at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and see if the install resumes.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

In my newly purchased MacBook Air, Dropbox does not function properly. It asks for Mac OS Password for my computer which I do not have.

In my newly purchased MacBook Air, Dropbox does not function properly (it shows MS Word, Excell and Power Point docs but not pictures). It asks for Mac OS Password for my computer which I do not have. How should I get this password ?

If the user account is associated with an Apple ID, and you know that account password, the Apple ID can be used to reset your user account password.
Otherwise, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select  ▹ Restart from the menu bar.
You should now be able to log in with the new password, but you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.

Satellite P300D-110 integrated webcam is not functioning properly.

Hello everyone,
as the title says, the integrated webcam of my Toshiba Satellite P300D-110 is not functioning properly. Allow me to explain. Using the Camera Assistance Software I can take photo's and record music. If I try to record a video the preview screen turns up black and the end result tuns out black aswell, completely black.
Whenever I try to use my camera with applications such as MSN Live Messenger, Skype or at community websites using Firefox, Internet Explorer or Safari the application in question crashes.
*How did this happen?*
You tell me. This is how it went;
* Day 1: I've started up my laptop and looked at my fresh and clean install of windows vista home premium. I tried out my webcam using the webcam assistance software and it worked like a charm.
* Day 2: Once again I boot up my laptop and try to start my webcam only to find out that it no longer functions.
To give a quick summary of the thread;
* Using Camera Assistance Software provided by Toshiba I can take pictures.
* Using Camera Assistance Software provided by Toshiba I can record sound.
* Using Camera Assistance Software provided by Toshiba I can _*NOT*_ record or preview a video.
* I can not start my camera using any other application such as but not limited to; MSN Live Messenger, Skype, Mozilla Firefox, Internet Explorer and Safar.
* I have downloaded and isntalled the latest drivers from the Toshiba website.
* My laptop is about a week old.
I'm not sure what more I can do, all I want is for the webcam to work, if anyone can help me out please do so.
And if possible WITHOUT having to reinstall Windows Vista Home Premium.
I haven't even used it and wouldn't want to make that a solution for all the problems that might occur in the future.
Sincerely,
a sad customer.

Using Camera Assistance Software provided by Toshiba I can NOT record or preview a video.
Can you please describe the steps how you try to do this? I must ask you this because it runs well on my notebook. When the recording is finished player opens and you can see recorded movie. It is avi format and at the top of this player you can see the path where the movie is saved.
Most strange thing for me is that you cannot use it with Skype. Ok for MSN is not the perfect but there is absolutely no problem with Skype. Check the settings and it must work somehow.

The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages: "Extensions may not function properly because it does not meet the dependency conditio

The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:
"Extensions may not function properly because it does not meet the dependency condition."
OR
Extension Status is not consistent with extension set configuration."
The reason I opened the Extension Manager in the first place was to check to see if I had installed a third party extension. And I was presented with these warning symbols. I haven't added anything, I haven't done anything that would cause this.
Does anyone know how to fix this???
I am running OSX 10.9.5; Indesign CS6 version 8.0.2 And Adobe Extension Manager version 6.0.8.28.
Thanks in advance!
Nina

Many InDesign pre-installed extensions (Those extensions you have immediately after InDesign installation) define dependency rules in their mxi files. Dependency means that one extension works well only if one or more other extensions are installed and enabled. If this condition is not met, the yellow triangle warning will be shown.
You can select an extension with warning, click "Advanced" tag page in the lower right panel. You will see "This extension has dependency on: <extension name> ...". Check whether every extensions listed here are available and enabled. If not, enable them. Repeat these steps for all the extensions which have warning.

Title & Menu Buttons not working correctly on remote control/ set top player but work in preview.

Title & Menu Buttons not working correctly on remote control/ set top player but work in encore preview. This only happens for a Blu ray project. When a user presses the menu button it should go to the previous menu they were on but it goes to the main menu. When they press the title button they should go to the main menu but it doesn't do anything. My DVD projects work as expected.I've tried creating a new "test" project with different footage and still get the same undesirable results.
Overrides grayed out and set to "not set" for timelines and menus.Project settings and build are set to blu ray. Also I've noticed when I preview a Bluray project the preview window shows a red colored disc next to the Title button when viewing the timelines and green when playing the menus but not so for a DVD project it displays red if motion menus and or timelines are not rendered/encoded. I'm not using motion menus and all the media is encoded according to the project specs.
I've searched this forum but couldn't find the answer. Any help or redirects to a solution would be appreciated. Working with CS5. Thanks.

I found out on my Samsung Blu ray player the remote has a tools button on it that brings up audio, angle, chapter selection etc.and also title selection which is actually the menus and the timelines unfortunately. It's not as easy or direct as last menu selected but it's a workaround at least. I also plan on using a pop up menu. I'll let you know.

Menu button not functioning properly

Similar Messages

Maybe you are looking for