Menu button not responding - iPod first generation

I just noticed it today that my old iPod's menu button is not working anymore. Although I can still reboot by pressing the Play and Menu button at the same time.
Does anyone have any idea?
giolicious
Message was edited by: giolicious

Hello giolicious,
And welcome to Apple Discussions!
Have you tried restoring the iPod via iTunes? If not, that would be your next step. Otherwise, if no luck with that process, your iPod may need to be serviced in order to gain full functionality again.
B-rock

Similar Messages

Doomed to "crazy horse" on repeat forever ? "Menu" button not responding

Control button "menu" will not recognize. Ipod mini stuck on song repeat.
This is the first time ipod was set to song repeat, now after two days, menu button will not engage...every button works, volume, start, pause, etc., except the "menu." Am I doomed to listen to "crazy Horse" in repeat forever????? Help! How do I get the "menu" button to work?

Try plugging the iPod into the computer. That usually seems to work.
Also, try a Reset by toggling Hold on and off, then holding Menu and Select for 6-10 seconds, until the Apple logo shows up.
I hope this helps!

Center button not responding, Ipod touch

the center button is not responding as well after installing the new sotfware update,, iOS 6
troubleshooting advice ? : (

but perhaps its the best, maybe you should send your iPod in for a warranty repair, you have the right you know?, those ***** can't tell you otherwise, but i understand you use it for your work, hey, by the way, how can i do that?, i could use the ipod as a recorder too
If you choose not to send it in, you could make worse, imagine, youre pressing the button and suddenly pops out, that's not a warranty covered defect, in fact, they wont take it anymore because they'll think you dropped the iPod or something
Personally, i would take that risk
I Have my own Early 5th gen 30 GB iPod, and indeed it has failed from time to time, but i found out that sometimes Resets and things like that actually are needed for a maintenance on a regular basis, so i do not blame apple for it, ENTIRELY, i live in Venezuela, its like 4500 miles off the U.S, believe me, if my iPod failed like that i would have more trouble than you do hahahahahahaha, no offense...

Menu button not responding

It seems that when i press my menu bottun and my play button it does nothing it just sits there so i was just wonderin *** do i do to fix this cause its makin me mad me off

Well, you can't do a reset if your menu button doesn't work because you need to press and hold both the MENU and CENTER buttons at the same time. Are your MENU and PLAY buttons pushed in?? If I were you I'd send it back to Apple or I'd take it back to wherever I bought it from; you really can't do anything with buttons that don't work.

He menu button of the ipod touch (4th generation) is not working and the service center of ipod is asking us to pay for the fixation of the said item even though it's still on warranty. this is the case number 215866894. And the service center said that t

he menu button of the ipod touch (4th generation) is not working and the service center of ipod is asking us to pay for the fixation of the said item even though it's still on warranty. this is the case number 215866894. And the service center said that they don't cover that center part of the ipod so they're asking us money before they can fix it. We bought the ipod last december 8, 2010 and we brought it to the service center last april, 2011 here in the philippines. And until now they're not fixing it because they're asking us to pay half the price of the item which is 8,040 pesos..

As advised, you need to call Apple about this.
http://support.apple.com/kb/HE57
No one here works for Apple (no one who will reply, anyway) so there's nothing anyone here can do to help you with this issue.
Good luck.

ITunes does not recognize my first generation iPod Shuffle

iTunes does not recognize my first generation iPod Shuffle (512MB). Windows 7 sees the iPod as an empty external drive although the iPod has music on it. The iPod plays the music fine. iTunes does recognize a similar first generation iPod Shuffle.
What can be wrong with the iPod Shuffle? How can I fix?
Thanks,I
Jay

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
-Griff W.

My Center button on my Ipod 3rd generation is not working? What do i do it still goes up and down just doesnt select anything.

My Center button on my Ipod 3rd generation is not working? What do i do it still goes up and down just doesnt select anything.

What I had to was backup my device's data to either iCloud or iTunes. Once it was backed up I erased all of my settings as if my iPad just came out of the box. You set it up again and it will asked you to either start as new, back up from iTunes, or back up from ICloud. If you want to see if everything works you can set up as new, otherwise just pick the choice depending on where you backed up your information. Eventually it will restore all of your information and your iMessage and FaceTime should be working. It worked for me, if you'd like more/better instructions let me know!!

IPod First Generation Song Order Problem

Equipment Specs:
IPOD -- First Generation, 1 G size, Firmware ver # 1.1.5
ITunes -- Ver # 7.2.0.34
Problem
I recently updated to the above version of ITunes. I also recently reset/erased all my songs (no podcasts or nothing else)from my IPOD.
I then reloaded just songs to my pod using the drag and drop method from the music file. I then re-arranged the songs in my desired order.
I then disonnected the pod and exited ITunes.
When I later restarted ITunes with the pod connected, my song order had changed. With the pod still open in ITunes, I am no longer able to change the play order position. As say, move song #45 to position #2 and etc.
Has something changed as I was always able to do this prior to updating ITunes and the pod ?
Was this caused by updating ITunes to the newest version?
Is there a solution to be able to manage the order of your songs as before ?
Thx
Arc
IPOD First Gen 1Gig Firmware 1.1.5 Windows XP ITunes 7.2.0.34

OK, When I am trying to do this, I see the following
columns
1. name
2. time artist and so on
In the name column the songs are numbered.
I've been referring to the UNlabeled column to the LEFT
of the "Name" column all this time... you seem to not be able to recognize that there actually IS such column according to your description.
I'm referring to the numbers on the LEFT side as in this image:
http://a248.e.akamai.net/7/248/51/3053501176226988/www.info.apple.com/images/kba se/305350/305350_1.gif
When I try and move 9 to 5 or whatever there is no
horizontal line as I have seen in previous versions.
I know how I accomplished this task before and it is
not working in this version.
Would it work to revert back to an earlier version of
Itunes ?
Dunno... from what I've read in the iTunes discussions
this problem has not appeared there.
BUT you CAN delete iTunes 7.2 and then go to http://filehippo.com/download_itunes and download 7.1.1 (under Old Versions in box on right side of page)
Install it and see if it solves the problem...
What version are you using ?
7.1.1(5)

Apple (Finder) menu do not respond

I make a search but could find anything related to this specific trouble.
It has happen already few time (3) after download or update a soft (QT) Apple/Finder Menu does not respond anymore to function SLEEP, RESTART and SHUT DOWN.
I have repair permission (no result), run ONYX 1.5.3 (no result), Disk Warrior 4.0 (no result), eDrive -TTP 4.1.2- (no result)...
The Mac (almost) never stop or put in sleep to let utilities like Onyx and TTP check/repair automatically on night.
Since I thought it should be a corrupted preference file, I moved on desktop com.apple.finder.plist, com.apple.systemuiserver.plist and restart.
The two first time I did that, Finder was working again normally. But this time not !
I also try disable Application Enhancer 2.0.2 for testing and also kill the finder from Activity Monitor (an advise), through away again com.apple.finder.plist and com.apple.systemuiserver.plist.
At restart, still no response at menu Sleep, start etc...
Any idea what could I try now to solve that ? It's so boring !

Hi cldjr!
Which of your Macs are you having a problem with? The iMac or the iBook?
What size is the Hard Drive, and how much space is available?
How much RAM is installed, and is it original or added?
By all means, run Repair Permissions, as Dimaxum suggested, which should be run from Disk Utility, located in the Utilities folder, while booted from the Startup Volume, not from the system disc. Instructions posted below.
In addition, if you are able to startup from the system disc, run Repair Disk. Instructions posted below.
If neither of those corrects the problem, reinstalling the 10.3.9 Combo Update, may correct the problem.
When completed, run Repair Permissions once again.
TO REPAIR PERMISSIONS ON THE STARTUP DISK
1.Open Disk Utility, located in Applications/Utilities, and select the startup disk in the left column.
2.Click First Aid.
3.Click Verify Disk Permissions to test permissions or Repair Disk Permissions to test and repair permissions. (I never "Verify". Just run "Repair".)
Rerun RP until the only messages reported, are listed here Spurious Permissions Errors Using: 10.3.x
When "Repair Permissions" is complete. Quit "Disk Utility".
THESE ARE THE STEPS FOR USING DISK UTILITY TO REPAIR YOUR HD
1.Insert the System Install disk, Mac OS X CD-ROM disk, or Restore DVD disk, then restart the computer while holding the C key. Use the System disk, of the OS, that is currently installed.
2.Once started up from CD or DVD, on the Menubar at the top of the screen, choose Disk Utility from the Installer contextual menu for Panther, or Utilities for Tiger.
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from disc to access Disk Utility.
3.Click the First Aid tab.
4.Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5.Select your Mac OS X volume, if necessary.
6.Click Repair. If DU reports errors it has fixed, re-run Repair Disk until no errors are reported.
7.Repeat steps 5 & 6, but select the Hard Drive this time. It's usually the first listed with the manufacturer's model number. Make note of the S.M.A.R.T. status.
8.When finished, select Quit Disk Utility from the Installer menu.
9.Select Quit Installer from the Installer menu.
10.In the resulting pop-up window, choose restart.
11.After the computer has restarted, you can eject the CD.
ali b

My iPod (first generation) cannot connect to the app store nor iTunes. What can I do so that it connects again?

My iPod (first generation) cannot connect to the app store nor iTunes. What can I do so that it can connect and I can install apps or music once more? Also, when I go on the internet and try to search solutions, it freezes and I have to hold the power button for 20 seconds for it to go to lock screen. Any solutions?

Safari does work, right?
Can't connect to the iTunes Store
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors | iPad Insight
It appears you have the original, 1G, iPod, You can update as far as 3.1.3 here:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage
Identifying iPod models

The home and lock button on my ipod 4th generation are both jammed. Is there any way to fix this?

The home and lock button on my ipod 4th generation are both jammed. Is there any way to fix this? This makes the itouch difficult to use. Please help.

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it at an Apple store by making an appointment:
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Title & Menu Buttons not working correctly on remote control/ set top player but work in preview.

Title & Menu Buttons not working correctly on remote control/ set top player but work in encore preview. This only happens for a Blu ray project. When a user presses the menu button it should go to the previous menu they were on but it goes to the main menu. When they press the title button they should go to the main menu but it doesn't do anything. My DVD projects work as expected.I've tried creating a new "test" project with different footage and still get the same undesirable results.
Overrides grayed out and set to "not set" for timelines and menus.Project settings and build are set to blu ray. Also I've noticed when I preview a Bluray project the preview window shows a red colored disc next to the Title button when viewing the timelines and green when playing the menus but not so for a DVD project it displays red if motion menus and or timelines are not rendered/encoded. I'm not using motion menus and all the media is encoded according to the project specs.
I've searched this forum but couldn't find the answer. Any help or redirects to a solution would be appreciated. Working with CS5. Thanks.

I found out on my Samsung Blu ray player the remote has a tools button on it that brings up audio, angle, chapter selection etc.and also title selection which is actually the menus and the timelines unfortunately. It's not as easy or direct as last menu selected but it's a workaround at least. I also plan on using a pop up menu. I'll let you know.

Buttons not responding correctly

Help
I am trying to get a simulation to work but I have problems
with buttons not responding to actionscript properly.
Here is how I have it layed out:
I have a labels layer with 12 keyframes labeled scn2A,
scn2B...scn2L
I have a buttons layer with all of the buttons on it.
The buttons layer has 12 keyframes.
One button advance to the next frame, the other advances to
the next scene.
Each keyframe has the same buttons but different instance
names. scn2DwnA_btn, scn2DwnB_btn...scn2DwnK_btn.
The last keyframe uses a different button with an instance
name of scn2Ok_btn
here is the problem, when I test the movie everything works
fine until the last frame.
The DOWN button is used to advance each frame and then the OK
button is used to advance to the next scene
The down button has no script in the last frame but it is
advancing to the next scene upon a mouse click.
I would be glad to email source to anyone who would like to
help.
Thanks

The code is just basic button code:
scn3Ok_btn.onRelease = function...
all code for each button is on a frame in an actions layer.
each frame is a keyframe.
So frame one actions would reference the instance names for
the buttons in frame one of the timeline.
Frame two actions would reference the instance names for the
buttons in frame two of the timeline.

My home button on my Ipod 5th generation isn't working, whats going on?

My home button on my Ipod 5th generation isn't working, whats going on?

Try and calibrate Home Button
1. Open a stock application like Calendar, Weather or Youtube
2. Hold down the power button until the "slide to power off" control appears
3. As soon as you see it, press the Home button and keep it pressed until the red slider disappears and the app is forced quit to the Home menu

Is anyone having trouble with the "home" button not responding after upgrading to 5.1.1 OS?

Is anyone having problems with the "home" button not responding after upgrading to 5.1.1?

You will not belive how I accidently solved this - !!!
Yes I had the problem immediately after the 5.1.1 'cloud' upgrade, the problems started (on my iphone 4) ... I followed the 'get power down button, then hold HOME for 30 secs' solution, but no result, nothing seemed to work and I was starting to get a bit agressive with the keep it pushed, multiple double click frustrations, icopybot multigesture solutions etc. and paid money ... but this comedy solution now works ...
I discovered it because I ordered a waterproof case for my iphone for my motorcycle ... I've just fitted it to my iphone and all the problems have gone ??? what! ... so wondering why I looked at what the home button on the casing was doing - it was pressing ACROSS the home button i.e. it converted my finger point into a wider 'PRESS
so taking the new case off, instead of using the point of my thumb to press HOME, I used the flat of my thumb to emulate it ....and initially nothing, so I wondered if it wa making better 'cross button' contacts, so I licked my thumb, wiped it and then tried again! - it worked!
I can't explain it but it seems to work - try it! if the double click on HOME doesn't work lick your thumb dry it and try again! I've just done it again
what a mad techno world we live in! :-)
Dave

Menu button not responding - iPod first generation

Similar Messages

Maybe you are looking for