Menu button on Apple TV remote doesn't work.

Hi,
Menu button stopped working on my Apple TV remote control. I tried holding menu and rewind button for 6 seconds but it still didn't help. All other functions work. Does somebody know how to fix this problem?
Thank you,

I'm having the exact same problem soraya1349. My menu button works in the main menus area to go back a screen, but not once I go into the Navi-X portal. In order to go back a screen there, I have to hit "home" and start again at the very beginning. Did you figure out a solution? You're the first person I've come across who has the same problem I'm having!

Similar Messages

  • Apple TV remote doesn't work with my 4s anymore

    Why does the Apple TV remote app not work with my 4s anymore?

    Hi capoconstruction,
    If you are having issues with the Remote app on your iPhone, you may find the following article helpful:
    Apple Support: Remote app for iPhone, iPad, or iPod touch can't connect to iTunes or Apple TV
    http://support.apple.com/kb/ts1741
    Regards,
    - Brenden

  • Apple tv remote doesn't work so I programmed my time warner remote but can't unpair old remote

    I haven't used my apple tv in months and today when I tried using it the remote would not work.  I then tried to program my time warner remote to the apple tv and after I did this whenever I pressed a button on the remote a light flashes three times on the apple tv.  I've read this is because the old remote is still paired to the apple device.  I tried unpairing by holding menu and left on my time warner remote and menu and rewind also but neither combination seems to work as I am still seeing three blinking lights whenever I press a button.  Any help as to how I can unpair my old remote?

    Hi Rudegar,
    Even my Remote is not working.  I changed my battery.

  • Apple Radio Remote doesn't work with the iPod Touch?!

    In the Future it will be possible to use the iPod touch with the radio remote. About a week before on the apple store site the radio remote was supported by the iPod touch.

    http://www.amazon.co.uk/Roberts-ROBI-DAB-FM-Radio/dp/B000WZHJC0/ref=sr11?ie=UTF8&s=electronics&qid=1257068810&sr=8-1
    Better than the Apple radio/remote.
    Works with my (1st gen) iPod Touch.

  • Apple earphone remote doesn't work with lion

    I usuly use my apple in-ear with my macbook pro; and the remote worked fine.
    Until I updated the OS from Leopard to Lion, I can't use the remote anymore, as the in-ear as the original iphone earphone!
    I precise that the microphone is OK.
    Thanks for helping!

    When you say that your label data was kept in Appleworks was it kept in a database?
    If so there is probably nothing that can open it under Lion.
    I know when I did my migration from AW, all of my document I was able to open in Pages and all of my spreadsheet I was able to open in numbers.
    The information I had in AW databse I had to export using AW and then I imported it to Bento. I did all of this before migrating to Lion.
    If this information is that important to you, it may be necessary for you to run Snow Leopard again at least on a partition to get the data exported.
    Allan

  • My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

    My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

    Hey rulosrojos,
    The article linked below details a number of troubleshooting steps that can help restore functionality to your iPod nano.
    iPod nano (6th generation): Hardware troubleshooting
    https://support.apple.com/en-us/TS3474
    Sincerely,
    Allen

  • We just got the Bose TV system.  It is great, but the Bose remote doesn't work with our Apple TV unit.  We have to still use the Apple TV remote.  Any suggestions?

    The Bose TV remote doesn't work on the Apple TV.  I have to use the Apple TV remote.  Is it a system problem with the Apple TV?

    My appletv works with its remote
    Ios devices using the remote app
    2 logitech programable remotes harmony ones

  • HT3180 remote doesn't work 2nd gen

    remote doesn't work 2nd gen

    Welcome to the Apple Community.
    Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

  • Apple Universal Dock doesn't work after full charge

    last night, I put my ipod nano into the Apple Universal Dock.
    I worked just find with the apple remote.
    I stopped the music using the remote, then watched TV about 2 hours.
    After that, I saw my ipod was full charged, and the dock station hasn't worked any more.
    Also, the remote doesn't work as well.
    I can use the play button on the ipod, but no sound out anyway.
    There is another archive thread with the similar problem to me, but no answer yet.
    http://discussions.apple.com/thread.jspa?messageID=7734050

    Anyone used to face this problem before, and got any idea/solution? help please?
    or do I need to send it to the store where I bought?

  • The middle button on my iphone 4 doesn't work properly what can I do about it?

    the middle button on my iphone 4 doesn't work properly what can I do about it?

    Make an appointment with the genius and bring to the Apple Store.

  • The home button of my ipt4g sometimes doesn't work

    the home button of my ipt4g sometimes doesn't work what should i do???

    I have the same proble. I have heard multiple accounts of people going to the apple store with this problem and apple gives tham a brand new ipod.

  • Just bought a pair of earpods for the shuffle 3rd gen the first the remote doesn't work so i exchanged them and these don't work either! I already checked that they are compatible and should work! Any ideas or advice?

    Hi I recently bought a pair of earpods for my 3rd Gen ipod shuffle only the remote does not work, so i exchanged them from an unhelpful member of staff from Currys who said the problem could be my device. So i just tested the new ones and the same problem again! I already checked that they are compatible so i don't understand why the remote doesn't work. Will be greatful with any advice or answers on this one. Thanks!

    Actually they are not compatible: http://store.apple.com/us/product/MD827LL/A/apple-earpods-with-remote-and-mic

  • Stand-by button on Cinema HD display doesn't work after Mountain Lion upgrade

    Hi,
    After I upgraded my Mac mini (spring '09) to Mountain Lion it appears that the buttons on the side of my Cinema HD display doesn't work. There is a setting in sys preferences that should put the Mac in stand-by when the power button is pressed. This doesn't work after I upgraded to OSX 10.8 Mountain Lion.
    Does anyone have similar experience. Anyway to fix it?
    Thanks,
    Henrik

    Have done some further investigating (to no avail).  The TV is displaying in my system Info as follows:
    Intel HD Graphics 3000:
      Chipset Model: Intel HD Graphics 3000
      Type: GPU
      Bus: Built-In
      VRAM (Total): 384 MB
      Vendor: Intel (0x8086)
      Device ID: 0x0116
      Revision ID: 0x0009
      Displays:
    Color LCD:
      Display Type: LCD
      Resolution: 1440 x 900
      Pixel Depth: 32-Bit Color (ARGB8888)
      Main Display: Yes
      Mirror: Off
      Online: Yes
      Built-In: Yes
      Connection Type: DisplayPort
    TOSHIBA-TV:
      Resolution: 1920 x 1080 @ 60 Hz
      Pixel Depth: 32-Bit Color (ARGB8888)
      Mirror: Off
      Online: Yes
      Rotation: Supported
      Television: Yes
    But nothing on the screen.
    Does anyone know if Apple have banned certain screens????

  • Remote doesn't work with Universal Docking Station

    Hi
    I have an iPod nano 3rd gen. Whilst in the dock the remote doesn't work at all until I select some music manually using the nano controls. Then I get a response. This is the second docking station from Apple.
    Surely it has been designed to work with the remote as soon as it has been docked to enable scrolling through the menus? There are archived discussions from years ago about the same problem and no solutions! It appears that this product is known to be defective by Apple yet they do nothing and when you call them they act as if the problem doesn't exist. They appear to be selling products that don't work and then do nothing about it.

    i just bought this dock as a car dock. I have it hooked up to power 12v and output to 1/8 into head unit. Now, I have to be in iTunes music to get it to work and it only allows volume, playing of files in a playlist and to next song. Are any of you guys having issues with VERY limited use of the remote and lack of really a benefit from using a remote because you have to touch it anyways to change through songs or video??? Are you guys wondering why you even bought it if the remote is not supported as a functional addition?

  • The main button of my Iphone 5 doesn't work anymore. do you have a solution? thanks

    The main button of my Iphone 5 doesn't work anymore. do you have a solution? thanks

    Get a replacement phone. If it is still covered by warranty it will not cost anything. See: https://selfsolve.apple.com/agreementWarrantyDynamic.do

Maybe you are looking for

  • How can I select tracks to play from my downloaded music as a casual playlist at the time?

    I have downloaded all my music onto my Ipad and have a list of songs. I have created playlists for various occasions but I want to be able to select and play random tracks as a one off playlist at the time. I cannot see anyway I can "tick" tracks to

  • Add an update button

    Hello everyone! I am using Oracle Forms 6i and here is my problemm.. I am trying to add a button in my forms that will update records in my table. For example I have one datacolumn "TYPE_OF...", in my forms I made an ListItem for this column where I

  • Cannot download magazine purchased

    I have purchased a magazine but always get error when downloading it from the developer apps, how can i get refund from there? Anyone?

  • Role not working on Forms 6i

    Hi everyone, I have create a role under my username and also assigned the role to the same user, but when I try to run my menu I receive the following error: FRM-10256: User is not authorized to run Form Builder Menu Can anyone please help me?

  • Webgui - save local file error

    Hi, I have a problem with the "save local file" (Excel) in the fictional MSS mentioned in webgui. In particular I set tcode fpb_launchpad_cust Application Cate as URL that invokes a service (SICF) custom, which within a custom tcode. to customize the