Menu button/transitions keeps returning to the main menu instead of staying on the scene selection

maybe someone can help?? please...... Ive had this issue before.. it keeps coming up. I'm using Encore. Everything is good to go. Only issue I have is when clicking "scene selection" it transitions to the "scene selection" page BUT then goes right back to the main menu! None of the other pages do that...... and I tried to see the difference from one page to the next but it all looks correct/the same. I even checked the flowchart too.. BUT still keeps bringing me back to the "main menu"! Any help is appreciated.

"You have a main menu button on the main menu that would do what you describe." - I wonder if that is why I keep gettig an orphan alert to when checkig the project!?!?!?
What happens is this: When on the main menu page I click the button to go to scene selections. The transition takes me to the sceen selection page and then jumps right back to the main menu page.
It needs to stay on the scene selection page.. so I can select a scene.
I will clean the cache ad get back to you asap. thanks.

Similar Messages

When I'm on my forum and click the banner to go back to the home page, it opens up a new tab of the home page instead of staying in the same tab; how do I fix this? :S

http://www.sbcforums.com/forums/
It's EXTREMELY annoying. >.>

Third-party system modifications are a common cause of instability and poor performance. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
Reboot as usual (not in safe mode) if you haven't already done so. Launch the Terminal application, copy or drag -- do not type -- the line of text below into the window, and press return:
kextstat -kl | awk ' !/apple/ { print $6 $7 } '
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
Next, do the same thing with this line:
sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
That's one line, not two. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Next, this command:
launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
Again, one line. Finally, one more:
ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/B,P*P,Priv,Qu,Scripti,Se,Sta}* 2> /dev/null
Remember, this is all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
You can then quit Terminal.

Back button returns to the movie, not the main menu

I created an iDVD with a main menu of three options: 1) Video, 2) Photo with audio track, and 3) Photo with audio track.
When I watch the video option and hit the "back" button, I return to the main menu. Perfect. But when I'm in either of the Photo/Audio pages and hit "back", I return not to the main me menu (which is what I want), but to the video.
Why is this happening and how do I correct it? Thanks!

I am a bit confused. When you say the "back" button, do you instead mean the "Menu" button?
Normally the back button would jump you back to the last chapter. If there are no chapters in your movie, then the back button would just back to the default first chapter at 0:00. In other words, back button should restart the movie from the beginning.
Patrick

Mail returns to 'main menu'. My mail worked for over a year - now when i enter mail it returns to the 'mail menu' immediately. I disconnected wireless connection and it still returns to the main menu immediately. HELP!

Mail returns to 'main menu/desktop'. My mail worked for over a year - now when i enter mail it returns to the 'mail menu' immediately. I disconnected wireless connection and it still returns to the main menu immediately. PLEASE HELP!

- Have you tried resetting your iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Can you access the mail account(s) on another device and look for a problem email that may be causing the problem
- You could try deleting account(s) and recreating them

Hi I was using whatsapp on my iPhone5.I was not able go to the main menu by pressing the center button so I hold on to the button for 2 seconds.Then the whole display turned out to be black

I was not able go to the main menu from whatsapp by pressing the center button so I hold on to the button for 2 seconds.Then the whole display turned out to be black & white. how can i fix it?

Hello monicaa003,
Thanks for participating in the Apple Support Communities.
If your iPhone display turned black and white after holding down the Home button for 2 seconds, first try pressing the Home button again to go to the main menu (Home screen.)
For reference, holding down the Home button for 2 seconds will trigger Siri if that feature is enabled:
About Siri - Apple Support
If pressing the Home button doesn't return you to the main menu, try restarting or resetting your iPhone:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Additionally, if Whatsapp is not responding or working as expected, see the troubleshooting steps at this link:
If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Best Regards,
Jeremy

Remote Menu button: to the chapter menu or the main menu?

Using DVD Pro (version 4.2.1) for the first time, and I've discovered a lot of fun elements. Here is a question about the remote control settings.
I want people to be able to return to the +main menu+ if they want while playing the track, by pressing 'menu' (and I've found the resume feature, too). However, the track has chapters, which are assigned to 3 chapter menus. So, when they are playing a particular chapter, i want them to be able to return from it to the +chapter menu+ it came from, by pressing the 'menu' button.
However, this doesn't work: when playing the video track, pressing the 'menu' button takes me to the chapter menu assigned to that particular chapter, not the main menu that I assigned to the track.
Well, I see in the handbook that the marker remote setting takes precedence over the track setting ... so which would you find preferable:
1. when the viewer is playing the video, the menu button: goes back to the main menu.... then when the viewer is watching a particular chapter, pressing 'menu' also goes back to the main menu, instead of the chapter menu, so viewer has to navigate back into the 'scenes' menu
or
2 when watching the whole video, pressing 'menu' takes the viewer to the chapter menu and then has to 'up' to the Main menu.... and therefore when watching a chapter only, 'menu' button returns to the particular chapter's menu, which is fine.
I thought I would have the 'menu' button return to the chapter menu:: up button for faster/easier access to the main menu, for viewers just watching the video, and convenience for viewers watching a chapter.
What is the more experienced opinion?
thank you
Elizabeth

Hal MacLean wrote:... 'Stories'. If you are playing the track from your main menu, then the menu call for the track should take you back to the main menu. If you are on a chapter menu and start playback then instead of going to the chapter marker, go to a story that contains the chapter marker instead. The story can also have a menu call and end jump set.
Ahh!
The thing is, if you start a chapter playing, do you want the footage to continue to the end of the track, ....
Yes, that's exactly what i want, and as above, for the chapter in the chapter menu to return to that chapter menu
If the former, put all of your markers into a single story and set the menu call to go back to the chapter menu.
Thank you!
I had already created stories from the second track on the dvd, with each one having an end jump back to the story menu and as no one had replied to this post, i had decided to make the chapters in the main track into stories too, but wanted them to continue into the next chapter. In fact i'd already created these 11 stories, some with 2 chapters in them, when I read your post.
So i did as you said and put all the chapter markers into one story, with no end jump for the chapters, but a menu call from the story to the 'chapter' menu instead of the main menu. Much cleaner than the way i had started to do.
And it works just the way i want it to : track's menu call is to the main menu, 'chapter' menu calls are to the chapter menu. Thank you so much!
Elizabeth

I cannot open itunes store from my iphone 4s. When I press the application icon it seems to be open at first but then automatically return to the main menu. What can be the problem?

I cannot open itunes store from my iphone 4s. When I press the application icon it seems to be open at first but then automatically return to the main menu. What can be the problem?

Logout of the app store and iTunes store: Settings>iTunes & App Store>Apple ID. Go back to home screen and reset the phone by pressing the sleep/wake and home buttons together until the Apple logo appears then release them.
Once phone has finished rebooting go back to Settings>iTunes & App Store and login with your Apple ID and password again. Then open the iTunes Store app again.

For Making iDVDs: How to do I set my videos so they automatically transition to the next video instead of going back to the main menu every time?

Hello out there!
Im trying to create a magic iDVD and I have some difficulty navigating my options. Some of my video's that I'd like to add are very short clips and I'd like view them back to back without having to go back to the main menu everytime after every short video clip. For example: a 1:08 minute video of my daughter's birthday and then a 3 minute video of her bithday...how do I make it so the 1:08 minute video automatically transitions to the 3 minute video without me having to go back to the main menu to manually select the next video?
Please advise! Thank you so much
citule

You can't. But (there's always a but) if you have enough room (i.e. playing time) available in the project you can create a slideshow in iDVD
and add all of the videos to it.
If you do that set the Slide Duration time to anything except Manual or Set to Music. Also do not select an transition.
When you click on the Create Project button in Magic Movie you'll be able to use the "+" button to add the slideshow to the top menu.
OT

I had reset my iPhone and my Dictaphone refuse to start. I sea a microphone picture but when I push the 3 horizontal bars or the red buttom, they return to the main menu...

I had reset my iPhone and my Dictaphone refuse to start. I sea a microphone picture but when I push the 3 horizontal bars or the red buttom, they return to the main menu...

rstevenson wrote:
If i factory reset my iPhone will it relock to O2?
I've had my iPhone 3G for a couple of years and when out of contract i asked O2 to unlock it, which they did. I've used a Three sim card and it works okay. I've now decided to sell it but before I send it to the buyer i want to factory reset the phone. Will it remain available to use on any network once i've reset it, because i've advertised it as an unlocked phone?
If it was officially unlocked by O2 it will remain unlocked if reset or updated.
Also, just as a side note if you can help. Its running iOS 3.1.3. Once factory reset and connected to iTunes will it force an iOS 4 update or can you choose not to update the OS?
If you restore it in iTunes it will be updated to the current release, 4.3.1. There are ways around this; Google is your friend.

Don't wanna album artworks keep floating on the main menu

Is there any way to disable album artworks keep floating on the main menu of iPod classic?
I think Apple should give us a choice to disable this function with next iPod firmware update.
Some album artworks I don't want to show up there. And the key point is, the resolution of all my album artworks are 200 x 200. It is really enough for my 5G iPod video. But for my new iPod classic, all artworks would be force to enlarge the size for floating on the main menu like screensaver, and they look really crap.
And I think those new default icons on iPod classic are really nice and that's what I prefer to show

Given the resolution you've got them at, the other occurances of them in the UI - like CoverFlow and album art when a track is playing - also probably look not great.
Turn of the option of synching them completely via the Music tab for the iPod in iTunes. Gets rid of the issue completely - and as you say leaves more useful icons in some places.

HT1600 Since the latest up-date I can't see any movies. I always returns to the main menu. Is anyone else having this problem and how do I fix it?

Since the latest up-date I can't see any movies. It always returns to the main menu. Is anyone else having this problem and how do I fix it? We have gone 3 days without the use of renting movies.

Welcome to the Apple Community.
First you should try logging out of your iTunes Store account (settings > iTunes Store > accounts) and then back in again.
If that doesn't help, try resetting the Apple TV (Settings > General > Reset > Reset all settings). You should also try restarting your router.
If both of the above don't help, you should try a restore (Settings > General > Reset > Restore).

Having trouble creating an On/Off button for the subtitles on the main menu

Hello!
I'm creating a DVD with one subtitle track that I'd like to be ON by default but I want users to have the ability to turn them off without the use of the remote. I was thinking of creating a Subtitle on/off button but can't seem to get this to work even though I've read several tutorials. Do I need to create a separate 'set-up' menu with a 'subtitles on' and 'subtitles off' button?
As of right now I have a single button on the main menu that says 'Subtitles On' which I was planning to be dark blue when active (on) and light blue when inactive (off). See what I'm talking about here: http://pfti.org/wp-content/uploads/2013/07/Screen-shot-2013-07-12-at-1.26.47-PM.png
See also: http://pfti.org/wp-content/uploads/2013/07/Screen-shot-2013-07-12-at-1.33.48-PM.png
Any help/suggestions/advice would be much appreciated! Thanks in advance!
N

If I have two buttons, one for Subtitles on and one for Subtitles off, how do I make it so that the one that is chosen is highlighted?
You set it by changing the menu's property for the default button. This is one of the reasons a separate menu is generally used. If you have a single menu with 3 buttons ("play movie," "subtitle on," and "subtitle off"), and you set the default to "Active Subtitle Track," then your "play movie" button won't ever be the default.
To play with this and to decide how you want your disk to work, create a test EN project with 2 menus. Rename one of them "Main Menu" with 2 buttons "Play Movie" and "Subtitle Setup." Rename the second menu "Subtitle Setup" with 3 buttons, "Subtitle On," "Subtitle Off," and "Main Menu." As noted, the "Default Button" property for the menu "Subtitle Setup" will be "Active Subtitle Track." The button "Subtitle On," using specify link, will link to its own menu, default button, but will specify Subtitle 1. Same for the button "Subtitle Off," except that it will specify Subtitle Off. The Main Menu button simply links to the main menu.
Note that in Encore preview, do not use your computer mouse to hover over the buttons. It will trick you into thinking that you have or have not set the behavior correctly. Use the little remote function in the bottom of the preview window.

The Main Menu bar at top is hidden - how do I keep it showing?

The main menu bar at the top of Firefox 3.5 is hidden. I can bring it up using Alt-T but can't keep it showing. Does not seem to be an option in the "Options" menu under "Tools"
== This happened ==
Every time Firefox opened
== Today, after I installed a Jave Runtime update

In Firefox 3.6 and later on Windows you can hide the menu bar via "View > Toolbars" or via the right click context menu on a toolbar.
Press F10 or press and hold the Alt key down to bring up the menu bar temporarily.
Go to "View > Toolbars" or right-click the menu bar or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
See also [[Menu bar is missing]] and http://kb.mozillazine.org/Toolbar_customization

HT1366 My MacBook OS X version 10.6.8 is not going to sleep, keeps loading, then when turned on a blank screen appears, I shut it and the main menu comes up and then it takes awhile for the cursor to operate. Thanks

My MacBook wouldn't go to sleep, it keeps loading, so I have to turn it off. When I turn it on a blank screen comes on, I shut the lid and open it and the main menu screen comes up but the cursor won't work for awhile. Then, eventually, the cursor will work and everything is fine. Hmmm?

Just in case it still didn't work...I copied and pasted the information below...
Battery Information:
Model Information:
Serial Number: D86052301B8DCMDAG
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0301
Hardware Revision: 000a
Cell Revision: 0173
Charge Information:
Charge Remaining (mAh): 3638
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 4196
Health Information:
Cycle Count: 631
Condition: Normal
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 8103
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
Standby Delay: 4200
Standby Enabled: 1
Battery Power:
System Sleep Timer (Minutes): 62
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 62
Wake on AC Change: No
Wake on Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Standby Delay: 4200
Standby Enabled: 1
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 60
Revision: 0x0000
Family: 0x0085
Serial Number: 0x000979a4
Charging: No

When using scene markers (PRE9), is there a way to return the viewer back to the main menu?

I set up scene markers for a dance video I'm editing, and I would like after the viewer finishes watching the selected scene, they are returned back to the main menu without disrupting the play all function. Using just the scene markers it is going correctly to the specific dance/scene, but continues playing the entire video from that point forward. I am aware of the stop marker, but it looks like it's only function is to end the movie and that it shouldn't be used in the middle of a movie. Is there a way to do this? Thank you

Many of us supplement this program with a program from Sony called DVD Architect Studio, a $39 download. If you do your editing in Premiere Elements and your disc authoring in DVD Architect, you can do nearly anything you can imagine.
You can see DVD Architect Studio demonstrated in my tutorials along the left side of this page.
http://Muvipix.com/dvdas5.php

Menu button/transitions keeps returning to the main menu instead of staying on the scene selection

Similar Messages

Maybe you are looking for