Menu complier error in developer6i

Hi Friends,
I converted the menu from 4.5 to forms6i in menu modules & following error comes .
FRM-12404 Items xxx have shared menus xxx
FRM-31626 Shared menu refernece detected in menu module .
Thanks
Harish

I had the same thing happen here. I recreated the menu from SCRATCH and it worked fine. I didn't have a shared menu module and trying to just copy the file and renaming it did not work. I posted the same question in various places and never got any answers.

Similar Messages

  • Complied error

    Complied error message:
    cannot resolve symbol
    sysmbol: constrctor B((null))
    location: class B
    this(null);
    Does anyone have a solution?
    Thanks.
    My class should look like (Sorry, last post is wrong )
    public class A{
    class B{
    public B(){
    this(null);
    public B(X x){
    }

    Document is an Object then.
    What is going on in B(Document doc) and is this(null) the first thing after the {?                                                                                                                                                                                                                               

  • T440P - Error Installing WinXP (ACPI compliant error)

    HI,
    I'm installing WinXPsp2 64bit on T440P.
    I'm using nLite to build an instalation image with AHCI Sata Drivers and when I'm installing show a BSOD with 0x000000A5 error say that BIOS is not full ACPI compliant
    When I press f7 on install show a menu to select ACPI Multiporcesor x64, ACPI Uniprocessor x64 and Other.
    If select Uniprocessor or Multiprocessor the error is the same.
    If select Other don't work because I don't have the driver.
    How can I  download the driver?
    How can I load the driver with nLite?
    Can I update or downgrade the BIOS to obtain its compliance.
    Thanks.
    Cesar.
    Solved!
    Go to Solution.

    If you insist on running WinXP in 2015 you need T430 or older.  T440 and newer will not run XP.

  • 1GB motion menu limit error, have tried every solution

    I'm desperate here, I'm on a deadline and there seems to be no way around this error. I have a project with about 50 motion menus, each an average of 20-30 seconds. I encoded the menu videos to DVD-standard MPEGs before importing them into Encore to ensure the total of them would be under 1gb. All of them total 907mb, yet Encore is STILL telling me my motion menus exceed the limit.
    I also noticed that, even though I specified "Don't Transcode" on all my menu MPEGs, Encore still transcoded about 10 of them, it looks like it transcoded all the transitional videos. This could possibly be putting me over the 1gb limit, but I doubt it as all of them are only around 2-3 seconds each. So two questions: Why is Encore transcoding DVD-compliant MPEGs, and what could be pushing me over the 1gb menu limit? I've read several other topics similar to this, and have tried everything, including checking to see if some of my motion menus were actually pointing to longer videos, they're not.
    Thanks for anyone's help, I'm dead in the water right now.

    Yeah that's exactly what I'm saying, I encoded everything beforehand to DVD-compliant MPEG2 video and Dolby audio files, and everything added up to 906mb (transitions, motion backgrounds and audio). So the only thing not taken into consideration are the subpicture highlights. Could those be 100mb? Good grief, I have 34 minutes of motion menus and transitions at 906mb, if I go any lower these will really start to look bad. I guess there's no other solution here. Is there any way for me to find out how much exactly my menu content is taking up after encoding? It would sure be helpful of Encore to include that instead of just stating that "you're over the 1gb limit".

  • I keep getting the error: "Menu Encoding Error... need to stop burning process" when I attempt to burn a DVD

    Very frustrating... I'm trying to burn a DVD and I've done it about 100 times before.  I've checked the mapping for errors and found none.  When I attempt to burn a DVD, the error mentioned above appears after a few minutes.  I've tried to update all software, restart the computer, and use other DVRs.  Any adivice would be most helpful.  Thanks in advance!

    Hi
    To be able to help we need more exact information and that You try out every suggestion as precise as possibly.
    First step is as always - separate encoding from burn-process - By Save as a DiskImage from File menu in iDVD (as suggested by Old Toad)
    If problem persists in encoding part then
    • iDVD got a corrupted pref file - very common problem
    • Space on Start-Up (Mac OS) hard disk get's too low to be able to store the temp. files from iDVD and Mac OS (can not be stored elsewhere)
    • Material feed into iDVD - can not be digested as strange video codecs and audio files in .mp3 .wma and other exotic formats.
    iDVD pref file - to find out if this is the problem - Easiest and most secure way is to - Create a new User-account and log into this. Re-try iDVD - If it now works OK then the problem is very close to 100% in the pref file. Either do Your work in the new Account or go back and trash the old pref file.
    Space on Start-Up HD - I never go under 25Gb to let iDVD and Mac OS run OK
    Material - Here You need to supply specific information
    • Video - from what Camera - in what codec - If You can open a video file in QuickTime-Player then here open Inspector and read Video format/Codec: nnnnnnnn, size and frame rate - and tell us
    • Audio - All audio I use is in .aiff 16-bit 48kHz (as from my miniDV Camera or 44.1 kHz as from Audio-CDs all other is converted to this. iTunes is even more problematic. Here I collect all needed audio into a new PlayList and this I BURN out as a standard Audio-CD (.aiff) (never .mp3) and in my movie projects I use the files from this CD.
    Yours just trying and Guessing Bengt W

  • IDVD 6 and "menu duration" error

    I have created an iMovie and then an iDVD project. When I attempt to burn an .img file I got an error: "Total menu duration exceeds 15 minutes" The Loop Duration goes to 12:14 minutes. How do I correct this? I'm really getting frustrated on this.
    Pete French

    I apparently missed this.

  • Menu module error run time

    I've created a menu module as normal at forms 9i once i ran it , I got the follwoing error :
    Error opening Oracle*Terminal file fmrweb.
    Any idea to overcome this error?
    Thanks in advance

    Hi, plz suggest how disable or invisible the submenu items. there is no reply for my last post.
    using set_menu_item_property I am not able to achive this.
    here submenu items means e.g TRANSACTIONS-----------> ACCOUNTS ----------> PURCHASE, SALES
    In TRANSACTIONS a menu in the menu bar, and ACCOUNTS is the menu again and PURCHASE ,SALES are items.
    like this any number of submenus we can create for menu bar. But how enable or disable these items.
    with thanks
    gms

  • Menu bar error

    the menu bars sometimes shows all sub levels open in all the pages in muse  plan  and muse design.
    the only way I can fix this is to click on each top level menu item in Each master page,  which is about
    100 items or more.  the menu bar displays closed   normally in preview and when published. 
    i reported this problem over a year ago, and it stills occurs. 
    here is my plan view.  notice how all the menu bar items are extend to show all sublevels
    here is the menu bar in design view.  same problem. 
    i don't want to delete and menu's and rebuild them with a new widget..... 

     Zak,  
    thank you about the menu info.  I thought I was just loosing my mind.  I don't know exactly what action
    causes all the menus to display fully,  but it's a mess.  OK  good news is that it's not me.  
    when I started this site,  I was not able to apply a master page to a master page, so I ended up with a LOT of duplicate menus and headers and footers.      Yes I would like to have one master page that has just the header, menu bar and footer, and apply that to all the other master pages.   I have a row of 4 pics very carefully formatted between the header and the menu bar.  I"m a little worried how to apply the header and menubar as a master and keep the distance exactly right ( they are already grouped.  maybe if I lock it too, then it's exactly in position. 
    all the pics are a standard size.    I would appreaciate any suggestions  about this.  
    the actual web site is   http://farandawayfarms.businesscatalyst.com/index.html   
    i am glad to send you any info you want.    are the screens shots a higher resolution in a email than what is displayed in 
    the user forum?  or do I need to do something different to give you more info.   
    I'm also having issues with my google calendar displaying properly ( I wrote a discussion item )
    http://farandawayfarms.businesscatalyst.com/weeklylessons.html
    the map page has the footer skewed far to the right somehow.   this is very odd since this is a footer is from a master page
    so how can it be moved like that.    I did recently update the map insert, as the old one suddenly had errors in it
    ( like all my embed html code is suddenly not working properly)  I can't understand how an item on a page can 
    move the location of an item  from the master page.   
    http://farandawayfarms.businesscatalyst.com/mapinfo.html
    I have not changed any of these pages for months and everything was ok,  now in the last few days,  
    I have updated my calendar and and map pages and they  are strange.  the calendar is a mess.  the map displays ok,
    but the footer is skewed half way off the page.   
    also the html code in the footer don't display and I have not touched them for a year.  
    thank you for listening to all this.  
    Lynn

  • Encore CS4 menu render error

    Has anybody come across this error:
    Adobe Encore has encountered an error.
    [..\..\Src\VideoFrameManipulators.cpp-478]
    I'm getting it when rendering menus.  If i completely remove the video backgrounds from a project it builds fine.  The video file in question is just a typical AVI DV file.  I created an entire new project only loading in the menus. Render the menus and error pops up again.  I've tried converting the avi to quicktime (for the heck of it) and still get the same problem.  Very frustrating.  I have since done another project with video bgs and had no issues.
    I'm using Vista 64bit.  Q6600 processor, 8GB memory, plenty of hdd space.
    thanks
    Ryan

    Ryan,
    Tell us about your DV-AVI file. Does it have muxed Audio? If so, what format/CODEC for the Audio? What is its Duration? If it's not muxed, does the Duration of any Audio match perfectly (or very slightly shorter - not longer -  than) the Video portion?
    Per Jim's comment, I have used WMV, DV-AVI, MPEG-2 and .MOV AV files, and have not encountered any problems with any of these.
    Last thought, do you have any Button Transition AV files? If so, you need to make sure that the Audio portions for the Motion Menu and the Button Transitions matches.
    Good luck,
    Hunt

  • Opening two workbooks from Menu gives error

    When ever i try to open a workbook from the Menu while another workbook is opened already.
    I get an Business Explorer error saying "<internal error> Calling in to BW server failed"
    I click on OK and then open it second time opens the workbook.
    BW 3.5 Version
    GUI 710
    Thanks,
    Kumar
    Edited by: kumar v on Nov 12, 2009 2:54 PM

    Hi,
    Can some one reply on this thread.
    When ever I try to open a second workbook from the Menu, I get the "<internal error> Calling in to BW server failed"
    Please advise.
    Thanks & Regards,
    Kumar

  • URGENT -  EBP: menu navigation error !!!

    hi everybody,
    Could somebody give me a clue about this ?   I'm just starting my EBP config, but I have an error with the menu navigation (browser - ebp).
    If I click any option on the menu, the main page is loaded again in the inner frame (nested).   So I can't enter to any option, because it loads the main page inside again and again.   =(
    Any clue about this ?
    Thanks so much for your help,
    Regards from Mexico,
    Diego

    Hi Diego,
    the issue I think is that the system cannot resolve the url link for each transaction.
    Are your entries in TWPURLSVR maintained and correct?
    Regards
    Chris

  • Plugin Lab Menu extention error message

    I downloaded the Horizontal Flyout Menu Dreamweaver extension
    and installed it using the extension manager into Dreamweaver MX
    2004. I am using OS X 4.2.8. When I go to
    Inset/PluginLab/Horizontal Flyout Menu, I get an error message
    which states:
    While executing onload, the following Javascript error(s)
    occured: At line 20 of file "Main/Applications:Macromedia
    Dreamweaver MX 2004: Configuration: Commands:
    PL_HorizontalMenu.htm" ReferenceError: PLHFO is not defined.[/]
    Can anyone tell me what this means.

    That .dat file does not exist in my configuration folder or
    anywhere else on my machine.
    The PLHFO folder is in:
    User/Library/Aplication Support/Macromedia/Dreamweaver MX
    2004/Configuration/Shared/PluginLab/Presets.
    The PLHFO.dll file is in:
    User/Library/Aplication Support/Macromedia/Dreamweaver MX
    2004/Configuration/JSExtensions,
    and the PL_HorizontalMenu.htm file is in:
    User/Library/Aplication Support/Dreamweaver MX
    2004/Configuration/Commands folder.

  • Menu Causes Error In Paint

    The application is simple. Draw a circle where the mouse is located.
    Problem 1] If you click on the Menu (<File>) and then drag the mouse back into the window and move around the image becomes distorted.
    To reproduce the error(s). Simple copy the source code. Compile Target.java. Run Target.
    Target.java
    import java.awt.*;
    import java.awt.event.*;
    import java.lang.*;
    import javax.swing.*;
    public class Target extends JFrame implements ActionListener
         private JMenuItem objItemExit;
         public Target()
              super("Target");
              objItemExit= new JMenuItem("Exit");
              objItemExit.addActionListener(this);
              JMenu objMenuFile = new JMenu("File");
              objMenuFile.add(objItemExit);
              JMenuBar objMenuBar = new JMenuBar();
              objMenuBar.add(objMenuFile);
              setJMenuBar(objMenuBar);
              getContentPane().add(new Grid());
              pack();
              setVisible(true);
              addWindowListener(new WindowAdapter() {
                   public void windowClosing(WindowEvent argEvent) {
                        Destructor();
         public void actionPerformed(ActionEvent argEvent)
              if (argEvent.getSource() == objItemExit) {
                   Destructor();
         public void Destructor()
              dispose();
              System.exit(0);
         public static void main(String [] argCommand)
              Target objTarget = new Target();
    }Grid.java
    import java.awt.*;
    import java.awt.event.*;
    import java.awt.geom.*;
    import java.awt.image.*;
    import javax.swing.*;
    public class Grid extends JPanel implements MouseListener, MouseMotionListener
         private int iX;
         private int iY;
         public Grid()
              setPreferredSize(new Dimension(500, 500));
              iX = 0;
              iY = 0;
              addMouseListener(this);
              addMouseMotionListener(this);
         public synchronized int getX()
              return iX;
         public synchronized void setX(int argX)
              iX = argX;
         public synchronized int getY()
              return iY;
         public synchronized void setY(int argY)
              iY = argY;
         public void paint(Graphics argGraphic)
              Graphics2D objGraphic = (Graphics2D)argGraphic;
              int iWidth = getWidth();
              int iHeight = getHeight();
              int iTempX = getX();
              int iTempY = getY();
              // ==========
              // CREATE BUFFER
              BufferedImage objBuffer = (BufferedImage)createImage(iWidth, iHeight);
              Graphics2D objBufferGraphic = objBuffer.createGraphics();
              // ==========
              // FILL BACKGROUND
              objBufferGraphic.setColor(Color.white);
              objBufferGraphic.fillRect(0, 0, iWidth, iHeight);
              // ==========
              // DRAW IMAGE
              objBufferGraphic.setColor(Color.black);
              objBufferGraphic.drawOval(iTempX, iTempY, 10, 10);
              // ==========
              // LOAD BUFFER
              objGraphic.drawImage(objBuffer, 0, 0, this);
         public void mouseClicked(MouseEvent argEvent)
              argEvent.consume();
         public void mouseEntered(MouseEvent argEvent)
              setX(argEvent.getX());
              setY(argEvent.getY());
              repaint();
              argEvent.consume();
         public void mouseExited(MouseEvent argEvent)
              setX(argEvent.getX());
              setY(argEvent.getY());
              repaint();
              argEvent.consume();
         public void mousePressed(MouseEvent argEvent)
              argEvent.consume();
         public void mouseReleased(MouseEvent argEvent)
              argEvent.consume();
         public void mouseDragged(MouseEvent argEvent)
              setX(argEvent.getX());
              setY(argEvent.getY());
              repaint();
              argEvent.consume();
         public void mouseMoved(MouseEvent argEvent)
              setX(argEvent.getX());
              setY(argEvent.getY());
              repaint();
              argEvent.consume();
    }If anyone knows why when you click on the menu and then move around in the window and get distortion it would also be greatly appreciated because I have to add other panels to this window and the distortion over runs them.
    Thanks
    DeltaCoder

    Nope, still not working adding super.paintComponent(argGraphic); to the Grid.java paintComponent(Graphics argGraphic) method.
    Any other ideas?
    (I believe this should be placed in the bug session and hopefully be fixed. I can't see where the code is wrong.)
    DeltaCoder

  • Menu Builder error message

    Hi Guys,
    I am trying to edit an menu screen but each time I try to
    save the changes I get this error message
    "Access Violation at address 00420E1C in module
    'Menubuilder.exe' Read of address 00000008"
    Does anybody have any ideas?, I have tried deleting the menu
    & starting again but still have same problem
    Thanks
    Mark

    Hi Rick
    It seems to happen once I have set the menu up & try to
    edit any of the settings after previewing it, I have found that if
    after getting the message if I reboot my PC, it then allows me to
    go in & change the settings & save them, but as soon as I
    have preview it again, I get the same message if I go back to
    change anything when I try to save the changes. It looks as if
    after the preview Captivate is not releasing all the files, but
    this does not help resolve the problem & I really can't keep
    rebooting my PC when ever I want to change something.
    This is the first time I have used Menu Builder & at the
    moment I am just saving it to my local harddrive. Also once you
    have had the message once you can't save anything till you reboot
    & finally if I don't preview it I can make as may changes as I
    like until I preview.
    Hope this extra info helps
    Mark

  • CS5 drop down menu script errors

    Hello,
    I'm fairly new to flash and actionscript 3. I've started working on a drop down menu and I keep running into the following errors.
    1120: Access of undefined property  Moiveclip.
    1118: Implicit coercion of a value with static type Object to a possibly unrelated type flash.display:DisplayObject.
    Both compiler errors point to this line of code - navBar_mc.setChildIndex(event.target as  Moiveclip, 1);
    Actoinscripting:
    import flash.filters.GlowFilter;
    import flash.events.MouseEvent; var navBtnGlow:GlowFilter = new GlowFilter (0x999999, 0.5, 0, 15, 1, 2, true, false);
    navBar_mc.addEventListener(MouseEvent.MOUSE_OVER, navOverF);
    navBar_mc.addEventListener(MouseEvent.MOUSE_OUT, navOutF); function navOverF(event:MouseEvent):void{
        event.target.filters = [navBtnGlow];
    navBar_mc.setChildIndex(event.target as Moiveclip, 1);
    dropMenus_mc.gotoAndStop(navBar_mc.getChildAt(1).name); }
    function navOutF(event:MouseEvent):void{
        event.target.filters = [];
    any suggestions..?
    I've also included a link the fla file.
    -Jason
    fla file:
    http://www.photorexit.com/menu.zip

    Jesse,
    Thanks for the post and reply.
    I changed the line of code you suggested  - dropMenus_mc.gotoAndStop(navBar_mc.getChildAt(0).name);
    Unfortunaltely I still receive the following report when I rollover the menu button. The menu doesn't drop down either.
    RangeError: Error #2006: The supplied index is out of bounds.
        at flash.display::DisplayObjectContainer/setChildIndex()
        at menu_fla::MainTimeline/navOverF()
    Im not quite sure whats going on with it....?
    At this point im pretty clueless.
    If you have any other suggestions, I'm all ears
    -Jason

Maybe you are looking for