Menu creation program for DW?

As a casualty of Adobe trying to herd us away from GoLive,
I'm biting the bullet and preparing to move all my long-term sites
to DW. Have not worked in it yet, am a little concerned since I'm
so comfortable with GL and its site management.
I iuse the excellent MenuMachine for GL in almost all my
sites. I know that they probably won't make it avaialble for DW.
Is there a comparable one for DW that works as well?
Also, I work in Mac, not PC.
TIA

I'm not familiar with MenuMachine, but you might find a menu
system from
Project VII that will work:
http://www.projectseven.com/products/menusystems/index.htm
The tools are flexible and powerful and very easy to use and
customize.
Their support is absolutely the best.
John
"mrsnak" <[email protected]> wrote in
message
news:fft4ap$33i$[email protected]..
> As a casualty of Adobe trying to herd us away from
GoLive, I'm biting the
> bullet and preparing to move all my long-term sites to
DW. Have not worked
> in
> it yet, am a little concerned since I'm so comfortable
with GL and its
> site
> management.
> I iuse the excellent MenuMachine for GL in almost all my
sites. I know
> that
> they probably won't make it avaialble for DW.
>
> Is there a comparable one for DW that works as well?
> TIA
>

Similar Messages

Best Menu creation program for DW

Just upgraded to CS3 and, consequently, following the herd to
Dreamweaver.
Could anyone recommend a Mac-based menu creation plugin that
might work as well as MenuMachine?

I'm not familiar with MenuMachine, but you might find a menu
system from
Project VII that will work:
http://www.projectseven.com/products/menusystems/index.htm
The tools are flexible and powerful and very easy to use and
customize.
Their support is absolutely the best.
John
"mrsnak" <[email protected]> wrote in
message
news:fft4ap$33i$[email protected]..
> As a casualty of Adobe trying to herd us away from
GoLive, I'm biting the
> bullet and preparing to move all my long-term sites to
DW. Have not worked
> in
> it yet, am a little concerned since I'm so comfortable
with GL and its
> site
> management.
> I iuse the excellent MenuMachine for GL in almost all my
sites. I know
> that
> they probably won't make it avaialble for DW.
>
> Is there a comparable one for DW that works as well?
> TIA
>

What is an easy web-page creation program for use with MacBook Pro?

Can anyone suggest an easy web-page creation program for use with MacBook Pro? I have used FrontPage with my PC, but am changing to a MacBook Pro.

It largely depends on your skill level. Do you want to write web page code, or do you want to just design something and have it turn into a web page automatically?
If you are more of a designer, try these:
RapidWeaver
Freeway Pro
Muse
If you want to write web page code, try these:
Coda
BBEdit
Dreamweaver
If you really don't want to write the code and want the best experience for your viewers, and you want to spend the least amount of time on it, my recommendation is:
No program at all.
Instead, sign up with a web site company like:
WordPress.com (hosted by them) or WordPress.org (hosted on your server)
Squarespace
Wix
The reason is that these companies have fully operational, nicely designed web site templates that you just fill in with your words and pictures, and they are ready to go. They also give you these benefits:
Already designed to the latest web standards
Already designed to resist hackers
Already designed to work on all browsers
Already designed to automatically adjust the page for readability on desktop, laptop, tablet, and smartphone screen sizes
Already designed for accessibility
Already designed for Search Engine Optimization so that your page will be found on Google
Already designed with social media links built in if you want
It is not like the old days where you build a site in Front Page and you assume it will only be seen on a desktop computer. If you build it yourself with a web page program, do you have the knowledge to make a site that works on all of the different web browsers and mobile devices, and is friendly to search engines and social media? If you don't have those skills, working with a website company can be a lot better, faster, and more reliable than trying to hammer all of that out yourself using code in some app.

Is iweb the only web creation program for Mac?

Having just transferred to MBP after years on XP i was wondering what the best web creation program was for the Mac.
I used Frontpage to make my company website but would like to use my MBP to re-create the site and add a couple of new ones.
Can anyone suggest the best way to go?
Cheers
Kev

iWeb can create two different types of Web page.
You can "Publish to Folder" (which will require third party servers) to place these new pages onto the Web.
Or. Publish to .Mac. This requires a .Mac account ($99 a year, U.S.).
You are free to buy, try, and use the other (dozens) of Mac compatible Web page authoring software.
But, if you're publishing to a .Mac account, iWeb 1.1.1 makes it very easy.
The annual .Mac ($99) service also still includes "Homepage".
It offers a simple "Web based" service that can also be used for .Mac users.
Movies, Photo Albums and even Screen savers for other .Mac users.

Filter creation program for pc?

Hello, im looking for a photoshop filter making program for the pc. Ive seen a few But seem to be strickly for mac. I have a art style that I want to make into a filter, if there is no program does anybody know how I can make one in photoshop cs4? any help with this would be great thanks!

there wouldnt happen to be a tut for doing this? ive googled creating a droplet and all im getting is how to
resize a picture. I cant seem to find what im looking for. basically much like how photoshop can distort an image with lets say plastic wrap or the stained glass effect. im trying to see if I can scan an image of my art work in, which is composed of a style of lines. And set this as a filter or someother thing so I can distort the image in that art style. maybe im not understanding what a droplet or action is? just a rough example. here is an older picture of what ive drawn. looks like crap, but its the only one ive got on my comp right now.

User Exists In Sales Order Creation Program for adding "Reason For Reject"

Hi gurus
I have following requriement
As New Sales Order created (VA01) by default or at the time of saving the sale order, perticular "Reason for Rejection" should be set to each line item.
This is then can be removed in change (VA02) with Mass change.
We need this to review the sales order / block sales order from MRP run.
Please let me know how to manage this or is there any user exist for the same.
Thanks
Sunil K

Hi,
As per my knowledge the automatic creation of rejection order is not possible, still will check out and know.
but for urgent use you will have to follow the manual way of changing the line items from OK to blocked for apporoval so you can achieve their not passing on to MRP.
manual way is what is described below:
You can either reject the whole sales document or individual items.
Reject all items:
If you want to reject all the items, choose Reject document in the change modus for the sales document.
The system automatically selects all the items and you can enter a reason for rejection in the following dialog box.
Enter the appropriate reason for rejection and choose Copy.
The system assigns the same reason for rejection to all the selected items.
Reject individual items:
If you only want to reject some of the items, select those items in the item overview screen and choose Edit - Fast change of... - Reason for rejection.
A dialog box appears in which you can enter the appropriate reason for rejection.
Enter the appropriate reason for rejection and choose Copy.
The system assigns the same reason for rejection to all the selected items.
Reject individual items with different reasons of rejection:
If you want to enter different reasons for rejection for the items, choose the Reason for rejection tab page from the overview screen when changing the sales document.
You can enter a different reason for rejection for each item in the Reason for rejection field.
regards,
Siddharth.
Edited by: SD on Mar 15, 2008 10:22 AM

Need to create a mass upload program for appraisal document creation for multiple employee

Hi Expertise,
I need to create a mass upload program for appraisal document creation for manager and his multiple employee
at a time using tcode appcreate.
Please help me out.
Best regards,
Priyaranjan

Hi Priyaranjan,
I think you can take the abap'ers help in creating the program. But u need to provide them the exact functionality and the required specifications in creating the appraisal document.
Even tcode also u can get it prepared by Abap'ers.
Thanks and Regards
Balaji

Need to create a mass upload program for appraisal document creation for multiple employee in abap hr

Hi Expertise,
I need to create a mass upload program for appraisal document creation for manager and his multiple employee
at a time using tcode appcreate.
Please help me out.
Best regards,
Priyaranjan

Hi,
I have done appraisal document creation for bulk using txt file.
this fm used for single for creation in standard tcode (phap_prepare): 'WZ_HRHAP_0DOC_WZ01_START'.
So create ztcode usinh this fm for single form then record BDC for this tcode and called this tcode in that bdc for bulk creation .
While recording for single I have used manual option instead of automatic .

Standard Batch Input Programs for Profit Center Creation

Dear all;
I am in 4.0B version that doesnt have BAPI_PROFITCENTER_CREATE. Writing a BDC for this would be complicated as my data is compiled in a different way.
Are there any Standard Batch Input Programs for Profit Center Creation ?

Hi Srivathsan,
You can make use of Standard BAPI by LSMW.
Business Object   BUS1116      Profit Center Group
Method                CREATE                      Create
Message Type      PROFITCENTERGROUP_CREATE
Basic Type           PROFITCENTERGROUP_CREATE
Regards,
Sivaram.

BAPI or FM or Standard BDC program for Production version creation (C223)

Hi All,
Is there BAPI or FM or Standard BDC program for Production version creation? Please help me.
Thanks & Regards
Santhosh

Hi,
Try this FM "CO_OCM_CREATE_PROD_VERSION"
Regards,
Smart

Is Flash Builder a good beginner program for creation of android app?

Hi there,
I'm planning to create a Android app and I'm searching for the right program to do so. I have absolutly no knowledge about programming, but happen to have Flash Builder as part of the Creative Suite CS6. As I need to learn everything from the complete beginning, I'd like to pick the best program for this purpose, so I don't learn a lot of stuff not be able to achieve the product I'd like. Let me give you a example of what I will try to achieve:
Program for Android:
- first page of the program would be a welcome page, it would be nice to be able to put a login and password option here, but that is not neceserry.
- second page would be a list of 14 options - books - and by clicking on each option I would open a little book (cca 30 pages).
- this option would be nice: let's say I open the third book and stop reading on page 10 and stop/close the program - the next time I open the program it would open the program on that very 10th page of the third book
- this option would aslo be nice: some kind of searching modul to search keywords in the book.
Is this kind of app possible to make in Adobe Flash Builder, or would it be better to learn another program? Thanks a lot for your experiences! Hedvertel

If you have a licence for Master Collection you should have the info about what it contains.
A few moments on Google took me here: http://www.ecostsoftware.com/adobe/adobe-creative-suite-cs6-master-collection-mac_p5565?gc lid=CNzN5MbKmLoCFXDJtAodWDoA3w
The included software is listed. I don't think Muse existed when CS6 was originally released.
I didn't properly read George's answer, but I don't see Muse as a great app builder.
I kind of don't understand at all, why you even answer, if the only thing you are saying in this disucssion is that it's too ambitious and that I'm stupid even asking.
Saying the project is overly-ambitious is a great answer to your question. In post 5 you clearly valued that answer enough as to be giving up on the project.
I didn't say you were stupid asking these questions, it's more a case of asking questions you should be able to answer yourself without too much trouble.
I still think that with your current level of understanding, takling this project with no experience of any programming or web technology is overly ambitious. Start small and build on that.
You don't say why you want to do this particular project - whether it's about learning in general or that project in particular. If it's learning in general there's nothing to stop you - there are a ton of tutorials out there. If it's for this particular project only, I would stop now.
You need to invest a significant amount of time to learn this stuff.
Are you on some design course? Why do you have the master collection?

Need to write BDC program for Transaction VA01(Sales order creation)

Dear Friends,
I need to write a BDC program for uploading data into sap from an excel sheet file. The data contain Material Description,Customer Name,Date of Delivery,Quantity,Unit of measure etc.
material desc customer date of delivery quantity unit of measure
abcdf xyz ltd 24.12.2011 2 4 gm
The transaction is VA01.How will I find the correct fields and related tables? What are the related fields needed in the transaction VA01.
Thanking you
Sacheen Pukhrambam
Moderator Message: Put some self-effort before posting your question. Thread locked.
Edited by: Suhas Saha on Nov 25, 2011 1:25 PM

Hello,
You could try using a BDC with VL04 but first preference would be to see if there are any BAPI functions (search for BAPI) that can do this.
If BUS2032 doesn't have an attribute that you want (eg shipping point) then sub-delegate to ZBUS2032 and add the attribute, it's straightforward. You just have to know how to determine the value programmatically.
regards
Rick Bakker
hanabi technology

What's the best program for making a header containing rollover navigation links?

I have all CS4 programs and I'm looking to make a header that contains an interactive rollover nav bar. I want the bar to be located within the header. What is the best program for creating the header and rollover buttons. I'm aware i could manipulate the images in other programs, but placement and rollover button creation is what I'm looking for. Thanks. I'm thinking maybe flash or fireworks?

Spry can do this for you. See some samples here:
http://labs.adobe.com/technologies/spry/samples/menubar/MenuBarSample.html
Or there are commercially available menu systems from the likes of companies like Project Seven, whom I would personally recommend:
http://www.projectseven.com/

Menu Creation in PE12

Is the menu creation any different in PE12 compared to 11? I was very unhappy with the low resolution DVD menus and Blu-ray (just aweful) menus when creating my own custom menus using my high resolution pictures. Really Adobe is this all you can give us in PE11? Power Director 12 creates beautiful high resolution custom menus but the drawback was interlaced DVD?! I want to use Adobe for progressive DVDs if they can get the menus to look decent. Any help is appreciated.

Christopher_D_303
You wrote
I want to use Adobe for progressive DVDs if they can get the menus to look decent.
I just wanted to make sure that you were talking about AVCHD format burned to DVD disc and not DVD-VIDEO on DVD disc.
All the Premiere Elements 12 burn to have 29.97 or 25 interlaced frames per second frame rates except two under AVCHD DVD, both with 23.976 progressive frames per second frame rate
H.264 1920 x 1080p NTSC Dolby
H.264 1440 x 1080p NTSC Dolby
We aware that the project preset selected to match the properties of your source media will direct the program as to which version of the disc menu .psd sets to make available to you s, w, hd.(standard, standard widescreen, or high definition).
All the s and w psd sets are at Image Size 720 x 576 whether the project is NTSC or PAL. The hd set is typically 1440 x 1080. More on that another time. What is the original pixel dimensions of these photo inserts for the disc menu? What version of Photoshop do you intend to create these menus in?
ATR

How to create program for bapi?

hi all,
how to create program for bapi?
reply me soon now.....
can anybody help me.....
thanks,
S.Suresh.
Title was edited by:
Alvaro Tejada Galindo

Hi ...Here is the step by step procedure for creating BAPIs.
There are 5 different steps in BAPI.
- Create BAPI Structure
- Create BAPI Function Module or API Method.
- Create BAPI object
- Release BAPI Function Module.
- Release BAPI object.
Step1. Creating BAPI Structure:
- Go to <SE11>.
- Select Data Type & Enter a name.
- Click on Create.
- Note: Always BAPI should be in a development class with request number (Not Local Object).
- Select Structure & hit ENTER.
- Enter the fields from your database. Make sure that the first field is the Primary Key Field.
- Then SAVE & ACTIVATE.
Step 2. Creating BAPI module:
- Enter TR.CODE <SE37>.
- Before entering any thing, from the present screen that you are in, select the menu
Goto -> Function Groups -> Create Group.
Enter a name (Note: This name Must start with ZBAPI)
Let this screen be as it is and open another window and there, enter TR.CODE <SE80).
Click on the Third ICON that says Inactive Objects.
Select the group that you just created and click on Activate.
Notice that the group you created will disappear from the list of inactive objects.
- Go back to ><SE37> screen and enter a name and hit <ENTER>. Then enter the group name that you just created and activated.
NOTE: When you release a function module the respective group will be attached to that particular application. It cannot be used for any other application. NEVER include an already existing group that is attached to another module.
Now click on the first Tab that says [ATTRIBUTES] and select the radio button that says remote-enabled module since we will be accessing this from any external system.
Then click on the second tab that says [IMPORT].
Enter a PARAMETER NAME, TYPE and the structure you created in the first step. Also select the check box Pa. All remotely enabled functional modules MUST be Pa enabled, where Pa means Passed by Value and if you dont select Pa, then that means it will be passed by reference..
Then click on tab that says [EXPORT].
Enter the following as is in the first three fields
RETURN TYPE BAPIRETURN (These 3 field values are always same)
Here also select Pa meaning Pass by value.
Note: BAPIRETURN contains structure with message fields.
Then SAVE and ACTIVATE.
Step 3. Creating BAPI object:
- Enter Tr.Code <SWO1> (Note. It is letter O and not Zero).
- Enter a name and then click on create. Enter details.
NOTE: Make sure that that Object Type and Program name are SAME.
- Enter Application M, if you are using standard table Mara. If you are using your own database then select Z at the bottom.
- Then hit <ENTER>.
- Now we have to add Methods. High light METHODS and then select the following from the menu:
Goto Utilities -> API Methods -> Add Methods.
- Enter function Module name and hit <ENTER>.
- Select the second FORWARD ARROW button (>)to go to next step.
- Check if every thing looks ok and again click on FORWARD ARROW button (>).
- Then select YES and click on <SAVE>.
- Now on a different screen goto TR.CODE <SE37>. Enter Function Module name and select from the top menu Function Module -> Release -> Release.
- Goback to TR.CODE <SWO1>.
Here select the menu combination shown below in the same order.
- Edit -> Change Release Status -> Object Type Component -> To Implemented.
- Edit -> Change Release Status -> Object Type Component -> To Released.
- Edit -> Change Release Status -> Object Type -> To Implemented.
- Edit -> Change Release Status -> Object Type -> To Released.
- Then click on <SAVE>.
- Then click on Generate Button (4th button from left hand side looks like spinning wheel).
- Then Click on the button that says PROGRAM to see the source code.
To check if this is present in work flow goto TR.CODE <BAPI>.
Here it shows business object repository.
- First click on the middle button and then select ALL and hit ENTER.
- Goto tab [ALPHABETICAL] and look for the object that you created. This shows that the BAPI object has been created successfully
Overall Info :
http://help.sap.com/saphelp_47x200/helpdata/EN/00/32a43697bc11d1acf9080009b0fb56/frameset.htm
BAPI Creation Info :
http://help.sap.com/saphelp_47x200/helpdata/EN/e0/9eb2370f9cbe68e10000009b38f8cf/frameset.htm
Reference :
http://help.sap.com/saphelp_47x200/helpdata/EN/00/32a43697bc11d1acf9080009b0fb56/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/EN/00/32a43697bc11d1acf9080009b0fb56/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/EN/e0/9eb2370f9cbe68e10000009b38f8cf/frameset.htm

Menu creation program for DW?

Similar Messages

Maybe you are looking for