Menu Fade in Buttons

I need to have the buttons (created in DVDSP4) to fade in 4 seconds after the animated menu plays in (fades in from black, and I don't want to see the buttons before the animation is fully in). I realize there are ways to do this in Motion, but my computer will not open the program for some reason...
I'll tackle that problem later. So what I have are FCP movie files that I am importing and using as animated menus, then creating buttons using the ones provided in Studio Pro.
I am at my wits end trying to figure this one out. If there is no way to do this within Studio Pro without Using Motion for creating buttons let me know so I can move on before I go crazy.
Much appreciated.
P.S. I've done a lot of reading on the Forum about this and haven't found a solution yet, this is my last resort.

Two examples and how to do it
- for Motion when you get it working
http://dvdstepbystep.com/motion.php
- uses Final Cut Pro and shows how to access bits and pieces of DVD SP templates, you will need your own buttons in an overlay and can use the elements from DVD SP if you want to use them
http://dvdstepbystep.com/useelements.php
Buttons will not be active until the loop point and overlays will not be seen
until then. (You cannot control the buttons you drag from the templates otherwise.)

Similar Messages

How to fade out button as menu fades?

I've searched the forums and manual to no avail.
I created a menu that fades to black before jumping to the loop point. Is it possible to fade out the highlighted button as my menu fades to black and jumps to the loop point? Otherwise, the button remains highlighted on screen as the menu fades to black.
I understand how to fade in a button by using Final Cut or Motion and an overlay file, but this of course wouldn't work when fading out a button since the button remains on screen while the video "button" fades out.
Thanks in advance for any advice.

If you add a transition from the menu to the track, such as a dissolve, it should not carry over the highlights - not sure if the button itself is on the highlights. But lets say you have an arrow next to the text that highlights that should not be seen in the transition portion, but it will be abrupt. Also if there is motion after the loop point you will not know when the button is pressed, if it is effectively a still then the fades are smoother.

Classic: will not recharge; apple logo flashes every few seconds then fades away; have tried the 'reboot' advice i.e. move hold switch on and off, hold menu and center button, no success. have tried this many times and kept connected for several hours.

I have a classic, several years old.
It will not recharge; the Apple logo flashes every few seconds then disappears.
I have tried the 'reboot' advice i.e. move the Hold switch on and off, hold the Menu and Center buttons, no success.
I have tried this many times and kept the ipod connected for several hours. And I have tried two different cords, one connected to the desktop computer, one connected to electrical outlet.

Hi enbridge4,
If your iPod Classic won't charge or turn on, you may find the following articles helpful:
Apple Support: iPod won't turn on
http://support.apple.com/kb/ts1383
Apple Support: iPod's battery doesn't charge
http://support.apple.com/kb/ta44551
Regards,
- Brenden

I am trying to burn an iDVD but get message menu contains no buttons. How do I fix this issue?

I am trying to burn an iDVD, but get message menu contains no buttons. How do I fix this issue?

That essentially means that there's been no videos or slideshows added to the project as each of those items will create a button to play. What have you added to the project?
OT

My classic is stuck on a blank screen and it won't connect to any device or reset when I hold the menu and center buttons. Any ideas what's up and how to fix it?

I know click hold on and off then hold the menu and center button until the apple logo appears. I have tried this so many times and my iPod Classic is still unresponsive! I've tried plugging my iPod into my Mac, my wall charger, my ihome, everything, but nothing works. It won't connect to iTunes to restore or anything. I've tried leaving it unplugged long enough to let the battery die and then tried plugging it in, a method I've utilized successfully with other iPods but that didn't work either. I really just starting to lose faith in the quality of this product. The first classic I bought didn't work at all and I had to exchange it. This one I bought to replace my 5 year old nano and it hasn't even lasted 7 months! Somebody please offer me a solution and assure me that I didn't waste $250 on a crap piece of technology. I'm desperate!

Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on.

I have an older iPod that no longer shows up in iTunes or appears to be charging. When I press the Menu and Select buttons, the Apple logo appears and then an icon of a battery with an exclamation point. Is it dead for good?

I have an older iPod that no longer shows up in iTunes or appears to be charging. When I press the Menu and Select buttons, the Apple logo appears and then an icon of a battery with an exclamation point. Is it dead for good?

If it is otherwise working, you can change the battery. If you want to do it yourself, you can buy the part on eBay and other online sources. Just make sure you know the type of iPod you have so that you get the right part.
http://support.apple.com/kb/HT1353
There are online guides, including the ones on this web site
http://www.ifixit.com/Device/iPod
(Note: Most replacement batteries come with plastic/nylon tools seen in the guides.)
You can also have a repair business do the work.
If it is just the battery, if you do a Reset (using the Menu and Select buttons) while it is connect to your computer, I think it should still be recognized by iTunes.

IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Unable to create Menu Item List Buttons in Forms - Not Working!

Hi guys,
I need desperate help since I have been stuck on these for 2 days and I am unable to move forward!!
I am trying to create a pdf form using Acrobat pro 9 and Adobe LiveCycle Designer ES. Since I am new to this, I have been browsing through numerous sites, forums and tutorials to learn about this. So far, I was able to create the forum with text fields, etc.. I am trying to have a column in my pdf form where the users can simply copy & paste image icons here..I was having difficulty with this already and have done numerous searches in google. In the end, I thought I am better off trying to use the "stamp" tool for this instead of image field. So this is what I did:
1) I already placed the image icons (that the users will be copying & pasting) on my pdfs so users can simply click on it to select the image.
2) I added a new bottom to this form which has the short cut to the menu item "copy" function. I labeled this button as 'Copy' and to this button, I added the following javascript for "Mouseup":
app.execMenuItem("CopyFileToClipboard");
3) Next I created another button that I called 'paste' and this button executes the "Paste Clipboard Image as Stamp Tool" menu. This button has the following javascript:
app.execMenuItem("Annots:Tool:StampFromClipboardMenuItem");
I thought that after doing the above, the user should be able to click on one of the images in the pdf, then click on 'copy' button and in the end click on 'paste' button that will then run an action so user can stamp this copied image to where ever they want in that file. But this is not happening!! I dont why?? Nothing happens when these buttons are clicked. I have made sure that the "Extended features in Adobe Reader..." is enabled and also tried running the above javascripts on my console window to test it and i know that the actual javascript code is not at fault since these functions works when I try the code through the debugger window. But I just cannot figure out why these menu item functions are not working when the buttons I had created are clicked!!! I dont know if what I have done is correct or if there is a easier way to achieve what I am trying to do!! Its a shame there is no simpler way for the end-users to copy and paste images to the columns in the pdf forms.
please help me understand why the above button are not working....any help will be great!!

Hi Paul,
This is further to our email correspondence. I am just pasting your email response here since it may be useful to other newbies like me:
"Ok here you go ......I had to add the new row via a script object as the new objects are not completely available until the script ends so I cannot resize the new row from teh current script.
Then when we resize - we have to resize the row, the cells and the image ....we start with all existing subforms then we do it for the new row that was just added.
Lastly I see that you have a delete row button. This will have to be part of the row otherwise we ill not know which row the user will want to delete .....unless you ask them (which is not good UI design)."
I was really impressed the way you modified the script so the table height does not change when new rows are added. That did help me in understanding the methods and it will certainly be v useful to me in the future. I have been practicing and getting a hang of LS and I have actually decided to redesigned my form since it appears that trying to have a fixed table height is quite a bit of work each time a row is added, removed or changed, etc... Your advise so far have been v helpful and it has helped me in redesigned the form into a different layout. So far so good...However, I just have a few more clarifications regarding some hurdles I am facing:
PS: I have emailed you a sample of my new form now so you can have a look at it.
1) Dynamic Image fields:
In this form, I have a subform that has a dropdown list and next to this, I have an image field. I want to change the image based on the selection in the dropdown list. I found a few samples and tutorials on this already and I tried 2 different approach for this. One works and the other doesnt.
Method that works: What I have done here is, I added all the images in the form and have put their presence to invisible. Then using the javascript, I am making the image visible based on the selection in the dropdown list. I found this method somewhere through googling and it works.
Method that doesnt work: Its similar to the above, but instead of putting all the images in the form, I just inserted 1 image field and then tried to change the url of this dynamic image based on the selection in the drop down list. But this method is not working. I tried inserting this jscript and nothing happens:
switch (this.rawValue)
case "1":
myImages.value.Image.href=http://www.mysiteaddress.com/blah_blah.jpg;
break;
case "2":
myImages.value.Image.href=http://www.mysiteaddress.com/blah_blah2.jpg;
break;
The 2nd method does not work. Although I know the method 1 above works and I am currently using it, I am just curious to find out why the 2nd method is not working? Did I get the script wrong or is this feature no longer allowed? I just thought that if the second method works fine, it saves the hassle of putting all the images on the form and then making them hidden. Instead, I just need to put one image field and then dynamically change its image based on the selection. I hope this make sense..please advise..
2) Changing the background colour of the Dropdown list box:
I am trying to change the bg colour of the listbox in the dropdown list object (only the listbox bg color and not the whole background color). So, I added the following script to the mouseEnter event and this works:
var vName = this.somExpression;
var fieldObj = xfa.resolveNode(vName + ".ui.#choiceList.border.fill.color");
fieldObj.value = "255,255,225";
My Problem: The above script works so I dont need to change anything there. But, I also want to add another script to the mouseExit event to change the fill color to its default once the mouse leaves the dropdown lists. Initially, this field has no fill colour and the border fill style is none. The fill color is only added during the mouseEnter event. How do I change the bg color fill back to none during mouseExit after the above script is executed on mouseEnter?
(NOTE: If you see my form, I have used the above scripts for the dropdown list only in "boxSubform[0]".)
3) Changing the length of the Dropdown List box:
I only have about 1.6 inches workspace to add this dropdown list box. However, the length of some lists (list items) in this dropdown list box is actually longer and the remaining part is cut out. So, I added the following script to increase the dropdownlist length and it does not work the way I would have hoped...
The script I have written so far:
I added these to the mouseEnter event and it works fine -
form1.pageSubform.dynamicSubform.Table1.Row1.boxSubform[0].MyDropdown::mouseEnter - (JavaScript, client)
this.w = "2in"; //this is to to increase the width of the dropdown list
I added these to the mouseExit event and it works fine too-
form1.pageSubform.dynamicSubform.Table1.Row1.boxSubform[0].MyDropdown::mouseExit - (JavaScript, client)
this.w = "1.625in";
When I tested the form with the above script, this is what happens:
1) First when you move the mouse over this field, the width increases. Similarly the width decreased when you move away.
2) So, even if this is clicked, the list box is opened with this 2inch width so thats good.
3) There are no problems when the mouse is moved over these list items as well. However, this does not look good when the dropdown list item is clicked with its item lists open and then the mouse leaves this area. In this case, as soon as the mouse leaves this area, the mouseExit script runs and hence it makes the drop down list width to shrink eventhough the list items are still open. How do I resolve this? I was thinking about this and I thought the possible way to overcome this is by writing a javascript for the mouseExit event executing something like this:
if this dropdown list is open,
then this.w = "2in";
else
this.w = "1.625in";
I am not sure how to write a jscript for the above?
(NOTE: If you see my form, I have used the above scripts for the dropdown list in "boxSubform[0]".)
4) Hiding the alternative row shadowing for hidden columns:
If you check out my form, you can notice that I have put the "close" button (button to delete table rows) on the left column and I have also put its presence to "Visible (screen only)". The parent table has got the 'alternative row shadow' checked. What I notice here is, when this page is printed, eventhough the first column's presence is set to "Visible (Screen Only)", it still prints the row shadow for this column and it looks bad. How can I fix this? Any help will be great!
I have already emailed you my new form again so you can have a look.
Thanks again Paul and I cant thank you enough for your help. I am sooo happy to see such a great support and resources available here since it can be a nightmare for some newbies like me... :-)

My IPod was frozen so I held down the Menu and middle button and it went off. Now it's got a dark screen and won't do anything.

My IPod classic was frozen so I followed instructions online and held donw the Menu and middle button and the screen went blank. I now have a dark screen and can't get the IPod to do anything.

Hello Lola51,
I would be concerned as well if my iPod was unresponsive. I found a resource that I think would help in a situation like this.
I recommend following the steps in this troubleshooting assistant:
iPod classic Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/classic/
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

How to fade in and fade out buttons ???

Hi guys I am building a website and I need help to fade in/ fade out buttons. Here is an example :
My main goal is that when I roll over the services button, I want the submenu (corporate and weddings) to fade in. Then when I roll over the portfolio button, I want the first submenu (corporate and weddings) to fade out and the second submenu ( clients, corporate, weddings, etc..) to fade in and to stay like this. Finally when I roll over testimonials, the second submenu fades out. And so on for the rest of the buttons.
FYI, i know how to animate the buttons to fade in/out but i dont know how to make them fade out when i roll over the other buttons.. I know this can be done with action script but I have no clue how...
I have attached my fla and swf.
http://www.habouryentertainment.com/files/site09_help.fla
http://www.habouryentertainment.com/files/site09.flw
Your help would be greatly appreciated !!!
Thanks

Some things you just have to take the time to unravel and learn. It's not difficult/complex, you just have to avoid letting the code overwhelm you by its appearance... instead of looking at pages, look at one page at a time, line by line... take your time and follow a tutorial.
People make tutorials to help those that need to learn, so there's no reason for anyone here to reinvent those wheels for every person that comes along. If you are looking for someone who'll hand you your solved design, sorry, I'm not that guy.

HT3180 struggling to wake my apple tv wont respond even when holding the menu and down button any ideas ?

struggling to wake my apple tv wont respond even when holding the menu and down button any ideas ?

Did you try unplugging the unit from power, leaving it for ten minutes, then plugging in again?
If you have & it didn't work, Damian Smith1 posted this possible solution (I like to give credit where credit is due).
Connect your ATV to your computer and try restoring it to factory setting Use the link below to walk you through the process
Apple TV (2nd generation): Restoring your Apple TV
support.apple.com/kb/HT4367

X6 menu fade effect query

Im wondering if theres anything to disable this...or its just me...i turned off the theme effects already. I just dont like it, i feel like it slows down the fone...im wondering if there could be any future updates on the nokia X6 since the last one was v40? Nokia need to remove this menu fade effect! seriously...

It is not possible to removed it as it is part of the default theme shell.
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Problem: The fade in button/tab refuses to show up

I have a four minute slideshow using two different songs. When the second half with the new song starts up, it is too abruptly loud and I want to do a fade In. Problem is, whereas the grey fade out button appears for at the end of the last clip with the ending of the first song, the grey fade in button refuses to appear at the beginning of the second half with the second song.
I had the same problem with trying to increase the volume of the second half with the new song. The volume adjust handles refuse to show up on the second half of the slideshow with the new song.
Do you have a fix for this?
-L

Hello Matthew,
Related to thread, our custom viewer app has a similar problem that only the latest free issue (published via folio builder website) is appeared, and 3 retail issues (published via folio builder) and other 3 retail issues (published via pre-release content bundler) are disappeared. And purchased 2 retail issues (published via prerelease content bundler) are appeared when logged in with the apple ID used for those 2 retail issued. Please look at my question on the forum 'http://forums.adobe.com/thread/898282?tstart=0'
I've emailed (through the private message tool here) you our contact information including our Gold support contract number.
Please help us to solve this urgent issue, still affecting our magazine app.
Thank you
Yoonho Choi
LPMag Korea _ Ahn-graphics Ltd.
Message was edited by: [email protected]

How do i unfreeze my ipod when ive already tried the menu and select button and that didnt help?

how do i unfreeze my ipod when ive already tried the menu and select button and that didnt help?

How long did you press and hold both the Select (Center) and Menu buttons together? Have you tried doing this procedure more than once? Is the hold switch in the Off position?
If nothing else, let the iPod's battery fully drain. Then charge it back up again.
B-rock

Menu and select button causing ipod to reset

Hi,
Has anyone else had problems with their menu and select buttons causing the ipod to reset itself? As of now, I can't use either of those buttons without it resetting. I've tried using the updater, and I've tried manually resetting it. Any suggestions would be greatly appreciated.
-Sarah

Welcome to Apple Discussions!
Is all the software on your computer and your iPod up to date?
iTunes
iPod Updater
Updating iPod's Software
Have you tried a restore?
Restore the iPod
btabz
PS: I came into this thread thinking I was going to have to explain why holding down Menu+Select at the same time is supposed to cause a reset

Menu Fade in Buttons

Similar Messages

Maybe you are looking for