Menu Help Needed

I exported a FCP file with 5 chapter markers into Studio Pro and used a menu template with 10 marker buttons. Naturally only the five markers I included showed up. Now I had to add two more chapter markers within Studio Pro but they don't show up in the menu. How can I made the late addition markers show?
Thanks.

You folks have been very helpful and I'm sorry to be a pain. It's just that I have to get this finished DVD out by Monday, and I'm used to having a seamless export into Studio Pro's templates and a good quick burn. I've been doing these same steps mechanically for three years and I guess my tutorial memory is foggy. As you suggest, I will go back and do the tutorial again and stop posting stupid questions. But this odd situation was dumped on my by a client on Friday and for now I have one more question...
When I put in the DVD it shows the menu. All the chapter links work (thanks to the help on this forum). If I click back to Root Menu, Chapter 1 begins playing again instead of showing the startup menu, which it does show upon clicking Title Menu.
I need to have the Root Menu button go back to the template. What am I doing wrong??
Thanks, and now I'll get out of your hair.
Thanks for all your help...Gina

Similar Messages

ONKYO TX-SR805 Set-up Menu HELP Needed

This is a LONG post, but I would appreciate if you would read it and respond to it. The settings That are setup might not be the CORRECT settings. If you think a different setting should be made, please let me know.
Also right now I only have 2 front speakers (NHT VT-1A), 1 middle( NHT VT-1C), and a NHT SW12 Subwoofer. I will be hooking up 2 or 4 more speakers for the REAR.
Here are the settings on my TX-SR805 receiver on the set-up menu. I could use some help to see if they need set to something else.
2.2 Speaker Config
      Subwoofer       yes
      Front            70Hz
      Center          90Hz
LPF of LFE        80Hz THX
2.6 THX Audio Setup
       THX subwoofer YES   I don't know if mine is or not
       BGC                    OFF Not sure what this BGC means
3. AUDIO ADJUST
3.1 Tone Control
       Front    Bass      -1dB
                    Treble   +1dB
      Center Base      +2dB
                    Treble   +7db
     Subwoofer Base +7
3.2 DIRECT
      Delay Enable
      DSD                NO   Not sure what DSD is
3.3 MULTIPLEX/MONO
      Multiplex
      Input CH       Main/Sub
      Mono
      Input CH         L+R
      Output Speaker L/R
3.4 PLIIx/Neo:6
        PLIIx Music   (2ch input)
        Panorama        ON
        Dimension       +1
        Center Width    3
Neo: 6 Music
        Center Image   5
3.5 DOLBY EX
        Dolby EX        AUTO
3.6 THEATER-DIMENSIONAL
        Listening Angle   Narrow
3.7 LFE LEVEL
        Dolby Digital      -10dB
        DTS                     -10dB
        Multich PCM      -10dB
        Dolby True HD   -10dB
        DTS-HD Master Audio -10dB
        DSD                     -10dB
4. SOURCE SETUP
       CABLE/SAT
4.1 INTELLIVOLUME     +4Db
   .2 A/V SYNC            0 msec
   .3 NAME EDIT         Blank
5.   LISTENING MODE PRESET
5.1 DVD
       Analog/PCM      NOT SURE WHAT TO SET HERE
       Dolby Digital      NOT SURE WHAT TO PUT HERE
       NOT SURE WHAT TO PUT FOR ANY OF THESE LISTENING MODE PRESET
5.8 TUNER (ANALOG)      Neural THX 5.1 is set on mine. Is this correct?
         CD                           ?
6. MISCELLANEOUS
6. 1 VOLUME SETUP
          Volume Display              Relative
           Muting Level               -40dB
           Maximum Volume       +10dB
           Power on Volume        -22dB
           Headphone Level        +2dB
6.2 OSD SETUP
           Immediate Display       OFF
           Monitor Type              16:9
           Display Position           TOP
7. HARDWARE SETUP
7.4   ANALOG MULTICH
           Subwoofer Input Sensitivity    0
7.5   HDMI
        ALL under here are     ENABLE
Solved!
Go to Solution.

I gave you some answers in your original post. I wish you didn't start a new one. Here is what I posted.
Re: ONKYO TX-SR805 Set-up HELP Needed[ New ]
Options
Mark as New
Bookmark
Subscribe
Subscribe to RSS Feed
Highlight
Print
Email to a Friend
Report Inappropriate Content
01-21-2010 08:24 AM
Unfortunately this is very difficult because the top half of your post, your really the only one that can answer what the setup should be. The adjustments are made based on the acoustics of your room and how everything sounds noone can really give you info on it because every house, and room has different acoustics. The walls, insulation, carpet or bare floors, basement or main floor are just some examples of what can make a difference in sound reproduction.   By the way NHT (Now Hear This) are excellent speakers. For bass and treble, the music I listen too requires a high treble content so I usually have it at 7 out of 10 but my bass is at 4 out of 10.   The sub base should be fine where it is.
Did your receiver come with an Audessy mic for calibration. I would use that for a basic setup and go from there I am not sure if on your unit it will do frequecy but I think it did.
Your volume settings look fine again personal preference there is right or wrong.
For you listening mode Preset you should have an auto setting I am at work so it may take a coule of hours for me to get back to you as I have to go through your manual and see what you would set it up with so please bare with me. I will list the info as I read it so it may not be in the order you have it.
I will have to make a second post since I can't go back and edit this one.

Drop Down menu help needed

Hi, on my site at the checkout page, it has 2 drop down menus, one for country and one for state. right now as it is, if you select United States from the first menu, you are then able to select which state you are from. But if any other country is selected, the Select State drop down menu dissappears. The coding looks like this right now
private function onChange(target:SelectCountryCombo):Void {
switch(target) {
   case _selectCountry:
    if (target.value == 'US')
     _selectState.visible = true
    else
     _selectState.visible = false;
   break;
What i want to do is make it so that if you select canada the drop down menu stays visable, and i've added the provinces into the list. I tried adding 'CA' along with the 'US' but that makes it stay visible for all countries, i only want it visible for the 2. it seems easy but i really dont know action script very well at all. Thanks a lot for any help

I just had another question about the same thing. Is it possible that when CA is selected, that a different data provider for the "Select State" list would come up? For example, if US were selected it would load "_selectState.dataProvider = PayPalStateUSList.instance.option;" but if CA were selected, i could have it load the same thing but with just provinces? i tried to just copy the coding for PayPalStateUSList and rename it PayPalStateCAList with the list changed to provinces, and have it load it in the as but i dont really know what im doing.
right now i just have the states and provinces all in one list, but its just harder to select when everything is all mixed in. it looks a bit unorganized.
another thing i would like to do, is change the total price based on the country selected in the drop down menu, if its possible. right now I have a shipping charge being added to the total from the shopping cart screen (thanks to kglad), but what would make more sence would to have the shipping based on wether its domestic or international. would it be possible to change the total based on the country selected?
these are the last of my questions, after these 2 issues are fixed my site is complete. Thanks for all the help
The coding for the page looks like this (both my concerns are on the same page)
import mx.utils.Delegate;
import kliment.managers.PopUpManager;
import kliment.data.FormField;
import kliment.display.MCC;
import kliment.net.URL;
import kliment.net.URLMethod;
import kliment.net.URLTarget;
import kliment.utils._Object;
import kliment.utils._String;
import as.Application;
import as.Settings;
import as.SimpleButton;
import as.subpage.elements.AgreeCheckBox;
import as.subpage.elements.SelectStateCombo;
import as.subpage.SubpageAbstract;
import as.menu.Menu;
import as.AlertMessage;
import as.shopingcart.PayPalCountryList;
import as.shopingcart.PayPalStateUSList;
import as.subpage.elements.SelectCountryCombo;
import as.subpage.elements.SelectCountryItemRender;
* @author ...
class as.subpage.ViewCheckout extends SubpageAbstract {
private var _IDENTIFIER:String = 'checkout_view';
private var _price_txt:TextField;
private var _f_name_txt:FormField;
private var _l_name_txt:FormField;
private var _email_txt:FormField;
private var _phone_txt:FormField;
private var _city_txt:FormField;
private var _street_txt:FormField;
private var _zip_txt:FormField;
private var _country_cb:FormField;
private var _state_cb:FormField;
private var _selectCountry:SelectCountryCombo;
private var _selectState:SelectCountryCombo;
private var _i_agree_cb:AgreeCheckBox;
private var _proceed_btn:SimpleButton;
public function ViewCheckout() {
super();
private function _init():Void {
_target_mc = MCC.attach(_IDENTIFIER, _host.content_mc);
_page_mc = _target_mc.page_mc;
_price_txt = _page_mc.price_txt;
_price_txt.autoSize = 'left';
_price_txt.text = Settings.CURRENCY + _String.decimalFractions(Application.instance.aSopingCart.totalPrice, 2);
_f_name_txt = new FormField(_page_mc.f_name_txt, 'first_name', _page_mc.f_name_txt.text, true);
_l_name_txt = new FormField(_page_mc.l_name_txt, 'last_name', _page_mc.l_name_txt.text, true);
_city_txt = new FormField(_page_mc.city_txt, 'city', _page_mc.city_txt.text, true);
_street_txt = new FormField(_page_mc.street_txt, 'address1', _page_mc.street_txt.text, true);
_zip_txt = new FormField(_page_mc.zip_txt, 'zip', _page_mc.zip_txt.text, true);
_email_txt = new FormField(_page_mc.email_txt, 'email', _page_mc.email_txt.text, true);
_phone_txt = new FormField(_page_mc.phone_txt, 'night_phone_b', _page_mc.phone_txt.text);
_selectCountry = new SelectCountryCombo(_page_mc.select_country_mc, 'combo_box_list', 'Select a country');
_selectCountry.itemRender = SelectCountryItemRender;
_selectCountry.dataProvider = PayPalCountryList.instance.option;
_selectCountry.addListener(this);
_selectState = new SelectCountryCombo(_page_mc.select_state_mc, 'combo_box_list', 'Select a state');
_selectState.itemRender = SelectCountryItemRender;
_selectState.dataProvider = PayPalStateUSList.instance.option;
_selectState.addListener(this);
_country_cb = new FormField(_selectCountry, 'adress_country', '', true);
_state_cb = new FormField(_selectState, 'adress_state', '');
_proceed_btn = new SimpleButton(_page_mc.proceed_mc);
_proceed_btn.onClick = Delegate.create(this, _onProceedClickHandler);
_i_agree_cb = new AgreeCheckBox(_page_mc.i_agree_mc);
_page_mc.f_name_txt.tabIndex = 0;
_page_mc.l_name_txt.tabIndex = 1;
_page_mc.email_txt.tabIndex = 2;
_page_mc.phone_txt.tabIndex = 3;
_page_mc.zip_txt.tabIndex = 4;
_page_mc.city_txt.tabIndex = 5;
_page_mc.street_txt.tabIndex = 6;
_page_mc._y = 33;
_page_mc._x = 50;
private function onChange(target:SelectCountryCombo):Void {
switch(target) {
   case _selectCountry:
    if (target.value == 'US' || target.value=="CA")
     _selectState.visible = true
    else
     _selectState.visible = false;
   break;
private function _onProceedClickHandler():Void {
var isError:Boolean = false;
var isErrorSelect:Boolean = false;
var message:String = '';
var messageLine1:String = '';
var messageLine2:String = '';
var forSend:Object = new Object();
forSend.cmd = '_cart';
forSend.business = Settings.BUSINESS_EMAIL;
forSend.currency_code = Settings.CURRENCY_CODE;
forSend.upload = 1;
forSend.address_override = 1;
forSend.rm = 2;
forSend.no_shipping = 1;
if (Settings.NOTIFY_URL)
forSend.notify_url = Settings.NOTIFY_URL;
if (Settings.RETURN_URL)
forSend.return_url = Settings.RETURN_URL;
var purchasesList:Object = Application.instance.aSopingCart.getPayPalCarts();
if (!purchasesList) {
   isError = true;
   message += 'The shopping cart is empty.'+newline;
if (_f_name_txt.isValid)
   forSend[_f_name_txt.name] = _f_name_txt.value;
else {
   messageLine1 += ((isError)?', ':'') + String(_f_name_txt.start_value).toLowerCase();
   isError = true;
if (_l_name_txt.isValid)
   forSend[_l_name_txt.name] = _l_name_txt.value;
else {
   messageLine1 += ((isError)?', ':'') + String(_l_name_txt.start_value).toLowerCase();
   isError = true;
if (_email_txt.isValid)
   forSend[_email_txt.name] = _email_txt.value;
else {
   messageLine1 += ((isError)?', ':'') + String(_email_txt.start_value).toLowerCase();
   isError = true;
if (_phone_txt.isValid)
   forSend[_phone_txt.name] = _phone_txt.value;
else {
   messageLine1 += ((isError)?', ':'') + String(_phone_txt.start_value).toLowerCase();
   isError = true;
if (_city_txt.isValid)
   forSend[_city_txt.name] = _city_txt.value;
else {
   messageLine1 += ((isError)?', ':'') + String(_city_txt.start_value).toLowerCase();
   isError = true;
if (_street_txt.isValid)
   forSend[_street_txt.name] = _street_txt.value;
else {
   messageLine1 += ((isError)?', ':'') + String(_street_txt.start_value).toLowerCase();
   isError = true;
if (_zip_txt.isValid)
   forSend[_zip_txt.name] = _zip_txt.value;
else {
   messageLine1 += ((isError)?', ':'') + String(_zip_txt.start_value).toLowerCase();
   isError = true;
if (isError)
   messageLine1 = 'Please enter your ' + messageLine1 + '. ' + newline;
if (_selectCountry.selectedIndex >= 0)
   forSend['country_code'] = _selectCountry.value;
else {
   messageLine2 += ((isErrorSelect)?', ':'') + 'country';
   isError = true;
   isErrorSelect = true;
if (_selectState.selectedIndex >= 0 && _selectCountry.value == 'US')
   forSend['state'] = _selectState.value;
else if (_selectCountry.value == 'US'){
   messageLine2 += ((isErrorSelect)?', ':'') + 'state';
   isError = true;
   isErrorSelect = true;
if (isErrorSelect)
   messageLine2 = 'Please select your ' + messageLine2 + '. ' + newline;
//isError = false;
if (!isError && Boolean(_i_agree_cb.value)) {
   _Object.copyTo(purchasesList, forSend);
   URL.navigate('https://www.paypal.com/cgi-bin/webscr', forSend, URLMethod.POST, URLTarget.BLANK);
   Application.instance.aSopingCart.clear();
   message = 'The purchases are waiting for the payment.'+newline+'The shopping cart is empty.';
   _application.gotoSpash();
} else {
   message += 'You need to accept The Terms of Use to place an order. ' + newline;
message += messageLine1;
message += messageLine2;
new AlertMessage('Info!', message);
public function onResize():Void {

IPhone audiobook menu help needed!

For anyone who doesn't know what Audible.com is audiobook site with iPod, iTunes friendly audio books for much cheaoer than the iTunes Store options, its a great option for those who like audiobooks but dont want to pay a fortune for them
Anyway, back to my problem, well more of an annoyance. :mad:
So, if I have audible books on my iPod they show up in a category separate from all of the other audiobooks, I want them to all show up together.
Please don't respond with, "what does it matter?" Because it doesn't that much but any help would be appreciated. dosen
Thanks

This morning on checking with my 2.0.2 updated iPhone...
The Start Playing Where Left Off is only for Video. So, If you want to be able to resume your audible content it looks like you may need to leave them be.
You can however make them available right from the top menu of iPod on your iPhone!
From the main iPod menu, select More, then Edit from the upper left. Drag the Audiobooks icon down over a button that you don't often use... say Video. The icon you are dragging over will glow and once you let go, it will be replaced with the one you are dragging. You audiobooks might not be listed with all of your music, but you can go straight to them on you iPhone!

Spry Menu Help Needed

I have searched through the forum and did not find an answer
to this question.
I successfully created a horizontal menu using the spry
widget for horizontal menu.
The problem is that in IE, the menu throws the sub menus far
to the right. It functions beautifully in firefox and Safari.
PLEASE HELP!
Thanks!
Attached is the .css file:

The answer to this question is that the spry menu system for
a horizontal menu does not work if you align the top link to the
center. It worked fine when I set it back to the left.
Too bad.

Flash Drop Down Menu Help Needed

I am using this set-up for a drop-down menu:
http://www.flash-menu.net/flash_drop_down_menu/flash_drop_down_menu_component.htm
I'm usign the vertical setup: http://flash-menu.net/flash_drop_down_menu/download_vertical_drop_down_menu_free.htm
I want to put it both on a static html page (for those who do not have FLASH installed), as well as the FLASH site.
This is the site: http://www.miltongordonussenate.com/flash/index.html
I want to put this menu on both the Campaign page, AND the Links page.
I have the seperate parts- the swf file, the html file, and the jscript file. I don't know if I am uploading the seperate files in the wrong place, or if I am just completely off base.
Can someone help me with this, please?

Ok, I see several people have looked, but no one has answered.
Is there a better way to do what I want to do? Any help is appreciated!

Troubleshoting help needed: My iMac keeps crashing and restarting with a report detail: "spinlock application timed out" What can I do to fix this?timed out"

Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Help needed : Extension manager cs6 not listing products

Help needed to Adobe extension manager cs6 to show all my cs6 products
I downloaded Extension manager from here Adobe - Exchange : Download the Adobe Extension Manager
My Computer windows xp 32bit
My Photosop version cs6
My Dreamweaver version cs6
I installed photoshop here : C:\Program Files\Adobe\Adobe Dreamweaver CS6
and my XManConfigfile
<?xml version="1.0" encoding="UTF-8"?>
<Configuration>
    <VariableForExMan>
        <Data key="$sharedextensionfolder">$shareddatafolder/Adobe/Dreamweaver CS6/$LOCALE/Configuration/Extensions</Data>
        <Data key="$dreamweaver">$installfolder</Data>
        <Data key="$dreamweaver/Configuration">$userdatafolder/Adobe/Dreamweaver CS6/$LOCALE/Configuration</Data>
        <Data key="$UserBinfolder">$userdatafolder/Adobe/Dreamweaver CS6/$LOCALE</Data>
        <Data key="NeedOperationNotification">true</Data>
        <Data key="QuitScript">dw.quitApplication()</Data>
        <Data key="SupportedInSuite">CS6</Data>
        <Data key="HostNameForCSXS">DRWV</Data>
        <Data key="ProductVersion">12.0</Data>
        <Data key="Bit">32</Data>
<Data key="DefaultLocale">en_US</Data>
</VariableForExMan>
</Configuration>
Extension manager installed here : C:\Program Files\Adobe\Adobe Extension Manager CS6
Photoshop Installed here: C:\Program Files\Adobe\Adobe Photoshop CS6
and my XManConfigfile
<?xml version="1.0" encoding="UTF-8"?>
<Configuration>
    <VariableForExMan>
        <Data key="EmStorePath">$SharedRibsDataFolder/Adobe/Extension Manager</Data>
        <Data key="$photoshopappfolder">$installfolder</Data>
        <Data key="$pluginsfolder">$photoshopappfolder/Plug-Ins</Data>
        <Data key="$presetsfolder">$photoshopappfolder/Presets</Data>
        <Data key="$platform">Win</Data>
        <Data key="$actions">$presetsfolder/Actions</Data>
        <Data key="$blackandwhite">$presetsfolder/Black and White</Data>
        <Data key="$brushes">$presetsfolder/Brushes</Data>
        <Data key="$channelmixer">$presetsfolder/Channel Mixer</Data>
        <Data key="$colorbooks">$presetsfolder/Color Books</Data>
        <Data key="$colorrange">$presetsfolder/Color Range</Data>
        <Data key="$colorswatches">$presetsfolder/Color Swatches</Data>
        <Data key="$contours">$presetsfolder/Contours</Data>
        <Data key="$curves">$presetsfolder/Curves</Data>
        <Data key="$customshapes">$presetsfolder/Custom Shapes</Data>
        <Data key="$duotones">$presetsfolder/Duotones</Data>
        <Data key="$exposure">$presetsfolder/Exposure</Data>
        <Data key="$gradients">$presetsfolder/Gradients</Data>
        <Data key="$huesat">$presetsfolder/Hue Sat</Data>
        <Data key="$imagestatistics">$presetsfolder/Image Statistics</Data>
        <Data key="$keyboardshortcuts">$presetsfolder/Keyboard Shortcuts</Data>
        <Data key="$layouts">$presetsfolder/Layouts</Data>
        <Data key="$lenscorrection">$presetsfolder/Lens Correction</Data>
        <Data key="$levels">$presetsfolder/Levels</Data>
        <Data key="$liquifymeshes">$presetsfolder/Liquify Meshes</Data>
        <Data key="$menucustomization">$presetsfolder/Menu Customization</Data>
        <Data key="$optimizedcolors">$presetsfolder/Optimized Colors</Data>
        <Data key="$optimizedoutputSettings">$presetsfolder/Optimized Output Settings</Data>
        <Data key="$optimizedsettings">$presetsfolder/Optimized Settings</Data>
        <Data key="$patterns">$presetsfolder/Patterns</Data>
        <Data key="$reducenoise">$presetsfolder/Reduce Noise</Data>
        <Data key="$replacecolor">$presetsfolder/Replace Color</Data>
        <Data key="$scripts">$presetsfolder/Scripts</Data>
        <Data key="$selectivecolor">$presetsfolder/Selective Color</Data>
        <Data key="$shadowhighlight">$presetsfolder/Shadow Highlight</Data>
        <Data key="$smartsharpen">$presetsfolder/Smart Sharpen</Data>
        <Data key="$styles">$presetsfolder/Styles</Data>
        <Data key="$textures">$presetsfolder/Textures</Data>
        <Data key="$tools">$presetsfolder/Tools</Data>
        <Data key="$variations">$presetsfolder/Variations</Data>
        <Data key="$webphotogallery">$presetsfolder/Web Photo Gallery</Data>
        <Data key="$workspaces">$presetsfolder/Workspaces</Data>
        <Data key="$zoomify">$presetsfolder/Zoomify</Data>
     <Data key="$hueandsaturation">$presetsfolder/Hue and Saturation</Data>
     <Data key="$lights">$presetsfolder/Lights</Data>
     <Data key="$materials">$presetsfolder/Materials</Data>
     <Data key="$meshes">$presetsfolder/Meshes</Data>
     <Data key="$rendersettings">$presetsfolder/Render Settings</Data>
     <Data key="$volumes">$presetsfolder/Volumes</Data>
     <Data key="$widgets">$presetsfolder/Widgets</Data>
        <Data key="$localesfolder">$photoshopappfolder/Locales</Data>
        <Data key="$additionalplugins">$localesfolder/$LOCALE/Additional Plug-ins</Data>
        <Data key="$additionalpresets">$localesfolder/$LOCALE/Additional Presets</Data>
        <Data key="$localeskeyboardshortcuts">$localesfolder/$LOCALE/Additional Presets/$platform/Keyboard Shortcuts</Data>
        <Data key="$localesmenucustomization">$localesfolder/$LOCALE/Additional Presets/$platform/Menu Customization</Data>
        <Data key="$localesworkspaces">$localesfolder/$LOCALE/Additional Presets/$platform/Workspaces</Data>
        <Data key="$automate">$pluginsfolder/Automate</Data>
        <Data key="$digimarc">$pluginsfolder/Digimarc</Data>
        <Data key="$displacementmaps">$pluginsfolder/Displacement Maps</Data>
        <Data key="$effects">$pluginsfolder/Effects</Data>
        <Data key="$extensions">$pluginsfolder/Extensions</Data>
        <Data key="$fileformats">$pluginsfolder/File Formats</Data>
        <Data key="$filters">$pluginsfolder/Filters</Data>
        <Data key="$imagestacks">$pluginsfolder/Image Stacks</Data>
        <Data key="$importexport">$pluginsfolder/Import-Export</Data>
        <Data key="$measurements">$pluginsfolder/Measurements</Data>
        <Data key="$panels">$pluginsfolder/Panels</Data>
        <Data key="$parser">$pluginsfolder/Parser</Data>
     <Data key="$3dengines">$pluginsfolder/3D Engines</Data>
        <Data key="$lightingstyles">$pluginsfolder/Filters/Lighting Styles</Data>
        <Data key="$matlab">$photoshopappfolder/MATLAB</Data>
        <Data key="UserExtensionFolder">$photoshopappfolder</Data>
        <Data key="$photoshop">$UserDataFolder/Adobe/Adobe Photoshop CS6/Configuration</Data>
        <Data key="DisplayName">Photoshop CS6 32</Data>
        <Data key="ProductName">Photoshop32</Data>
        <Data key="FamilyName">Photoshop</Data>
        <Data key="ProductVersion">13.0</Data>
        <Data key="IconPath">Configuration/PS_exman_24px.png</Data>
        <Data key="SupportedInSuite">CS6</Data>
        <Data key="HostNameForCSXS">PHSP</Data>
        <Data key="Bit">32</Data>
    </VariableForExMan>
</Configuration>
                                                                    Please someone help me i cant install any photoshop extension because of this issue,,,

Waiting for your reply ...thanks
Here is the results
I installed photoshopcs6 illustrator cs6 dreamweaver cs6 illustrator cs6 in the system , But nothing seems
Result: BridgeTalk Diagnostics
Info:
Name = estoolkit-3.8
Status = PUMPING
Path
Version = 2.0
Build = ES 4.2.12
Next serial number = 40
Logging: = OFF
Now = 15:55:49
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 55ms
Last pump = 62ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=0ms, left=16ms
Timeout = undefined
Handler = undefined
Instances: 3
estoolkit-3.8#dbg:
msg[15:55:49]: 00000035
@BT>Version = 2.05
Target = estoolkit-3.8#dbg
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:win3788
Timeout = 15:55:50
Type = Ignore
Response-Request = Timeout
Headers = (no headers)
Timestamp = 15:55:49
Serial-Number = 35
Received = undefined
Result = undefined
Error = undefined
Body = (empty)
Incoming: 1
Outgoing: 0
Handler: 9
ExtendScript = for all messages
Error = for only msg #25
Error = for only msg #27
Error = for only msg #31
Result = for only msg #35
Error = for only msg #35
Timeout = for only msg #35
Result = for only msg #37
Error = for only msg #37
estoolkit-3.8#estk:
msg[15:55:49]: 00000037
@BT>Version = 2.05
Target = estoolkit-3.8#estk
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:win3788
Timeout = 16:05:49
Type = Debug
Response-Request = Result Error
Headers = (no headers)
Timestamp = 15:55:49
Serial-Number = 37
Received = undefined
Result = undefined
Error = undefined
Body: 107 bytes
Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/>
Incoming: 1
Outgoing: 0
Handler: 1
ExtendScript = for all messages
estoolkit-3.8: (main)
Incoming: 0
Outgoing: 0
Handler: 1
ExtendScript = for all messages
Targets: 1
Connector = PCD
Installed: 0
Running: 0
exman-6.0:
Path = C:\Program Files\Adobe\Adobe Extension Manager CS6\Adobe Extension Manager CS6.exe
Display Name = Adobe Extension Manager CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.exman
Status = (not running)
ExeName = Adobe Extension Manager CS6.exe
Installed: 1
Running: 0
Groups = (no groups defined)

Help Needed with showMessageDialog in awt

Yes! I'm back with another problem. I'm trying to use showMessageDialog for my about popup. But, all the examples I have looked at use with Swing. I did see in the tutorials that this could work in java.awt.dialog. But, that doesn't seem to be in the docs, though. Anyway, below is my attempt at inserting showMessageDialog in my code. I'm receiving 2 compile errors on the line of code. Can anyone tell me where I have gone wrong?
import java.io.*;
import java.awt.*;
import java.awt.event.*;
class ChatClient extends Frame
   private TextField tf1 = new TextField("", 50);
    private TextArea ta;
    private Button sendButton;
    private Button quitButton;
    private Button okButton;
    private MenuItem exitMT, aboutMT;
    private Choice choice;
    private String user;
   public ChatClient()
       super("ChatClient");
      addWindowListener(new WindowAdapter()
      {public void windowClosing(WindowEvent e) {System.exit(0); }});
        addWindowListener(new WindowAdapter()
      {public void windowActivated(WindowEvent e)
                tf1.requestFocusInWindow();
     setTitle("Chat Room");
      Panel p = new Panel(new BorderLayout());
      Panel p1 = new Panel(new BorderLayout());
      Panel p2 = new Panel(new GridLayout(3,1));
      MenuBar mb = new MenuBar ();
      setMenuBar (mb);
      Menu fileMenu = new Menu ("File");
     mb.add(fileMenu);
    Menu helpMenu = new Menu ("Help");
      mb.add(helpMenu);
      fileMenu.add (exitMT= new MenuItem ("Quit"));
     helpMenu.add (aboutMT = new MenuItem ("About"));
     exitMT.addActionListener(new ExitCommand());
      aboutMT.addActionListener(new AboutCommand());
   //creating main panel
   add(p, BorderLayout.NORTH);
      ta = new TextArea(10, 50);
      add(ta, BorderLayout.CENTER);
      ta.setSize(500,300);
      ta.setEditable(false);
    //adding buttons and choice box to the right side of the window
      sendButton = new Button("Send");
      Panel p3 = new Panel();
      sendButton.setSize(15,15);
      sendButton.setBackground(Color.green);
      p3.add(sendButton);
      p2.add(p3);
     sendButton.addActionListener(new CopyCommand());
    quitButton = new Button("Quit");
     Panel p4 = new Panel();
    quitButton.setSize(15,15);
     quitButton.setBackground(Color.red);
     p4.add(quitButton);
     p2.add(p4);
    quitButton.addActionListener(new ExitCommand());
     Panel p5 = new Panel();
    choice = new Choice();
    choice.addItem("John");
    choice.addItem("Jena");
    choice.addItem("Colleen");
    choice.addItem("Steve");
    user=choice.getItem(0);
    p5.add(choice);
    choice.addItemListener(new CopyCommand());
    p2.add(p5);
     add(p2, BorderLayout.EAST);
   //adding the textfield to the south end of the window
      p1.add(tf1);
      add(p1, BorderLayout.SOUTH);
      tf1.addActionListener(new CopyCommand());
//handling ActionEvent from buttons and menu items
class ExitCommand implements ActionListener
    public void actionPerformed (ActionEvent e)
               tf1.setText("");
              ta.setText("");
              choice.select(0);
              System.exit(0);
class AboutCommand implements ActionListener
     public void actionPerformed (ActionEvent e)
         OptionPane.showMessageDialog(OptionDialogFrame.this, "ChatClient ver. 1.0 written by Jennifer McAuliffe", "About Screen");
         System.out.print("About menu was pressed!");
class CopyCommand implements ActionListener, ItemListener
    public void itemStateChanged(ItemEvent e)
    { if (e.getSource() instanceof Choice)
        user = (String)e.getItem();
    public void actionPerformed (ActionEvent e)
        ta.append(user + ": " + tf1.getText() + "\n");
          tf1.setText("");
            tf1.requestFocus();
     public void keyPressed (KeyEvent ke)
         //figure out if the enter key was pressed
         if (ke.getKeyCode() == KeyEvent.VK_ENTER)
     ta.append(user + ": " + tf1.getText() + "\n");
     tf1.setText("");
     tf1.requestFocus();
     public void keyTyped (KeyEvent ke) { }
     public void keyReleased (KeyEvent ke) { }
   public static void main(String[] args)
   { Frame f = new ChatClient();
      f.setSize(600, 400);
      f.show();
}

they aren't really stupid questions, you need to rely on the api to know exactly what classes you are using and the methods available. here is a really crude example that might give you some ideas. it could use lots of improvements.
import java.awt.*;
import java.awt.event.*;
class DialogExample extends Frame
     public static void main(String[] args)
          Frame f = new Frame();
          //f.setVisible(true);
          Dialog d = new Dialog(f,"About Screen", true);
          d.add(new Label("ChatClient ver. 1.0 written by Jennifer McAuliffe"));
          d.addWindowListener(new WindowAdapter(){
               public void windowClosing(WindowEvent we) {
                       ((Dialog)(we.getSource())).setVisible(false);
          d.pack();
          d.setLocationRelativeTo(null);
          d.setVisible(true);
          d.dispose();
          System.exit(0);
}

Help need to switch Muse site to BC on a allready hosted plan

Hi, i also posted on BC forum...
I have a client that was in a hurry to have his emails accounts before the entire website.
So i went on and bought the email marketing plan (cos he will also need to do email campains) an pointed his domain everything is working fine, at this moment he has his accounts the domain is live.
The site would be just a small 7-10 pages not to complicated.
Has a graphic designer (who has venture into Business catalyst cos it had all the solutions i needed, well that's what the promotional videos said anyway) I made a site in Muse.
First i did a temporary page thats says "comming soon", and then i made the entire site, all the design and menu but with blank pages cos the client didnt have all the content yet (and still dont have). I uploaded that site to a sub directory so he could see the evolution.
He approved the design, yay!
At the end of the process, he told me he needed to have full control with the editor. (style, images, bulleted list, need to put downloadable document like pdf etc.) i told him that he could only modify what was allready there with the Muse in Browser editing (that he saw when i made the pitch using another site) he was impress with the way it worked.
so i told him i would have to remake "template".
I thought of using a BC template, and modify the looks to adapt to my client image, Of course, use a responsive theme so he could make the change at one place only. (cos in Muse you need to make the changes on the 3 layouts).
Now, i created a new temporary site using one of the new responsive template available.
How can i import that new site onto his live domain? In other words, how can a switch from a theme made in Muse, to a BC template?
cant i just delete everything in the root folder, and upload the entire new site via ftp?
please help me find the solution. i am a bit in a panic here
hope you could understand my lousy English.
Sincerely,
i.d.

This would need to be transparent for m'y client...
Y
Envoyé de mon iPhone
Le 2014-04-20 à 15:29, Sanjit_Das <[email protected]> a écrit :
Re: help need to switch Muse site to BC on a allready hosted plan
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Thanks for additional details.
Unfortunately we cannot change site template of a live site in BC , but as a workaround Create a site from BC using the template you wish to use then publish the site from Muse to the site created from BC and transfer the contents stored from live site to trial site. Ater final transition is done , you can delete the already paid site and make live the new trial site which includes new site template.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6314730#6314730
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6314730#6314730
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6314730#6314730. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Help needed for dynamic update form

I could really use some advice - I've been asked to build a time tracking application (basically a timesheet) and I have a fair bit done but the part I am really struggling with is the best way to accommodate some of the specifications. I am NOT a programmer (I have some coldfusion experience but nothing really advanced) so I have not managed to sucessfully integrate the various methods I've found on the web so far. The database is created and so are all the queries, and I have also written a cfc to handle the drop-down menu logic needed but I don't really know how to integrate it with the form.
Our production server has ColdFusion MX7 so all the great functionality in the CF8 examples I can't use.
The issue is the user should ideally be able to add/edit/delete multiple rows at once- I like CFGRID, and the HTML version seems best. The main issue with the Flash version is the scrolling to get to the insert/delete buttons- I couldn't see how to get rid of that. A separate add and edit form could be ok depending on how easy it is to use.
One problem I have is that I can't work out how to have default values with the grid (the userID which is a session variable, and the date which is constantly changing- there is a cfcalendar for the user to change date).
The biggest hurdle is the related select drop-downs I need- it's not quite as simple as the city,state,postcode examples. For the first drop down the pick an option- and for only 2 of those options there is a second drop-down. Anything else and it stops there. For the second drop-down, there are 2 options, and depending on which one of these they pick the 3rd drop-down pulls a query from one or another table in the database (2 entirely different things). The three options have different database tables. The main timesheet table just stores the id number from those tables (so I also need to display the names on the drop-down from the options tables not the number).
I played with simple and complicated javascript and coldfusion solutions as well, but because it's a form to update records and also because of the above specs I just couldn't get anything to work right. I tried binding with the cfc and nothing would bind, plus I don't know how to make all happen without a page reload.
Does anyone have any advice for the best approach to this? As I mentioned I've got tables, queries and even a cfc but I'm not too clear on how to put it all together properly within the constraints of MX7.
PS I also can't post a lot of code because of where I work- I know that's not helpful but am looking for the best approach to this, then I can work on the details. Right now I am jumping from solution to solution and not getting anywhere.

Well, a lot of code has come and gone because I couldn't make it work, where I'm currently at is:
<cfform name="updateform" id="updateform" action="#CurrentPage#?#CGI.QUERY_STRING#">
<cfgrid name="MainData" height="400" insertbutton="add" deletebutton="remove" query="getMainData" insert="yes" delete="yes" rowheight="20" selectmode="edit" format="html">
<cfgridcolumn name="id" display="no">
<cfgridcolumn name="userID" display="no">
<cfgridcolumn name="entrydate" display="no">
<cfgridcolumn name="activityID" >
<cfgridcolumn name="typeID">
<cfgridcolumn name="projectID" values="#ValueList(getProjects.id)#" valuesdisplay="#ValueList(getProjects.name)#">
<cfgridcolumn name="time" width="10">
<cfgridcolumn name="comment" width="150">
</cfgrid>
<cfinput type="hidden" name="entrydate" value="#Session.username#">
<cfinput type="hidden" name="entrydate" value="#editdate#">
<cfinput name="update" type="Submit" value="Update">
</cfform>
** for some reason getProjects.name doesn't work and causes an error. I haven't worked out how to get the default inputs for the date and user ID to work either. I also tried binding and a flash form somewhere along the way.
** the CFC is below, #ds# didn't work and I had to put in the actual DSN name, not sure why, but anyway this is the logic of the thing. Ideally I would like to use this logic with the cfgrid, but I'm not sure if that is possible? It seems like it would be the most user friendly approach.
The CFC so far is:
<cfcomponent>
   <cffunction name="getActivities" access="remote" returnType="query">
        <cfquery name="getActivities" datasource="#ds#">
SELECT * FROM timesheet_activities
</cfquery>
        <cfreturn getActivities>
    </cffunction>
    <cffunction name="getTypes" access="remote" returnType="query">
    <cfargument name="Activity" type="any" required="true">
    <cfif ARGUMENTS.Activity EQ "">
        <cfset getType = "">
    <cfelse>
        <cfquery name="getTypes" datasource="#ds#">
        SELECT * FROM timesheet_type
        </cfquery>
    </cfif>
    <cfreturn getTypes>
    </cffunction>
    <cffunction name="GetProjects" access="remote" returnType="query">
    <cfargument name="Activity" type="any" required="true">
    <cfargument name="Type" type="any" required="true">
    <cfif ARGUMENTS.Activity EQ "" OR ARGUMENTS.Type EQ "">
        <cfset LstProjects = "">
    <cfelseif ARGUMENTS.Activity EQ "1" OR "3">
    <cfquery name="getProjects" datasource="#ds#">
SELECT id,name FROM projectsa
WHERE completed = 'false'
</cfquery>
<cfelse>
<cfquery name="getEProjects" datasource="#dse#">
SELECT id,name FROM projectsb
WHERE statusID = '6'
</cfquery>
    </cfif>
    <cfreturn getProjects>
    </cffunction>
</cfcomponent>
Any attempts to actually use the cfc didn't work. I tried to use it with a normal html update form and got the message- failed to bind, Activity didn't exist. I also tried to bind it to a flash grid. The argument for Activity needs to come from the drop-down Activity type selected. Maybe I'm missing something.
ETA:
just moved everything to the live MX7 server (because my dev server is Coldfusion8) and I get the following:
Attribute validation error for tag CFGRID. The tag does not allow the attribute(s) BINDONLOAD,BIND.
Does this mean I definitely can't use the CFC with the cfgrid on MX7? Or is there a way to do it?
Any advice would be greatly appreciated.

Help need my mac pro for school..it has Grey screen..spinning wheel...repaid disk ok...repair disk permission all repaired but one warning...

Help need my mac pro for school..it has Grey screen..spinning wheel...
I think I have mountain lion OS X....I have done I think almost every suggestion I've seen in discussion boards.
Boot in recovery repaired disk...ok...repair disk permission...all repaired but one warning...I've tried to reinstall lion (without losing data) and it Got all the way to one minute to be done and then the time change back two hours and kept doing this all night long. I haven't done a back up due to no external for time machine.
I hope someone can please help me I've been going crazy for a week now trying to figure this out. I use my computer for school and I'm currently very behind from in my school work thank you
Also I've checked my available space 424.91 free of 750 gigs....disk is verified

Welcome to the Apple Support Communities
Try holding the Shift key while your Mac is starting to start into safe mode. Then, after starting in safe mode, open Finder, select Go menu (on the menu bar) > Go to Folder, and type /Library/StartupItems. Then, empty this folder and restart the Mac.
If your Mac starts after doing this, it was a problem with a third-party app that starts automatically when you turn on the computer. It won't start automatically anymore after doing that

Help needed with header and upload onto business catalyst

Can someone help with a problem over a header please?
I have inserted a rectangle with a jpeg image in background, in the 'header' section, underneath the menu. It comes up fine on most pages when previsualised, going right to the side of the screen, but stops just before the edge on certain pages. I have double checked that I have placed it in the right place in relation to the guides on the page.
That's one problem.
The second problem is that I tried to upload onto business catalyst, which got to 60% and refused to go any further, saying it couldn't find the header picture, giving the title and then u4833-3.fr.png. The picture is in the right folder I have double checked. And it isn't a png. Does it have to be ?
And the third problem is that I got an email following my upload from business catalyst in Swedish. I am living in France.
Can anyone help ? Thanks.

Thanks for replying,
How can I check the preview in other browsers before I publish a provisional site with BC?
The rectangle width issue happens on certain pages but not others. The Welecom page is fine when the menu is active, also the contact page, but others are slightly too narrow. Changing the menu spacing doesn’t help - I was already on uniform but tried changing to regular and back.
In design mode the rectangle is set to the edge of the browser, that’s 100%browser width right?
Re BC I have about 200 images on 24 different pages and it seems to be having difficulty uploading some of them. But it has managed a couple I named with spaces but not others I named with just one name.
Is there an issue on size of pictures ? If I need to replace is there a quick way to rename and relink or do I have to insert the photos all over again?
I’m a novice with Muse with an ambitious site !
Thanks for your help.
Mary Featherstone
Envoyé depuis Courrier Windows
De : Sanjit_Das
Envoyé : vendredi 14 février 2014 22:15
À : MFeatherstone
Re: Help needed with header and upload onto business catalyst
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Hi
Answering the questions :
- Have you checked the preview in Muse and also in other browsers ?
- Does the rectangle width issue happens when menu is active , or in any specific state , Try to change the menu with uniform spacing and then check.
- In design view the rectangle is set to 100% browser width ?
With publishing :
- Please try to rename the image file and then relink
- If it happens with other images as well , see if all the image names includes strange characters or spaces.
- Try again to publish
With e-mail from BC :
- Under preferences , please check the country selected.
- If you have previously created partner account in BC and selected country and language then it would follow that, please check that.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6121942#6121942
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6121942#6121942
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6121942#6121942. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Help Needed - Even after lodging "Presidential Complaint"

Help needed please!!To make a long story short I have been through nothing but aggravation the past week trying to get my phone working. Service call on 7/6 to install Fios Internet, TV and phone. Internet and TV work fine, but Phone has no dial tone, going on a week and a half now. Tried contacting the account rep who set up my account, her supervisor as well as tech support on numerous occassions.
They set a dispatch for yesterday, and when the tech called me to say he was here, he was at an address i moved out of 4 years ago, in another state.I get a call from someone saying the service request was being closed and I need to call in with the correct address, after telling that rep I would not do that, that Verizon should make the updates based on my TV/Internet records, she hung up on me. Called back into Tech Support and the best they could do was an appointment for tomorrow. I then called the Corporate number and spoke with someone who opened a "Presidential Complaint" and requested an expedited call.. well i have heard nothing since then other than an automated call earlier today sayin my original service request will be kept. Needless to say I'm very upset that after a week and a half I still have no phone service and it doesn't seem like anyone is real willing to help me. I'm sure I'll get billed in full even though one of the 3 services I'm paying for hasn't been working in a week and a half..

Hi jkoen77,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

Messaging:System Error(-10)HELP NEEDED!NEED BEFORE...

Messaging: System Error(-10) [Nokia N70] URGENT HELP NEEDED! - NEEDE BEFORE WED 21ST MAY '08 - BUT HELP OTHERWISE APPRECIATED!______________________________
Hey,
I need this help before Wednesday 21st May 2008 as I am going abroad and urgently need my phone. I have had my phone for just over a year now and I have never had any problems with it up until now.... Think you can help...?
This is the scenario. My messages are saved under my nokia N70's MMC memory card and when I get a message there are a number of problems.
1) My phone does not vibrate or alert me when a message comes in. I have checked my profile settings and they are all up to volume.
2) When the messages come through they are not displayed on the main window of the phone as "1 New Message Received" but in the top corner with a little envelope icon. I know the icon normally comes up but the "1 New messge received part doesn't come up.
3)When "1 New Message Reveived" is not displayed on the main window I go into the "INBOX". When I click inbox on "Messaging" the phone displays an error saying: Messaging: System Error(-10) with a red exclamaion mark. The I can not write any messages, view sent, or drafts.
I have tried to change me message settings by going on "Messaging"> Left Click "Settings" > "Other" > "Memory in use" and selected "Phone Memory". This works but then my I looses all my previous messages.
4)My phone is also dead slow. I click menu and it takes at least five minutes to load menu.
IF YOU COULD HELP ME ON ANY OF THESE ISSUES I WOULD BE MAJORLY GREATFUL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thanks Soo Much,
Robert__________

U said in another post u've tried all my solutions = =?
On that post its for Nokia N95 u kno? Although the problem is similar, but different phone model can lead to quite different solutions.
Are u sure u tried all my solutions?
have u tried this?:
/discussions/board/message?board.id=messaging&message.id=7926#M7926
Also format ur memory card, do not use content copier! dont install too much softwares, as ur phone model is old and doesnt have much space.
This is from NOkia, sometimes does work depending on ur situation:
Memory low
Q: What can I do if my device memory is low?
A: You can delete the following items regularly to avoid
memory getting low:
• Messages from Inbox, Drafts, and Sent folders in Messaging
• Retrieved e-mail messages from the device memory
• Saved browser pages
• Images and photos in Gallery
To delete contact information, calendar notes, call timers, call cost timers, game scores, or any other data, go to the respective application to remove the data. If you are deleting multiple items and any of the following notes are shown: Not enough memory to perform operation. Delete some data first. or Memory low. Delete some data., try deleting items one by one (starting from the smallest item).
use device status http://handheld.softpedia.com/get/Desktop-and-Shell/Windows/Nokia-Device-Status-57673.shtml
to maybe let me see what u got on ur phone (by saving/exporting report).
Make sure u have the latest firmware! Updating firmware is like a hard reset but also upgrade.
Message Edited by goldnebula on 20-May-2008 02:05 PM

Menu Help Needed

Similar Messages

Maybe you are looking for