Menu just stopped working

Yesterday my main menu just stopped working. You can see the top of the drop shadow for the flyouts but for the life of me I can't make the flyouts show again. I tried pushing multiple back up copies of the site that I had and nothing help. Anybody have any suggestions?
www.yarbroughsmusic.com

Actually fixed it not to long ago. Was just coming here to mark as fixed! Thanks for your time!

Similar Messages

My New iPod nano 6g, just stop working the screen is freezd in the menu? Pleace HELP!!!

My New iPod nano 6g, just stop working the screen is freezd in the menu? Pleace HELP!!!

try resetting. Hold down volume down and sleep/wake button until you see apple logo.
If that does not work, connect it to itunes, then restore.
If none of that helps, you may need to contact apple. Has it gotten wet?
i

HT1551 My remote for my Apple TV just stopped working and I have tried putting in a new battery, re-pairing the remote, resetting the device by unplugging it, and I checked the infared coming from the remote is working. The light just blinks at me 3 times

My remote for my Apple TV just stopped working and I have tried putting in a new battery, re-pairing the remote, resetting the device by unplugging it, and I checked the infared coming from the remote is working. The light just blinks at me 3 times what else can I try to fix it?

Have you tried unpairing the remote? You do this by pointing your remote at the Apple TV and holding the MENU and Left buttons down together for 6 seconds.

Help? My BT Wireless just stopped working (BT Mouse is OK)

Normally the wireless keyboard that came with the iMac (intel) is reliable, its about 4 yrs old now
but today - it just stopped working?
Although it shows (menu) as being connected (BT) and Batteries are at 100%, I can no longer get
keyboard output... and this applies to any running application.
Its not been dropped or mistreated - its just stopped working. I have restarted the iMac but to no avail.
I am using the older USB Keyboard as a stop gap.
My queries are;
     1. Has this keyboard just simply worn out or developed an internal fault ??
     2. Has anyone else experienced this or had similar problems ??
     3. Is there some way I can check the integrity of the BT or the Keyboards communications with the iMac ?
All help to solving this problem - will be most appreciated
Running Mac OSX 10.9.4 on Intel iMac (2CD) 8GB RAM

Hi Barry.
Thanks for your response.....
As mentioned I did restart the iMac which I believe also resets the PR (chime) during that process.
However I will try specifically zapping the PR - several times like the old days and Mac OS 9.
and come back to you

Eraser in CS5 just stopped working

I am working on a floor plan in CS5 Photoshop. Just basically tracing over an original document and erasing what I trace over. I do this all the time and it has been working fine. But now the eraser won't work at all. When i turn off all the layers except the background layer I can erase things, but then when I turn the layers back on, it doesn't show up erased. I've tried resetting the tool and that didn't work. I'm so confused as to why it just stopped working. Any suggestions????

1. Select the Move tool (V) and in the properties bar under the may menu check Auto-Select and make sure Layer is selected on the menu next to it.
2. Click on the spot you want to erase and watch what layer is selected (highlighted) in the Layer's panel. This is the layer blocking the area on a layer below that you want to erase.
I always use the Move tool in Auto-Select mode and when I don't want it I hold Ctrl key down which toggles the mode. So, if the Move tool is with its default setting to not auto select, you can keep it like that and just press Ctrl while clicking with it to temporarily engage the auto-select mode

My 13" macbook just stopped working. When you turn it on you get a white screen and hear a repetitive clicking sound on the left side. Is this the hard drive? Any suggestions on replacement drives?

My 13" macbook just stopped working. When you turn it on you get a white screen and hear a repetitive clicking sound on the left side. Is this the hard drive? Any suggestions on replacement drives?
Thanks

Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

My apple TV remote just stopped working!

My apple TV remote (silver) just stopped working after about 6 months, I replaced the battery and reset the remote by holding the remote close and pointing it at the Apple TV, then holding down the menu and rewind buttons for 6 seconds... still nothing. I sometimes get a sound when I'm putting the battery cover back on but then I try the remote again and it still doesn't work. My older white remotes work fine. My iPhone works fine as a remote with the apple TV.... just not sure what happened to the silver one.
Is anyone else having this problem?
Chantelle

Do you have a mac that recognizes the silver remote?
If you think it has died, walk it into the nearest Apple Store and ask for assistance there.
Good luck in any case.

My click sounds and ringer sounds on my iphone4 just stopped working....what can i do to fix it?

my click sounds and ringer sounds on my iphone4 just stopped working....what can i do to fix it?

Is the mute button on the side of the phone switched on?
Also go to settings, scroll to the bottom and ensure that "Keyboard Clicks" is set to on. Make sure that the "Ringer and Alerts" volume is not set at zero in this menu.

Classic just stopped working?!

Hey guys, i mainly only use os 9 classic for my canon scanner & recently classic has just stopped working. whenever i try to start it, it just sits there in the loading screen, ive left it for a long time & nada. also the other ***** is that canon hasnt made any os x software for this particular scanner, just drivers. ive tried reinstalling that driver & of course hasnt made a difference
any ideas of what to do? is there a way of reinstalling classic? would that solve it?
thanks ahead of time
dale-

thanks again charles. i tried to repair the disk, but
everytime i would verify the disk it would find a
problem (it wouldnt tell me what), but it wouldnt
allow me to repair, it was fogged. i tried restarting
with the install disk & still couldnt find anything.
This sounds as though you have a serious directory problem. If you don't have Disk Warrior, or if DW can't fix the problem, then I'd back everything up. If necessary, buy an external hard drive and get hold of Carbon Copy Cloner or SuperDuper!. Either CCC or SD! will make a complete backup of your system to another volume.
Once you've made the backup, reformat the original volume and restore the backup to it.
so i checked on the apple help site for fixing
classic & all i did to fix classic was reselecting
the system i wanted to start up my computer in the
startup disk menu in system pref. now it works,
messed up.
'Messed up', how?
also i ended up calling apple on getting my computer
to repair my disc & the woman on there told me that
software isnt included in the one year warranty, ***?
Apple has never included software in their one year warranty.
how is hardware which costs money to replace is
covered, but software isnt? it doesnt cost anything &
they should be just as resposible for software as
they are hardware. sorry for the little rant, its
just crazyness
No-body warrants software.
so thanks again charles
no problem.
d-

Nano just stopped working???

My ipod has just stopped working. I was listening to it this morning and there was more than enough charge in it. I go to turn it on now and nothing, checked to make sure it was not locked and still nothing. Connected it up to the computer and it doesn't even see it as and external device - it's just dead. I only purchased this ipod less than 60 days ago. I did have a weird thing happen about 2 weeks ago as well.......the music stopped and all the pictures were scrambled lines all the graphics on the ipod were gone. I did manage to reset and re sync with my computer that time, but I'm thinking maybe I got a lemon? How do I go about getting this issue resolved? Looking forward to anyones suggestions. BTW I did try to take it back to Walmart where I purchased it and they won't take it back after 10 days what a bunch of crap.

Just got this from some else's question about a dead ipod and this worked...Thanks glad I visited the site.
You may need to reset it. So first thing to try is...
Put the hold switch to the OFF/White position. Now toggle it ON/orange then back off again. Then press and hold both the MENU and center buttons on the iPod and hold them for a good 15 seconds or so. Your iPod should reboot starting with the Apple Logo screen.
If it doesn't work the first time, give it a second or third go. Sometimes it takes a few/several tries.
See this thread as an example of what I mean by needing to try it many times...
http://discussions.apple.com/message.jspa?messageID=5065208
http://www.apple.com/support/ipod/five_rs/
Patrick

Applets just stopped working

Java Applets just stopped working on my machine the other day. They now persistently give me a "Failed to Load" message that says "Applet notinited" in it.
I've tried rolling back my machine before Tuesday's Windows Update, but it was VML-related, and probably not the cause of this (plus, the rollback probably would have fixed it if it were the cause). I also tried many different version of the JRE, and removed previous ones entirely before getting new ones. I've tried everything from the latest to older ones, and no luck.
I searched for this error, and Sun points you to proxy settings. Since I have no proxy, and since only my laptop, and not my wife's behind the same router, is affected, I know it can't be that.
Does anyone have any other clues? It's really annoying. And it seems to have happened completely out of the blue. I just can't use Applets any more. I changed no settings and messed with nothing. I'd hate to have to reinstall Windows just to fix Java.

Hi, are you running a macmini Intel?
Launch the Console app [ Applications/Utilities/Utilities folder] do you have any message there regarding Java, and what are they if any?
I presume you have the latest Java updates, and have run your Software update to check?
Do you have these showing in the Safari menu bar under Help>Installed plug ins:
Java Plug-in for Cocoa
Java 1.4.2_09 Plug-in (Cocoa) — from file “JavaPluginCocoa.bundle”.
-------MIME------------Type Description--------Extensions
Java Web Start Applications------application/x-java-jnlp-file---jnlp
application/x-java-applet-------Basic Java Applets-----------javaapplet
Did you recently update Java? see this from Apple.
document
IThank you!! The test account works. Now how to I fix my name account so it works, too?
You are welcome; ) If that doesn't help any...since this is user name account specific problem ONLY,as the test account indicates, see if the advice from Hayne his is post count 7 helps you any. I think it is worth the effort, you may also.
What does this Test tell you.
Does this work work for you showing a wavy? moving line of text
I don't know if any of this will help, I hope so. Good luck!
Happy Holidays to all here!
Eme'~[)
p.s. Spindoctor sorry for your Java problems.
create a new user account and all apps,
No not new apps, just to see is the problem is system wide; )

Clickwheel/Menu buttons stopped working + ASP/Warranty question

Today, my year old 2nd gen nano's clickwheel and menu button stopped working. The hold button works, Itunes sees the thing, disconnecting the headphones does what it supposed to do and everything appears to be in order, except for the buttons. Neither resetting, nor restoring the software did resolve the issue and I am left with a small, elegant, brushed aluminium finished brick with music in it.
Luckily, an Apple ASP isn't particulary far from where I live and I could and probably should bring it there. However, I am currently in a country that is not the one I bought the Ipod in and my purchase receipt and anything else that might have came with it is some 3000 km away.
Does anyone know if bringing just the player to an ASP (it does have a serial number) has any remote chance of getting a warranty repair? And, if not, is it worth it even bothering with the repair, in terms of cost?

Hi Kevinsen and welcome to the BlackBerry Support Community Forums!
I would suggest performing a backup of your BlackBerry® smartphone then reloading the software as shown in the article below:
KB11320 - How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop M...
or
KB19915 - How to perform a clean reload of BlackBerry smartphone application software using BlackBer...
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

I was using Safari , 5 tabs open, when my macbook pro just stopped working .What can i do ??

I was using Safari , 5 tabs open, when my macbook pro just stopped working .What can i do ??

Press the Power button for about 10 seconds to shutdown the computer. Wait a couple of minutes then restart. If it restarts OK, then immediately repair the hard drive:
Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

Wifi just stopped working on an iPhone 4S, iOS 8.1.3. Have reset to factory settings and restored, still no wifi.

Wifi just stopped working on an iPhone 4S, iOS 8.1.3. Have reset to factory settings and restored, still no wifi. Will next release of iOS address this problem?

Hey there kevin8!
I have an article for you that can help you continue to troubleshoot this issue with the Wi-Fi on your iPhone. The article can be found right here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Hopefully that will help resolve your issue. Thanks for using the Apple Support Communities!
Cheers,
Braden

Hi, i have an IPod Touch 4g. One of the earphones just stops working after while,no matter how many times i replace them. What do i do?

Hi, i bought my IPod 4G about 7 months ago. After about a mont of buying them, one the earphones just stopped working which became extremely annoying..so i bought a new set of earphones and they worked well for about 5/6 months and then one of them stopped working as well. About 2 weeks ago, i bought a new set of earphones and now the right earphone of that has stopped working as well. The thing is, the earphone doesnt just stop working on my IPod, it also stops working on my laptop...and now i am very confused as to where the problem lies. I can't keep buying headphones every other week cos that is just too expensive and i dont know if the problem lies with my IPod or what! The same thing is happening to my sister's IPod as they were purchased at the same time. What do we do??

This previous discussion discusses the same if not similar problem.
https://discussions.apple.com/message/6750990#6750990

Menu just stopped working

Similar Messages

Maybe you are looking for