Menu looping doesn't work?!?!?

Hi there,
pls help me in this... I'm a Mac user. I'm had been using encore since 1.5v. Now to CS5 with same setting... How come it doesn't work?
I had created a 30sec video of .mov.
Open up encore. Created a menu at Photoshop and import it into encore as a menu with just the buttons, two of it, 1 and 2, with no background as I wanted to have the 30sec video of .mov as the background. I import the 30sec video into the project panel name background.mov. I pull and drop on to the menu with the Alt key then it will drop in as the background. After that, I then check on the Menu panel >Motion, checked, video is there, audio set as nothing, duration is 30secs, uncheck animate buttons, Loop Point as 00:00:00:00, Loop#: Forever.
Then I burn the disc with a DVD-R.
Test on my DVD Player, it just won't work, the DVD menu just loop once and then it will automatically play the DVD. What's wrong?!? I'm going crazy... If u know my mistake, pls do send me a email at [email protected] I hope is not the software problem...

You're right, startMenu does absolutely nothing.... I saw it
on the adobe video workshop and it didnt refer to anything in their
fla either.. as far as i know..
and yes menu exists on frame 1 of actions, its off the stage
but its there since you told me to make it available...
about the child part, yes it is, Do i have to import the
parent and assign it the child??
i sent you the link to the fla

Similar Messages

Help!! My menu button doesn't work anym

Hi, I have Nomad Zen jukebox usb 2.0 20Gb, suddenly my menu button doesn't work, there is no reaction when i press the menu button, but the other buttons work very well. Without menu button, i can't load any songs, so my mp3 player is useless. As an information, before i cleaned up the playlist, the player can play songs. Any response will be appreciated.
Thanks!

Have you tried resetting the player and running a disk cleanup? To access the Rescue Mode hold down the play button and KEEP it held down, press the tiny reset switch once, and KEEP the play button held down until the player boots into the Rescue Mode. Choose Disk Cleanup from the menu.

Hp2311x menu button doesn't work

I have an hp 2311x monitor. I've been using is with a PC with DVI for a couple of years. I hooked it up to a new computer with VGA only. I can't get the menu to display so that I can change it to VGA. The menu button doesn't work. It did briefly one time, but it didn't take my input. How do I get the menu to come up? This is driving me crazy.

Hello tpferro,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that you are looking to connect your monitor to your computer, and I would be happy to assist you!
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at
http://h30499.www3.hp.com/t5/Monitors/bd-p/bsc-1255
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

HT3176 Menu button doesn't work

Menu button doesn't work I can scroll up and down but when I hit the menu it doesn't even push

This has happened to me before. What has happened (if it is the same problem as mine) is the spinwheel has been shifted. What I did was just poped it back in place. You can do this by just pressing the play/pause button down or the skip buttons, just mess around with it until it pops back in place. Otherwise, I don't know what is wrong with it.

The menu button doesn't work! Please help me!

I own a really cute ipod mini and i love it. But I had some trouble lately...the latest problem: my menu button doesn't work. well, i did everything i could do...reset all setting etc etc. but the problem still persists. Please help me!
Windows XP

I own a really cute ipod mini and i love it. But I
had some trouble lately...the latest problem: my menu
button doesn't work. well, i did everything i could
do...reset all setting etc etc. but the problem still
persists. Please help me!
Windows XP
same thing is happening to mine. i own a silver mini and recently it has been acting skrewy. the backlight goes on and off (without holding MENU and when the setting is at OFF) and the menu button doesnt work too. just today i discovered that when i do the HOLD switch it replaces the MENU process or ability.
PLEASE HELP!

Insert SIM no Signal Menu button doesn't work

Hi,
I have Virgin Nokia 5800 firmware V40, it's currently locked to the Virgin network. When I place another network SIM ( O2 or Orange) the phone boots up but shows no signal and the menu button doesn't work. I want to unlock and have been given a unlock code by Virgin but I'm expecting to see a SIM Restriction message but nothing. Confused - anyone help or had a similar problem?

This has happened to me before. What has happened (if it is the same problem as mine) is the spinwheel has been shifted. What I did was just poped it back in place. You can do this by just pressing the play/pause button down or the skip buttons, just mess around with it until it pops back in place. Otherwise, I don't know what is wrong with it.

Count(*) in the loop doesn't work and I really don't know why...

Hello,
I can't figure out why the following doesn't work. I cannot debug for I do not have privileges on this server.
The execution always fails on bolded line. If I substitute the variable with the table name itself it works. The variable is properly populated in each of the iterations as I can see it by using dbms_output package. The small but may be important detail may be I am connected as user A but the tables are in the schema B. However I can list the tables and their columns in all_tab_cols view and there are synonyms made in my schema which allow me to access the B tables without prefixing them.
I get the error:
Error report:
ORA-00900: invalid SQL statement
ORA-06512: at line 26
00900. 00000 - "invalid SQL statement"
*Cause:
*Action:
I ran out of ideas and I do not have access to any of the Oracle instance to be able to debug right now.
Variable type for v_tables is wrong? I do not have some magic privilege to use execute immediate with variable?
Oracle server has a bad day today?
The crap is 11.1.0.7 if it has anything to do with my problem.
Please help if you can.
Grzegorz
declare
v_number number := 646989;
v_current_table nvarchar2(50);
v_itemno number;
type t is table of nvarchar2(50);
v_tables t;
begin
dbms_output.put_line('Working...');
select table_name bulk collect into v_tables from all_tab_cols where column_name = 'ITEMNO' order by table_name;
for i in 1 .. v_tables.count loop
dbms_output.put_line('Number: ' || i);
v_current_table := v_tables(i);
<b>execute immediate 'select count(*) from ' || v_current_table || ' where itemno = :a' into v_itemno using v_number;</b>
if (v_itemno > 0) then
dbms_output.put_line('Current table contains specific ITEMNO: ' || v_current_table);
end if;
end loop;
end;

In SQL Plus run this and see what SQL is your code returning. Then execute the SQL individually.
set serveroutput on
declare
     v_number number := 646989;
     v_current_table nvarchar2(50);
     v_itemno number;
     type t is table of nvarchar2(50);
     v_tables t;
     lSqlString varchar2(20000);
begin
     select table_name
       bulk collect into v_tables
       from all_tab_cols
      where column_name = 'ITEMNO'
      order by table_name;
     for i in 1 .. v_tables.count loop
          v_current_table := v_tables(i);
          lSqlString := 'select count(*) from ' || v_current_table || ' where itemno = :a';
          dbms_output.put_line(lSqlString);
          --execute immediate lSqlString into v_itemno using v_number;
     end loop;
end;

[SOLVED] openbox menu command doesn't work with &&

I'm now using openbox-session only.
I'd like to run a program after something was done correctly:
zenity --question && killall openbox
I used "obmenu" and it seems that it fixes & to & correctly in the menu.xml.
However, the previous command "zenity" is run only.
In terminal, there's no problem, but it doesn't work with "command" in openbox menu.
<item label="Exit">
<action name="Execute">
<execute>
zenity --question --title="Exit" --text="Are you sure to go back to console?" && killall openbox
</execute>
</action>
</item>
Please, give me any idea. Thank you.
Last edited by mairoo (2009-09-09 10:06:17)

hbekel wrote:
You'll need to use a shell explicitly:
<execute>
sh -c 'command1 && command2'
</execute>
I flagged "solved" thanks to your help. It works good. Thank you.

I have several separators that appeared in my bookmarks list without me adding them. How do I delete them? I already tried right click/cut, right click/delete in the bookmark menu-that doesn't work.

I have several separators that appeared in my bookmarks list without me adding them. How do I delete them? I already tried right click/cut, right click/delete in the bookmark menu and directly on the list-that doesn't work.

If you can't delete them in the normal way in the Bookmarks Manager then you may have a problem with the file places.sqlite.
See http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
See also [[Deleting bookmarks]]

Something strange, menu button doesn't work

Hello,
I have ipod mini 4g.
faw days ago i installed an update that will show me hebrew on my ipod.
The hebrew works but suddenly i discover that the menu button doesn't.
But it's not mechanic problem, because i can do reset.
(middle button+menu button).
Yesterday i discover something really strange,
the key-locker button do the action that the menu button supposed to.
If i lock the keys and then open the lock, the "ipod screen" go to the last screen (I hope u understand what i ment).
I tried to restore the ipod, to install update and non updates, but nothing!
If anyone have an idea- how to format completly and install, or somehow go to the ipod registry??
I bought it in another country and have no support in israel for that.
Plz help.. thx.

hello
A. You do have support in Israel, even if you got your iPod from some place else, like US. You can bring your iPod with the recied to Yeda. For more info you can call 03-9005353
B. If you download the Hebrew from Yeda's site, and now you have problems witht the iPod, you can call the hot line for support 03-9005300.

How can you turn off the spell checker in Firefox? (The menu option doesn't work.)

There was a solution to this I came across a long time ago, but I don't remember what it was. I want to turn off my spell checker in Firefox. The usual instructions given for doing this are to go into Options->Advanced and de-select "Check my spelling as I type". This doesn't work. Period. And this is a bug that has been around for a long time in Firefox.
What's a way to disable this? I don't like seeing a bunch of red lines under correctly spelled words that just happen to not be in Firefox's default dictionary, and I don't want to have to add things to my dictionary either.

Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
*http://kb.mozillazine.org/Preferences_not_saved
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)

MENU button doesn't work and iPod won't turn off!!

For some reason, my menu button won't work nor will my iPod turn off when I hold down the play/pause button.
I've reset it, updated it, restored it and nothing is working. I bought it in the States last year so have no idea how the warranty works or where to get it serviced since I don't live near London.
Any help would be appreciated

Ring your local Apple dealer, My older mini done the same thing several times before it just died on me and never turned back on. So if its still covered under warrenty i seriously think you should ring apple and get it serviced to see whats wrong, it could be just a fault with the click wheel
Try letting the battery run completly dead, then put it into a Wall charger or computer USB cable and then move the hold on and off, then try reseting it by pressing the menu and select buttons at the same time.

TS3274 Menu buttun doesn`t work

Hi, My Ipad2 Menu button is not working? What do I`ve to do...

Reset your device: Hold down the home button along with the sleep/wake button until you see the apple, then let go.

My Firefox 8 Menu button doesn't work and neither does the right click in the firefox window

It seems that all the drop down buttons in the browser, including the bookmarks dropdown menu in the toolbar and the main menu button (firefox button), no longer work. This happened after i upgraded to firefox 8. I've tried uninstalling and reinstalling several times while also deleting user preferences and stuff but that doesnt work. But everything seems to work in safe mode properly. So i disabled all my addons in the normal mode but it still doesn't solve the problem. My right-click doesnt work anywhere in the browser window either. And also, although the menus are not showing, it seems that they are still there because if i click in the area that a button would be in the function activates, this is how i was able to disable the addons.

Perhaps, it's a multi-monitor setup issue. I noticed that the problem happens on my right monitor, but it doesn't happen on my left monitor! I have an nvidia card.

Hotspot Browser Icon Present But Does Not Launch When Clicked; Menu Button Doesn't Work Either When Hotspot Icon Selected

Am very new to Blackberry. The Curve 8900 is my wife's and she asked me to get it working on a new provider plus wifi.
As the long subject says, the Hotspot Browser icon shows on the main menu but when I click on it nothing happens. If I select the Hotspot Browser icon and then press the Menu key, I get kicked into the main menu. Have searched far and wide for the answer to this problem, but no luck. Most posts complaining about the Hotspot Browser are about getting a connection to the Internet. I am not even that far -- the browser simply doesn't load. Any help would be much appreciated.
I have a BB email plan and wifi. The wifi works fine for email with the mobile network turned off, so I know that my Wifi settings are fine.

ankittvarshney wrote:
If this is OS6.0. Try go to options> Advance settings > Browser settings> Disable browser Push!!
I am running OS5.0. But I already tried turning off browser push, and that's the setting on the phone now. No luck yet.
Thanks for your suggestion.

Menu looping doesn't work?!?!?

Similar Messages

Maybe you are looking for